Seagate MEDALIST 7630, MEDALIST 5120, MEDALIST 10240, MEDALIST 2510 Product manual
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Medalist 10240, Medalist 7630
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Medalist 5120, Medalist 2510
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ultra ATA Interface Drives
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Product Manual
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Medalist 10240, Medalist 7630
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Medalist 5120, Medalist 2510
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ultra ATA Interface Drives
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Product Manual
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1998, 1999 Seagate Technology, Inc. All rights reserved
Publication Number: 20400096-001, Rev. B, January 1999
Seagate, Seagate Technology, the Seagate logo, Medalist and the
Medalist logo are registered trademarks of Seagate Technology, Inc.
Other product names are registered trademarks or trademarks of their
owners.
Seagate reserves the right to change, without notice, product offerings
or specifications. No part of this publication may be reproduced in any
form without written permission fro m Seagate Technology, Inc.
Medalist 10240, 7630, 5120, 2510 Product Manual, Rev. B v
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Specification summary table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1.0 Drive specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.1 Formatted capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.1.1 Default logical geometry . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.1.2 Supported CHS translation geometries . . . . . . . . . . . . . 6
1.2 Physical organization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1.3 Recording and interface technology . . . . . . . . . . . . . . . . . . . . 6
1.4 Physical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1.5 Seek time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1.6 Start/stop times . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
1.7 Power specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
1.7.1 Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
1.7.2 Conducted noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
1.7.3 Voltage tolerance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
1.7.4 Power-management modes . . . . . . . . . . . . . . . . . . . . . 10
1.8 Environmental tolerances . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
1.8.1 Ambient temperature . . . . . . . . . . . . . . . . . . . . . . . . . . 11
1.8.2 Temperature gradient . . . . . . . . . . . . . . . . . . . . . . . . . . 11
1.8.3 Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
1.8.4 Altitude . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
1.8.5 Shock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
1.8.6 Vibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
1.9 Drive acoustics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
1.10 Electromagnetic susceptibility . . . . . . . . . . . . . . . . . . . . . . . 13
1.11 Reliability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
1.12 Agency certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
1.12.1 Safety certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
vi Medalist 10240, 7630, 5120, 2510 Product Manual, Rev. B
1.12.2 Electromagnetic Compatibility . . . . . . . . . . . . . . . . . . . 14
1.12.3 FCC verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2.0 Drive mounting and configuration . . . . . . . . . . . . . . . . . . . . 17
2.1 Handling and static-discharge precautions . . . . . . . . . . . . . . 17
2.2 Jumper settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2.2.1 Master/slave configuration . . . . . . . . . . . . . . . . . . . . . . 17
2.2.2 Alternate capacity jumper . . . . . . . . . . . . . . . . . . . . . . . 17
2.3 Drive mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
3.0 ATA interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
3.1 ATA interface signals and connector pins . . . . . . . . . . . . . . 21
3.2 ATA Interface commands . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
3.2.1 Supported ATA commands . . . . . . . . . . . . . . . . . . . . . . 23
3.2.2 Identify Drive command . . . . . . . . . . . . . . . . . . . . . . . . 25
3.2.3 Set Features command . . . . . . . . . . . . . . . . . . . . . . . . . 29
3.2.4 S.M.A.R.T. commands . . . . . . . . . . . . . . . . . . . . . . . . . 30
Medalist 10240, 7630, 5120, 2510 Product Manual, Rev. B vii
Figures
Figure 1. Typical startup and operation current profile . . . . . . . . . . . . 9
Figure 2. Alternate capacity jumper and master/slave jumper . . . . . 18
Figure 3. Mounting dimensions—top, side and end view . . . . . . . . . 19
Figure 4. I/O pins and supported ATA signals. . . . . . . . . . . . . . . . . . 22
viii Medalist 10240, 7630, 5120, 2510 Product Manual, Rev. B
Medalist 10240, 7630, 5120, 2510 Product Manual, Rev. B 1
Introduction
This manual describes the functional, mechanical and interface specifications for the Medalist
(ST37630A), Medalist 5120 (ST35120A) and the Medalist 2510
(ST32510A). These drives are referred to throughout this manual by their
model numbers. These drives provide the following key features:
Low power consumption
•
Quiet operation
•
Support for S.M.A.R.T. drive monitoring and reporting
•
High instantaneous (burst) data-transfer rates (up to 33.3 Mbytes per
•
second) using Ultra DMA mode 2
Full-track multiple-sector transfer capability without local processor
•
intervention
128-Kbyte cache
•
State-of-the-art cache and on-the-fly error-correction algorithms
•
Support for Read Multiple and Write Multiple commands
•
Support for autodetection of master/slave drives that use cable select
•
(CSEL)
These drives use MR recordi ng heads and PRML technology , which
•
provide the drives with increased areal density.
