Sega SONIC DASH EXTREME Owner's Manual

IMPORTANT

• Before using this product, read this manual carefully to understand the
contents herein stated.

• After reading this manual, be sure to keep it near the product or in a
convenient place for easy reference when necessary.

OWNER'S MANUALSONIC DASH EXTREME ARCADE

420-0024-01UK

Sega Amusements International Limited.
42 Barwell Business Park, Leatherhead Road, Chessington, Surrey, KT9 2NY. United Kingdom.
Telephone: [phone] Facsimile: [phone]
email: [e-mail] Web: http://www.segaarcade.com

© SEGA

420-0024-01UK

1

st

PRINTING

BEFORE USING THE PRODUCT,

BE SURE TO READ THE FOLLOWING:

To maintain safety:

To ensure the safe operation of this product, be sure to read the following before usage.
The following instructions are intended for the users, operators and the personnel in charge of the
operation of the product. After carefully reading and suffi ciently understanding the warning displays
and cautions, handle the product appropriately. Be sure to keep this manual close to the product or
in a convenient place for future reference.

Herein, explanations which require special attention are enclosed with dual lines. Depending on
the potentially hazardous degrees, the terms of DANGER, WARNING, CAUTION, etc. are used.
Be sure to understand the contents of the displays before reading the text.

Indicates that mishandling the product by disregarding this pictograph will
cause severe injury or death.

Indicates that mishandling the product by disregarding this warning will cause
a potentially hazardous situation which can result in death or serious injury.

Indicates that mishandling the product by disregarding this caution will cause
a slight hazardous situation which can result in personal injury and/or material
damage.

For the safe usage of the product, the following pictographs are used:

Indicates "HANDLE WITH CARE." In order to protect the human body and equipment,
this display is attached to places where the instruction manual should be referred to.

Indicates a "protective earth terminal." Before operating the equipment, be sure to connect
it to the ground.
(The step may be omitted for products in which a power cable with earth is used.)

• Perform work in accordance with the instructions herein stated.

Instructions for work are explained by paying attention to the aspect of accident prevention.

Failing to perform work as per the instructions can cause accidents. In the case where only
those who have technical expertise should perform the work to avoid hazardous situation, the
instructions herein state that the site maintenance personnel should perform such work.

• Be sure to turn off the power before working on the machine.

To prevent an electric shock, be sure to turn off the power and unplug the power cable before

carrying out any work that requires direct contact with the interior of the product. If the work is
to be performed in the power-on status, the instruction manual herein always states to that effect.

• Be sure to ground the earth terminal.
(This is not required in the case where a power cable with earth is used.)

This product is equipped with the earth terminal. When installing the product, connect the earth
terminal to the "accurately grounded indoor earth terminal" by using an earth wire. Unless the
product is grounded appropriately, the user can be subject to an electric shock. After performing
repair, etc. for the control equipment, ensure that the earth wire is fi rmly connected to the control
equipment.

• Ensure that the power supply used is equipped with an earth leakage breaker.

Using a power supply which is not equipped with the earth leakage breaker can cause a fi re when

earth leakage occurs.

• Be sure to use fuses which meet the specifi ed rating.
(Only for the machines which use fuses.)

Using fuses exceeding the specifi ed rating can cause a fi re and an electric shock.

• Specifi cation changes (removal of equipment, conversion and addition) not
designated by SEGA are not allowed.

The parts of the product include warning labels for safety, covers for personal protection, etc. It

is very hazardous to operate the product by removing parts and/or modifying the circuits. Should
doors, lids and protective parts be damaged or lost, refrain from operating the product, and
contact where the product was purchased from or the offi ce herein stated.

SEGA shall not be held responsible for any accidents, compensation for damage to a third party,

resulting from the specifi cations not designated by SEGA.

• Ensure that the product meets the requirements of appropriate electrical
specifi cations.

Before installing the product, check for electrical specifi cations. SEGA products have a

nameplate on which electrical specifi cations are described. Ensure that the product is compatible
with the power supply voltage and frequency requirements of the location. Using any electrical
specifi cations different from the designated specifi cations can cause a fi re and an electric shock.

• Install and operate the product in places where appropriate lighting is available,
allowing warning labels to be clearly read.

To ensure safety for the customers, labels and printed instructions describing potentially

hazardous situations are applied to places where accidents can be caused. Ensure that where the
product is operated has suffi cient lighting allowing the warnings to be read. If any label is peeled
off, apply it again immediately. Please place an order with where the product was purchased from
or the offi ce herein stated.

• When handling the monitor, be very careful.
(Applies only to products with monitors.)

Some of the monitor parts are subject to high tension voltage. Even after turning off the power,

some portions are still subject to high tension voltage sometimes. Monitor repair and replacement
should be performed only by those technical personnel who have knowledge of electricity and
technical expertise.

• Be sure to adjust the monitor properly.
(Applies only to products with monitors.)

Do not operate the product leaving on-screen fl ickering or blurring as it is. Using the product

with the monitor not properly adjusted may cause dizziness or a headache to an operator, a
player, or the customers.

• When transporting or reselling this product, be sure to attach this manual to the
product.

* In the case where commercially available monitors and printers are used in this product, only the

contents relating to this product are explained herein. Some commercially available equipment
has functions and reactions not stated in this manual. Read this manual together with the specifi c
instruction manual of such equipment.

* Descriptions herein contained may be subject to improvement changes without notice.
* The contents described herein are fully prepared with due care. However, should any question

arise or errors be found, please contact SEGA.

INSPECTIONS IMMEDIATELY AFTER TRANSPORTING THE PRODUCT TO THE LOCATION

Normally, at the time of shipment, SEGA products are in a status allowing for usage immediately
after transporting to the location. Nevertheless, an irregular situation may occur during
transportation. Before turning on the power, check the following points to ensure that the product
has been transported in a satisfactory status.

Are there any dented portions or defects (cuts, etc.) on the external surfaces of the cabinet?
Are casters and adjusters damaged?
Do the power supply voltage and frequency requirements meet with those of the location?
Are all wiring connectors correctly and securely connected? Unless connected in the correct way,

connector connections can not be made accurately. Do not insert connectors forcibly.

Do power cables have cuts and dents?
Are all accessories available?
Can all doors and lids be opened with the accessory keys? Can doors and lids be fi rmly closed?

INTRODUCTION

iii

INTRODUCTION

This manual is intended to provide detailed descriptions together with all necessary information covering the general
operation of electronic assemblies, electro-mechanicals, servicing control, spare parts, etc. for the product,
"SONIC DASH EXTREME" Arcade
This manual is intended for the owners, personnel managers in charge of operation of this product.
Operate the product after carefully reading and suffi ciently understanding the instructions.

In the unlikely event that the product does not function correctly, DO NOT allow anyone other than a technician
to touch the internal system. Turn off the power to the machine, making sure to unplug the electrical cord from the
outlet, and contact the offi ce listed below or the point-of-purchase for this product.

Use of this product is unlikely to cause physical injuries or damage to property. However, points that require special
attention are indicated by bold text, the word “IMPORTANT” and the symbol below.

Indicates important information that, if ignored, may result in the mishandling
of the product and cause faulty operation or damage to the product.

Sega Amusements International Limited.

