SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 6
Page 7
1 ABOUT THE SC2
1.2 Package Contents
SC2SC2 Remote Control
USB-C Power &
Coin Battery
Data Cable
1.3 Optional Accessories
SC2 HD Boom
Microphone
Foam cover for SC2 HD
Boom Microphone (2)
Contact SCHUBERTH or your authorized dealer for accessories.
Part NumberSpare Part
SC2 HD Boom Microphone with foam cover
9049100370
Foam cover for SC2 HD Boom Microphone
9049100372
Remote Control for SC2
9049100374
9049100375
USB-C Power & Data Cable
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 7
Page 8
2. INSTALLING THE HEADSET ON
YOUR HELMET
2.1 Installing the SC2 Remote Control
1. Remove the cover for the SC2 Remote Control from your helmet.
Cover for the SC2 Remote Control
2. Slide and insert the SC2 Remote Control onto your helmet.
2.2 Installing the SC2
1. Remove the SC2 cover from the helmet by lifting it up with the SC2
Remote Control cover.
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 8
Page 9
2 INSTALLING THE HEADSET ON YOUR HELMET
2. Pull out the antenna cable retainer from its original position, and pull out the
antenna cables from the upper gap in the space. Then, connect the SC2’s
antenna cables and the helmet’s antenna cables correctly.
Antenna
cable
retainer
Click
3. Put the antenna cable retainer back into its original position, and put the
connected cables into the upper gap in the space.
Note: Make sure that the antenna cable retainer and the connected cables
are positioned correctly before installing the SC2. If not, the cables may be
damaged or interference may occur.
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 9
Page 10
2 INSTALLING THE HEADSET ON YOUR HELMET
4. Install the SC2 into the helmet.
Click
2.3 Removing the SC2
1. Remove the installed SC2 from the helmet by lifting it up with the SC2
Remote Control cover.
2. Pull the antenna cable retainer out from its original position, and pull out the
connected cables from the upper gap in the space. Then, disconnect the
cables correctly.
Note: When you need to un-plug the connectors, please wiggle and pull
them. It will help the connector connection be released more easily.
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 10
Page 11
2 INSTALLING THE HEADSET ON YOUR HELMET
3. Put the antenna cable retainer back into its original position, and put the
helmet’s cables into the upper gap in the space.
2.4 Installing the Microphone
1. Remove the microphone rubber cap as shown in the illustration to install
the microphone.
2. Install the microphone.
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 11
Page 12
3. GETTING STARTED
3.1 Legend
=/
Function
=
Button(s) to tap the specified amount of number of times or
press and hold for the specified amount of time.
“Hello”
Audible prompt
3.2 Downloadable Software
3.2.1 SCHUBERTH SC2 App
SCHUBERTH SC2 APP
By simply pairing your phone with your headset, you can use the
SCHUBERTH SC2 App for quicker and easier set up and management.
•
App functions: Mesh Intercom, Bluetooth Intercom, Music, Device settings,
Language settings
•
Download
_
Android: Google Play Store > SCHUBERTH SC2
_
iOS: App Store > SCHUBERTH SC2
3.2.2 SCHUBERTH Device Manager
The SCHUBERTH Device Manager allows you to upgrade the firmware and
configure its settings directly from your PC or Apple computer.
Download the SCHUBERTH Device Manager from oem.sena.com/schuberth/.
Click Here to Visit oem.sena.com/schuberth/
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 12
Page 13
3 GETTING STARTED
3.3 Powering On and O
3.3.1 SC2 Powering On and O
To switch on the SC2, hold the Multi-function Button for 2 seconds.
To switch off the SC2, hold the Multi-function Button for 2 seconds until
you hear the double beep.
Powering On/Off
=
“Hello” or “Good bye”
3.3.2 SC2 Remote Control Powering On and O
•
To begin using the SC2 Remote Control, remove the plastic strip from the
battery slot.
Plastic Strip
•
Tap the Center Button.
Powering On
=
•
Press and hold the (+) Button and the Center Button for 3 seconds.
Powering Off
=
Note: The SC2 and the SC2 Remote Control come paired together. They will automatically connect to each other when the SC2 and the SC2
Remote Control are powered on.
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 13
Page 14
3 GETTING STARTED
3.4 Charging the SC2
Charging the Headset
The headset will be fully
charged in about 2.5 hours.
(The charging time may vary
depending on the charging
method.)
Note:
•
Please make sure to take off your SC2-installed helmet while charging.
The headset automatically turns off during charging.
•
Any 3rd party USB charger can be used with the headset if the charger is
approved by either the FCC, CE, or IC.
•
The SC2 is compatible with 5 V/1 A input USB-charged devices only.
3.5 Replacing the Battery
To replace the discharged battery of the SC2 Remote Control, follow the
steps below:
1. Prepare a CR2016 Lithium 3 V coin battery for the SC2 Remote Control.
2. Open the battery slot’s cover.
3. Insert a paper clip into the Battery Release Hole. Then, change the
discharged battery with the new battery.
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 14
Page 15
3 GETTING STARTED
4. Insert the new battery into the battery slot.
CR 2016
5. Close the battery slot’s cover. When closing the cover, insert the cover’s
two battery guides first.
3.6 Checking the Battery Level
When switching on, the LED flashes red to indicate the charge level.
SC2
=
=
=
=
Note: When the SC2’s battery is low while in use, you will hear a voice prompt saying “Low battery”.
