SCHURTER FAS Technical data

CONNECTORS

new snap-in mounting

POWER ENTRY MODULE WITH LINE FILTER

TYPE KFA

www.schurter.com

3

POWER ENTRY MODULES WITH LINE FILTER

KKFFAA

without voltage selector without voltage selector with voltage selector

Actual information about approvals can be found on

http://www.schurter.com/approvals

C14

70° C

Plug removal necessary for fuse replacement

DDeessccrriippttiioonn

- Panel mount:
Snap-in or screw-on mounting from front side

- 4 Functions:
Inlet Protection class I, Fuseholder for fuse-links 5 x 20 mm 1- or 2­pole, with or without voltage selector (step switch), Line filter in stan­dard and medical version

- Quick connect terminals

- Alternative: version without line filter

CChhaarraacctteerriissttiiccss

- All single elements are already wired

- Plug removal necessary for fuse-link replacement
The fuse drawer "Fingergrip" can be removed by hand
For added safety "Extra-Safe" fuse drawers are available
Fuse drawer meets requirements of medical standard IEC/EN 60601-1
The fuseholder is accessible from the equipment front

- Qualified for use in equipment according IEC/EN 60950

OOtthheerr vveerrssiioonnss oonn rreeqquueesstt::

- medical version M80

TTeecchhnniiccaall ddaattaa

Ratings IEC 1 - 10 A @ Ta 40 °C / 250 VAC; 50 Hz
Ratings UL/CSA 1 - 10 A @ Ta 40 °C / 125 VAC; 60 Hz
Leakage current

standard < 0.5 mA (250 V / 60 Hz)
medical < 5 µA (250 V / 60 Hz)

Dielectric strength

> 1.7 kVDC between L-N
> 2.7 kVDC between L/N-PE

Test voltage (2 sec)
Allowable operation temp. -25 °C to 85 °C
Climatic category 25/085/21, IEC 60068-1
Degree of protection from front side IP40 acc. to IEC 60529
Protection class Suitable for appliances with protection

class I acc. to IEC 61140
Terminals

Quick connect terminals 6.3 x 0.8 mm

With voltage selector: quick-connect

terminals 4.8 x 0.8 mm
Panel thickness s

Screw-on: max 8 mm

Mounting screw torque max 0.5 Nm

Snap-in: 0.8 mm to 3 mm
Materials: Housing Thermoplastic, black, UL 94V-0

Appliance-inlet /-outlet

C14 acc. to IEC/EN 60320-1,
UL 498, CSA C22.2 no. 42 (for cold
condition) pin-temperature 70 °C, 10 A,
Protection class I

Fuseholder 1- or 2-pole, Shocksave category PC2

acc. to IEC/EN 60127-6,
for fuse-links 5 x 20 mm. See page 7

Rated power acceptance @ Ta
23 °C

5 x 20: 2 W (1-pole)/ 1.6 W (2-pole) per

pole
Power acceptance @ Ta >
23°C

Admissible power acceptance at higher

ambient temperature see derating cur-

ves. Take note of the information on

page 5
Voltage selector optional, step, 3 digits
Line filter Standard and medical version, IEC

60939, IEC 60601-1, UL 1283, UL 544,

EN 133 200, CSA C22.2 no. 8

www.schurter.com

4

POWER ENTRY MODULES WITH LINE FILTER

KKFFAA

DDiimmeennssiioonnss

Screw-on mounting

* with voltage selector

** without voltage selector

Snap-in mounting

29.35

33

R3

± 0.1

R4.1

(5)

(47)

(60)

(31.4)

33 max.

37 max.

(27.4)

37 max.

(28.8)

32.8

+ 0.15

0.00

+ 0.15

0.00

0.8 - 3

s

t

]

TTeecchhnniiccaall ddaattaa ooff ffiilltteerr--ccoommppoonneenntts

RRaatteedd ccuurrrreennt

[[AA]

10 Standard Version 2 x 0.3 68 2.2

10 Medical Version (M5) 2 x 0.3 68 1

Filter-Type Inductances

1 Standard Version 2 x 10 68 2.2

2 Standard Version 2 x 4 68 2.2

4 Standard Version 2 x 1.5 68 2.2

6 Standard Version 2 x 0.8 68 2.2

1 Medical Version (M5) 2 x 10 68 1

2 Medical Version (M5) 2 x 4 68 1

4 Medical Version (M5) 2 x 1.5 68 1

6 Medical Version (M5) 2 x 0.8 68 1

Capacitance

L [mH]

CX [nF]

Capacitance

CY [nF]

R [MΩ]