StatClean® - Ultrasonic Cleaner
USER MANUAL
FEATURES:
Large tank capacity Tank capacity 6.0 L / 1.6 gallon.
Tank size: 34.0 x 20.5 x 9.9 cm / 13.4” x 8.1” x 3.9”
Stainless Steel Rack and
Basket
Use rack when using cassettes and basket for loose
instruments.
Control panel with capacitive
sensing technology
Solid panel top. Durable, reliable, resistant to water and harsh
chemicals.
Drainage valve Convenient to use.
Memory feature Recalls last timer settings.
Two industrial grade
ultrasonic transducers
Uniform distribution of ultrasonic waves, strong cleaning, high
durability.
3-color LED display 1 to 30-minute full range timer, degas, and thermometer.
Independent control circuit
for each ultrasonic transducer
40% higher cleaning efficiency, not susceptible to interference,
more durable.
Multiple circuit protectors When overloaded or improperly used, the protectors shut down
the power to certain areas to protect the machine.
Moisture-proofed PCB with
industrial IC
Capable for different working environments with better antiinterference performance.
Two cooling fans One for cooling of PCB boards, one for cooling of ultrasonic
transducers. Improve heat dissipation and beneficial for
continuous operations.
Solid and advanced structural
design
4.5 mm thick wall housing made from engineering grade plastic
with tongue-in-groove design for better waterproof and dropproof performance.
SD-485 NA EN R2. StatClean is a registered trademark and
Your Infection Control Specialist
is a trademark of SciCan Ltd.
Principles of ultrasonic cleaning
The cleaning effect is achieved through high frequency vibrations that produce air bubbles within the liquid,
which when in contact with an object dislodges the debris.
Using tap water is sufficient; however, it is recommended to use filtered water for best results.
Read the Manual First
Before use of device, review the manual. Warnings and operations should be followed carefully.
INTRODUCTION
TABLE OF CONTENTS
Safety Precautions 1
Product Structure & Accessories 3
Control Panel & Operations 4
Operation Guidelines 5
Memory Operations 7
Common Cleaning Methods 8
Product Exploded View 10
Care and Maintenance 12
Specifications 14
Warranty 14
1
SAFETY PRECAUTIONS
Appliance and cleaner are potential life hazards to children, PLEASE KEEP
THEM AWAY AND OUT OF REACH FROM CHILDREN.
To prevent life-threatening electrical shock, please observe the following:
Danger of electrical shock! Do not use while bathing. Never immerse the device or the power cord in
water or any liquids.
› Danger of electrical shock! Never touch/insert/remove the power plug with wet hands.
› Danger of electrical shock! If the unit has fallen into water during operation, do not touch the unit.
Remove the power plug from the socket first.
› Danger of electrical shock! Do not spray any liquids over the device.
› Follow the manual to operate the device and never leave the device operating unattended.
› Do not use components unapproved by the manufacturer.
› Remove power cord by grasping its plug and not its cord.
› Keep power cord away from obstructions (cupboard doors, chairs etc.) and hot surfaces to
prevent cord damage.
› Do not use device if it has received damage to any part of the unit (plug, cord, housing etc.)
› Do not disassemble the device, except by professionals.
› If there is damage to the power plug, cord, housing, or other parts of the device, do not use the
device.
› If the unit is damaged, non-operational or has fallen into water, take it to an authorized dealer for
service.
› Remove the power plug from the socket:
- if malfunction occurs before cleaning the device
- if the device is not going to be used for prolonged period after each use (recommended)
› The installation of an earth leakage circuit breaker with a rated tripping current of no more than
30 mA provides further protection against an electrical shock. The installation should only be
carried out by a trained electrician.
2
To prevent fire hazards, please observe the following:
› Do not set unit on soft surfaces (bed, couch etc.) or block the vents on unit. Keep vents free from
any obstructions.
› Observe the other warnings in the previous section.
› If the power cord is damaged, it must be replaced by the manufacturer or its service agent or a
similarly qualified person in order to avoid a hazard.
Use filtered water for best results.
Other observations:
› Do not operate the unit without filling the tank with water. Running dry will damage the
unit.
› Do not plug in the power cord before adding water to the tank. Do not fill the tank above the Max
line to avoid overspill.
› Do not use solution containing abrasive substances or strong corrosive chemical solution not
recommended by the manufacturer or the supplier.
› Operate unit on a dry and flat surface for operation.
› When the unit encounters to severe electromagnetic interference, it may malfunction, stop
operating or lose control functions. If this happens, unplug the power cord then reinsert it to
restart the device.
IMPORTANT SAFETY INSTRUCTIONS:
When using electric appliances, basic precautions should always be followed, including the
following:
› Only use attachments recommended or sold by the manufacturer.
› Do not use outdoors.
› To disconnect, turn all controls to the off position, then remove plug from outlet. Do not unplug by
pulling on cord. To unplug, grasp the plug, not the cord. Unplug from outlet when not in use and
before servicing or cleaning.
SAFETY PRECAUTIONS
Loading...