42 Barwell Business Park, Leatherhead Road, Chessington, Surrey, KT9 2NY. United Kingdom.
Telephone: [phone] Facsimile: [phone]
email: [e-mail] Web: http://www.segaarcade.com

SPECIFICATIONS

Standard Cabinet
Machine Dimensions: 1,09m (42.9in.) [Width] x 1.70m (49.2in.) [Depth]
Machine Height: 2.6m (102.3.) (Installed)
Machine Weight: 159kg Approx (Installed)

Power, maximum current: AC115-240V 60~50Hz 1.1A (253W)

iv

INTRODUCTION

Parts replacement, maintenance inspections and troubleshooting should be carried out by site maintenance personnel
or other qualifi ed professionals. This manual includes directions for potentially dangerous procedures which should
only be carried out by professionals with the appropriate specialised knowledge.

The site maintenance personnel or other qualifi ed professionals mentioned in this manual are defi ned as follows:

Site maintenance personnel:
Individuals with experience in maintaining amusement equipment, vending machines, etc., working under the
supervision of the owner/operator of this product to maintain machines within amusement facilities or similar
premises by carrying out everyday procedures such as assembly, maintenance inspections, and replacement of units/
expendable parts.

Activities to be carried out by site maintenance personnel:
Amusement equipment/vending machine assembly, maintenance inspection and replacement of units/expendable
parts.

Other qualifi ed professionals:
Persons employed by amusement equipment manufacturers, or involved in design, production, testing or
maintenance of amusement equipment. The individual should have either graduated from technical school or hold
similar qualifi cations in electrical/electronics/mechanical engineering.

Activities to be carried out by other qualifi ed professionals:
Amusement equipment/vending machine assembly, repair/adjustment of electrical/electronic/mechanical parts.

Defi nition of 'Site Maintenance Personnel or Other Qualifi ed Individuals

Defi nition of 'Site Maintenance Personnel or Other Qualifi ed Individuals

Procedures not described in this manual or marked as ‘to be carried out by site
maintenance personnel or other qualifi ed professionals’ should not be carried
out by personnel without the necessary skill or technology. Work carried out by
unqualifi ed persons may cause serious accidents, including electrocution.

INTRODUCTION

v

Waste of Electrical and Electronic Equipment (WEEE) Statement.

Waste of Electrical and Electronic Equipment (WEEE) Statement.

The WEEE (Waste of Electrical and Electronic Equipment) directive places an obligation on all EU based
manufacturers and importers of Electrical and Electronic Equipment to take back products at the end of their
useful life. Sega Amusements Europe Ltd accepts its responsibility to fi nance the cost of treatment and recovery of
redundant WEEE in the United Kingdom in accordance with the specifi ed WEEE recycling requirements.

The symbol shown below will be on all products manufactured from 13th August 2005, which indicates this product
must NOT be disposed of with other normal waste. Instead, it is the user’s responsibility to dispose of their waste
equipment by arranging to return it to a designated UK collection point for the correct recycling of waste electrical
and electronic equipment.

For more information about where you can send your waste equipment for recycling contact your local authority
offi ce.

For non-UK users contact your local authority offi ce for information on the recycling of Waste Electrical and
Electronic Equipment.

Battery Recycling Statement.

Battery Recycling Statement.

The EC Directive on Batteries and Accumulators (2006/66/EC) aims to minimise the impact of batteries on
the environment and encourage the recovery of the materials they contain. To achieve increased collection and
recycling of waste batteries, the Directive places ‘producer responsibility’ obligations on manufacturers and
importers of portable, industrial and automotive batteries.

The symbol shown below will be on all equipment fi tted with batteries from 26th September 2008 and indicates
they must NOT be disposed of with other normal waste. Instead, it is the user’s responsibility to dispose of used
batteries by arranging to return them to a designated collection point for the correct recycling.

For more information about where you can send your waste batteries for recycling contact your local authority
offi ce.

REGISTERED IN ENGLAND REGISTERED NO. 1711515

REGISTERED OFFICE: BLOCK C 42 BARWELL BUSINESS PARK, CHESSINGTON, SURREY KT9 2NY

MICROSOFT SOFTWARE LICENSE AGREEMENT

WINDOWS EMBEDDED 8 STANDARD

Thank you for choosing a device preinstalled with Windows Embedded 8 Standard. This is a license agreement between you and SEGA. This agreement describes your rights to use the
Windows Embedded 8 Standard software included on this device. The Windows Embedded 8 Standard software also includes any separate media on which you received the software. For
your convenience, we’ve organized this agreement into two parts. The fi rst part includes introductory terms phrased in a question and answer format; the Additional Terms follow and contain
greater detail. You should review the entire agreement, including any linked terms, because all of the terms are important and together create this contract that applies to you. You can review
linked terms by pasting the forward link into your browser window once the software is running. The Additional Terms contain a binding arbitration clause and class action waiver. If

you live in the United States, these affect your rights to resolve a dispute with SEGA, or with Microsoft, and you should read them carefully.
By accepting this agreement or using the software, you agree to all of these terms and consent to the transmission of certain information for Internet-based features of the software.

If you do not accept and comply with these terms, you may not use the software or features. Instead, you may contact SEGA to determine its return policy for a refund or credit under

that policy.
How can I use the software? The software is licensed, not sold. Under this agreement, we grant you the right to install and run one copy only on the device with which you acquired the

software (the licensed device), for use by one person at a time, but only if you comply with all the terms of this agreement. The software is not licensed to be used as server software or for
commercial hosting – so, for example, you may not make the software available for simultaneous use by multiple users over a network. For more information on multiple user scenarios, see
the Additional Terms.

May I make a backup copy? Yes, you may make a single copy of the software for backup purposes, and use that backup copy as described below.
Can I transfer the software to another user? You may transfer the software directly to another user, only with the licensed device. The transfer must include the software, proof of pur-

chase, and, if provided with the device, an authentic Windows label such as the certifi cate of authenticity label, including the product key. You may not keep any copies of the software or any
earlier version. Before any permitted transfer, the other party must agree that this agreement applies to the transfer and use of the software.

Does the software collect my personal information? If you connect your licensed device to the Internet, some features of the software may connect to Microsoft or service provider com­puter systems to send or receive information, including personal information. You may not always receive a separate notice when they connect. If you choose to use any of these features, you
agree to send or receive this information when using that feature. Many of these features can be switched off or you can choose not to use them.

How does Microsoft use your information? Microsoft uses the information it collects through the software features to upgrade or fi x the software and otherwise improve its products and
services. In certain circumstances, Microsoft also shares it with others. For example, Microsoft shares error reports with relevant hardware and software vendors, so that the vendors can use
the information to improve how their products run with Microsoft products. You agree that Microsoft may use and disclose the information as described in Microsoft’s Privacy Statement at
go.microsoft.com/fwlink/?LinkId=190175.

What does this agreement apply to? The Windows Embedded 8 Standard software on this licensed device includes software licensed from Microsoft Corporation or its affi liate. This agree-
ment (including any printed-paper license terms that accompany the software) applies to the software, any separate media on which you received the software, and any Microsoft updates,
supplements, and services for the software, unless other terms come with them.

Are there things I’m not allowed to do with the software? Yes. Because the software is licensed, not sold, SEGA and Microsoft reserve all rights (such as rights under intellectual property
laws) not expressly granted in this agreement. In particular, this license does not give you any right to, and you may not: use features of the software separately; publish, copy (other than the
permitted backup copy), rent, lease, or lend the software; transfer the software (except as permitted by this agreement); attempt to circumvent technical protection measures in the software;
or reverse engineer, decompile, or disassemble the software, except if the laws where you live permit this even when this agreement does not. In that case, you may do only what your law al­lows. When using Internet-based features , you may not use those features in any way that could interfere with anyone else’s use of them, or to try to gain access to any service, data, account,
or network in an unauthorized manner.