SC2 Remote Control
=
=
=
=
3.7 Volume Adjustment
You can raise or lower the volume by tapping the (+) Button or the
(-) Button. Volume is set and maintained independently at different levels for
each audio source (i.e., phone, intercom), even when the headset is rebooted.
Volume Up
=
Volume Down
=
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 15
Page 16
4. PAIRING THE HEADSET WITH
OTHER BLUETOOTH DEVICES
When using the headset with other Bluetooth devices for the first time, they
will need to be “paired”. This enables them to recognize and communicate with
one another whenever they are within range.
The headset can pair with multiple Bluetooth devices such as a mobile phone,
GPS, MP3 player, or Sena SR10 Two-Way Radio Adapter via Mobile Phone Pairing, Second Mobile Phone Pairing, and GPS Pairing. The headset can
also be paired with up to three other SCHUBERTH headsets.
Pairs with up to Three SCHUBERTH Headsets
Also Pairs with:
Mobile
Phone
4.1 Phone Pairing
Phone Pairing
MP3
Player
GPS
Devices
Sena
SR10
1. Press and hold the Center Button for 10 seconds.
=
2. Tap the (+) Button.
Blinking alternatively
=
“
Conguration menu
“ Phone pairing”
”
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 16
Page 17
4 PAIRING THE HEADSET WITH OTHER BLUETOOTH DEVICES
Device B
Pi
Bluetooth
SC2
Device B
Pi
Bluetooth
SC2
3. With your mobile phone in Bluetooth-pairing mode, select SC2 in the list of
devices detected.
If your mobile phone asks for a PIN, enter 0000.
PIN=
4.2 Second Mobile Phone Pairing - Second Mobile
Phone, GPS, and SR10
1. Press and hold the Center Button for 10 seconds.
=
2. Double tap the (+) Button.
Blinking
=
“
Conguration menu
”
“ Second mobile phone
pairing”
3. With your mobile phone in Bluetooth-pairing mode, select SC2 in the list of
devices detected.
If your device asks for a PIN, enter 0000.
PIN=
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 17
Page 18
4 PAIRING THE HEADSET WITH OTHER BLUETOOTH DEVICES
Device B
Pi
Bluetooth
SC2
4.3 Advanced Selective Pairing: Hands-Free or
A2DP Stereo
Phone Pairing allows the headset to establish two Bluetooth profiles: Hands-
Free or A2DP Stereo. Advanced Selective Pairing allows the headset to
separate the profiles to enable connection with two devices.
4.3.1 Phone Selective Pairing - Hands-Free Prole
1. Press and hold the Center Button for 10 seconds.
=
“
Conguration menu
2. Tap the (+) Button three times.
Blinking
=
“Phone selective pairing”
3. Select SC2 in the list of Bluetooth devices detected.
If your mobile phone asks for a PIN, enter 0000.
”
PIN=
4.3.2 Media Selective Pairing - A2DP Prole
1. Press and hold the Center Button for 10 seconds.
=
2. Tap the (+) Button four times.
“
Conguration menu
”
=
Blinking
4x
“Media selective pairing”
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 18
Page 19
4 PAIRING THE HEADSET WITH OTHER BLUETOOTH DEVICES
SC2
SC2
3. Select SC2 in the list of Bluetooth devices detected.
If your mobile phone asks for a PIN, enter 0000.
Bluetooth
Pi
Device B
PIN=
4.4 GPS Pairing
1. Press and hold the Center Button for 10 seconds.
=
2. Tap the (+) Button five times.
Blinking
=
5x
3. Select SC2 in the list of Bluetooth devices detected.
“
Conguration menu
“GPS pairing”
”
If your device asks for a PIN, enter 0000.
Bluetooth
Pi
Device B
PIN=
Note: If you pair your GPS device via GPS Pairing, its instruction will
not interrupt your Mesh Intercom conversations, but overlay with them.
Bluetooth intercom conversations will be interrupted by GPS instructions.
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 19
Page 20
5. MOBILE PHONE USAGE
5.1 Making and Answering Calls
Answer a CallEnd a Call
==
Reject a Call
=
Note: If you have a GPS device connected, you will not hear its voice
navigations during a phone call.
5.2 Siri and Google Assistant
The headset supports the Siri and Google Assistant access directly. You can
activate the Siri or Google Assistant using the voice through the headset’s
microphone, a wake word will be used. This is a word or a group of words such
as “Hey Siri” or “Hey Google”.
Activate the Siri or Google Assistant installed on Your Smartphone
“ Hey Google” or “Hey Siri”
=
or
“[Beep, Beep]”
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 20
Page 21
5 MOBILE PHONE USAGE
5.3 Speed Dialing
5.3.1 Assigning Speed Dial Presets
Speed Dial Presets could be assigned through the SCHUBERTH SC2 App or the SCHUBERTH Device Manager.
