Power Entry Modules with Line Filter
DD12
www.schurter.com/pg06
IEC Appliance Inlet C14 with Filter, Fuseholder 1- or 2-pole, Line Switch 2-pole
C14
70° C
Description
- Panel Mount:
Screw-on from front side
- 4 Functions:
Appliance Inlet Protection class I, Line Switch 2-pole, Fuseholder for
fuse-links 5 x 20 mm 1- or 2-pole, Line filter in standard and medical
version
- Quick connect terminals 6.3 x 0.8 mm
- Alternative: version without line filter
- Alternative: version for snap-in mounting KMF
DD11
Approvals
- VDE License Number: 40001522
- UL License Number: E72928
Characteristics
- Ultra-compact design. Ideal for low profile designs
Aluminum case provides good shielding
- All single elements are already wired
- Fuse drawer meets requirements of medical standard IEC/EN 60601-1
The fuseholder is accessible from the equipment front
For added safety "Extra-Safe" fuse drawers are available
- Ideal for application with high transient loads
Designed for standard and medical applications
- Qualified for use in equipment according IEC/EN 60950
Other versions on request
- Solder terminals
- Fuse drawer 1-pole, plus spare fuse case
- Fuse drawer 2-pole, with shorting bar
- Other rocker marking
- Line switch, illuminated
- Line switch 1-pole
- Medical version M80
- Class X1- and Y1-capacitors for enhanced withstand voltage
- Protection class II, 70°C
References
General Product Information
Weblinks
Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store,
SCHURTER-Stock-Check, Distributor-Stock-Check
Standard- or Medical-Filter
Technical Data
Ratings IEC 1 - 10 A @ Ta 40 °C / 250 VAC; 50 Hz
Ratings UL/CSA 1 - 8 A @ Ta 40 °C / 250 VAC; 60 Hz
Leakage Current standard < 0.5 mA (250 V / 60 Hz)
medical < 5 µA (250 V / 60 Hz)
Dielectric Strength > 1.7 kVDC between L-N
> 2.7 kVDC between L/N-PE
Test voltage (1 min/50 Hz)
Allowable Operation Temp. -25 °C to 85 °C
Climatic Category 25/085/21 acc. to IEC 60068-1
Degree of Protection from front side IP 40 acc. to IEC 60529
Protection Class Suitable for appliances with protection
class 1 acc. to IEC 61140
Terminal Quick connect terminals 6.3 x 0.8 mm
Panel Thickness s Screw-on mounting: max 8 mm
Mounting screw torque max 0.5 Nm
Material: Housing Thermoplastic, black, UL 94V-0
EMC Products
Appliance-Inlet/-Outlet C14 acc. to IEC/EN 60320-1
Fuseholder 1 or 2 pole, Shocksafe category PC2
Rated Power Acceptance @
Ta 23 °C
Power Acceptance @ Ta >
23°C
Line Switch Rocker switch 2-pole, non-illuminated,
Line Filter Standard and Medical Version, IEC
MTBF > 2'000'000 h acc. to MIL-HB-217 F
UL 498, CSA C22.2 no. 42 (for cold
conditions) pin-temperature 70 °C, 10 A,
Protection Class 1
acc. to IEC 60127-6,
for fuse-links 5 x 20 mm
5 x 20: 2 W (1 pole)/ 1.6 W (2-pole) per
pole
Admissible power acceptance at higher ambient temperature see derating
curves
acc. to IEC 61058-1
Technical details
60939, IEC 60601-1, UL 1283, UL 544,
EN 133 200, CSA C22.2 no. 8
Technical details
1
2
DD12
46.7
31.5
27.7
3.25
10.3
56
66
±0.10
12
90˚
45.39.8
3.4
55
5.9
29.8
56
49.3
±0.15
±0.10
R 4.6
±0.10
3.4
PE
N
15.1 1.3
48.5
L
0 20 40 60 80 100
I = < < I
n
I = 0.7 I
n
I = 1.0 I
n
2.0
1.5
1.0
0.5
0.0
0 20 40 60 80 100
0.2
0.0
I = < < I
n
I = 0.7 I
n
I = 1.0 I
n
1.6
0.6
0.4
0.8
1.2
1.0
1.4
Power Entry Modules with Line Filter
www.schurter.com/pg06
Dimensions
Length 55.4 mm
Screw version
Technical Data of Filter-Components
Rated Current
[A]
1 Standard Version 2 x 10 100 2.2 1
2 Standard Version 2 x 4 100 2.2 1
4 Standard Version 2 x 1.5 100 2.2 1
6 Standard Version 2 x 0.8 100 2.2 1
8 Standard Version 2 x 0.6 100 2.2 1
10 Standard Version 2 x 0.3 100 2.2 1
1 Medical Version (M5) 2 x 10 100 - 1
2 Medical Version (M5) 2 x 4 100 - 1
4 Medical Version (M5) 2 x 1.5 100 - 1
6 Medical Version (M5) 2 x 0.8 100 - 1
8 Medical Version (M5) 2 x 0.6 100 - 1
10 Medical Version (M5) 2 x 0.3 100 - 1
Filter-Type Inductances
L [mH]
Capacitance
CX [nF]
Capacitance
CY [nF]
R [MΩ]
Diagrams
Filter standard
non illuminated
1) Line
2) Load
Derating Curves
1-pole
ceptance in Watt
Admissible power ac-
Ambient air temperature Ta °C
Filter Medical M5
non illuminated
1) Line
2) Load
EMC Products
Power Entry Modules with Line Filter
DD12
www.schurter.com/pg06
Attenuation Loss
Standard version
- - - - differential mode _____ common mode
1 A 2 A 4 A 6 A
8 A 10 A
Medical version (M5)
1 A 2 A 4 A 6 A
8 A 10 A
Variants
Fuse drawer must be ordered separately (see accessories).
