Sega ROYAL BUMBLIE User Manual

1ST PRINTING NOV 00

SEGA ENTERPRISES, INC. USA

Standard Version

Owner’s Manual

MANUAL NO. 4201-6609-01

Warranty

Your new Sega Product is covered for a period of 90 days from the date of shipment. This certifies
that the Printed Circuit Boards, Power Supplies and Monitor are to be free of defects in workman­ship or materials under normal operating conditions. This also certifies that all Interactive Control
Assemblies are to be free from defects in workmanship and materials under normal operating condi­tions. No other product in this machine is hereby covered.

Sellers sole liability in the event a warranted part described above fails shall be, at its option, to
replace or repair the defective part during the warranty period. For Warranty claims, contact your
Sega Distributor.

Should the Seller determine, by inspection that the product was caused by Accident, Misuse, Ne­glect, Alteration, Improper Repair, Installation or Testing, the warranty offered will be null and void.

Under no circumstances is the Seller responsible for any loss of profits, loss of use, or other dam­ages.

This shall be the exclusive written Warranty of the original purchaser expressed in lieu of all other
warranties expressed or implied. Under no circumstance shall it extend beyond the period of time
listed above.

BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING:

To maintain the safety:

To ensure the safe usage of the product, be sure to read the following before using the product. The following
instructions are intended for the users, operators and the personnel in charge of the operation of the product.
After carefully reading and sufficiently understanding the warning displays and cautions, handle the product
appropriately. Be sure to keep this manual nearby the product or elsewhere convenient for referring to it
when necessary.

Herein, explanations which require special attention are enclosed with dual lines. Depending on the poten­tially hazardous degrees, the terms of WARNING, CAUTION, etc. are used. Be sure to understand the
contents of the displays before reading the text.

Indicates that mishandling the
product by disregarding this
warning will cause a potentially
hazardous situation which can
result in death or serious injury.

For the sage usage of the product, the following pictographs are used:

Indicates “HANDLE WITH CARE.” In order to protect the human body an equipment, this
display is attached to places where the Owner’s Manual and or Service Manual should be referred
to.

Perform work in accordance with the instructions herein stated.

Instructions for work are explained by paying attention to the aspect of accident prevention. Failing to
perform work as per the instructions can cause accidents. In the case where only those who have techni­cal expertise should perform the work to avoid hazardous situation, the instructions herein state that the
serviceman should perform such work.

Be sure to turn off power before working on the machine.

To prevent electric shock, be sure to turn off power before starting the work in which the worker touches
the interior of the product. If the work is to be performed in the power-on status, the Instruction Manual
herein always states to that effect.

Be sure to ground the Earth Terminal (this, however, is not required in the case where a power cord
with earth is used).
This product is equipped with the Earth Terminal. When installing the product, Connect the Earth Termi­nal to the “accurately grounded indoor earth terminal” by using an earth wire. Unless the product is
grounded appropriately, the user can be subject to electric shock. After performing repair, etc. for the
Control equipment, ensure that the Earth Wire is firmly connected to the Control equipment.

Indicates that mishandling the product
by disregarding this caution will cause
a slight hazardous situation which can
result in personal injury and or material
damage.

Ensure that the Power Supply used is equipped with an Earth Leakage Breaker.

This product does not incorporate the Earth Leakage Breaker. Using a power supply which is not
equipped with the Earth Leakage Breaker can cause a fire when earth leakage occurs.

Be sure to use fuses which meet the specified rating. (only for the machines which use fuses).
Using fuses exceeding the specified rating can cause a fire and electric shock.

Specification changes (removal of equipment, conversion and addition) not designated by SEGA
are not allowed.

The parts of the product include warning labels for safety, covers for personal protection, etc. It is very
hazardous to operate the product by removing parts and or modifying the circuits. Should doors, lids
and protective parts be damaged or lost, refrain from operating the product, and contact where the
product was purchased from or the office herein stated. SEGA shall not be held responsible for any
accidents, compensation for damage to a third party, resulting from the specifications not designated by
SEGA.

Ensure that the product meets the requirements of appropriate Electrical Specifications.

Before installing the product, check for Electrical Specifications. SEGA products have a nameplate on
which Electrical Specifications are described. Ensure that the product is compatible with the power
supply voltage and frequency requirements of the location. Using any Electrical Specifications different
from the designated Specifications can cause a fire and electric shock.

Install and operate the product in places where appropriate lighting is available, allowing warning
labels to be clearly read.

To ensure safety for the customers, labels and printed instructions describing potentially hazardous
situation are applied to places where accidents can be caused. Ensure that where the product is operated
has sufficient lighting allowing the warnings to be read. If any label is peeled off, apply it again imme­diately. Please place an order with where the product was purchased from or the office herein stated.