5.3.2 Using Speed Dial Presets
1. Press and hold the (+) Button for 3 seconds.
Enter Speed Dial Mode
=
2. Tap the (+) Button or the (-) Button to navigate between the menus.
Navigate Forward or Backward through Speed Dial Preset Numbers
=
(1) Last number redial
(2) Speed dial 1
(3) Speed dial 2
or
(4) Speed dial 3
(5) Cancel
=
“ Speed dial”
3. To call one of your Speed Dial Presets, tap the Center Button.
Call a Speed Dial Preset Number
=
4. To redial the last phone call number, tap the Center Button.
Redial Last Number
=
“ Speed dial (#)”
“Last number redial”
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 21
Page 22
6. STEREO MUSIC
6.1 Bluetooth Stereo Music
Play/Pause Music
=
Next TrackPrevious Track
==
“[Beep, Beep]”
6.2 Music Sharing
You can start sharing music with one intercom friend using Bluetooth stereo
music during a two-way intercom conversation and one participant of a Mesh.
If you start sharing music while Bluetooth intercom and Mesh Intercom are
running at the same time, then music shared during Bluetooth intercom will
take priority over music shared during Mesh Intercom.
Note:
•
Both you and your intercom friend can remotely control music playback
such as track forward and track back.
•
Music sharing will be paused when you are using your mobile phone or
listening to GPS instructions.
•
Music sharing will be terminated if the headset starts a multi-way
intercom conference.
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 22
Page 23
6 STEREO MUSIC
6.2.1 Bluetooth Intercom Music Sharing
You can start sharing music with one intercom friend of a two-way intercom
conversation.
Press and hold the (-) Button for 3 seconds.
Start/Terminate Sharing Music
=
“Music sharing o”
6.2.2 Mesh Intercom Music Sharing
You (Creator) can start sharing music with one participant of a Mesh
Intercom.
1. To send a request message to participants connected during Mesh
Intercom, press and hold the (-) Button for 3 seconds.
[You (Creator)]
[You (Creator)]
“Music sharing on”
“Music sharing on”,
=
[Participants]
“ Would you like to accept
music sharing?”
2. You (Creator) can share music with the first participant that accepts the
request by tapping the Mesh Intercom Button.
[Participant] Accept[Participant] Refuse
=
=
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 23
Page 24
7. MESH INTERCOM
7.1 What is Mesh Intercom?
Mesh Intercom™ is a dynamic communication system that provides
instant and effortless bike-to-bike communication without a pre-grouping
process. Mesh Intercom allows riders to connect and communicate with
nearby users without the need to pair each headset together.
Within the same channel in Open Mesh™ or the same private group in Group Mesh™, six users can talk at the same time and enjoy the optimal quality for
their conversation.
Mesh Intercom
A
B
C
E
F
D
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 24
Page 25
7 MESH INTERCOM
7.1.1 Open Mesh
Open Mesh is an open group intercom function. Users can freely
communicate with each other in the same Open Mesh channel and select
which channel (1-9) to use through the headset.
It can connect with a virtually unlimited number of users in each channel.
C
E
A
F
B
B
ACEACAC
DBBD
D
Channel 1Channel 2Channel 9
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 25
Page 26
7 MESH INTERCOM
7.1. 2 Group Mesh
Group Mesh is a closed group intercom function that allows users to join,
leave, or rejoin a group intercom conversation without pairing each headset.
Users can freely communicate with each other in the same private group in
Group Mesh.
For closed intercom conversations using Mesh Intercom, a Group Mesh
needs to be created by the users. When users create a private group in Group
Mesh by Mesh Grouping, the headset automatically switches from Open
Mesh to Group Mesh. Up to 24 users can all be connected in each private
group.
Group Mesh
B
A
CE
DF
7. 2 Starting Mesh Intercom
When Mesh Intercom is enabled, the SC2 will automatically connect to
nearby all other Mesh users and allow them to talk to each other by tapping
the Mesh Intercom Button.
Mesh Intercom On
Blinking
=
“ Mesh intercom on,
Open Mesh, Channel 1”
Mesh Intercom Off
=
“Mesh intercom o”
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 26
Page 27
7 MESH INTERCOM
7.3 Using the Mesh in Open Mesh
When Mesh Intercom is enabled, the headset will be in Open Mesh (default:
channel 1) initially.
7.3.1 Channel Setting (Default: Channel 1)
If the Open Mesh communication experiences interference because other
groups are also using channel 1 (default), change the channel. You can select
from channels 1 to 9.
1. Double tap the Mesh Intercom Button.
=
2. Tap the (+) Button or the (-) Button to navigate between channels.
(1
2 8 9 Exit 1 )
=
or
=
“Channel setting, 1”
“#”
3. Tap the Center Button to save the channel.
=
Note:
•
Channel Setting always starts with channel 1.
•
If you do not press any button for approximately 10 seconds in a specific
channel, the channel is automatically saved.
•
The channel will be remembered even if you turn off the headset.
•
You can use the SCHUBERTH SC2 App to change the channel.
“ Channel is set,
Channel #”
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 27
Page 28
7 MESH INTERCOM
7.4 Using Mesh in Group Mesh
7.4.1 Creating a Group Mesh
Creating a Group Mesh requires two or more Open Mesh users.
Open Mesh
BD
AC
1. To enter Mesh Grouping to create a Group Mesh, press and hold the
Mesh Intercom Button for 5 seconds on the headset of
friend (D)
C
&
D
=
.
“Mesh Grouping”
You (C) and your
2. The headsets complete Mesh Grouping and automatically switch from
Open Mesh to Group Mesh.
“Group Mesh”
Group MeshOpen Mesh
B
A
D
C
Note:
•
If the Mesh Grouping is not completed within 30 seconds, users will hear
a voice prompt, “Grouping failed”.