ADDITIONAL TERMS

1. License Rights and Use Scenarios

a. Device. In this agreement, “device” means a hardware system with internal storage capable of running the software. The software is licensed to run on up to two
processors on the licensed device at any one time.

b. Specifi c Use. SEGA designed the licensed device for a specifi c use. You may only use the software for that use.

c. Other Software. You may use other programs with the software as long as the other programs

• directly support the specifi c use for the licensed device, or

• provide system utilities, resource management, or anti-virus or similar protection.

Software that provides consumer or business tasks or processes may not run on the licensed device. This includes word processing, spreadsheet, database,
scheduling and personal fi nance software. The licensed device may use terminal services protocols to access such software running on a server.

d. Device connections. You may not use the software as server software. In other words, more than one device may not access, display, run, share or use the soft
ware at the same time. You may allow up to 20 other devices to access the software installed on the licensed device for the purpose of using fi le services, print
services, Internet information services, and Internet connection sharing and telephony services on the licensed device. The 20 connection limit applies to devices
that access the software indirectly through “multiplexing” or other software or hardware that pools connections. You may use unlimited inbound connections at
any time via TCP/IP.

e. Remote Access Technologies. The software contains Remote Desktop and Remote Assistance technologies that enable the software or applications installed on
the licensed device to be accessed remotely from other devices.

• Remote Desktop. The single primary user of the licensed device may access a session from any other device using Remote Desktop or similar tech­nologies. A “session” means the experience of interacting with the software, directly or indirectly, through any combination of input, output and display
peripherals. Other users, one at a time, may access the licensed software running on this host device, from any device using Remote Desktop, but only
if the remote device is separately licensed to run Windows Embedded 8 Standard.

• Remote Assistance. You may use Remote Assistance or similar technologies to share an active session without obtaining any additional licenses for the
software. Remote Assistance allows one user to directly connect to another user’s device, usually to correct problems.

2. Binding Arbitration and Class Action Waiver

a. Application. This Section 2 applies to any dispute EXCEPT IT DOES NOT INCLUDE A DISPUTE RELATING TO THE ENFORCEMENT OR VALIDITY
OF YOUR, SEGA’S, OR EITHER OF OUR LICENSORS’ INTELLECTUAL PROPERTY RIGHTS. Dispute means any dispute, action, or other controversy
between you and SEGA, or you and Microsoft, concerning the software (including its price) or this agreement, whether in contract, warranty, tort, statute,
regulation, ordinance, or any other legal or equitable basis. “Dispute” will be given the broadest possible meaning allowable under law.

b. Notice of Dispute. In the event of a dispute, you or SEGA must give the other a Notice of Dispute, which is a written statement of the name, address, and
contact information of the party giving it, the facts giving rise to the dispute, and the relief requested. Send it by U.S. Mail to SEGA, ATTN: LEGAL DEPART
MENT. SEGA will send any Notice of Dispute to your U.S. Mail address if available, or otherwise to your e-mail address. You and SEGA will attempt to
resolve any dispute through informal negotiation within 60 days from the date the Notice of Dispute is sent. After 60 days, you or SEGA may commence
arbitration.

c. Small claims court. You may also litigate any dispute in small claims court in your county of residence or the SEGA’s principal place of business, if the dispute
meets all requirements to be heard in the small claims court. You may litigate in small claims court whether or not you negotiated informally fi rst.

d. Binding arbitration. If you and SEGA, or Microsoft, do not resolve any dispute by informal negotiation or in small claims court, any other effort to resolve the
dispute will be conducted exclusively by binding arbitration. You are giving up the right to litigate (or participate in as a party or class member) all disputes in
court before a judge or jury. Instead, all disputes will be resolved before a neutral arbitrator, whose decision will be fi nal except for a limited right of appeal
under the Federal Arbitration Act. Any court with jurisdiction over the parties may enforce the arbitrator’s award.

e. Class action waiver. Any proceedings to resolve or litigate any dispute in any forum will be conducted solely on an individual basis. Neither you, SEGA, nor
Microsoft, will seek to have any dispute heard as a class action, as a private attorney general action, or in any other proceeding in which any party acts or pro
poses to act in a representative capacity. No arbitration or proceeding will be combined with another without the prior written consent of all parties to all af
fected arbitrations or proceedings.

f. Arbitration procedure. Any arbitration will be conducted by the American Arbitration Association (the “AAA”), under its Commercial Arbitration Rules.
If you are an individual and use the software for personal or household use, or if the value of the dispute is $75,000 or less whether or not you are an individual
or how you use the software, the AAA Supplementary Procedures for Consumer-Related Disputes will also apply. To commence arbitration, submit a Com
mercial Arbitration Rules Demand for Arbitration form to the AAA. You may request a telephonic or in-person hearing by following the AAA rules. In a dispute
involving $10,000 or less, any hearing will be telephonic unless the arbitrator fi nds good cause to hold an in-person hearing instead. For more information, see
adr.org or call 1-800-778-7879. You agree to commence arbitration only in your county of residence or in the SEGA’s principal place of business. SEGA agrees
to commence arbitration only in your county of residence. The arbitrator may award the same damages to you individually as a court could. The arbitrator may
award declaratory or injunctive relief only to you individually, and only to the extent required to satisfy your individual claim.

vi

MICROSOFT SOFTWARE LICENSE AGREEMENT

g. Arbitration fees and incentives

i. Disputes involving $75,000 or less. SEGA will promptly reimburse your fi ling fees and pay the AAA’s and arbitrator’s fees and expenses. If you
reject the SEGA’s last written settlement offer made before the arbitrator was appointed (“last written offer”), your dispute goes all the way to an
arbitrator’s decision (called an “award”), and the arbitrator awards you more than the last written offer, SEGA will give you three incentives: (1) pay
the greater of the award or $1,000; (2) pay twice your reasonable attorney’s fees, if any; and (3) reimburse any expenses (including expert witness
fees and costs) that your attorney reasonably accrues for investigating, preparing, and pursuing your claim in arbitration. The arbitrator will deter
mine the amounts.

ii. Disputes involving more than $75,000. The AAA rules will govern payment of fi ling fees and the AAA’s and arbitrator’s fees and expenses.

iii. Disputes involving any amount. In any arbitration you commence, SEGA will seek its AAA or arbitrator’s fees and expenses, or your fi ling fees it
reimbursed, only if the arbitrator fi nds the arbitration frivolous or brought for an improper purpose. In any arbitration SEGA commences, it will pay
all fi ling, AAA, and arbitrator’s fees and expenses. It will not seek its attorney’s fees or expenses from you in any arbitration. Fees and expenses are
not counted in determining how much a dispute involves.

h. Claims or disputes must be fi led within one year. To the extent permitted by law, any claim or dispute under this agreement to which Section 2 applies must be
fi led within one year in small claims court (Section 2.c) or in arbitration (Section 2.d). The one-year period begins when the claim or dispute fi rst could be fi led. If
such a claim or dispute is not fi led within one year, it is permanently barred.

i. Severability. If the class action waiver in Section 2.e is found to be illegal or unenforceable as to all or some parts of a dispute, then Section 2 will not apply to those
parts. Instead, those parts will be severed and proceed in a court of law, with the remaining parts proceeding in arbitration. If any other provision of Section 2 is
found to be illegal or unenforceable, that provision will be severed with the remainder of Section 2 remaining in full force and effect.

j. Third-Party Benefi ciary. Microsoft Corporation is not a party to this agreement but is a third-party benefi ciary of your and the SEGA’s agreement to resolve disputes
through informal negotiation and arbitration. If your dispute is with Microsoft, Microsoft agrees to do everything SEGA agrees to do in Section 2, and you agree to
do everything regarding Microsoft that Section 2 requires you to do regarding SEGA. Mail a Notice of Dispute with Microsoft to Microsoft Corporation, ATTN:
LCA ARBITRATION, One Microsoft Way, Redmond, WA 98052-6399. You may commence an arbitration or small claims court case against Microsoft in your
county of residence or King County, Washington.