When handling the Monitor, be very careful. (Applies only to the product w/monitor.)

Some of the monitor (TV) parts are subject to high tension voltage. Even after running off power, some
portions are still subject to high tension voltage sometimes. Monitor repair and replacement should be
performed only be those technical personnel who have knowledge of electricity and technical expertise.

Be sure to adjust the monitor (projector) properly. (Applies only to the product w/monitor.)

Do not operate the product leaving on-screen flickering or blurring as it is. Using the product with the
monitor not properly adjusted may cause dizziness or a headache to an operator, a player, or the custom­ers.

When transporting or reselling this product, be sure to attach this manual to the product.

In the case where commercially available monitors and printers are used in this product, only the
contents relating to this product are explained herein. Some commercially available equipment has
functions and reactions not stated in this manual. Read this manual together with the specific Instruc­tion Manual of such equipment.

•

Descriptions herein contained may be subject to improvement changes without notice.

•

The contents described herein are fully prepared with due care. However, should any question arise or
errors be found, please contact SEGA.

INSPECTIONS IMMEDIATELY AFTER TRANSPORTING THE PRODUCT TO THE LOCATION.

Normally, at the time of shipment, SEGA products are in a status allowing for usage immediately after
transporting to the location. Nevertheless, an irregular situation may occur during transportation. Before
turning on power, check the following points to ensure that the product has been transported in a satisfac­tory status.
Are there any dented portions or defects (cuts, etc.) on the external surfaces of the cabinet?
Are Casters and Adjusters, damaged?
Do the power supply voltage and frequency requirements meet with those of the location?
Are all wiring connectors correctly and securely connected? Unless connected in the correct direction,
connector connections can not be made accurately. Do not insert connectors forcibly.
Do power cords have cuts and dents?
Do the fuses used meet specified rating? Is the Circuit Protector in an energized status?
Are all accessories available?
Can all Doors and Lids be opened with the Accessory keys? Can Doors and Lids be firmly closed?

TABLE OF CONTENTS

BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING:

1. HANDLING PRECAUTIONS ............................................................... 2

2. HOW TO PLAY ...................................................................................... 3 - 6

3. TEST MODE .......................................................................................... 7 - 10

A. SYSTEM MENU
B. GAME TEST MODE

INPUT TEST

1

Switch input test is performed.
GAME ASSIGNMENTS

2

Various settings such as game difficulty, etc. can be set.
BOOKKEEPING

3

Allows for checking data such as the number of coins inserted, operation time, game

time, etc.

BACKUP DATA CLEAR

4

Clears the contents of BOOKKEEPING.

4. GAME BOARD ...................................................................................... 11

5. COIN SELECTOR .................................................................................. 12 - 13

6. DESIGN RELATED PARTS ................................................................... 14 - 15

7. PARTS LIST ............................................................................................ 16 - 19

8. WIRE COLOR CODE TABLE ............................................................... 20

9. WIRING DIAGRAM .............................................................................. 21 - 22

Use of this product is unlikely to cause physical injuries or damages to property. However,
where special attention is required this is indicated by a thick line, the word “IMPORTANT”
and its sign in this manual.

Indicates that mishandling the product by disregarding this display can cause the
product’s intrinsic performance not to be obtained, resulting in malfunctioning.

If this is used on the cabinet such as BLAST CITY, MEGALO 410,

etc., whose coin chute is used in common with Player 1 and Player 2,
be sure to change the setting of COIN CHUTE TYPE from
INDIVIDUAL to COMMON in the COIN ASSIGNMENTS. If the
game is played on such cabinets with the COIN CHUTE TYPE set to
INDIVIDUAL, the game can not be played at Player 2 side. As for
COIN ASSIGNMENTS, refer to NAOMI SERVICE MANUAL.

When power is turned on for the first time, be sure to enter into the

TEST MODE to check in the INPUT TEST if INPUT device is
satisfactory.

1

1. HANDLING PRECAUTIONS

To prevent electric shock or IC Board malfunctioning, be sure to turn off the

power for the cabinet when installing or removing the IC Board.

Extraneous matter such as dust on the IC Board can cause the IC Board to generate

heat and result in a fire due to short circuit, etc. Ensure the IC Board surfaces are
always kept clean.

Use NAOMI for the cabinets compatible with JVS. Using NAOMI for the cabinet

other than those compatible with JVS can cause generation of heat and a fire.

Be sure to connect the IC Board and connectors completely. Insufficient insertion

can damage IC Board, etc.

For the IC Board circuit inspection, only the use of Logic Tester is permitted.

The use of ordinary testers is not permitted as these can damage the IC Board.

Do not subject the IC Board to static electricity when installing the IC Board in

the cabinet or when connecting wire harness connectors to the IC Board.

