Seametrics IP110, IP210 Specifications

Download

Page 1

IP100/200-SERIES

INSERTION PADDLEWHEEL FLOW SENSOR

APPLICATIONS

Clean water

Large pipes

Aquariums, water parks

IP11x/21x

(Shown with optional externally powered electronics)

Features

• Wide ow range

• One moving part

• Hot tap available

• Modular electronics

compatible

• Easily depth adjustable

for 3” to 40” pipe

Water & wastewater

monitoring

IP15x/25x

(Shown with optional battery powered electronics)

The IP100/200-Series are adjustable depth insertion paddlewheels that

come in brass, PVC, or 316 stainless models to t 3” to 40” pipe. Adapters mate with standard 1-1/2” (11x/21x) or 2” (15x/25x), or PVC (11x/21x) NPT threaded ttings such as saddles and weldolets which may be purchased either locally or from Seametrics.

Ruby bearings and a non-drag Hall-effect sensor give these meters the widest ow range of any of the paddlewheel types. A sensor detects the passage of miniature magnets in the six rotor blades. The resulting square-wave signal can be sent for hundreds of feet over unshielded cable without a transmitter and connected directly to many PLC’s and other controls without any additional electronics.

A modular system of electronics can be installed directly on the ow sensor or mounted remotely. The FT430 (externally powered with pulse), FT440 (loop powered), and FT450 (battery powered) all provide digital rate and total displays, as well as a programmable pulse; the FT440 also provides a 4-20 mA analog output. The AO55 is a blind analog (4-20 mA) transmitter. Programmable pulse for pump pacing is available with the PD10 (available as wall-mounted unit only).

The “hot-tap” models (IP15x/25x) can be installed or serviced without shutting down the line by means of a 2” full-port isolation valve that comes with a nipple for installation on the pipe tting. In most circumstances, no

Contact Your Supplier

253.872.0284 seametrics.com

special tool is required.

ISO

9001:2008

PROUDLY MADE IN THE

USA

Page 2

IP100/200-SERIES

INSERTION PADDLEWHEEL FLOW SENSOR

Features

IP11x/21x

(Shown with optional externally powered electronics)

Housing Screw

(connect one to ground)

Electronics Module or Cover

Powder-Coated Cast

Aluminum Housing

Cable Gland Strain Relief

Compression Nut for easy

adjustment, secure locking

Adapter mates with threaded tting

FNPT 1 1/2” (2” for PVC) FNPT 2”

3/4” Tubing, low insertion force

(Typically no tool required)

Rotor Housing

Removable Jewel Bearings

Rotor

IP15x/25x

(Shown with optional battery powered electronics)

Cable Gland Strain Relief

Locking Collar O-Ring (EPDM)

2” Adapter (removes to mount hot-tap machine)

Valve Assembly for hot-

tap installation

Hot-tap valve on PVC version

Specications*

Pipe Size 3” to 40”

Power Low Power: 6-36 Vdc/< 2 mA Micropowered (-04 Option): 3.1-16 Vdc/60 μA @ 3.6 Vdc

Sensor Low Power: Digital Magnetoresistive Micropowered (-04 Option): Giant Magnetoresistance (GMR)

Materials Housing Powder-coated cast aluminum

Tubing/Fitting/Sensor Housing Brass, PVC, or 316 Stainless Steel

Rotor PVDF (Kynar®)

Shaft Kynar® /Tungsten Carbide (Kynar® /Ceramic or Kynar®/Silicon Carbide optional)

Bearings Ruby jewel

O-Ring (15x/25x only) EDPM

Valve Assembly for: IP11x/21x (Brass/SS) IP11x/21x (PVC) IP15x/25x (Brass/SS) IP15x/25x (PVC)

None None Bronze (316SS optional) Uses gate valve

Fitting Size Required 1.5” FNPT 2” FNPT 2” FNPT 2” FNPT

Maximum Pressure Brass/SS: 200 psi (14 bar) PVC: 150 psi (10 bar)

Temperature Brass/SS: 200˚ F (93˚ C) PVC: 130˚ F (55˚ C)

Flow Velocity 0.3 to 30 ft/sec (0.9 to 9.14 m/sec)

Accuracy ± 1.5% of full scale

Output Transistor Maximum Current Sinking 150mA (low power version only)

Cable #22 AWG 3-con, 18’ (6m); 2,000’ (610m) maximum cable run Note: 50’ (15m) maximum for battery powered or

Environmental

Regulatory

*Specications subject to change. Please consult our website for the most current data (www.seametrics.com). Kynar is a registered trademark of Arkema, Inc.

micropowered versions.

