You are now the proud owner of a SEIKO Analogue Quartz Watch Cal. 4T53. For best results,
please read the instructions in this booklet carefully before using your SEIKO Analogue Quartz
Watch. Please keep this manual handy for ready reference.
Sie sind jetzt Besitzer einer SEIKO Analog-Quarzuhr Kal. 4T53. Bitte lesen Sie diese
English
Bedie nungsan leitung vor Verwendung der Uhr sorgfältig durch und heben Sie sie gut auf.
Vous voici l’heureux propriétaire d’une montre quartz analogique SEIKO Cal. 4T53. Pour obtenir
d’excellentes performances de cet article SEIKO, veuillez lire attentivement cette brochure que
vous conserverez pour toute référence ultérieure.
Siete ora in possesso di un orologio SEIKO Analogico al Quarzo Cal. 4T53. Per ottenere i migliori
possibili risultati dal Vostro orologio, leggere attentamente le istruzioni di questo manuale prima di
utilizzare il Vostro orologio SEIKO analogico al quarzo. Conservare poi il manuale stesso per ogni
qualsiasi eventuale futuro riferimento.
Enhorabuena por su adquisición de un reloj SEIKO analógico de cuarzo Cal. 4T53. Para óptimo
resultado, lea detenidamente las instrucciones de este folleto antes de usar el reloj. Guarde este
manual para consulta posterior.
Você pode sentir-se orgulhoso de possuir um Relógio SEIKO Quartz Análogo Cal. 4T53. Para obter
os melhores resultados, leia atentamente as instruções contidas neste opúsculo antes de usar o
seu Relógio SEIKO Quartz Análogo. Queira conservar este manual para referências futuras.
Теперь Вы являетесь обладателем Аналоговых Кварцевых часов Seiko, Калибра 4T53. Для
достижения лучших результатов, перед использованием самих часов, пожалуйста, ознакомьтесь
с данной инструкцией и обязательно сохраните ее.
For the care of your watch, see ”TO PRESERVE THE QUALITY OF YOUR
☆
WATCH” in the attached Worldwide Guarantee and Instruction Booklet.
ENGLISH
English
Page 3
CAL. 4T53
DISPLAY AND BUTTONS
English
Hour hand
STO P WATCH
minute hand
Second hand
STO P WATCH
second hand
• Some models may have a screw lock type crown. If your watch does, refer to
the “SCREW LOCK TYPE CROWN” section on the next page.
• Simplified illustrations may be used in the following sections of this manual.
45
Minute hand
A
24-hour hand
a b c
a: Normal position
b: First click
c: Second click
B
Date
CROWN
SCREW LOCK TYPE CROWN
Some models may have a screw-lock mechanism that can securely lock
u
the crown by screw when they are not being op erated.
Locking the crown will help to prevent any operational errors and enhance
u
the water resistant quality of the watch.
It is necessar y to unlock the screw lock type crown before operating it.
u
Once you have finished operating the crown, make sure to relock it.
How to use the screw lock type crown
l
Keep the crown securely locked unles s you need to operate i t.
[How to unlock the screw lock type crown]
Turn the crown counterclock wise.
The crown is unlocke d and can be operate d.
[How to lock the screw lock type crown]
Once you have finished operating the crown, turn it
clockwise while gently pressing it in toward the watch
body until it s tops.
When locking the crown, turn it slowly with care, ensuring that the
screw is properly engaged. Be careful not to forcibly push it in, as
doing so may damage the screw hole in the case.
English
Page 4
ADJUSTING THE HAND POSITION
B efor e set ting t he time, be sure to check that the STO PWATCH han ds are in
l
”0” posi tion when the stopwatch is res et. ( For re set ting the stopwatch, see
”STOPWATCH”)
English
If any of the STOPWATCH hands does not return to ”0” position, follow the
l
procedure below.
STO P WATCH
minute hand
A
B
STOPWATCH second hand
67
CROWN
▼
or
A
▼
CROWN
Pull out to second click.
Press repeatedly to reset
B
STOPWATCH second and
minute hands to the ”0”
position.
• A: The hands move counterclockwise.
B: The hands move clockwise.
• The hands move quickly if the
respective buttons are kept
pressed.
Push back in to normal position.
TIME/CALENDAR SETTING
Hour hand
Second hand
Minute hand
Date
CROWN
Pull out to first click and turn
clockwise until the previous day’s
date appear s.
▼
Pull out to second click when
Second hand is at the 12 o’clock
position.
▼
Turn clock wise until the desired
date appear s.
▼
Set Hour and Minute hands.
