EZ55Z3L
0.25 Amp Positive
Voltage Regulators
POWER MANAGEMENT |
|
Description |
Features |
The EZ55Z3L voltage regulators are monolithic integrated circuits designed for use in applications requiring a well regulated positive output voltage with low input-to- output differential voltage requirements.
Outstanding features include full power usage up to 250mA of load current, internal current limiting and thermal shutdown. Safe area protection on the die is also included, providing protection of the series pass transistor under most operating conditions. TO-92 and SOT-223 packages are available for cost effective applications.
υExternal capacitor not required for stability
υLow dropout performance
υFive fixed voltage options: 3.3V, 5V, 9V, 12V, 24V
υAdjustable output down to 1.25V
υLine regulation typically 0.015%
υLoad regulation typically 0.1%
υTO-92 and SOT-223 packages
Typical Application Circuits
Fixed Voltage Regulator |
Adjustable Voltage Regulator |
||||
|
VOUT = |
|
|
R1 |
|
|
1.250 • 1 |
+ |
R2 |
|
|
|
|
|
|
|
Revision 10/2000 |
1 |
www.semtech.com |
|
|
|
|
|
EZ55Z3L |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
POWER MANAGEMENT |
|
|
|
|
|
|
|
|
|
|
|
Absolute Maximum Ratings |
|
|
|
|
|
|
|
|
|
|
|
Parameter |
Symbol |
Maximum |
Units |
||
|
|
|
|
|
|
Operating Input Voltage |
VIN |
VOUT + 10 |
V |
||
Power Dissipation(1) |
PD |
2.5 |
W |
||
Thermal Resistance Junction to Ambient |
|
|
|
|
|
SOT-223 |
qJA |
62.3 |
°C/W |
||
TO-92 |
|
|
132 |
|
|
|
|
|
|
|
|
Thermal Resistance Junction to Case |
|
|
|
|
|
SOT-223 |
qJC |
15 |
°C/W |
||
TO-92 |
|
|
66 |
|
|
|
|
|
|
|
|
Operating Junction Temperature Range |
TJ |
0 to 125 |
°C |
||
|
|
|
|
|
|
Storage Temperature Range |
TSTG |
-65 to 150 |
°C |
||
Lead Temperature (Soldering) 10 Sec. |
TLEAD |
300 |
°C |
||
ESD Rating (Human Body Model) |
VESD |
2 |
kV |
Note:
(1) Specifications are applicable for a power dissipation of 2.5W and are only achievable over a limited range of
VIN - VOUT.
Electrical Characteristics
Unless otherwise specified: (VIN - VOUT) = 1.45V to 10V and IOUT = 10mA to 250mA. Values in bold apply over the full operating temperature range.
Parameter |
Symbol |
|
|
|
Conditions(1) |
Min |
Typ |
Max |
Units |
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
Output Voltage(2) |
V |
OUT |
V |
IN |
= V |
OUT |
+ 3V, I |
= 10mA |
-3% |
V |
OUT |
+3% |
V |
||
|
|
|
|
|
|
OUT |
|
|
|
|
|
||||
Fixed Voltage Version |
|
|
|
|
|
|
|
|
|
|
-4% |
|
|
+4% |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
Reference Voltage(2) |
V |
REF |
V |
IN |
= V |
OUT |
+ 3V, I |
= 10mA |
1.213 |
1.250 |
1.288 |
V |
|||
|
|
|
|
|
|
OUT |
|
|
|
|
|
|
|||
Adj. Voltage Version |
|
|
|
|
|
|
|
|
|
|
1.200 |
|
|
1.300 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
Line Regulation(2) |
REG |
|
|
|
I |
|
= 10mA |
|
|
0.015 |
0.2 |
% |
|||
|
|
(LINE) |
|
|
|
OUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
0.035 |
0.2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
Load Regulation(2) |
REG |
|
|
|
|
V |
IN |
= 3V |
|
|
0.1 |
0.3 |
% |
||
|
|
(LOAD) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
0.2 |
0.4 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
Dropout Voltage |
VD |
|
|
|
|
|
|
|
|
|
1.3 |
1.5 |
V |
||
DVOUT, DVREF = 1% |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Surge Current Limit |
|
IS |
|
|
|
|
|
|
|
|
|
0.5 |
|
A |
|
Quiescent Current |
IQ |
|
|
|
VIN = 10V |
|
|
10 |
15 |
mA |
|||||
Thermal Regulation(3) |
REG |
|
|
|
|
|
|
|
|
|
0.002 |
0.01 |
%/W |
||
|
|
(THERM) |
|
|
|
|
|
|
|
|
|
|
|
|
|
ã 2001 Semtech Corp. |
2 |
www.semtech.com |