Seco-Larm SD-991A-D1Q Specsheet

SECO-LARM

®

U.S.A., Inc.

16842 Millikan Avenue, Irvine, CA 92606

Copyright © 2017 SECO-LARM U.S.A., Inc. All rights reserved. All trademarks are the property of

SECO-LARM U.S.A., Inc. or their respective owners. The SECO-LARM policy is one of continual development. For that reason,

SECO-LARM reserves the right to change specifications without notice. SECO-LARM is not responsible for misprints.

Phone: [phone] | [phone] Fax: [phone]

Website: www.seco-larm.com Email: [e-mail]

PI_SD-991A-D1Q_170418.docx

Mini No-Cut Electric Door Strike

SD-991A-D1Q

12VDC, Fail-Secure, Non-Handed Design

Also Available from SECO-LARM®:

Bronze-Colored Aluminum

Low-Cut Strike Plate for SD-991A-D1Q

No-Cut Electric Door Strike

SD-991RA-61Q/B

SD-993C-D3Q

Dimensions:

Stainless Steel No-Cut Strike Plate

SD-991SS-61Q/S

1

/2"

(13mm)

15

/16"

(24mm)

1

/16"

(2mm)

23/4" (70mm)

11/8"

(28mm)

13/4"

(45mm)

11/8"

(28mm)

11/2"

(38mm)

21/8" (54mm)

Silver-Colored Aluminum

Low-Cut*Strike Plate (included)

 Converts cylindrical lock sets into an electronic

access-controlled locking system

 Fail-secure operation - Door remains locked if power to the

strike is lost

 2-wire installation, non-polarized connection
 Stainless steel keeper for strength and long life
 Includes Stainless Steel No-Cut and Silver-Colored Aluminum

Low-Cut* Strike Plates

 Can be used with virtually any cylindrical door locking system
 Can be used with an optional digital keypad, pushbutton

switch, and other entry devices.

 Suitable for office-type applications
 Reversible non-handed design fits either right-hand or

left-hand doors

 Shallow design for use with most metal doors
 Powered by a solenoid, not a buzzer coil
 For indoor use
 Optional Bronze-Colored Aluminum Low-Cut* Strike Plate

(SD-991RA-61Q/B) available

*Fits most metal or wood doors with minimum cutting of door frame
beyond the hole for the strike

Features:

Specifications:

Operating voltage

12VDC

Current draw

280mA@12VDC

Static Strength

1,000-lb (454kg)

Endurance

250,000 Cycles (Factory tested)

Latch throw 1/2" (13mm)

Keeper
width

SD-991SS-61Q/S

11/8" (28mm)

SD-991RA-61Q/A or B

13/16" (30mm)

Operating humidity

0~85% (Non-condensing)

Operating temperature

14°~120° F (-10°~49° C)

Bronze-Colored Aluminum

Low-Cut* Strike Plate (optional)