FEATURES
9001:2008
CERTIFIED COMPANY
ISO
• Easily adjustable rotary switches
• Mates with LMI and other common
metering pumps
• Flexible relay contact output
APPLICATIONS
• Pace electronic metering pumps
• Boiler/cooling tower feed and bleed
• Lower frequency output of high
frequency meters
PD10
Pulse Divider
GENERAL INFORMATION
Designed for use as a meter accessory, the PD10 divider is
used primarily for pacing electronic metering pumps. Any
number from one to 9999 can be set on rotary switches.
Each time the divider has received the set number of pulses
from the meter, it puts out one pulse to stroke the pump.
The PD10 is also useful in boiler and cooling tower feed and
bleed operations, and for lowering frequency output of high
frequency meters. Compatible with all Seametrics ow meters,
the PD10 creates a programmable pulse meter with an easily
adjustable pulse rate.
Wall (Pump) Mount Shown
The PD10 comes in two different housings: an enclosure that
can be mounted near the pump, and a watertight housing for
mounting on the meter.
Power for the PD10 can be supplied by the metering pump if
the pump has a sensor power supply. This is the case with
LMI externally-paced metering pumps. Some pumps require
an external power supply, available from Seametrics. LMI
and Seametrics connectors are available.
FEATURES
Protective cover
Rotary Switches (4)
Mounting Holes:
(Double-backed pressure-sensitive
tape also supplied standard)
Potted for environmental
protection
Wall (Pump) housing
(Meter mount also available)
PD10
Pulse Divider
2’ cable to leads or
metering pump
connector
SPECIFICATIONS*
Enclosure Wall (Pump) Mount
Meter Mount
Temperature
Divider Range
Setting Mechanism
Power
Maximum Sensor Load
Maximum Input Frequency
Maximum Output Frequency
Output
Output Pulse Width
Input Connection Wall Mount
Meter Mount
Output Connection Wall Mount
Meter Mount
*Specications subject to change • Please consult our website for current data (www.seametrics.com).
Seametrics connector for
plug-in meter connection
Epoxy-encapsulated ABS housing with cover
Cast aluminum sealed housing
0˚ to 130˚ F (-18˚ to 55˚ C)
1 to 9999
Rotary switches
7 - 30 Vdc @ 4 mA
20 mA
350 Hz (pulses/second)
8 Hz (pulses/second)
Solid state relay; 0-250 V, 170 mA max AC/DC
0.1 second
Seametrics connector
Terminal
Pump connector on 24 inch lead
Comes with 18 foot lead
5.1"
1"
DIMENSIONS
3.89"
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
8
(Set Leading Switches To Zero)
PD10
Pulse Divider
PD10W
2.7"
PD10M
PD10
To adjust divider, disconnectfrompower
then removecover and setswitches
4.625"
2.57"
1/2"
Female NPT
ROTARY SWITCHES
The PD10 allows very easy changing of pulse rates using rotary
switches. The four numbered rotary switches marked "1000",
"100", "10", and "1" control the ratio of meter pulses to pump
strokes, simply by rotating the dials to the appropriate setting.
In the examples below, the pumps would stroke once when the
meter pulses 1521 times, or 8 times, respectively.
HOW TO ORDER
MODEL MOUNTING OPTIONS
PD10
Pulse Divider
PD10
ACCESSORIES
Plug-in power converter, 100-115 Vac, 24 Vdc (powered applications only) = PC3
Cable, 2 connector, LMI pump, 12 feet (PD10M only) = 100039
CONTACT YOUR SUPPLIER
Wall Mount = W
Meter mount = See appropriate
meter specication to order meter
mounted units.
LMI pump connector, 5 pin = -106
LMI pump connector, 4 pin is Included
Seametrics Incorporated • 19026 72nd Avenue South • Kent, Washington 98032 • USA
(P) 253.872.0284 • (F) 253.872.0285 • 1.800.975.8153 • www.seametrics.com
LT-65650014-081314
8/13/14
Loading...