•
If you want to cancel during the Mesh Grouping, tap the Mesh Intercom
Button.
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 28
Page 29
7 MESH INTERCOM
7.4. 2 Joining an Existing Group Mesh
One of the members in an Existing Group Mesh can allow new members in
Open Mesh to join the Existing Group Mesh.
Existing Group Mesh and
New Members
Current Members
D
A
C
E
FB
1. To enter Mesh Grouping to join the Existing Group Mesh, press and hold
the Mesh Intercom Button for 5 seconds on the headset of One of the current members (E) and a new member(you [C]).
C
E
=
“Mesh Grouping”
&
2. The headsets complete Mesh Grouping. The new members will hear a
voice prompt as their headsets automatically switch from Open Mesh to
Group Mesh.
“Group Mesh”
DF
CE
Note: If the Mesh Grouping is not completed within 30 seconds, the
current members will hear a low tone double beep and the new member will
hear a voice prompt, “Grouping failed”.
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 29
Page 30
7 MESH INTERCOM
7.5 Enable/Disable Mic (Default: Enable)
Users can enable/disable the microphone when communicating in a Mesh
Intercom.
=
“Mic on” or “Mic o”
7.6 Toggling Open Mesh/Group Mesh
Users are able to toggle between Open Mesh and Group Mesh without
resetting the Mesh. This allows users to keep the Group Mesh Network
connection information while in Open Mesh.
Users can toggle to Group Mesh to communicate with participants from the
stored Group Mesh Network connection information.
Toggle Between Open Mesh and Group Mesh
“Open Mesh channel #”
Open Mesh
=
“Group Mesh”
Group Mesh
Note: If you have never participated in Group Mesh, you cannot toggle between Open Mesh and Group Mesh. You will hear a voice prompt, “No
Group Available”.
7.7 Reset Mesh
If a headset in an Open Mesh or Group Mesh resets the Mesh, it will
automatically return to Open Mesh (default: channel 1).
=
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 30
“Reset mesh”
Page 31
8. BLUETOOTH INTERCOM
Up to three people can communicate via intercom with the headset simply by
pairing their headsets.
Pairing with Intercom Friends
A
BC
D
8.1 Intercom Pairing
There are two ways to pair the headset.
8.1.1 Using the Smart Intercom Pairing (SIP)
SIP allows you to quickly pair with your friends for intercom communication by
scanning the QR code on the SCHUBERTH SC2 App without remembering
the button operation.
1. Pair the mobile phone with the headset.
2. Open the
Menu
3. Scan the QR code displayed on your friend (B)’s mobile phone.
•
Your friend (B) can display the QR code on the mobile phone by tapping
> QR code () on the SCHUBERTH SC2 App.
SCHUBERTH SC2 App and tap
).
(Smart Intercom Pairing
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 31
Page 32
8 BLUETOOTH INTERCOM
4. Tap Save and check that your friend (B) is paired with you (A) correctly.
5. Tap
Scan () and repeat steps 3-4 to pair with Intercom Friends (C) and
(D).
Note: The Smart Intercom Pairing (SIP) is not compatible with Sena products that use Bluetooth 3.0 or below.
8.1.2 Using the Button
1. Press and hold the Center Button of two headsets for 5 seconds until you
hear a voice prompt, “Intercom pairing”.
Pairing Headset A with Headset B
A
Blinking
&
=
“Intercom pairing”
B
Blinking twice
2. The SC2 will automatically pair
Confirms intercoms are paired
with a SCHUBERTH headset.
3. Repeat the steps above to pair with Intercom Friends C & D.
BA
8.2 Last-Come, First-Served
The intercom pairing queue is Last-Come, First-Served. If a headset has
multiple paired headsets for intercom conversations, the last paired
headset is set as the First Intercom Friend. For example, after the pairing
procedures listed above, headset (D) is the First Intercom Friend of headset
(A). Headset (C) is the Second Intercom Friend of headset (A), and
headset (B) is the Third Intercom Friend of headset (A).
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 32
Page 33
8 BLUETOOTH INTERCOM
Last-Come, First-Served
AB
YOU
ACB
YOU
ADCB
YOU
Intercom
Friend 1
Intercom
Friend 1
Intercom
Friend 1
Intercom
Friend 2
Intercom
Friend 2
Intercom
Friend 3
8.3 Two-Way Intercom
You can start or end an intercom conversation with an Intercom Friend by
tapping the Center Button.
1. Tap once for Intercom Friend 1.
Start/End with Intercom Friend 1
D
=
2. Tap twice for Intercom Friend 2.
Start/End with Intercom Friend 2
C
=
3. Tap three times for Intercom Friend 3.
Start/End with Intercom Friend 3
B
=
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 33
Page 34
8 BLUETOOTH INTERCOM
8.4 Multi-Way Intercom
Multi-Way Intercom enables conference-call-style conversations with up to
three Intercom Friends at the same time. While Multi-Way Intercom is in
progress, mobile phone connection is temporarily disconnected. However, as
soon as Multi-Way Intercom terminates, the mobile phone connection will be
reestablished.
8.4.1 Starting a Three-Way Intercom Conference
You (A) can have a Three-Way Intercom Conference with two other
Intercom Friends (B & C) by establishing two intercom connections
simultaneously.