See meter mounted electronic specication for rating.

Mark

253.872.0284 Page 2 seametrics.com

Page 3

IP100/200-SERIES

IP11x (BRASS/SS) = 11.08” (28.1cm)

IP21x (BRASS/SS) = 16.08” (40.8cm)

4.33”

IP15x (BRASS/SS) = 18.08” (45.9cm)

IP25x (BRASS/SS) = 22.08” (56.1cm)

4.33”

INSERTION PADDLEWHEEL FLOW SENSOR

Dimensions

(11.0cm)

IP11x (PVC) = 13.08” (33.2cm)

IP21x (PVC) = 18.08” (45.9cm)

Hot Tap Installation

Insertion and removal under pressure is possible due to the 2” full-port isolation valve, which comes with a nipple for installation on the pipe tting. If it is necessary to do the initial installation under pressure, any standard hot tap drilling machine with 2” NPT adapter, such as a Transmate or a Mueller, can be used. Ordinarily, it is not necessary to use an installation tool, since the small-diameter tube can be controlled by hand at all but the highest pressures.

(11.0cm)

IP15x (PVC) = 18.08” (45.9cm)

IP25x (PVC) = 24.08” (61.2cm)

Hot Tap Removal

Flow Range

GPM Min (.3ft/sec) 6.6 12 27 47 73 106 188 238 422 660 951 1,174

LPM Min (.09m/sec) 24 45.4 102 178 276 401 712 901 1597 2498 3600 4444

GPM Max (30ft/sec) 660 1200 2700 4700 7370 10600 18800 23800 42200 66000 95100 117400

LPM Max (9.1m/sec) 2498 4542 10220 17791 27898 40125 71166 90093 159744 249837 359993 444407

Approximations based on Schedule 40 pipe.

253.872.0284 Page 3 seametrics.com

3” 4” 6” 8” 10” 12” 16” 18” 24” 30” 36” 40”

Page 4

IP100/200-SERIES

INSERTION PADDLEWHEEL FLOW SENSOR

How to Order

Description Size Material Options (110/210) Options (150/250)

Sensor Only. 3” - 12” = IP110

Sensor Only

Description Size Material Options (112/212) Options (152/252)

Blind 4-20 mA analog

transmitter

(AO55) mounted on the sensor.

on Sensor

A055 Mounted

Description Size Material Options (113/213) Options (153/253)

Rate & total indicator with

pulse, externally powered (FT430)

mounted on the

sensor.

on Sensor

FT430 Mounted

12” - 40” = IP210

Hot Tap 3” - 12” = IP150 12” - 40” = IP250

3” - 12” = IP112 12” - 40” = IP212

Hot Tap 3” - 12” = IP152 12” - 40” = IP252

3” - 12” = IP113 12” - 40” = IP213

Hot Tap 3” - 12” = IP153 12” - 40” = IP253

Brass = B 316 SS = S PVC = P

Brass = B 316 SS= S PVC = P

Rotor with Ceramic Shaft, PVDF, Kynar® = -01 Brass Adapter Fitting 2” NPT = -02 SS Adapter Fitting 2” NPT = -02 Micropower Pickup = -04 Standard Power, LMI 4-pin Connector = -06 Stnd Power, Seametrics Ctrl Connector = -07

Rotor with Ceramic Shaft, PVDF, Kynar® = -01 Brass Adapter Fitting 2” NPT = -02 SS Adapter Fitting 2” NPT = -02 Standard Power, LMI 4-pin Connector = -06 Brass Adapter 1 ½” BSP = -23

Rotor with Ceramic Shaft, PVDF, Kynar® = -01 Brass Adapter Fitting 2” NPT = -02 SS Adapter Fitting 2” NPT = -02 Brass Adapter 1 ½” BSP = -23 SS Adapter 1 ½” BSP = -24 Tamper Evident Kit = -32 Old Style Adapter 1 ½” NPT = -35

