Seagate MEDALIST 3230, MEDALIST 2120, MEDALIST 1721, MEDALIST 1010, MEDALIST 4340 Product Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . .
Medalist 4340, Medalist 3230
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . .
Medalist 2120, Medalist 1721
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . .
Medalist 1010
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . .
ATA Interface Drives
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . .
Product Manual
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . .
Medalist 4340, Medalist 3230
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . .
Medalist 2120, Medalist 1721
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . .
Medalist 1010
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ATA Interface Drives
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . .
Product Manual
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . .
Medalist logo are registered t rademarks of Seagate Technology, Inc. Other product names are registered trademark s or trademarks of their owners.
Seagate reserves the right t o change, without notice, produc t offerings or specifications. No part of this publication may be reproduced in any form without written permission from Seagate Technology, Inc.
Medalist 4340, 3230, 2120, 1721 and 1010, Rev. A iii
Contents
Introdu c tion . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Specification summary table . . . . . . . . . . . . . . . . . . . 2
1.0 Drive specifications . . . . . . . . . . . . . . . . . . . . . . 5
1.1 Formatted capacity . . . . . . . . . . . . . . . . . . . . . 5
1.1.1 Default logical geometry . . . . . . . . . . . . . . . . 5
1.1.2 Supported CHS translation geometries . . . . . . . . 6
1.2 Physical organization . . . . . . . . . . . . . . . . . . . . 6
1.3 Recording and interface technology . . . . . . . . . . . . . 6
1.4 Physical characteristics . . . . . . . . . . . . . . . . . . . 7
1.5 Seek time . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1.6 Start/stop times . . . . . . . . . . . . . . . . . . . . . . . 8
1.7 Power Specifications . . . . . . . . . . . . . . . . . . . . 8
1.7.1 Power consumption . . . . . . . . . . . . . . . . . . 8
1.7.2 Conducted noise . . . . . . . . . . . . . . . . . . . . 11
1.7.3 Voltage tolerance . . . . . . . . . . . . . . . . . . . . 11
1.7.4 Power-management modes . . . . . . . . . . . . . . 11
1.8 Environ mental tolerances . . . . . . . . . . . . . . . . . . 12
1.8.1 Ambient temperature . . . . . . . . . . . . . . . . . . 12
1.8.2 Temperature gradient . . . . . . . . . . . . . . . . . 12
1.8.3 Humidity . . . . . . . . . . . . . . . . . . . . . . . . 12
1.8.4 Altitude . . . . . . . . . . . . . . . . . . . . . . . . . 13
1.8.5 Shock . . . . . . . . . . . . . . . . . . . . . . . . . . 13
1.8.6 Vibration . . . . . . . . . . . . . . . . . . . . . . . . 13
1.9 Drive acoustics . . . . . . . . . . . . . . . . . . . . . . . 14
1.10 Electromagnetic susceptibility . . . . . . . . . . . . . . . 14
1.11 Reliability . . . . . . . . . . . . . . . . . . . . . . . . . . 14
1.12 Agency certification . . . . . . . . . . . . . . . . . . . . 15
1.12.1 Safety certification . . . . . . . . . . . . . . . . . . 15
iv Medalist 4340, 3230, 2120, 1721 and 1010, Rev. A
1.12.2 Electromagnetic Compatibility . . . . . . . . . . . . 15
1.12.3 FCC verification . . . . . . . . . . . . . . . . . . . . 15
2.0 Drive mounting and configuration . . . . . . . . . . . . . . 17
2.1 Handling and static-discharge precautions . . . . . . . . . 17
2.2 Jumper settings . . . . . . . . . . . . . . . . . . . . . . . 17
2.2.1 Master/slave configuration . . . . . . . . . . . . . . . 17
2.2.2 Alternate capacity jumper . . . . . . . . . . . . . . . 17
2.3 Drive mounting . . . . . . . . . . . . . . . . . . . . . . . 18
3.0 ATA interface . . . . . . . . . . . . . . . . . . . . . . . . . 21
3.1 ATA interface signals and connector pins . . . . . . . . . . 21
3.2 ATA Interface commands . . . . . . . . . . . . . . . . . . 23
3.2.1 Supported ATA commands . . . . . . . . . . . . . . . 23
3.2.2 Identify Drive command . . . . . . . . . . . . . . . . 25
3.2.3 Set Features comman d . . . . . . . . . . . . . . . . 29
3.2.4 S.M.A.R.T. commands . . . . . . . . . . . . . . . . . 30
Medalist 4340, 3230, 2120, 1721 and 1010, Rev. A v
Figures
Figure 1. Typical startup and operation current profile for the
ST34340A and ST33230A . . . . . . . . . . . . . . . . 10
Figure 2. Typical startup and operation current profile for the
ST32120A, ST31721A and ST31010A . . . . . . . . . . 10
Figure 3. Alternate capacity jumper and master/slave jumpers . . 18
Figure 4. Mounting dimensions—top, side and end view . . . . . . 19
Figure 5. I/O pins and supported ATA signals . . . . . . . . . . . 22
vi Medalist 4340, 3230, 2120, 1721 and 1010, Rev. A
Medalist 4340, 3230, 2120, 1721 and 1010, Rev. A 1
Introduction
The Medalist 2120 (ST32120A), Medalist 1721 (ST31721A) and Medalist 1010 (ST31010A) provide the following key features:
Low power consumption
Quiet operation
S uppor t for S.M.A.R.T. drive monitoring and reporting
High instantaneous (burst) data-transfer rates (up to 16.7 Mbytes per
second) using PIO mode 4 and DMA mode 2
Full-track multisector transfer capability without local processor inter-
vention
128-Kbyte adaptive multisegmented cache
S tat e- of-the-ar t cachi ng and on-the-fly error-correction algorithms
Support for Read/Write Multiple commands
Support for autodetection of master/slave drives that use cable select
(CSEL)
4340 (ST34340A), Medalist 3230 (ST33230A), Medalist
2 Medalist 4340, 3230, 2120, 1721 and 1010, Rev. A
Specification summary table
The specifications listed in this table are for quick reference. For details on specification measurement or definit ion, see the appropriate section of this manual.