3. CHOICE OF LAW

The laws of the state or country where you live govern all claims and disputes under this agreement, including breach of contract claims and claims under state consumer protection laws, unfair
competition laws, implied warranty laws, for unjust enrichment, and in tort. If you acquired the software in any other country, the laws of that country apply. This agreement describes certain le­gal rights. You may have other rights, including consumer rights, under the laws of your state or country. You may also have rights with respect to the party from whom you acquired the software.
This agreement does not change those other rights if the laws of your state or country do not permit it to do so.

4. INTERNET-BASED FEATURES; PRIVACY

The following software features use Internet protocols, which send to Microsoft (or its suppliers or service providers) device information, such as your Internet protocol address, the type of
operating system, browser and name and version of the software you are using, and the language code of the device where the software is installed. Microsoft uses this information to make the
Internet-based features available to you, in accordance with the Windows 8 Privacy Statement, at go.microsoft.com/fwlink/?LinkId=190175. Some Internet-based features may be delivered at a
later date via Microsoft’s Windows Update service—if, for example, you acquire an application that relies on one of those services. SEGA may have elected to turn on one or more of the follow­ing features in the licensed device.

a. Windows Update. If you use the Windows Update service in the software, updates or downloads to the Windows Update service will be required for proper func
tioning of the service, from time to time, and will be downloaded and installed without further notice to you.

b. Windows Digital Rights Management technology. Some content owners use Windows digital rights

management technology (WDRM) to protect their copyrights and other intellectual property, including by disabling the software’s ability to play protected content if
WDRM fails. You agree that Microsoft may include a revocation list with the licenses.

c. Windows Media Player. When you use Windows Media Player, it checks with Microsoft for compatible online music services in your region and new versions of
the player. You may only use Windows Media Player as described at go.microsoft.com/fwlink/?LinkId=104605.

d. Windows Defender. If turned on, Windows Defender will search your licensed device for many types of malicious software, including viruses, worms, bots, rootkits,
“spyware”, “adware” and other potentially unwanted software. If it fi nds potentially unwanted software, the software will ask you if you want to ignore, disable
(quarantine) or remove it. If you choose the “recommended” security settings when you fi rst start using the software, such malware and other potentially unwanted
software rated “high” or “severe” will automatically be removed. This removal may result in other software on your licensed device ceasing to work or your breach
ing a license to use that software. It is possible that software that is not unwanted may be removed or disabled. If you use Windows Defender and Windows Update,
Windows Defender is regularly updated through Windows Update.

e. Malicious software removal. If you use Windows Update, at least once each month the software will scan for and remove from y

our licensed device the malware
listed at go.microsoft.com/fwlink/?LinkId=241725. After the scan completes, a report will be sent to Microsoft with specifi c information about malware detected,
errors, and other information about your device. This information is used to improve the software and other Microsoft products. You may disable the software’s
reporting functionality by following the instructions found at go.microsoft.com/fwlink/?LinkId=241725.

f. SmartScreen Filter. If enabled, the SmartScreen Filter will check the addresses of webpages and downloads you attempt to view against a frequently updated list
of webpages and downloads that have been reported to Microsoft as unsafe or suspicious. SmartScreen will also check downloaded programs that you attempt to
run against a list of commonly downloaded or run programs to help you make more informed trust decisions. More information can be found by visiting the Internet
Explorer Privacy Statement go.microsoft.com/fwlink/?LinkId=239590. By enabling SmartScreen in either Windows or Internet Explorer, you consent to this fea
ture, and you agree to use the SmartScreen Filter only in conjunction with Windows or Internet Explorer. You may not, either manually or by enabling or author
izing any software or service, copy, display, distribute, collect or store any data provided by the SmartScreen Filter.

g. IPv6 Network Address Translation (NAT) Traversal service (Teredo). Each time you start your licensed device, Teredo will attempt to locate a public Internet
Protocol version 6 (IPv6) service on the Internet. This occurs automatically when your licensed device is connected to a public or private network, but does not
occur on managed networks such as enterprise domains. If you use a program that requires Teredo to use IPv6 connectivity, or if you confi gure your fi rewall to
always enable IPv6 connectivity, then Teredo will periodically contact the Microsoft Teredo service over the Internet. The only information sent to Microsoft is
standard computer information and the name of the service requested (for example teredo.ipv6.microsoft.com). The information sent from your licensed device by
Teredo is used to determine if your licensed device is connected to the Internet and if it can locate a public IPv6 service. Once the service is located, information is
sent to maintain a connection with the IPv6 service.

h. Plug and Play and Plug and Play Extensions. Your licensed device may not have the drivers needed to communicate with hardware that you connect to your licensed
device. If so, the update feature of the software can obtain and install the correct driver on your licensed device. An administrator can disable this update feature.

i. Digital certifi cates. The software uses digital certifi cates to confi rm the identity of Internet users sending X.509 standard encrypted information, to digitally sign fi les
and macros, and to verify the integrity and origin of fi le contents. The software may retrieve and update certifi cates, certifi cate

revocation lists, and the list of trusted certifi cation authorities, over the Internet.

j. Network awareness. This feature determines whether a system is connected to a network by either passive monitoring of network traffi c or active DNS or HTTP
queries. The query transfers only standard TCP/IP or DNS information for routing purposes. You can switch off the active query feature through a registry setting.

k. Accelerators. When you click on or move your mouse over an Accelerator in Internet Explorer, any of the following may be sent to the applicable service provider
(which may not be Microsoft): the title and full web address or URL of the current webpage, standard computer information, and any content you have selected. For
more information, see go.microsoft.com/fwlink/?LinkId=239590.

l. Search provider update. The software will download an update to the data on your device about search providers. This update upgrades your providers with the
latest features, such as new icons or search suggestions. This is a one-time update, but the software will try to perform the update several times if it does not success
fully download the update. For more information, see go.microsoft.com/fwlink/?LinkId=239590.

m. Cookies. If you choose to use online features in the software, such as online Help and Support, cookies may be set. To learn how to block, control and delete cook
ies, please read the cookies section of the privacy statement at go.microsoft.com/fwlink/?linkId=74170.

n. Customer Experience Improvement Program (CEIP). This software uses CEIP. CEIP automatically sends Microsoft information about your hardware and how you
use this software. We do not use this information to identify or contact you. CEIP will also periodically download a small fi le to your computer. This fi le helps us
collect information about problems that you have while using the software. When available, new help information about the errors might also be automatically
downloaded. To learn more about CEIP, see http://go.microsoft.com/fwlink/?LinkID=52097.

o. Automatic Updates. Software with Click-to-Run technology may check with Microsoft now and then for updates and supplements. If the software fi nds updates and
supplements, it might download and install them on your licensed device.

p. Auto Root Update. The Auto Root Update feature updates the list of trusted certifi cate authorities. You can switch off the Auto Root Update feature.

q. Microsoft Error Reporting Service. This feature helps Microsoft and Windows partners diagnose problems in the software and provide solutions. Not all problems
will have a solution but when a solution is available, it will be offered as a step to solve a problem you have reported or as an update to install. As part of setup and
installation, the Microsoft Error Reporting Service sends to Microsoft information about setup and installation failures in order to attempt to diagnose the problem.
To help prevent problems and make the software more reliable, some solutions are also included in service packs and future versions of the software.

r. Silverlight and Silverlight Software Development Kit. Silverlight contains an Automatic Update feature that is on by default. You may turn off this feature while
Silverlight is running (“opt out”). Unless you expressly opt out of this feature, this feature will

MICROSOFT SOFTWARE LICENSE AGREEMENT

vii

• connect to Microsoft or service provider computer systems over the Internet,

• use Internet protocols to send to the appropriate systems standard computer information, such as

• your computer’s Internet protocol address,

• the type of operating system, browser and name and version of Silverlight you are using, and

• the language code of the device where you installed Silverlight, and

• automatically download and install, or prompt you to download and/or install, current updates to Silverlight.