1. Pair your headset (A) with those of two other Intercom Friends (B & C).
Pair with Intercom Friends B & C, refer to Section 8.1: “Intercom Pairing”
A
YOU
B
Intercom Friend BIntercom Friend C
C
2. Start an intercom conversation with one of the two friends in your intercom
group. For example,
you (A) may start an intercom conversation with the
Intercom Friend (B). Or, Intercom Friend (B) may start an intercom call
with
you (A).
Starting an Intercom Conversation with Intercom Friend B
A
YOU
B
Intercom Friend BIntercom Friend C
C
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 34
Page 35
8 BLUETOOTH INTERCOM
3. Then,
Intercom Friend (C)
(A)
you (A)
.
can call the
may join the intercom by making an intercom call to
Second Intercom Friend (C)
, or the
Second
you
Starting an Intercom Conversation with Intercom Friend C
A
YOU
B
Intercom Friend BIntercom Friend C
C
4. Now you (A) and two Intercom Friends (B & C) are having a Three-Way
Intercom Conference.
Three-Way Intercom
A
YOU
B
Intercom Friend BIntercom Friend C
C
8.4.2 Starting a Four-Way Intercom Conference
With three Intercom Friends connected, a new participant (D) can make it a
Four-Way Intercom Conference by making an intercom call to either (B) or
(C).
Starting a Four-Way Intercom
AC
BD
YOU
Intercom
Friend B
Intercom
Friend C
Intercom
Friend C
8.4.3 Ending Multi-Way Intercom
1. Press and hold the Center Button for 3 seconds until you hear a beep to
terminate all intercom connections.
2. Tap the Center Button to disconnect from your First Intercom Friend.
Double tap the Center Button to disconnect from your Second Intercom Friend.
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 35
Page 36
8 BLUETOOTH INTERCOM
8.5 Three-Way Conference Phone Call with
Intercom Users
You can have a Three-Way Conference Phone Call by adding an Intercom
Friend to the mobile phone conversation.
1. During a mobile phone call, tap the Center Button once, twice, or three
times to invite one of your Intercom Friends to the conversation.
Invite an Intercom Friend into Phone Conference
=
or
or
2. To disconnect the intercom during a conference phone call, tap the Center
Button once, twice, or three times.
Disconnect Intercom Friend from Conference
=
or
or
3. To disconnect the mobile phone call during a conference phone call, press
and hold the Center Button for 2 seconds.
End Phone Call from Conference
=
Note: When you have an incoming intercom call during a mobile phone
call, you will hear high tone double beeps.
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 36
Page 37
8 BLUETOOTH INTERCOM
8.6 Group Intercom
Group Intercom allows you to instantly create a Multi-Way Conference
Intercom with three of the most recently paired headsets.
Start the Group Intercom
1. Go through intercom pairing with up to three headsets you want to have
Group Intercom with.
2. Tap the (+) Button and (-) Button to begin Group Intercom.
Blinking
=
“Group intercom”
“ Group intercom
connected”
When all of the headsets are
connected together.
Terminate Group Intercom
To terminate Group Intercom, press and hold the Center Button for 3 seconds
during Group Intercom.
=
terminated”
8.7 Mesh Intercom Conference with Bluetooth
Intercom Participant
Users can use the existing Bluetooth intercom and Mesh Intercom function
at the same time. In this case, it is recommended to communicate with other
SCHUBERTH headsets via Bluetooth intercom connection and use Mesh
Intercom between SC2 headsets. A user who is in Open Mesh or Group
Mesh when using Mesh Intercom is able to include up to 3 of their Bluetooth
intercom friends. You can start a Two-Way Intercom conversation with one
“ Group intercom
of your three Intercom Friends to include them in the Mesh.
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 37
Page 38
8 BLUETOOTH INTERCOM
Note:
•
The audio quality will be reduced if a SC2 connects to 2 or more
Bluetooth intercom friends while in Open Mesh or Group Mesh when
using Mesh Intercom.
•
If a closed loop is created, as shown below, each user will experience
severe noise issues. SCHUBERTH recommends that a closed loop not be
created.
SCHUBERTH Headset
SC2SC2
Mesh Intercom
Bluetooth Intercom
•
If Bluetooth intercom is accidentally turned on during Mesh Intercom
communication between SC2 headsets, as shown below, you will
hear a voice prompt, “Mesh intercom disabled, Bluetooth intercom connected” every 1 minute. If you turn off the Bluetooth Intercom or
turn off the Mesh Intercom, the voice prompt will no longer come out.
SC2
SC2SC2
Mesh Intercom
Bluetooth Intercom
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 38
Page 39
8 BLUETOOTH INTERCOM
8.8 Universal Intercom
Universal Intercom allows you to have intercom conversations with users of
non-SCHUBERTH Bluetooth headsets. Non-SCHUBERTH Bluetooth headset
can be connected to the SCHUBERTH headset if they support the Bluetooth Hands-Free Profile (HFP). You can pair your headset with only one nonSCHUBERTH headset at a time. The intercom distance depends on the
performance of the Bluetooth headset to which it is connected. When a nonSCHUBERTH Bluetooth headset is paired with the SCHUBERTH headset, if
another Bluetooth device is paired via Second Mobile Phone Pairing, it will be
disconnected.
