Seametrics PD10,PD10W,PD10M Instructions Manual

PD10

PULSE DIVIDER
INSTRUCTIONS

PD10 PULSE DIVIDER INSTRUCTIONS

9001:2008

ISO

CERTIFIED COMPANY

GENERAL INFORMATION & SPECIFICATIONS

Designed for use as a meter accessory, the PD10 divider is
used primarily for pacing electronic metering pumps. Any
number from one to 9999 can be set on rotary switches.
Each time the divider has received the set number of pulses
from the meter, it puts out one pulse to stroke the pump.
The PD10 is also useful in boiler and cooling tower feed and
bleed operations, and for lowering frequency output of high

frequency meters. Compatible with all Seametrics ow meters,

the PD10 creates a programmable pulse meter with an easily
adjustable pulse rate.

FEATURES

Protective cover

Rotary Switches (4)

Mounting Holes:
(Double-backed pressure-sensitive
tape also supplied standard)

The PD10 comes in two different housings: an enclosure that
can be mounted near the pump, and a watertight housing for
mounting on the meter.

Potted for environmental
protection

Wall (Pump) housing shown
(Meter mount also available)

To leads or metering
pump connector

SPECIFICATIONS*

Page 2

Enclosure Wall (Pump) Mount

Meter Mount

Temperature

Divider Range

Setting Mechanism

Power

Maximum Sensor Load

Maximum Input Frequency

Maximum Output Frequency

Output

Output Pulse Width

Input Connection Wall Mount

Meter Mount

Output Connection Wall Mount

Meter Mount

*Specications subject to change • Please consult our website for current data (www.seametrics.com).

Epoxy-encapsulated ABS housing with cover

Cast aluminum sealed housing

0˚ to 130˚ F (-18˚ to 55˚ C)

1 to 9999

Rotary switches

7 - 30 Vdc @ 4 mA

20 mA

350 Hz (pulses/second)

8 Hz (pulses/second)

Solid state relay; 0-250 V, 170 mA max AC/DC

0.1 second

Seametrics connector

Terminal

Pump connector on 24 inch lead

Comes with 18 foot lead

Input connector for
Seametrics meter connector