Brass Adapter 1 ½” BSP = -23 SS Adapter 1 ½” BSP = -24 Old Style Adapter 1 ½” NPT = -35 *Immersible = -40 Rotor (Kynar®/Silicon Carbide Shaft) = -68 12” Extension (200 Series Only) = -72 Roytronic® Series-A 5-Pin Connector = -106

SS Adapter 1 ½” BSP = -24 Old Style Adapter 1 ½” NPT = -35 Rotor (Kynar®/Silicon Carbide Shaft) = -68 12” Extension (200 Series Only) = -72 Roytronic® Series-A 5-Pin Connector = -106

Non-resettable Total = -64 Rotor (Kynar®/Silicon Carbide Shaft) = -68 12” Extension (200 Series Only) = -72 Hinged Display Cover = -126

Rotor with Ceramic Shaft, PVDF, Kynar® = -01 Micropower Pickup = -04 Standard Power, LMI 4-pin Connector = -06 Standard Power, Seametrics Control Connector = -07 316 SS Valve Assembly = -08 No Valve Assembly = -09 *Immersible = -40 Rotor (Kynar®/Silicon Carbide Shaft) = -68 12” Extension (200 Series Only) = -72 Roytronic® Series-A 5-Pin Connector = -106

Rotor with Ceramic Shaft, PVDF, Kynar® = -01 Standard Power, LMI 4-pin Connector = -06 316 SS Valve Assembly = -08 No Valve Assembly = -09 Rotor (Kynar®/Silicon Carbide Shaft) = -68 12” Extension (200 Series Only) = -72 Roytronic® Series-A 5-Pin Connector = -106

Rotor with Ceramic Shaft, PVDF, Kynar® = -01 316 SS Valve Assembly = -08 No Valve Assembly = -09 Tamper Evident Kit = -32 Old Style Adapter = -35 Non-resettable Total = -64 Rotor (Kynar®/Silicon Carbide Shaft) = -68 12” Extension (200 Series Only) = -72 Hinged Display Cover = -126

Description Size Material Options (116/216) Options (156/256)

Data logger (DL76) mounted on the sensor.

on Sensor

3” - 12” = IP116 12” - 40” = IP216

Hot Tap 3” - 12” = IP156 12” - 40” = IP256

Brass = B 316 SS = S PVC = P

Rotor with Ceramic Shaft, PVDF, Kynar® = -01 Brass Adapter Fitting 2” NPT = -02 SS Adapter Fitting 2” NPT = -02 Brass Adapter 1 ½” BSP = -23 SS Adapter 1 ½” BSP = -24

Tamper Evident Kit = -32 Old Style Adapter 1 ½” NPT = -35 Rotor (Kynar®/Silicon Carbide Shaft) = -68 12” Extension (200 Series Only) = -72

Rotor with Ceramic Shaft, PVDF, Kynar® = -01 316 SS Valve Assembly = -08 No Valve Assembly = -09 Tamper Evident Kit = -32 Rotor (Kynar®/Silicon Carbide Shaft) = -68 12” Extension (200 Series Only) = -72

DL76 Mounted

Description Size Material Options (117/217) Options (157/257)

Rate & total indicator with

pulse, battery powered (FT450)

mounted on the

sensor.

on Sensor

FT450 Mounted

Description Size Material Options (119/219) Options (159/259)

Rate & total indicator with

pulse & 4-20 mA output, loop powered (FT440)

mounted on the

sensor.

on Sensor

FT440 Mounted

* Immersible to maximum of 3 ft (1m), up to 2 weeks • Kynar is a registered trademark of Arkema, Inc. Roytronic is a registered trademark of Milton Roy Company.

3” - 12” = IP117 12” - 40” = IP217

Hot Tap 3” - 12” = IP157 12” - 40” = IP257

3” - 12” = IP119 12” - 40” = IP219

Hot Tap 3” - 12” = IP159 12” - 40” = IP259

Brass = B 316 SS= S PVC = P

Non-resettable Total = -64 Rotor (Kynar®/Silicon Carbide Shaft) = -68 12” Extension (200 Series Only) = -72 Hinged Display Cover = -126

Seametrics • 19026 72nd Avenue South • Kent, Washington 98032 • USA

(P) 253.872.0284 • (F) 253.872.0285 • 1.800.975.8153 • seametrics.com

LT-65650025r4.5 20170503

5/3/2017

Seametrics IP110, IP210 Specifications

Specifications and Main Features

Frequently Asked Questions

User Manual