In some cases, you will not receive a separate notice before this feature takes effect. By installing the software, you consent to the transmission of standard computer information
and the automatic downloading and installation of updates.

s. Microsoft Digital Rights Management. If you use Silverlight to access content that has been protected with Microsoft Digital Rights Management (DRM), in order
to let you play the content, the software may automatically

• request media usage rights from a rights server on the Internet and

• download and install available DRM Updates.

For more information about this feature, including instructions for to turning the Automatic Updates off, go to go.microsoft.com/fwlink/?LinkId=147032.

t. Windows Rights Management Services. The software contains a feature that allows you to create content that cannot be printed, copied or sent to others without
your permission. You must connect to Microsoft to use this feature for the fi rst time. Once a year, you must re-connect to Microsoft to update it. You may choose not
to use this feature.

u. Windows Time Service. This service synchronizes with time.windows.com once a week to provide your licensed device with the correct time. You can turn this
feature off or choose your preferred time source within the Date and Time Control Panel applet. The connection uses standard NTP protocol.

v. Windows (or Microsoft) Update Feature. You may connect new hardware to the licensed device. Your licensed device may not have the drivers needed to communi
cate with that hardware. If so, the update feature of the software can obtain the correct driver from Microsoft and install it on your licensed device. You can switch
off this update feature.

5. PROOF OF LICENSE

The elements of a valid license include a genuine product key, successful activation of the software, an authentic Windows label such as a Certifi cate of Authenticity (COA), and proof of
purchase from a supplier of genuine Microsoft software. A valid license may also include a Windows activation fi le installed on the licensed device by SEGA. If there is a COA or other Windows
label, it must be affi xed to the licensed device or appear on the SEGA’s software packaging or peripherals when purchased. If you receive an authenticity label separate from your licensed device,
it does not establish proof of license. For further information about Microsoft genuine software, see howtotell.com.

6. UPDATES AND UPGRADES

You may only obtain updates or upgrades for the software from Microsoft or authorized sources. You may not be able to obtain certain updates or upgrades from SEGA, or Microsoft, if your
copy of the software is improperly licensed. Certain upgrades, support, and other services may be offered only to users of genuine Microsoft software. For more information about Genuine
Windows, see go.microsoft.com/fwlink/?LinkId=104612.

To use upgrade software, you must fi rst be licensed for the software that is eligible for the upgrade. Upon upgrade, this agreement takes the place of the agreement for the software you upgraded
from. After you upgrade, you may no longer use the software you upgraded from.

7. FONTS, ICONS, IMAGES, AND SOUNDS

a. Font components. While the software is running, you may use its fonts to display and print content. You may temporarily download the fonts to a printer or other
output device to print content, and you may embed fonts in content only as permitted by the embedding restrictions in the fonts.

b. Icons, images, and sounds. While the software is running, you may access and use its icons, images, sounds, and media only from the licensed device. You may not
share the sample images, sounds and media provided with the software or use them for any other purpose.

8. .NET FRAMEWORK

The software includes one or more components of the .NET Framework, which you may use only as described at go.microsoft.com/fwlink/?LinkId=66406 if you use the .NET Framework
components to conduct internal benchmark testing.

9. VHD BOOT. Additional copies of the software created using the software’s Virtual Hard Disk functionality (“VHD
Image”) may be pre-installed on the physical hard disk of the licensed device. These VHD Images may only be used for maintaining or updating the software installed on the physical hard disk
or drive. If the VHD Image is the only software on your device, it may be used as the primary operating system but all other copies of the VHD Image may only be used for maintenance and
updating.

10. NOT FAULT TOLERANT. The software is not fault tolerant. SEGA installed the software on the licensed device and is responsible for how it operates on the device.

11. RESTRICTED USE. The Microsoft software was not designed for systems that require fault-tolerant performance. You may not use the Microsoft software in any device or system in which

a failure or fault of any kind of the software could reasonably be seen to lead to death or serious injury of any person, or to severe physical or environmental damage.

12. EXPORT RESTRICTIONS. You must also comply with all domestic and international export laws and regulations that apply to the software, which include restrictions on destinations, end
users, and end use. For further information on geographic and export restrictions, visit go.microsoft.com/fwlink/?LinkId=141397 and microsoft.com/exporting.

13. NO WARRANTIES FOR THE SOFTWARE. The software is provided “as is”. You bear all risks of using it. Microsoft gives no express warranties, guarantees or conditions. Any warran­ties you receive regarding the licensed device or the software do not originate from, and are not binding on, Microsoft or its affi liates. When allowed by your local laws, SEGA and Microsoft
exclude implied warranties of merchantability, fi tness for a particular purpose and non-infringement.

14. LIABILITY LIMITATIONS. You can recover from Microsoft and its affi liates only direct damages up to two hundred fi fty U.S. Dollars (U.S. $250.00), or equivalent in local currency. You
cannot recover any other damages, including consequential, lost profi ts, special, indirect or incidental damages.

This limitation applies to:

· anything related to the software, services, content (including code) on third party internet sites, or third party programs, and

· claims for breach of contract, breach of warranty, guarantee or condition, strict liability, negligence, or other tort to the extent permitted by applicable law.

It also applies even if Microsoft should have been aware of the possibility of the damages. The above limitation may not apply to you because your country may not allow the exclusion or limita­tion of incidental, consequential or other damages.

15. REFUND PROCEDURES

If you are seeking a refund, contact SEGA to determine its return policy for a refund or credit. You must comply with that policy, which might require you to return the software with the entire
licensed device on which the software is installed for a refund.

16. ENTIRE AGREEMENT

This agreement (together with printed-paper license terms or other terms accompanying any software supplements, updates, and services that are provided by SEGA, or Microsoft, and that
you use), and the terms contained in web links listed in this agreement, are the entire agreement for the software and any such supplements, updates, and services (unless SEGA, or Microsoft,
provides other terms with such supplements, updates, or services).

17. FOR AUSTRALIA ONLY. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and
compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not
amount to a major failure. Goods presented for repair may be replaced by refurbished goods of the same type rather than being replaced. Refurbished parts may be used to repair the goods.