1. Press and hold the Center Button for 10 seconds.
=
2. Tap the (-) Button three times.
=
3. Tap the Center Button.
Enter into Universal Intercom
=
Pairing mode
“Conguration menu”
“ Universal intercom
pairing”
4. Put the non-SCHUBERTH Bluetooth headset in Pairing Mode. The headset
will automatically pair with a non-SCHUBERTH Bluetooth headset.
5. You can have Two-Way Intercom or Multi-Way Intercom communication
with up to three Intercom Friends using non-SCHUBERTH headsets by
following the procedures described below.
Example of a Three-Way Universal Intercom
YOU
Non-SCHUBERTH HeadsetSCHUBERTH Headset
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 39
Page 40
8 BLUETOOTH INTERCOM
Example of a Four-Way Universal Intercom
Non-
SCHUBERTH
Headset
YOU
SCHUBERTH
Headset
Non-
SCHUBERTH
Headset
Note: Some non-SCHUBERTH headsets may not support Multi-Way
Universal Intercom.
8.9 Mesh Intercom Conference with Two-way
Universal Intercom Participant
Users can use the existing Two-way Universal Intercom and Mesh Intercom
function at the same time. In this case, it is recommended to communicate
with non-SCHUBERTH headset via Two-way Universal Intercom
connection and use Mesh Intercom between SC2 headsets.
A user who is in Open Mesh or Group Mesh when using Mesh Intercom
is able to include one Universal Intercom Friend. You can start a Two-way Universal Intercom conversation with your Universal Intercom Friend to
include it in the Mesh.
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 40
Page 41
9. USING THE FM RADIO
9.1 FM Radio On/O
FM Radio On
=
FM Radio Off
=
9.2 Seek and Save Radio Stations
The “Seek” feature searches for radio stations.
1. Search for radio stations.
“FM on, ###”
“FM o”
Seek Stations Forward
=
2. Save the current station.
Enter Preset Selection Mode
=
3. Navigate through the preset numbers that you want to store.
Navigate Forward/Backward Through Preset Stations
Seek Stations Backward
=
“Preset (#)”
=
or
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 41
=
Page 42
9 USING THE FM RADIO
4. Save the station in the preset number you choose or delete the station
from memory.
Save Station to the Preset Number
=
“Save preset (#)”
Delete Station from Memory
=
“Delete preset (#)”
9.3 Scan and Save Radio Stations
The “Scan” function automatically searches for radio stations, starting with
the current station’s frequency, then up from there.
1. Scan for stations.
Start Scanning
=
“[FM frequency]”
2. The SCHUBERTH tuner pauses at each station it finds for 8 seconds
before moving to the next.
3. Save the current station. The station will be saved as the next preset
number.
Save the Current Station
=
“Save preset (#)”
4. Stop scanning.
Stop scanning
=
Note: You can use the SCHUBERTH Device Manager or the
SCHUBERTH SC2 App to save the preset stations.
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 42
Page 43
9 USING THE FM RADIO
9.4 Navigating Preset Stations
Using the methods above, up to 10 radio stations can be stored. You can
navigate through the saved stations.
Navigate through Preset Stations
=
9.5 Temporary Station Preset
The Temporary Preset feature automatically finds and saves the nearest 10
radio stations without changing your existing preset stations.
1. Automatically find and save 10 stations.
Temporary Stations
=
2. The temporary preset stations will be cleared when the headset reboots.
9.6 Region Selection
You can select the proper FM frequency range for your location from the
SCHUBERTH Device Manager or the SCHUBERTH SC2 App. Using the
region setting, you can optimize the seek function to avoid unnecessary
frequency ranges.
RegionFrequency rangeStep
Worldwide76.0 ~ 108.0 MHz± 100 kHz
North America, South
America and Australia
Asia and Europe87.5 ~ 108.0 MHz± 100 kHz
87.5 ~ 107.9 MHz± 200 kHz
Japan76.0 ~ 95.0 MHz± 100 kHz
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 43
Page 44
10. VOICE COMMAND
The Voice Command of the headset allows you to operate certain operations
by simply using your voice. You can control the headset completely hands-free
using the voice recognition. Multi-language Voice Command supports English,
French, German, Spanish, Italian, Chinese, Japanese, and Russian.
Speak a Voice Command List
Mode StatusFunctionVoice Command
Check battery"Hey Sena, Check Battery"
Volume Up“Hey Sena, Volume Up”
Standby/
Bluetooth
Intercom/
Mesh Intercom/
FM Radio/
Music
Standby/
Bluetooth
Intercom/
FM Radio/
Music
Volume Down“Hey Sena, Volume Down”
Phone Pairing “Hey Sena, Phone Pairing”
Bluetooth Intercom
Pairing
Start/End each
Bluetooth Intercom
Turn on Mesh Intercom“Hey Sena, Mesh On”
“Hey Sena, Pairing Intercom”
“Hey Sena, Intercom
[one, two, three]”
Mesh Intercom
Standby/
Bluetooth
Intercom/
Mesh Intercom
Turn off Mesh Intercom“Hey Sena, Mesh Off”
Mesh Grouping“Hey Sena, Mesh Grouping”
Switch to Open Mesh“Hey Sena, Open Mesh”
Switch to Group Mesh“Hey Sena, Group Mesh”
End the Bluetooth
intercom and
Mesh intercom
Play Music“Hey Sena, Play Music”
“Hey Sena, End intercom”
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 44
Page 45
10 VOICE COMMAND
Mode StatusFunctionVoice Command
Standby/
Intercom/
Mesh Intercom/
Music
•
•
Music/
FM Radio
•
•
MusicPause Music“Hey Sena, Stop Music”
FM RadioTurn off FM Radio“Hey Sena, FM Radio Off”
Answer an Incoming Call “Answer”
Turn on FM radio”Hey Sena, FM Radio On”
FM - Next Preset
“Hey Sena, Next”
Music - Next Track
FM - Previous Preset
“Hey Sena, Previous”
Music - Previous Track
Ignore an Incoming Call “Ignore”
Note:
•
You can set a language to another language by using the Headset
Language feature on the SCHUBERTH SC2 App.