When soldering buttons, etc. to the wire harnesses, be sure to remove the wire

harnesses from the IC Board so as not to subject the IC Board to heat.

Using NAOMI without the Shield Case can cause electric wave trouble. Be sure

to use NAOMI together with the accessory Shield Case.

The monitor frequency corresponding to NAOMI is 15 kHz or 31 kHz. NAOMI

can not be used for the cabinet incorporating a monitor or projector not
corresponding to 15 kHz or 31 kHz.

Concerning the display of JAMMA VIDEO STANDARD:

JAMMA VIDEO STANDARD adopted by NAOMI is referred to as JVS. As against this
Standard, the conventional JAMMA STANDARD which employs 56P Edge Connectors adopted
by ST-V, etc. is displayed as Old JAMMA STANDARD.

The specific Manual attached to each game sometimes displays JVS as JV STANDARD, New
JAMMA STANDARD, or JAMMA 2 STANDARD AGAINST OLD JAMMA STANDARD as
JAMMA STANDARD, JS, etc.

The contents herein described are subject to change without notice.

2

2. HOW TO PLAY

ON-SCREEN DISPLAY

Monitor Position

HORIZONTAL

15/31 kHz

CONTROL PANEL

Moving of Wrestlers

Synchronous Frequency

Attack Button

Grapple Button

Support Button

GA S

Attack Button

Grapple Button

Enables a wrestler to punch and kick an opponent.

Enables a wrestler to grapple an opponent. Also enables a wrestler to
throw, or swing onto the ropes, an opponent after grappling.

Support Button Enables a wrestler to take an action other than attacking and grappling;

that is, to run, mount to a corner, guard, and block.

Available Playing Modes

Two playing modes are available.

Exhibition Mode

This enables you to play a 10-game tournament. You choose a wrestler as yourself and a partner
wrestler, and specify the attacks allowed for the partner; thus you may use your own vital techniques as
well as the various partner attacks in the game. Additional wrestler (from the CPU) may unexpectedly
burst into the ring or you may happen to move to a variety of stages; thus several game effects are
prepared.
Maximum 4 wrestlers can play simultaneously. In this case all the wrestlers other than yourself (as a
wrestler) may be opponents; you may attack one of them together with the rest of them; or any one of
the supporting wrestlers may suddenly betray you. Thus you can enjoy a heated and thrilling game.

Royal Ramble Mode

This enables you to join in a battle royal of maximum 9 persons on the ring. Maximum 4 wrestlers can
play. Any wrestlers fallen from the ring is disqualified. The bottom center part of the monitor screen
shows the number of persons to clear; new wrestlers will continue to appear on the ring until the
number becomes 0 (zero). The number counts down only if the playing wrestlers make the CPU
wrestler fallen from the ring. Winning wrestlers are those who still remain on the ring when the number
is 0 (zero). Furthermore, the high-level S wrestlers may burst into the ring when the number of persons
to clear approaches to 0 (zero).

3

Basic Operations

Attack Button

This button enables you to punch and kick an opponent. Press the button repeatedly to attack
without a break.

Grapple Button

This button enables you to grapple an opponent and then make him staggered or groggy,
throw him or swing him onto the ropes. The button also enables you to throw down or squeeze
a downed opponent. Furthermore, the button enables you to pick up a weapon on the stage
other than the ring.

Support Button

This button enables you to run into the directions set by the lever; and then you may use the
attack and/or grapple buttons to battle. If you are nearby the corner, you may set the lever into
the direction of the post, press the button to mount to the corner, and use the attack and/or
grapple button to battle. Also, you may hold down the button to guard yourself against an
opponent’s offences. In addition, you may press the button in a timely manner against an
opponent’s offence thereby to counterattack. Finally the button enables you to pinfall a downed
opponent.

Button Operations after Grappling

Pressing the Attack Button after Grappling

This action enables you to make an opponent groggy (defenseless). This action, if taken
while setting the lever into any desired direction, enables you to make an opponent staggered
(also, defenseless) into the set direction. Press the attack button again to punch or kick the
groggy or staggered opponent while the grapple button to throw. In these cases, the oppornent
cannot counterattack.

Pressing the Grapple Button after Grappling

This action, if taken while setting the lever into any of the neutral/upper/lower/left/right
directions, enables you to throw a grappled opponent even if grappled in the rear.

Pressing the Support Button after Grappling

This action enables you to swing or hammer-throw an opponent onto the ropes. After swinging,
press the attack or grapple button to battle. Alternately set the lever into any desired directions
to swing the opponent into the set direction. Set it into a slant direction to swing the opponent
to the corner in the set direction and thus make the opponent corner-down. Grapple, and then
punch, kick, or throw the corner-downed opponent.

NOTE: When grappled you can counterattack by pressing the button same as the one opponent
is pressing.

4