For further information regarding this warranty and to claim expenses in relation to the warranty (if applicable), please contact the manufacturer or installer; see the contact information provided
in the system packaging.

viii

MICROSOFT SOFTWARE LICENSE AGREEMENT

LIST OF 3

rd

PARTY RIGHTS

ix

x

TABLEOFCONTENTS

INTRODUCTION iii

1

HANDLING PRECAUTIONS 1

2

PRECAUTIONS REGARDING INSTALLATION 4

3 PRECAUTIONS REGARDING OPERATION 7

4 PART DESCRIPTIONS 10

5 ACCESSORIES 11

6 ASSEMBLY AND INSTALLATION 12

6-1 INSTALLING THE CABINET 13
6-2 FIXATION TO SITE 17
6-3 POWER SUPPLY AND OTHER CONNECTIONS 19
6-4 TURNING ON THE POWER 20
6-5 CONFIRMATION OF ASSEMBLY 22
6-6 APPLYING WARNING LABELS (EPILEPTIFORM SEIZURES) 23

7 PRECAUTIONS WHEN MOVING THE MACHINE 24

7-1 PRECAUTIONS WHEN MOVING FROM SITE 25

8 GAME DESCRIPTION 26

8-1 HOW TO PLAY 26

9 EXPLANATION OF TEST AND DATA DISPLAY 33

9-1 SWITCH UNIT AND COIN METER. 34
9-2 SYSTEM TEST MODE 35
9-3 SYSTEM INFORMATION 37
9-4 STORAGE INFORMATION 39
9-5 JVS TEST 41
9-6 MONITOR TEST 44
9-7 SPEAKER TEST 45
9-8 COIN ASSIGNMENTS 46
9-9 CLOCK SETTING 52
9-10 NETWORK SETTING 54
9-11 GAME TEST MENU 58
9-12 BOOKKEEPING 59
9-13 INPUT TEST 64
9-14 OUTPUT TEST 65
9-15 TICKET TEST 66
9-16 GAME ASSIGNMENTS 67
9-17 TICKET SETTINGS 69
9-18 BONUS SETTINGS 70
9-19 DIFFICULTY SETTINGS 71
9-20 BACKUP DATA CLEAR 72
9-21 TICKET ERROR 73

xi

10 CONTROLLER UNIT(S) 74

10-1 REMOVING THE CONTROLLER 75

11 GRAPHICS DISPLAY 78

11-1 SAFETY PRECAUTIONS WHEN HANDLING THE MONITOR 78

12 COIN HANDLING 84

12-1 CLEANING THE COIN SELECTOR 84
12-2 FAULT FINDING 87
12-3 ADJUSTING THE PRICE OF PLAY (EXCEL) 88

13 LAMPS AND LIGHTING 92

13-1 COIN DOOR LAMP 92
13-2 BILLBOARD LED LIGHTING 93
13-3 HALF HOOP LED LIGHTING 95
13-4 FULL HOOP LED LIGHTING 97

14 PERIODIC INSPECTION 99

15 TROUBLESHOOTING 101

15-1

TROUBLESHOOTING (WHEN NO ERROR MESSAGE IS SHOWN) 101

16 GAME BOARD (NuSX) 104

16-1 HANDLING PRECAUTIONS 105
16-2 GAME BOARD (NuSX) - LOCATION 106
16-3 NuSX CLEANING 107
16-4 REPLACING THE LITHIUM BATTERY 108
16-5 NuSX CONNECTIONS 113
16-6 ERROR CODES 114

17 DESIGN RELATED PARTS 123

18 PARTS LIST 124

19 COLOUR CODE TABLE 145

20 SCHEMATIC DIAGRAMS 146

xii

This page intentially left blank

HANDLING PRECAUTIONS

1

1

1

1

HANDLING PRECAUTIONS

When installing or inspecting the machine, be very careful of the following points and pay attention to ensure that
the player can enjoy the game safely.
Non-compliance with the following points or inappropriate handling running counter to the cautionary matters
herein stated can cause personal injury or damage to the machine.

● Proceed with checks and tasks as indicated in these instructions. If instructions
are not followed, or if tasks and/or checks are neglected, an electric shock or
other very serious accident, even fatal accident can occur. Also, customers
could be injured while operation the product.

● Before performing work, be sure to turn the power off. Performing the work with­out turning the power off can cause an electric shock or short circuit. In cases
where work should be performed in the status of power on, this manual always
states to that effect.

● To avoid an electric shock or short circuit, do not plug in or unplug quickly.

● To avoid an electric shock, do not plug in or unplug with a wet hand.

● Do not expose power cords or earth wires on the surface, (fl oor, passage, etc.)

If exposed, the power cords and earth wires are susceptible to damage. Dam­aged cords and wires can cause an electric shock or short circuit.

● To avoid causing a fi re or an electric shock, do not put things on or damage
the power cords.

● When or after installing the product, do not unnecessarily pull the power cord. If
damaged, the power cord can cause a fi re or an electric shock.

● In case the power cord is damaged, ask for a replacement through where the
product was purchased from or the offi ce herein stated. Using the cord as is
damaged can cause fi re, an electric shock or leakage.

● Be sure to perform grounding appropriately. Inappropriate grounding can
cause an electric shock.

● Be sure to use fuses meeting the specifi ed rating. Using fuses exceeding the
specifi ed rating can cause a fi re or an electric shock.

● Be sure that connections such as IC BD are made properly. Insuffi cient insertion
can cause an electric shock.

● Specifi cation changes, removal of equipment, conversion and/or addition, not
designated by SEGA are not permitted.

- Failure to observe this may cause a fi re or an electric shock. Non-compliance
with this instruction can have a bad infl uence upon physical conditions of the
players or the onlookers, or result in injury during play.

- SEGA shall not be held responsible for damage, compensation for damage to
a third party, caused by specifi cation changes not designated by SEGA.

● Do not perform any work or change parts not listed in this manual. Doing so
may lead to an accident.

2

HANDLING PRECAUTIONS

1

1

For the IC board circuit inspections, only the use of a logic tester is
recommended. Using a Multi Tester or General Purpose Tester may result in
damage to IC Circuits.

Static electricity from your body may damage some electronics devices
on the IC board. Before handling the IC board, touch a grounded metallic
surface so that the static electricity can be discharged.

This video gaming cabinet utilises a motorised steering feedback system.
Do not attempt to service this part or any other part in close proximity to the
steering mechanism whilst power is applied.

Some parts are not designed and manufactured specifically for this game
machine. The manufacturers may discontinue, or change the specifi cations of
such general-purpose parts. If this is the case, SEGA cannot repair or replace
a failed game machine whether or not a warranty period has expired.

● If you need to perform any work not listed in this manual, request work from the
offi ce indicated in this manual or the point of purchase, or inquires for details.

● Be sure to perform periodic maintenance inspections herein stated.

● Do not touch undesignated places. Touching places not designated can cause

an electric shock or short circuit.

● Whenever any fasteners (e.g. screws, nuts) have been lost, be sure to use re­placement fasteners with the proper dimensions as specified in this manual.
If fasteners or any other fi xings are used which do not correspond with the di-
mensions as outlined in this manual it may cause damage and/or separation of
parts that may result in secondary accidents.

● When connecting a connector, check the direction carefully. Connectors must
be connected in only one direction. If indiscriminate loads are applied in mak­ing connections, the connector to its terminal fi xtures could be damaged, re-
sulting in electric shock, short circuit or fi res.

HANDLING PRECAUTIONS

3

1

1

CONCERNING THE STICKER DISPLAY

This SEGA product has stickers attached describing the product manufacture No. (Serial No.) and Electrical
Specifi cations. It also has a Sticker describing where to contact for repair and for purchasing parts.
When inquiring about or asking for repairs, mention the Serial No. and Name of Machine indicated on the Sticker.
The Serial Number indicates the product register. Identical machines could have different parts depending on the
date of production. Also, improvements and modifi cations might have been made after the publication of this
manual. In order to ensure you order the correct parts, mention the Serial No. when contacting the applicable places.