▼
Push back in to normal p osition in
accordance with a time signal.
English
Page 5
STOPWATCH
The measured time is indicated by small STOPWATCH hands that move
l
indep endently of the center and 24-hour hands .
English
HOW TO READ THE HANDS
Ex. : 15 minutes and 10 seconds
l
STOPWATCH minute
hand
STOPWATCH second hand
89
STOPWATCH OPERATION
Standard measurement
▼
A
START
Accumulated elapsed time measurement
A
START
Split time measurement
A
START
STOP
▼
STOP
▼
SPLIT
▼
A
A
B
B
RESET
▼
A
RESTART
▼
B
SPLIT
RELEASE
・・・・
・・・・
▼
STOP
▼
STOP
Start / Stop / Restart
A
Reset / Split / Split release
B
▼
A
A
RESET
▼
RESET
B
B
Restart and stop
of the stopwatch
can be repeated by
pressing button A.
Measurement and
release of split time
can be repeated by
pressing button B.
English
Page 6
NOTES ON USING THE WATCH
ADJUSTING THE HAND POSITION
The STO PWATCH minute hand moves in corresponde nce with the STOP WATCH
l
English
second hand.
TIME/CALENDAR SETTING
Before setting the time, be sure to stop and reset the stopwatch.
l
Do not set the date bet ween 9 :0 0 p.m. and 1:0 0 a.m. Otherwise, the date may not
l
change properly. If it is necessary to set the date during that time period, first ch ange
the time to any time outside it, set the date and the n reset the correct tim e.
The 24-hour hand m oves corre spondingly with the hour hand.
l
When setting the hour hand, be sure to check that the 24- hour hand is corre ctly set.
l
When setting the minute hand, advan ce it 4 to 5 minutes ahead of the desired time
l
and then turn it back to the exact time.
Do not press any b utton with the crown at the second click. Other wise, the
l
STOP WATCH hands move and reset ting them is made necessar y.
STOPWATCH
Do not pull out the crow n while the stopwatch is counting. If it is pulled out, the
l
stopwatch o peration cannot b e made.
When the stopwatch is reset , it takes up to 4 0 seconds for the S TOPWATCH second
l
and minute hands to return to ”0” positio n.
1011
BATTERY CHANGE
The miniature battery which powers your watch should last approximately
2 years. However, because the battery is inserted at the factory to check
the function and performance of the watch, its actual life once in your
possession may be less than the specified period. When the battery
expires, be sure to replace it as soon as possible to prevent any malfunction. For battery replacement, we recommend that you contact an
AU THORIZED SEIKO DEALER and request SEIKO SR920SW battery.
• If the stopwatch is used for more than 60 minutes a day, the battery life may be
less than 2 years.
WARNING
Do not remove the battery from the watch.
l
If it is necessary to take out the battery, keep it out of the reach of children.
l
If a child swallows it, consult a doctor immediately.
CAUTION
Never short-circuit, heat or otherwise tamper with the battery, and never ex-
l
pose it to fire. The battery may burst, become very hot or catch fire.
The battery is not rechargeable. Never attempt to recharge it, as this may
l
cause battery leakage or damage to the battery.
English
Page 7
Necessary procedure after battery change
l
When the bat ter y is replaced wit h a new one, the informa tion s tore d in the built-in
IC doe s not corres pond w ith the time actually dis playe d. Bef ore us ing the w atch,
English
there fore, be sure to reset the circui t following the procedure below.
In case any of the hands should move improperly, follow the procedure below to adjust the hand movement.
•
CROWN
A
B
A
A
CROWN
Pull out to second click.
▼
Pres s and hold at the s ame time for
and
B
2 seconds.
STOPWATCH second hand turns counter-
▼
or
▼
clockwise and then returns to where it was.
Press repeatedly to reset
B
STOPWATCH second and minute
hands to the ”0” position.
• A: The hands move counterclockwise.
B: The hands move clockwise.
• The hands move quickly if the respective
buttons are kept pressed.
Turn to set th e time, and then push
back in to normal position .
SPECIFICATIONS
1 Frequency of crystal oscillator .................... 32,768 Hz (Hz = Hertz ... Cycles per second)
2 Loss/gain (monthly rate) ............................. Less than 20 seconds at normal temperature range
3 Operational temperature range ................... -5 ºC to 50 ºC/23 ºF to 122 ºF
4 Driving system ............................................ Step motor, 2 pieces
5 Display system
Time .......................................................... Hour, minute and second hands
Date .......................................................... Displayed in numerals.
Stopwatch ................................................ Minute and second hands