Sega SPORT SHOOTING USA User Manual

OPERATION MANUAL
25" VIDEO GAME
DEDICATED CABINET
FIRST FLOOR, HEALTHAID HOUSE MARLBOROUGH HILL, HARROW MIDDLESEX HA1 1UD TEL: 020 8427 842
WWW
.SAMMYEUROPE.CO.UK
SAMMY GAME CARTRIDGE SYSTEM
Part#: 53-30-300
CONTENTS
1. SPECIFICATIONS OF CABINET............................. 2,3
2. GAME PLAY............................................................. 4
3. GAME SETTING...................................................... 5
4. CALIBRATION OF GUN SCOPE............................ 6
5. SYSTEM BOARD ................................................... 7 to 11
EXPANSION CARTRIDGE SLOT 1 .................................................. 7
JAMMA CONNECTOR TABLE ..................................................
8
SPEAKER VOLUME (SOUND) ..................................................
9
MODEM CONNECTOR (SRL) >>> OPTION ...............................
9
DIP SWITCH (2 POSITIONS) ..................................................
9
STEREO SPEAKER OUTPUT CONNECTOR (OPTION) ............
10
VGA (31KHz) TV SIGNAL OUTPUT CONNECTOR (VDO) >>> OPTION ... 10
GAME CARTRIDGE ................................................................... 11
6. SYSTEM MENU ........................................................ 12 to 18
TEST MODE ............................................................................... 13, 14
COIN SETTING ............................................................................... 15, 16
CONFIGURATION ......................................................................
17
BOOKKEEPING ................................................................................
18
BACKUP CLEAR ......................................................................
18
WIRING DIAGRAM FOR GUN CONTROL PANEL ...................... 19
2
1. SPECIFICATIONS OF CABINET
Push Button Assy Player
1
Push Button Assy Player
2
Sammy Scope Gun Ass
y
Gun Holster, Scope Gun
Part#: 99-50-010
Part#: 99-50-01
1
Part#: 53-50-320
Part#: 53-50-304
SIZE: W = 30" (762 mm)
D = 37" (940 mm) H = 77" (1956 mm)
WEIGHT: 385 lbs (175 kg)
INPUT POWER: USA&CANADA = 120VAC, 60Hz
Instruction Decal Sheet SS USA
Part#: 53-30-210
Marquee, SS USA
Part#: 53-30-100
Side Decal, Atomiswave
Part#: 99-30-200
Speaker
TV Monitor Assy
3
Gun Sub Board
Part#: 53-20-70
0
Main PCB, Atomiswave
Part#: 99-10-010
Game Cartridge, SS USA
Part#: 53-90-850
Remote Controller for Monitor
INSIDE VIEW OF CONTROL PANEL & INSTRUCTION PANEL
Connector Bracket
Gun Sub Harness
INSIDE VIEW OF COIN DOOR
Test & Service Switch Bracket
Mars DBA AE2451 (OPTION)
Coin in counter meter
4
2. GAME PLAY
HIT EACH TARGET!
DON’T SHOOT BLACK AREA!
DON’T SHOOT RED-X TARGET!
Insert coin(s). Shoot using gun scope to select Category from SPEED, PRECISION, MARKSMAN, and TRAINING.
Each DIVISION has 8 stages. Shoot and hit each target to get points. Register your initials when you rank in top 20.
Shoot using gun scope to choose DIVISION from 4 kinds. (OPEN, STANDARD, MODIFIED and REVOLVER. Each division uses a different GUN.)
SPEED: Mainly Steel targets PRECISION: Mainly Human shaped targets MARKSMAN: Mainly Bullseye type targets TRAINING: Mix of above targets. (Easy)
SPEED & PRECISION
(Competitor, Trojan, Edge and Revolver w/compensator)
MARKSMAN
(Grandmaster, Xcaliber, Executive and Revolver w/scope)
3. GAME SETTING
Sports Shooting USA has dedicated GAME SETTINGS. Press TEST switch to display "SYSTEM MENU" screen. Go to "CONFIGURATION" and Select "GAME SETTING." You can adjust following game settings:
LIFE
DIFFICULT(QUALIFY POINT)
2 kinds. (2 or 3) Lose one LIFE when player does not qualify in each stage.
3 kinds. (EASY, NORMAL and HARD) Default is NORMAL.
MERCURY (ball) SWITCH CHECK
2 kinds. (ENABLE or DISABLE) Default is DISABLE. When ENABLE, player must drop Scope Gun down before starting each stage.
AUTO RELOAD
2 kinds. (ENABLE or DISABLE) Default is ENABLE. When DISABLE, player must shoot out of screen to re-road bullets of gun.
COIN SETTING: FACTORY DEFAULTS for Sports Shooting USA:
(NORTH AMERICAN VERSION)
GAME MODE: NORMAL COIN CHUTE TYPE: COMMON PLAYER MODE: 2 PLAYERS COIN CHUTE #A: 2 COINS 1 CREDIT, 2 COINS CONTINUE COIN CHUTE #B: 2 COINS 1 CREDIT, 2 COINS CONTINUE PRESET SITUATION: NORMAL
5
For gun scope calibration, go to "TEST MENU" and select "I/O TEST." Screen shows calibration screen. (Fig.1)
Before Pulling trigger at this screen, please test all of switches, if necessary. Screen shows ON or OFF letters for each switch when they are activated.
After pulling trigger, screen goes to calibration mode. Screen shows a "White square" in the top left corner of screen. (Fig.2) Shoot center of this box using 1 player scope gun.
Then the White Square will move to the right bottom of the screen. (Fig.3) Shoot center of this box using 1 player scope gun.
The White square will move to center of the screen. (Fig.4) Shoot center of this white square using 1 player scope gun to complete 1 player’s gun calibration.
Then the screen will go to 2 player gun calibration automatically. This is the same movements as above 1 player gun adjustment. Shoot each of the 3 positions of White square using 2 player scope gun.
After finished with above, pull trigger to exit I/O test. Please double check gun calibration using normal game mode. Move gun forward and backward then shoot screen. Make sure each gun’s hit mark does not move or jump.
If hit mark moves or jumps, you need monitor adjustment. Lower brightness or contrast of monitor)
NOTE: Once you are in this mode, you can not skip calibration of both guns. If you re-power game during calibration, all settings will revert to previous data.
4. CALIBRATION OF GUN SCOPE
Fig.1
Fig.2
Fig.3
Fig.4
6
White
square
White
squar
e
White
squar
e
Loading...
+ 14 hidden pages