•
If you set a language that does not support voice commands, the voice
command will work only with English commands.
•
You can see the another language’s voice command list on the
SCHUBERTH SC2 App.
•
Voice command performance may vary based on the environmental
conditions including riding speed, helmet type, and ambient noise.
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 45
Page 46
11. FUNCTION PRIORITY
11.1 Function Priority
The headset prioritizes connected devices in the following order:
(highest)Mobile phone
Mesh Intercom/Bluetooth Intercom
Music sharing via Bluetooth stereo
FM radio
(lowest)Bluetooth stereo music
A lower-priority function gets interrupted by a higher-priority function. For
example, stereo music will be interrupted by an Intercom Conversation; an Intercom Conversation will be interrupted by an incoming mobile phone call.
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 46
Page 47
12. CONFIGURATION SETTING
12.1 Headset Conguration Setting
Access the Configuration Menu
=
Execute Menu Options
=
Headset Configuration Menu
Navigate Between Menu Options
=
=
Voice Conguration MenuTap the Center Button
Phone PairingNone
Second Mobile Phone PairingNone
Phone Selective PairingNone
Media Selective PairingNone
GPS PairingNone
Delete All PairingsExecute
Universal Intercom PairingExecute
Factory ResetExecute
ExitExecute
12.1.1 Delete All Pairings
Delete All Bluetooth Pairing Information stored in the headset.
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 47
Page 48
12 CONFIGURATION SETTING
12.2 Software Conguration Setting
You can change the settings of the headset through the SCHUBERTH
Device Manager or the SCHUBERTH SC2 App.
12.2.1 Speed Dial
Assign phone numbers for speed dialing to make a phone call quickly.
12.2.2 Headset Language
You can select the device language. The selected language is maintained even
when the headset is rebooted.
12.2.3 Audio Equalizer (Default: O)
You can use the Audio Equalizer to increase/decrease the decibel level of
different frequency ranges of audio.
•
Balance will adjust all of the frequency ranges to be the same volume level
(0 dB).
•
Bass Boost will increase the bass range of audio (20 Hz - 250 Hz).
•
Mid Boost will increase the mid range of audio (250 Hz - 4 kHz).
•
Treble Boost will increase the high range of audio (4 kHz - 20 kHz).
12.2.4 VOX Phone (Default: Enable)
If this feature is enabled, you can answer incoming calls by voice. When you
hear a ringtone for an incoming call, you can answer the phone by saying
a word such as “Hello” loudly or by blowing air into the microphone. VOX Phone is temporarily disabled if you are connected to intercom. If this feature
is disabled, you have to tap the Center Button to answer an incoming call.
12.2.5 VOX Intercom (Default: Disable)
If VOX Intercom is enabled, you can initiate an intercom conversation with the
last connected intercom friend by voice. When you want to start intercom, say
a word such as “Hello” loudly or blow air into the microphone. If you start an
intercom conversation by voice, the intercom terminates automatically when
you and your intercom friend remain silent for 20 seconds. However, if you
manually start an intercom conversation by tapping the Center Button, you
have to terminate the intercom conversation manually. However, if you start
the intercom by voice and end it manually by tapping the Center Button, you
will not be able to start intercom by voice temporarily. In this case, you have
to tap the Center Button to restart the intercom. This is to prevent repeated
unintentional intercom connections by strong wind noise. After rebooting the
headset, you can start the intercom by voice again.
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 48
Page 49
12 CONFIGURATION SETTING
12.2.6 VOX Sensitivity (Default: 3)
VOX Sensitivity can be adjusted depending on your riding environment.
Level 5 is the highest sensitivity setting and level 1 is the lowest.
12.2.7 Bluetooth Intercom Audio Multitasking (Default: Disabled)
Audio Multitasking (Bluetooth Intercom Audio Multitasking and Mesh
Intercom Audio Multitasking) allows you to have an intercom conversation
while simultaneously listening to music, FM radio, or GPS instructions. The
overlaid audio is played in the background with reduced volume whenever
there is an intercom conversation and will return to normal volume once the
conversation is finished.
The Mesh Intercom Audio Multitasking feature is always on.
Note:
•
For Bluetooth Intercom Audio Multitasking to work properly, you need
to power the headset off and on. Please restart the headset.
•
Bluetooth Intercom Audio Multitasking will be activated during two-way
intercom conversations with a headset that also supports this feature.
•
Some GPS devices may not support this feature.
•
The Audio Multitasking feature can be configured through the Intercom-
Audio Overlay Sensitivity and the Audio Overlay Volume Management
settings.
The music, FM radio, and GPS volume will be lowered to play in the
background if you talk over the intercom while the overlaid audio is playing.
