Page 1
KYOCERA SENCO Netherlands BV
Pascallaan 88
8218 NJ Lelystad
The Netherlands
EMEA: www.senco.eu
© 2018 KYOCERA SENCO Industrial Tools, Inc.
DuraSpin ExTPro
NFE2WB • May 30, 2017
ExTPro
Installation Instructions
(Original Instructions)
Page 2
2
Installation guide
To Install a DuraSpin collated screw fastening system, adjust the mounting bracket to the correct position for your tool
type, corded or cordless. Place the rear of the DuraSpin housing into the circular mounting bracket.
INSTALLATION GUIDE
1
2
3
4
POSISTION FOR BATTERY (DC) VERSION
POSITION FOR CORDED (AC) VERSION
Position the front of the DuraSpin tool centrally into the front mounting bracket. Align items 4 with the recess in the
DuraSpin tool housing and tighten cap head screws.
1
2
3
4
5
Page 3
3
PARTS DIAGRAM
S235JRClampblock
P15339_1_324
Hangrip ExtensionP15339_513
Extension pole + handleP15339_212
Mounting bracket DuraspinP15339_111
LengthMaterialDescriptionPart number
Qty
Item
1
2
3
4
5
6
Drawn by:
DOL
21-3-2017
Revision:
Short Description:
Creation date:
Material:
Doc no.:
P15339 Duraspin attachment - Exploded View.dwg
Part number:
P15339
Dimensions:
Third angle projection:
REV
REVISION DATE REVISION REASON
-
2
11-4-2017
Promoted mounting block+bolts to become an additional item (#4)
1
3
2
4
NUMBER PARTNUMBER DESCRIPTION
1 WB0062EU Mounting bracket
2 WB0063EU Extention pole + handle
3 WB0064EU Handgrip extention
4 WB0065EU Mounting blocks
Loading...