Fingergrip and Extra Safe. The same drawer as used by type KEA.
Rated Current
[A]
1 Standard Version 1-pole 2-pole DD12.1111.111
2 Standard Version 1-pole 2-pole DD12.2111.111
4 Standard Version 1-pole 2-pole DD12.4111.111
6 Standard Version 1-pole 2-pole DD12.6111.111
8 Standard Version 1-pole 2-pole DD12.8111.111
10 Standard Version 1-pole 2-pole DD12.9111.111
1 Standard Version 2-pole 2-pole DD12.1121.111
2 Standard Version 2-pole 2-pole DD12.2121.111
4 Standard Version 2-pole 2-pole DD12.4121.111
6 Standard Version 2-pole 2-pole DD12.6121.111
8 Standard Version 2-pole 2-pole DD12.8121.111
10 Standard Version 2-pole 2-pole DD12.9121.111
1 Medical Version (M5) 2-pole 2-pole DD12.1321.111
2 Medical Version (M5) 2-pole 2-pole DD12.2321.111
4 Medical Version (M5) 2-pole 2-pole DD12.4321.111
Filter-Type Fuseholder Line Switch Order Number
Distributor-Stock-Check | SCHURTER-Stock-Check | e-Store
EMC Products
3
4
DD12
Power Entry Modules with Line Filter
www.schurter.com/pg06
Rated Current
[A]
6 Medical Version (M5) 2-pole 2-pole DD12.6321.111
8 Medical Version (M5) 2-pole 2-pole DD12.8321.111
10 Medical Version (M5) 2-pole 2-pole DD12.9321.111
10 A version only approved up to 8 A at UL.
Packaging unit
Filter-Type Fuseholder Line Switch Order Number
20 Pcs
Required Accessory
Description
Fusedrawer 2
Fusedrawer with and without Voltage Selector Insert
Fingergrip, 2-pole 4301.1401
Extra-Safe, 2-pole 4301.1403
Fingergrip, 1-pole 4301.1405
Extra-Safe, 1-pole 4301.1407
Accessories
...
Mating Outlets/Connectors
Assorted Covers
Rear Cover
0859.0076
Cord retaining kits
Cord retaining strain relief
Flat head, A 4700.0001
Category / Description
Appliance Outlet Overview complete
IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal 4787
IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal 4788
IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091
IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal 5092
Appliance Outlet further types to DD12
Connector Overview complete
IEC Connector C15, Rewireable, Straight 0101
IEC Connector C15A, Rewireable, Straight 0102
IEC Connector C15A, Rewireable, Straight 0102-G
IEC Connector C15A, Rewireable, Angled 0112
IEC Connector C13, Rewireable, Angled 4012
Connector further types to DD12 ...
EMC Products
Power Entry Modules with Line Filter
Category / Description
Power Cord Overview complete
Power Cord with IEC Connector C13, Angled 0311
Power Cord with IEC Connector C13, Angled 3011
Power Cord with IEC Connector C13, Angled 3012
Power Cord with IEC Connector C13, Angled 3013
Power Cord with IEC Connector C13 3020
Power Cord further types to DD12 ...
DD12
www.schurter.com/pg06
The specifications, descriptions and illustrations indicated in this document are based on
current information. All content is subject to modifications and amendments.
EMC Products
5
Loading...