You can adjust the intercom sensitivity to activate this background audio
mode. Level 1 has the lowest sensitivity and level 5 has the highest sensitivity.
Note: If your voice is not louder than the sensitivity of the selected level, the
overlaid audio will not be lowered.
The music, FM radio, and GPS overlaid audio reduces in volume whenever
there is an ongoing intercom conversation. If Audio Overlay Volume Management is enabled, the volume level of the overlaid audio will not be
reduced during an intercom conversation.
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 49
Page 50
12 CONFIGURATION SETTING
12.2.10 HD Intercom (Default: Enable)
HD Intercom enhances the two-way intercom audio from normal quality to
HD quality. HD Intercom will become temporarily disabled when you enter into
a multi-way intercom. If this feature is disabled, the two-way intercom audio
will change to normal quality.
Note:
•
The intercom distance of HD Intercom is relatively shorter than that of
normal intercom.
•
HD Intercom will become disabled temporarily when Bluetooth Intercom
Audio Multitasking is enabled.
12.2.11 HD Voice (Default: Enable)
HD Voice allows you to communicate in high-definition during phone calls.
This feature increases the quality so that the audio will be crisp and clear
during phone call conversations.
If this feature is enabled, incoming phone calls will interrupt intercom
conversations and audio from the SR10 will not be heard during intercom
conversations. Three-Way Conference Phone Call with Intercom Participant
will not be available if HD Voice is enabled.
Note:
•
Refer to the manufacturer of your Bluetooth device that will be
connected to the headset to see if it supports HD Voice.
•
HD Voice is active only when Bluetooth Intercom Audio Multitasking is
disabled.
12.2.12 Smart Volume Control (Default: Disable)
Enabling Smart Volume Control automatically changes the level of the
speaker volume based on the level of the environment noise. You can enable it
by setting the sensitivity to low, medium, or high.
12.2.13 Sidetone (Default: Disable)
Sidetone is audible feedback of your own voice. It helps you to naturally
speak at the correct level according to varying helmet noise conditions. If this
feature is enabled, you can hear what you are speaking during an intercom
conversation or a phone call.
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 50
Page 51
12 CONFIGURATION SETTING
12.2.14 Voice Prompt (Default: Enable)
You can disable voice prompts by software configuration settings, but the
following voice prompts are always on.
Radio Data System (RDS) Alternative Frequency (AF) Setting allows a
receiver to re-tune to the second frequency location when the first signal
becomes too weak. With RDS AF enabled on the receiver, a radio station with
more than one frequency can be used.
12.2.16 FM Station Guide (Default: Enable)
When FM Station Guide is enabled, FM station frequencies are given by voice
prompts as you select preset stations. When FM Station Guide is disabled,
the voice prompts on FM station frequencies will not be given as you select
preset stations.
12.2.17 Advanced Noise Control™ (Default: Enable)
When Advanced Noise Control is enabled, the background noise is reduced
during an intercom conversation. When it is disabled, the background noise is
mixed with your voice during intercom.
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 51
Page 52
13. TROUBLESHOOTING
13.1 SC2 Factory Reset
To erase all of your settings and start fresh, the headset can be restored to
factory default settings using the Factory Reset feature.
=
“Headset reset, Good bye”
13.2 SC2 Remote Control Factory Reset
To erase all of your settings and start fresh, the SC2 Remote Control can be
restored to factory default settings using the Factory Reset feature.
=
13.3 Remote Control Pairing
The SC2 and the SC2 Remote Control come paired together.
They will automatically connect to each other when the SC2 and the SC2
Remote Control are powered on.
If you are using a SC2 Remote Control other than the one included in the
package, follow the procedure below to pair the SC2 and the SC2 Remote Control.
1. On the SC2, press and hold the Multi-function Button for 5 seconds.
Blinking
=
“ Remote control
pairing”
2. On your SC2 Remote Control, press and hold the (+) Button for 8 seconds
to enter Bluetooth-pairing mode.
=
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 52
Blinking
Page 53
13 TROUBLESHOOTING
3. The SC2 will automatically perform pairing with the SC2 Remote Control
in pairing mode.
When they are successfully
“ Remote control
connected, you will hear a voice
connected”
prompt.
13.4 SC2 Fault Reset
When the headset is not working properly, you can easily reset the unit.
1. Remove the installed SC2 from the helmet by lifting it up with the SC2
Remote Control cover.
2. Pull the antenna cable retainer out from its original position, and pull out the
connected cables from the upper gap in the space.
Note: You can reset the SC2 without disconnecting the cables from the
helmet.
3. Locate the Pinhole Fault Reset Button on the back of the SC2.
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 53
Page 54
13 TROUBLESHOOTING
4. Gently insert a paperclip into the hole and tap the Pinhole Fault Reset
Button with light pressure.
=
5. The headset will shut down.
Note:Fault Reset will not restore the headset to factory default settings.
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 54
Page 55
Producer: Sena Technologies, Inc
19, Heolleung-ro 569-gil, Gangnam-gu
Seoul 06376, Republic of Korea
Importer in Europe: SCHUBERTH GmbH
Stegelitzer Straße 12
D-39126 Magdeburg, Germany
Importer in US: SCHUBERTH North America
9920 Pacific Heights Blvd., Suite 150
San Diego, CA 92121
WWW.SCHUBERTH.COM
SC2 Motorcycle Bluetooth® Communication System with Mesh Intercom™ | 55
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.