CONCERNING WARNING DISPLAYS

This SEGA product has warning displays on stickers, labels and/or printed instructions adhered/attached to or
incorporated in the places where a potentially hazardous situation could arise. The warning displays are intended
for accident prevention for customers and for avoiding hazardous situations relating to maintenance and servicing
work. Some portions of the cabinet contain high voltage and may cause accidents if touched. When performing
maintenance, be very careful of the warning displays. It is especially important that any complex repair and
replacement work not mentioned herein should be performed by those technical personnel who have knowledge of
electricity and technical expertise.
In order to prevent accidents, caution any customer ignoring the warnings to cease and desist immediately.

If you or your child have experienced a convulsive attack, loss of
consciousness, etc. due to light stimulus or TV games, or fear that you
might experience such symptoms, be very careful of using this
machine.

If you feel sick while playing the game, immediately discontinue use
and take a rest.

4

PRECAUTIONS REGARDING INSTALLATION LOCATION

2

2

2

PRECAUTIONS REGARDING INSTALLATION

• This product is an indoor game machine. Do not install it outside. Even indoors,

avoid installing in places mentioned below so as not to cause a fi re, electric
shock, injury and/or malfunction.

• Places subject to rain or water leakage, or places subject to high humidity in

the proximity of an indoor swimming pool and/or shower, etc.

• Places subject to direct sunlight, or places subject to high temperatures in the

proximity of heating units, etc.

• Places filled with inflammable gas or vicinity of highly inflammable/volatile

chemicals or hazardous matter.

• Dusty places.

• Sloped surfaces.

• Places subject to any type of violent impact.

• Vicinity of anti-disaster facilities such as fi re exits and fi re extinguishers.

• Areas where the temperature exceeds the applicable temperature (ambient

temperature) range of 5 to 30 degrees centigrade.

LIMITATIONS OF USAGE

• Be sure to check the Electrical Specifications. Ensure that this product

is compatible with the location's power supply, voltage, and frequency
requirements. A plate describing Electrical Specifi cations is attached to the
product. Non-compliance with the Electrical Specifi cations can cause a fi re
and electric shock.

• This product requires a breaker and earth mechanism as part of the location

facilities. Using the product without these can cause a fi re and electric shock.

• Ensure that the indoor wiring for the power supply is rated at 15 A or higher

(AC single phase 100 V ~ 120 V area), and 7 A or higher (AC 220 V ~ 240 V
area). Non-compliance with the Electrical Specifi cations can cause a fi re and
electric shock.

• Be sure to use an independent power supply equipped with an earth leakage

breaker. Using a power supply without an earth leakage breaker can cause
an outbreak of fi re if a power surge occurs.

• Putting many loads on one electrical outlet can cause generation of heat and

a fi re resulting from overload.

• When using an extension cord, ensure that the cord is rated at 15 A or higher

(AC 100 V ~ 120 V area) and 7 A or higher (AC 220 V ~ 240 V area). Using a
cord rated lower than the specifi ed rating can cause a fi re and electric shock.

PRECAUTIONS REGARDING INSTALLATION LOCATION

5

2

2

OPERA TION AREA

Securing a safe area for operation as described in this manual will ensure
safe operation for players and observers.

SEGA shall not be held responsible for damage or compensation for damage
to a third party, resulting from the failure to observe this instruction.

For the operation of this machine, secure a minimum area of 1.7m (W) x 2.0m (D).

Be sure to provide suffi cient space specifi ed in this manual. Do not allow objects
to block the ventilation ports. It can cause generation of heat and a fi re.

Suffi cient space either side of the playing area must be allowed for the player to
enter or exit the game safely.

1700mm

2000mm

200mm

300mm

6

PRECAUTIONS REGARDING INSTALLATION LOCATION

2

2

To install this product, the entrance must be at least 1.2m in width and 2.1 m
in height (without Assy Billboard) and 2.7m (with Assy Billboard).

Do not attempt to push/pull whilst holding onto the Assy Billboard. This may
result in part damage and or personal injury.

PRECAUTIONS REGARDING PRODUCT OPERATION

7

3

3

3 PRECAUTIONS REGARDING OPERATION

To avoid injury and trouble, be sure to pay attention to the behavior of visitors and players.

In order to avoid accidents, check the following before starting the operation:

• To ensure maximum safety for the players and the customers, ensure that
where the product is operated has suffi cient lighting to allow any warnings to be
read. Operation under insuffi cient lighting can cause bodily contact with each
other, hitting accident, and/or trouble between customers.

• Be sure to perform appropriate adjustment of the display (LCD, Plasma, CRT
or Projector). For operation of this machine, do not leave monitor's fl ickering or
deviation as is. Failure to observe this can have a bad infl uence upon the players'
or the customers' physical conditions.

• It is suggested to ensure a space allowing the players who feel sick while
playing the game to take a rest.

• Check if all of the adjusters are in contact with the surface. If they are not, the
Cabinet can move and cause an accident.

• Do not put any heavy item on this product. Items, if placed on this product
may fall and cause injury to the player / observer.

• Do not climb on the product. Climbing on the product can cause falling down
accidents. To check the top portion of the product, use a step ladder.

Each leg adjuster MUST be lowered so that the
casters are raised approximately 5mm off the
fl oor.

8

PRECAUTIONS REGARDING PRODUCT OPERATION

3

3

It is recommended that wet towels (paper towels) be provided.

• To avoid electric shock, ensure that all covers and panels are undamaged

and fi tted. Do not operate with covers removed.

• To avoid electric shock, short circuit and/or parts damage, do not put the

following items on or in the periphery of the product.

Flower vases, flowerpots, cups, water tanks, cosmetics, and receptacles/
containers/vessels containing chemicals and water.

• To avoid injury, be sure to provide sufficient space by considering the

potentially crowded situation at the installation location. Insufficient installation
space can cause making bodily contact with each other, hitting accidents, and/
or trouble between customers.

• Everyday when cleaning the Controller, inspect the controller and make sure

that there are no cracks in the surface, and that the fastening screws are not
loose. If the game is played with cracks or loose screws, it can cause injuries to
the player.

• Do not allow more than one person to play the game at any one time.

Frequent checks to the controller for and signs of dmaage or wear and tear.

PRECAUTIONS REGARDING PRODUCT OPERATION

9

3

3

To avoid injury and trouble, be sure to constantly give careful attention to the behavior and manner of the visitors
and players.

• For safety reasons, do not allow any of the following people to play the game.

- Those who have high blood pressure or a heart problem.

- Those who have experienced muscle convulsion or loss of consciousness
when playing video games, etc.

- Those who have neck or spinal cord problems.

- Those who are intoxicated or under the infl uence of drugs.

- Pregnant women.

- Those who are not in good health.

- Those who do not follow the attendant’s instructions.

- Those who cannot grasp the Control Unit securely because of immobility in
fi ngers, hands or arms.

- Persons who disregard the product's warning displays.

• This product is intended for a single player only. Having two or more persons
simultaneously playing this product can result to injury to the player and possible
damage to the product.

• Even players who have never been adversely affected by light stimulus might
experience dizziness or headache depending on their physical condition
when playing the game.

• Small children are especially likely to experience these symptoms. Caution
guardians of small children to keep watch on their children during play.

• Instruct those who feel sick during play to have a medical examination.

• To avoid injury from falls and electric shocks due to spilled drinks, instruct the
player not to place heavy items or drinks on the product.

• To avoid electric shocks and short circuits, do not allow customers to put
hands and fi ngers or extraneous matter in the openings of the product or small
openings in or around the doors.

