Seagate MEDALIST 4342, MEDALIST 2122, MEDALIST 3232, MEDALIST 1722, MEDALIST 1012 Product Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . .

Medalist 4342, Medalist 3232

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . .

Medalist 2122, Medalist 1722

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . .

Medalist 1012

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . .

Ultra ATA Interface Drives

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . .

Product Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . .

Medalist 4342, Medalist 3232

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . .

Medalist 2122, Medalist 1722

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . .

Medalist 1012

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Ultra ATA Interface Drives

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . .

Product Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . .

ii Medalist 4342, 3232, 2122, 1722 and 1012 Product Manual

Medalist logo are registered t rademarks of Seagate Technology, Inc. Other product names are registered trademark s or trademarks of their owners.

Seagate reserves the right t o change, without notice, produc t offerings or specifications. No part of this publication may be reproduced in any form without written permission from Seagate Technology, Inc.

Medalist 4342, 3232, 2122, 1722 and 1012 Product Manual iii

Contents

Introdu c tion . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Specification summary table . . . . . . . . . . . . . . . . . . . 2

1.0 Drive specifications . . . . . . . . . . . . . . . . . . . . . . 5

1.1 Formatted capacity . . . . . . . . . . . . . . . . . . . . . 5

1.1.1 Default logical geometry . . . . . . . . . . . . . . . . 5

1.1.2 Supported CHS translation geometries . . . . . . . . 6

1.2 Physical organization . . . . . . . . . . . . . . . . . . . . 6

1.3 Recording and interface technology . . . . . . . . . . . . . 6

1.4 Physical characteristics . . . . . . . . . . . . . . . . . . . 7

1.5 Seek time . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1.6 Start/stop times . . . . . . . . . . . . . . . . . . . . . . . 8

1.7 Power Specifications . . . . . . . . . . . . . . . . . . . . 8

1.7.1 Power consumption . . . . . . . . . . . . . . . . . . 8

1.7.2 Conducted noise . . . . . . . . . . . . . . . . . . . . 11

1.7.3 Voltage tolerance . . . . . . . . . . . . . . . . . . . . 11

1.7.4 Power-management modes . . . . . . . . . . . . . . 11

1.8 Environ mental tolerances . . . . . . . . . . . . . . . . . . 12

1.8.1 Ambient temperature . . . . . . . . . . . . . . . . . . 12

1.8.2 Temperature gradient . . . . . . . . . . . . . . . . . 12

1.8.3 Humidity . . . . . . . . . . . . . . . . . . . . . . . . 12

1.8.4 Altitude . . . . . . . . . . . . . . . . . . . . . . . . . 13

1.8.5 Shock . . . . . . . . . . . . . . . . . . . . . . . . . . 13

1.8.6 Vibration . . . . . . . . . . . . . . . . . . . . . . . . 13

1.9 Drive acoustics . . . . . . . . . . . . . . . . . . . . . . . 14

1.10 Electromagnetic susceptibility . . . . . . . . . . . . . . . 14

1.11 Reliability . . . . . . . . . . . . . . . . . . . . . . . . . . 14

1.12 Agency certification . . . . . . . . . . . . . . . . . . . . 15

1.12.1 Safety certification . . . . . . . . . . . . . . . . . . 15

iv Medalist 4342, 3232, 2122, 1722 and 1012 Product Manual

1.12.2 Electromagnetic Compatibility . . . . . . . . . . . . 15

1.12.3 FCC verification . . . . . . . . . . . . . . . . . . . . 15

2.0 Drive mounting and configuration . . . . . . . . . . . . . . 17

2.1 Handling and static-discharge precautions . . . . . . . . . 17

2.2 Jumper settings . . . . . . . . . . . . . . . . . . . . . . . 17

2.2.1 Master/slave configuration . . . . . . . . . . . . . . . 17

2.2.2 Alternate capacity jumper . . . . . . . . . . . . . . . 17

2.3 Drive mounting . . . . . . . . . . . . . . . . . . . . . . . 18

3.0 ATA interface . . . . . . . . . . . . . . . . . . . . . . . . . 21

3.1 ATA interface signals and connector pins . . . . . . . . . . 21

3.1.1 AT bus signal levels . . . . . . . . . . . . . . . . . . . 21

3.2 ATA Interface commands . . . . . . . . . . . . . . . . . . 23

3.2.1 Supported ATA commands . . . . . . . . . . . . . . . 23

3.2.2 Identify Drive command . . . . . . . . . . . . . . . . 25

3.2.3 Set Features comman d . . . . . . . . . . . . . . . . 29

3.2.4 S.M.A.R.T. commands . . . . . . . . . . . . . . . . . 30

Medalist 4342, 3232, 2122, 1722 and 1012 Product Manual v

Figures

Figure 1. Typical startup and operation current profile for the

ST34342A and ST33232A . . . . . . . . . . . . . . . . 10

Figure 2. Typical startup and operation current profile for the

ST32122A, ST31722A and ST31012A . . . . . . . . . . 10

Figure 3. Alternate capacity jumper and master/slave jumpers . . . 18

Figure 4. Mounting dimensions—top, side and end view . . . . . . 19

Figure 5. I/O pins and supported ATA signals . . . . . . . . . . . 22

vi Medalist 4342, 3232, 2122, 1722 and 1012 Product Manual

Medalist 4342, 3232, 2122, 1722 and 1012 Product Manual 1

Introduction

The Medalist 2122 (ST32122A), Medalist 1722 (ST31722A) and Medalist 1012 (ST31012A) provide the following key features:

• Low power consumption

• Quiet operation

• S uppor t for S.M.A.R.T. drive monitoring and reporting

• High instantaneous (burst) data-transfer rates (up to 33.3 Mbytes per

second) using Ultra DMA mode 2

• Ful l-track multiple-sector transfer capability without local processor

intervention

• 128-Kbyte cache

• Stat e- of-the-ar t cachi ng and on-the-fly error-correction algorithms

• S uppor t for Read Multiple and Write Multiple commands

• Support for autodetection of master/slave drives that use cable select

(CSEL)



4342 (ST34342A), Medalist 3232 (ST33232A), Medalist

2 Medalist 4342, 3232, 2122, 1722 and 1012 Product Manual

Specification summary table

The specifications listed in this table are for quick reference. For details on specification measurement or definit ion, see the appropriate section of this manual.

Drive Specification

Guaranteed Mbytes

bytes)

(×10 Guaranteed sectors Bytes per sector 512 Default sectors per

track 63 Default read/write

heads 15 16 16 16 16 Default cylinders 8,894 6,253 4,092 3,303 2,098 Physical read/write

heads 8 6 4 4 2 Discs 4 3 2 2 1 Recording densit y

(bits/inch max) 1 15,100 Track density

(tracks/inch) 5,950 Areal density

(Mbits/inch Spindle speed (RPM) 4,500 Inte rn al data-tran sfer

rate (Mbits/sec max) 87.8 I/O data-transf er ra te

(Mbytes/sec max) 33.3 ATA data-transfer

modes supporte d

Cac he buff er (Kbytes) 128

Height (mm max) 26.2 Width (mm max) 102.4 Length (mm max) 146.8

)685

ST34342A ST33232A ST32122A ST31722A ST31012A

4,303 3,227 2,111 1,704 1,082

8,404,830 6,303,024 4,124,736 3,329,424 2,114,784

PIO modes 0, 1, 2, 3, 4;

Multiword DMA modes 0, 1, 2

Ultra DMA modes 0, 1, 2

Medalist 4342, 3232, 2122, 1722 and 1012 Product Manual 3

Drive Specification

ST34342A ST33232A ST32122A ST31722A ST31012A

Weight (grams typical) 540 510 500

Track-to-track seek time (msec typical) 2 (seek), 2.5 (read), 3. 5 (wr ite )

Average seek tim e (msec typical) 12 (seek), 12.5 (read ), 14.5 (wr i te)

Full-stroke se ek t ime (msec typical) 21.5 (seek), 22.0 (read), 23.0 (write)

Average latency (msec) 6.67

Power-on to ready (sec typical) 14

Standby to ready (sec typical) 10

Startup current: 12V (peak) 5V (RMS)

1.8 amps

0.675 amps

1.5 am ps

0.6 am ps

Seek power (typic al) 6 .8 watts 5.6 watts

Operating power (typical) 5.2 watts 4.2 watts

Idle mode power (typical) 4.8 watts 3.8 watts

Standby mode power (typical) 1.0 watts

Sleep mode power (typical) 0.7 watts

Volt age t oler ance (including noise)

5% +5V

10% +12V

Ambient t emperature (°C) 5 to 55 (op.), –40 to 60 ( nonop.)

Temperat ure gradient (°C per

hour max) Relative humidity

(op. and nonop.) 8% to 80%

continued

4 Medalist 4342, 3232, 2122, 1722 and 1012 Product Manual

continued from pr evious page

Drive Specification

ST34342A ST33232A ST32122A ST31722A ST31012A

Relative humidity gradient 10% per hour max

Wet bulb temper ature (°C max) 28.9 (op.), 28.9 (nonop.)

Altitude (meters above mean sea level, max)

–61 to 3,048 (op.)

–61 to 12,192 (non op. )

Shock, operating (Gs max at 11 msec) 5

Shock, nonoperati ng (Gs max at 11 msec) 75

Vibration, oper ati ng 0.50 G (0 to peak, 5–350 H z) Vibration,

nonoperating 5.0 Gs (0 to peak, 5–3 50 H z) Drive acoustics

(bels—sound po w er) Idle mode (dBA—

3.7 (typical), 4.1 ( ma x) 34 (typical)

sound pressure) Drive acoustics

(bels—sound po w er)

4.3 (typical), 4.6 ( ma x)

Read/Writ e mo de Nonrecoverable

read errors 1 per 10

bits read

Mean time between failures

300,000

(power-on hours) Contact start-st op

cycles

40,000 (25°C, 40% relative humidity)

Service life (years) 5

+ 28 hidden pages