10240 (ST310240A), Medalist 7630
2 Medalist 10240, 7630, 5120, 2510 Product Manual, Rev. B
Specification summary table
The specifications listed in this table are for quick reference. For details
on specification measurement or definition, see the appropriate section
of this manual.
Drive Specification ST310240A ST37630A ST35120A ST32510A
Guaranteed Mbytes
6
(×10
bytes)
Guaranteed sectors 20,005,650 15,004,710 10,002,825 4,995,648
Bytes per sector 512
Default sectors per track 63
Default read/write heads 16 15 15 16
Default cylinders 16,383 15,878 10,585 4,956
Physical read /write
heads 8642
Discs 4321
Recording density
(bits/inch max) 181,000
Track density
(tracks/inch) 10,300
Areal density
(Mbits/inch
Spindle speed (RPM) 5,400
Internal data-transfer
rate (Mbits/sec max)
2
)1,850
10,242 7,682 5,121 2,557
148
I/O data-transfer rate
(Mbytes/se c ma x)
ATA data-transfer modes
supported
Cache buffer (Kbytes) 128
Height (mm max) 26.10
Width (mm max) 101.85
Length (mm max) 147.00
Weight (grams typical) 544
PIO modes 0, 1, 2, 3, 4;
Multiword DMA modes 0, 1, 2;
Ultra DMA modes 0, 1, 2
33.3
Medalist 10240, 7630, 5120, 2510 Product Manual, Rev. B 3
Drive Specification ST310240A ST37630A ST35120A ST32510A
Track-to-track seek time
(msec typical) 1.5 (read), 3.0 (write)
Average seek time
(msec typical) 10.5 (read), 12.5 (write)
Full-stroke seek time
(msec typical) 19.0 (read), 21.0 (write)
Average latency (msec) 5.6
Power-on to ready
(sec typical) 10
Standby to ready
(sec typical) 10
Startup current:
12V (peak)
5V (RMS)
1.8 amps
0.6 amps
Seek power and cu rrent
(mean)
Read/Write power and
current (typical) 5.2 watts
Idle mode power and
current (typical) 4.2 watts
Standby mode power
and current (typical) 0.9 watts
Sleep mode power and
current (typical) 0.9 watts
Voltage tolerance
(including noise)
Ambient temperature
(°C) 5 to 55 (op.), –40 to 70 (nonop.)
Temperature gradient
(°C per hour max) 20
Relative humidity
(op. and nonop.)
Relative humidity
gradient 10% per hour max
Wet bulb temperature
(°C max) 29.4 (op.), 29.4 (nonop.)
8% to 90% (op.)
5% to 95% (nonop.)
7.4 watts
5V ± 5%
12V ± 8%
4 Medalist 10240, 7630, 5120, 2510 Product Manual, Rev. B
Drive Specification ST310240A ST37630A ST35120A ST32510A
Altitude (meters below
mean sea level, max)
–122 to 3,048 (op.)
–122 to 12,192 (nonop.)
Shock, operating
(Gs max at 11 mse c) 15
Shock, nonoperating
(Gs max at 11 mse c)
(Gs max at 2 msec)
75
200
Vibration, operating 0.50 G (0 to peak, 22–350 Hz)
Vibration, nonoperating 5.0 Gs (0 to peak, 22–350 Hz)
Drive acoustics
(bels—sound power)
3.5 (typical), 3.9 (max)
Idle mode
(dBA—sound pressure)
Drive acoustics
(bels—sound power)
30 (typical )
4.0 (typical), 4.3 (max)
Read/Write mode
(dBA—sound pressure)
Nonrecoverable read
errors 1 per 10
32 (typical )
14
bits read
Mean time between
failures (pow e r-on
400,000
hours)
Contact start-stop cycles
(25°C, 40% relative
40,000
humidity)
Service life (years) 5
Loading...