• To avoid falls and resulting injury, immediately stop the customer from leaning
against or climbing on the product, etc.

• To avoid electric shock and short circuit, do not allow customers to unplug the
power plug without a justifi able reason.

• Instruct the guardians of small children to keep an eye on their children.

• Children cannot sense danger. Allowing small children to get near a player
who is playing the game could result in the children being bumped, struck or
knocked down.

DURING OPERATION (PAYING ATTENTION TO CUSTOMERS)

10

PART DESCRIPTIONS

4

4

4 PART DESCRIPTIONS

Billboard

Half Hoop L

Half Hoop R

55” LED Screen

Full Hoop L

Speakers

Full Hoop R

STS Secure Door

Ticket Door

Stabilisers

Double Framed Mini
Door (DFMD)

Controller

Dash Button

ACCESSORIES

11

5

5

5 ACCESSORIES

Confi rm that the accessories listed in the table below are present when setting up the product.
Accessories marked “Spare” in the note column are consumable items but included as spares.

DESCRIPTION: OWNER’S MANUAL
Part No. (Qty.):

420-0024-01UK(1)

Parts not labeled with part numbers are as yet
unregistered or cannot be registered. Be sure to handle
all parts with care, as some parts are not available for
purchase separately.

KEY MASTER
220-5575-01UK (2)
For operating/closing the doors

KEY
(2)

For the cashbox door
(Located inside the coin chute door at time of
shipment)

POWER CORD

LM1227 (1) <UK>

LM1226 (1) <EU>

For installation. See chapter 6.

440-CS0186UK

Sticker C Epilepsy Multi (1)

12

ASSEMBLY AND INSTALLATION

6

6

6 ASSEMBLY AND INSTALLATION

• Perform assembly work by following the procedure herein stated. Failure to
comply with the instructions can cause electric shock.

• Perform assembly as per this manual. Since this is a complex machine,
incorrect assembling can cause an electric shock, machine damage and/or
improper functioning as per specifi ed performance.

• When assembling, more than one person is required. Depending on the
assembly work, there are some cases in which working by one person alone
can cause personal injury or parts damage.

• Ensure that connectors are properly connected. Improper connections can
cause electric shock.

• Be careful not to damage the wires. Damaged wires may cause electric shock
or short circuit or present a risk of fi re.

• Do not unnecessarily push the display screen.

• This work should be carried out by site maintenance personnel or other
qualifi ed professionals. Work performed by non-technical personnel can cause
a severe accident such as electric shock. Failing to comply with this instruction
can cause a severe accident such as electric shock to the player during
operation. If no one with proper technological expertise is available, request
service from the offi ce indicated in this document or the point of purchase so
as to ensure safety.

• Provide suffi cient space so that assembling can be performed. Performing
work in places with narrow space or low ceiling may cause an accident and
assembly work to be diffi cult.

• To perform work safely and avoid serious accident such as the cabinet falling
down, do not perform work in places where step-like grade differences, a
ditch, or slope exist.

• This product does not use any connectors other than those connected to and
used by the game board when it leaves the factory. Do not needlessly connect
wires to unused connectors. This could lead to overheating, generation of
smoke and burn related injuries.

• Handle molded parts with care. Excessive weight or pressure may cause them
to break and the broken pieces may cause injury.

• To perform the operation safely and accurately you must use a safe, steady
footstool or stepladder. Working without this may lead to a fall and possible
injury.

ASSEMBLY AND INSTALLATION

13

6

6

Tools required for installation:

• To perform work safely and securely, be sure to prepare a step which is in a
safe and stable condition. Performing work without using a step may lead to
injury of damage to components.

Allen Key (M8) (Not Supplied)

- Attaching ASSY BILLBOARD to cabinet

- Attaching BKT CABI LOWER

Allen Key (M4) (Not Supplied)

- Attaching ASSY Billboard to cabinet

Step or Ladders

- Aid in fi xing Billboard and Billboard Panel.

Adjustable Wrench

- Secure cabinet into position.

KEY

- Gain access to Coin Tower

6-1 INSTALLING THE CABINET

14

ASSEMBLY AND INSTALLATION

6

6

1

The Billboard is separately wrapped along with the cabinet and needs to be applied prior install..

2

Using a Step Ladder or Stool, raise the ASSY BILLBOARD and align with the fi xing holes at the top of the

cabinet.

6-1-1 INSTALLING THE ASSY BILLBOARD

Assy Billboard - SND 0500UK

ASSEMBLY AND INSTALLATION

15

6

6

3

Once in position, secure the ASSY BILLBOARD at the rear of the cabinet using (6) M8x25 SKT CAP

Screws and washers (029-B00825-0B/060-S00800-0B/068-852216-0B)

4

Fit and secure the remaining 2 fi xings at the front of the ASSY BILLBOARD using (2) M4x12 SKT CAP

Screws and washers.

5

Once the ASSY BILLBOARD is secure, make the connection to the cabinet where shown.
Make sure that there are no trailing cables. Any loose cables must be secure to the ASSY BILLBOARD

brackets.

x6

x2

Fixing locations

M8x20 Socket Cap Screws

029-B00825-0B

M4 WSHR 16OD FLT BLK

068-441614-0B

M4x12 SKT BH BLK

029-B00412-0B

ASSY BILLBOARD lighting harness

M8 WSHR 22OD FLT BLK

068-852216-0B

M8 WSHR SPR BLK
060-S00800-0B

Fixing Points

Conection Point

16

ASSEMBLY AND INSTALLATION

6

6

6

Apply the BKT CABI LOWER to both side of the cabinet as shown. Secure using (4) M8x25 SKT CAP

Screws and washers (029-B00825-0B/060-S00800-0B/068-852216-0B)

Fixing Points

BKT CABI LOWER (2)

PD-1002UK

BKT CABI LOWER (2)

PD-1002UK

• Due the nature and the design of the cabinet it is IMPORTANT that the CABINET
LOWER BRACKETS are fi tted to both sides of the cabinet. These brackets, when
fi tted provide the cabinet with extra stability. Failing to apply these brackets to
the cabinet may render the cabinet unstable.

x4

M8x20 Socket Cap Screws

029-B00825-0B

M8 WSHR 22OD FLT BLK

068-852216-0B

M8 WSHR SPR BLK
060-S00800-0B

ASSEMBLY AND INSTALLATION

17

6

6

• Make sure that all the adjusters contact the fl oor. Otherwise the cabinet could
move, causing an accident.

• Provide a ventilation space at least 20cm wide behind the cabinet. There are
ventilation holes on the back of the cabinet. Do not block the ventilation holes.
Doing so could trap heat inside resulting in fi re. It could also result in equipment
damage or cause parts to become exhausted prematurely.

The product is equipped with 4 casters and 4 adjusters.

When installation position / site has been determined, have the adjusters come in direct contact with the floor.
Establish a gap of about 5 mm between the fl oor and the casters and adjust the unit so that it will remain level.

1 Move the product to the installation site.

2 Bring the adjusters into direct contact with the fl oor. Use a wrench to align the height of the adjusters until the
cabinet is perfectly level.

3 After setting, turn adjuster nuts upwards to tighten them and secure adjuster heights.

Approx. 5 mm

ADJUSTER

Fasten the nuts in an
upward direction.

ADJUSTER

CASTER

6-2 FIXATION TO SITE

/(*$'-867(5

/(*$'-867(5

/(*$'-867(5

/(*$'-867(5

&DVWRU

&DVWRU

&DVWRU

&DVWRU