Drive Specification
Guaranteed Mbytes
6
bytes)
(×10 Guaranteed sectors Bytes per sector 512 Default sectors per
track 63 Default read/write
heads 15 16 16 16 16 Default cylinders 8,894 6,253 4,092 3,303 2,098 Physical read/write
heads 8 6 4 4 2 Discs 4 3 2 2 1 Recording densit y
(bits/inch max) 1 15,100 Track density
(tracks/inch) 5,950 Areal density
(Mbits/inch Spindle speed (RPM) 4,500 Inte rn al data-tran sfer
rate (Mbits/sec max) 87.8 I/O data-transf er ra te
(Mbytes/sec max) 16.7 ATA data-transfer
modes supporte d Cac he buff er
(Kbytes) 128 Height (mm max) 26.2 Width (mm max) 102.4 Length (mm max) 146.8
2
)685
ST34340A ST33230A ST32120A ST31721A ST31010A
4,303 3,227 2,111 1,704 1,082
8,404,830 6,303,024 4,124,736 3,329,424 2,114,784
PIO modes 0, 1, 2, 3, 4;
Multiword DMA modes 0, 1, 2
Medalist 4340, 3230, 2120, 1721 and 1010, Rev. A 3
Drive Specification
ST34340A ST33230A ST32120A ST31721A ST31010A
Weight (grams typical) 540 510 500
Track-to-track seek time (msec typical) 2 (seek), 2.5 (read), 3. 5 (wr ite )
Average seek tim e (msec typical) 12 (seek), 12.5 (read ), 14.5 (wr i te)
Full-stroke se ek t ime (msec typical) 21.5 (seek), 22.0 (read), 23.0 (write)
Average latency (msec) 6.67
Power-on to ready (sec typical) 14
Standby to ready (sec typical) 10
Startup current: 12V (peak) 5V (RMS)
1.8 amps
0.675 amps
1.5 am ps
0.6 am ps
Seek power (typic al) 6.8 watts 5.6 watts
Operating power (typical) 5.2 watts 4.2 watts
Idle mode power (typical) 4.8 watts 3.8 watts
Standby mode power (typical) 1.0 watts
Sleep mode power (typical) 0.7 watts
Volt age t oler ance (including noise)
±
5% +5V
±
10% +12V
Ambient t empera­ture (°C) 5 to 55 (op.), –40 to 60 ( nonop.)
Temperat ure gradient (°C per
20
hour max) Relative humidity
(op. and nonop.) 8% to 80% Relative humidity
gradient 10% per hour max
4 Medalist 4340, 3230, 2120, 1721 and 1010, Rev. A
Drive Specification
ST34340A ST33230A ST32120A ST31721A ST31010A
Wet bulb temper a­ture (°C max) 28.9 (op.), 28.9 (nonop.)
Altitude (meters above mean sea level, max)
–61 to 3,048 (op.)
–61 to 12,192 (non op. )
Shock, operating (Gs max at 11 msec) 5
Shock, nonoperati ng (Gs max at 11 msec) 75
Vibration, oper ati ng 0.50 G (0 to peak, 5–350 H z) Vibration, nono per at -
ing 5.0 Gs (0 to peak, 5- 350 Hz) Drive acoustics
(bels—sound po w er) Idle mode (dBA—
3.7 (typical), 4.1 ( ma x) 34 (typical)
sound pressure) Drive acoustics
(bels—sound po w er)
4.3 (typical), 4.6 ( ma x)
Read/Writ e mo de Nonrecoverable
read errors 1 per 10
14
bits read
Mean time between failures
300,000
(power-on hours) Contact start-st op
cycles
40,000 (25°C, 40% relative humidity)
Service life (years) 5
Medalist 4340, 3230, 2120, 1721 and 1010, Rev. A 5
1.0 Drive specifications
Unless otherwise noted, all specific ations are measured under ambient conditions, at 25°C, and nominal power. For conveni ence, the phrases
the drive
ST34340A, ST33230A, ST32120A, ST31721A and the ST31010A.
and
this drive
1.1 Formatted cap acity
are used throughout this manual to indicate the
Drive
Model
ST34340A 4,303 8,404,830 512 ST33230A 3,227 6,303,024 512 ST32120A 2,111 4,124,736 512 ST31721A 1,704 3,329,424 512 ST31010A 1,082 2,114,784 512
DOS systems cannot access more than 528 Mbytes on a drive un-
Note .
less 1) the host system supports and is configured for LBA address­ing or for extended CHS addressing, 2) the host system contains a specialized drive controller, or 3) the host system runs BIOS trans­lation software. Contact your Seagate
Guaranteed Mbytes
(1 Mbyte = 10
6
bytes)
Guaranteed
sectors (n)
®
representative for details.
Bytes per
sector
1.1.1 Default logical geometry
CHS Mode Cylinders Read/Write heads Sectors per track
ST34340A 8,894 15 63 ST33230A 6,253 16 63 ST32120A 4,092 16 63 ST31721A 3,303 16 63 ST31010A 2,098 16 63
LBA Mode
When addressing your drive in LBA mode, all blocks (sectors) are consecutively numbered from 0 to guaranteed sectors as defined in the table above.
n – 1,
where
is the number of
n
Loading...
+ 29 hidden pages