Seiki SE40FY19 Owner’s Manual

,II "1

140 mm 140 mm

SEIKr

Service Hotline:

1-855-MY-SEIKI (1-855-697-3454)

USER MAN UAL

210 mm

Printed in China

Read the User Manual carefully before using the "IV

and keep it for further reference.

r m

CONTENTS

Important Safety Instructions

Safety Information

Preparation

What's Included

Front View Rear View

Installing the Base Stand Removing the Stand for Wall-Mounting

Remote Control

Connecting External Devices

Customizing TV Settings

Initial Setup Navigating the Onscreen Display Selecting Input Source

Picture Settings Audio Settings Time Settings

Setup Settings

Lock Settings

Channel Settings

4 4 5

6 7 7

10 11 12 12

Parental Control

Troubleshooting

Specification

Limited Warranty

IMPORTANT SAFETY INSTRUCTIONS

Read these instructions - All the safety and operating instructions should be read before this product is operated. Keep these instructions - The safety and operating instructions should be retained for future reference.

Heed all warnings -All warnings on the appliance and in the operating instructions should be adhered to. Follow all instructions -All operating and use instructions should be followed.

Do not use this apparatus near water - The appliance should not be used near water or moisture - for example, in a wet basement or near a swimming pool, and the like. Clean only with dry cloth.

Do not block any ventilation openings. Install in accordance with the manufacture's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including

amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade

or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer.

Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart!

apparatus combination to avoid injury from tip-over. Unplug the apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in

any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into

the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Please keep the unit in a well-ventilated environment.

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or

moisture. The apparatus shall not be exposed to dripping or splashing and that objects filled with

liquids, such as vases, shall not be placed on apparatus. WARNING: The batteries shall not be exposed to excessive heat such as sunshine, fire or the like. WARNING: The wall socket plug is used as disconnect device, the disconnect device shall remain

readily operable.

RISQUE CHOC ELECTRIQUE NE

. This lightning flash with arrowhead symbol within an equilateral triangte is intended to

alert the user to the presence of non-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

. Warning: To reduce the risk of electric shock, do not remove cover (or back) as there

are no user-serviceable parts inside. Refer servicing to qualified personnel.

. The exclamation point within an equilateral triangle is intended to alert the user to

the presence of important operating and maintenance instructions in the literature accompanying the appliance.

D his equipment is a Class II or double insulated electrical appliance. It has been designed in such a way

that it does not require a safety connection to electrical earth.

This product contains electrical or electronic materials. The presence of these materials may, if not disposed of properly, have potential adverse effects on the environment and human health. Presence of this label on the product means it should not be disposed of as unsorted waste and must be collected

separately. As a consumer, you are responsible for ensuring that this product is disposed of properly.

H_mm This TV incorporates High-Definition Multimedia Interface (HDMF _) technology. HDMI, the HDMI logo and

_,,', _ ,T'__' H gh-Def n t on Mu t med a nterface are trademarks or reg stered trademarks of HDM L cens ng LLC

SAFETY INFORMATION

To ensure reliable and safe operation of this equipment, please carefully read all the instructions in this user guide, especially the safety information below.

Electrical Safety

• The TV set should only be connected to a main power supply with voltage that matches the label at the rear of the product.

• To prevent overload, do not share the same power supply socket with too many other

electronic components.

• Do not place any connecting wires where they may be stepped on or tripped over.

• Do not place heavy items on any connecting wire, which may damage the wire.

• Hold the main plug, not the wires, when removing from a socket.

• During a thunderstorm or when not in using the television for long periods, turn off the power

switch on the back of the television.

• Do not allow water or moisture to enter the TV or power adapter. Do NOT use in wet, moist

areas, such as bathrooms, steamy kitchens or near swimming pools.

• Pull the plug out immediately, and seek professional help if the main plug or cable is damaged, liquid is spilled onto the set, if the TV set accidentally exposed to water or moisture, if anything

accidentally penetrates the ventilation slots or if the TV set does not work normally.

• Do not remove the safety covers. There are no user serviceable parts inside. Trying to service

the unit yourself is dangerous and may invalidate the product's warranty. Qualified personnel

must only service this apparatus.

• To avoid a battery leakage, remove batteries from the remote control, when the remote is not use for long period, or when the batteries are exhausted.

• Do not break open or throw exhausted batteries into a fire.

Physical Safety

• Do not block ventilation slots in the back cover. You may place the TV in a cabinet, but ensure

at least 5cm (2") clearance all around.

• Do not tap or shake the TV screen, or you may damage the internal circuits. Take good care

of the remote control.

• To clean the TV use a soft dry cloth. Do not use solvents or petroleum based fluids.

• Do not install near any heat sources such as radiators, heat registers, stoves or other

apparatus (including amplifiers) that produce heat.

• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third

grounding prong, the wide blade,or the third prong is provided for your safety. If the provided

plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

• Protect the power cord from being walked on or pinched particularly at plugs.

• Unplug the apparatus during lightning storms or when unused for long periods.

• Refer all servicing to a qualified service personnel.Servicing is required if the apparatus does not operate normally or if the apparatus, including the power supply cord or pulg, has been damaged in any way.

• Servicing is also required if liquid has been spilled, or objacts have fallen into the apparatus;

when the apparatus has been exposed to rain or moisture; or if the apparatus has been

dropped.

• Always connect your television to a power outlet with protective ground connection.

PREPARATION

What's Included

TV Set Remote Control with Batteries

TV Stand

User Manual

Stand Support

User Manual Quick Start Guide

Nine Screws

Quick

Start Guide

Front View

PREPARATION

SEIK _"

"_,L.............................,_ J

1, POWER

Switch the TV between On / Standby mode.

2, SOURCE

Press to select among different input signal sources.

3. MENU Display the OSD (on screen display) menu.

4, CH +/-

Press to select a channel.

5. VOL +/- Press to adjust the volume.

6. IR (infrared Receiver) Receive IR signals from the remote control.

7. POWER indicator

Illuminate blue when the TV is turned on. Illuminate red when the TV isin standby mode.

PREPARATION

Rear View

--0

1. PC AUDIO Input Connect to a computer audio output.

2. VGAInput Connect to a computer or other devices

with a VGA interface.

3. DTV/TV input Connect to the antenna (750 VHF/UHF) socket with the RF coaxial cable.

4. HDMI inputs Connect to a High-Definition (HD) signal

output device.

5. COMPONENT Input Connect to AV devices with component (Y/Pb/Pr) video and audio output

sockets. COMPONENT & VIDEO share with

AUDIO IN (L/R).

6. COAXIAL Digital Audio Output Connect to the audio socket on the digital

audio system.

7. USB Port

Update firmware only,cannot play multimedia files.

8. Headphone Socket Connect to the Headphones.

Installing the Stand

Removing the Stand for Wall-Mounting

PREPARATION

1.Lay the TV face-down on a flat, cushioned surface to avoid damaging

or scratching.

2.Fix the stand support to the TV using the 4 pcs provided screws.

3.Fix the base stand to the TV using

the 5 pcs provided screws.

1.Lay the TV face-down on a flat, cushioned surface to avoid damaging

or scratching.

2.Untighten the 4 pcs screws holding

the stand assembly and remove them.

3.Attach the walt-mount bracket to

the TV using the mounting holes on the back of the TV. Mount this TV

according to the instructions included in the wall-mount bracket,

WARNING: This apparatus is intended to be supported by UL Listed waft mount bracket.

+ 16 hidden pages

Seiki SE40FY19 Owner’s Manual

Specifications and Main Features

Frequently Asked Questions

User Manual