Page 1
P147308
The Actassi
system
Catalogue 2018
Seamless end-to-end network connectivity
Page 2
Actassi puts all the
dierences aside!
The best features
of our local
brands and
ranges are now
merged into one,
complete global
system – Actassi.
Page 3
P126306
Contents
The Actassi system 5
1
1
P126513
P134679
P110434
Actassi Copper solution 19
Index 41
Note 42
2
3
4
LSB03160EN 01/2018
Version : 1.1
3
Page 4
P126280
P126280
Page 5
A short Actassi summary
Here is a short summary for you: Actassi is Schneider Electric’s new global stateof-the-art range for networking and connectivity infrastructure solutions, created
for buildings and data centres. It consists of the best performing features from
local Schneider Electric brands such as LexCom, Infraplus, Clipsal Datacomms,
Sarel and Himel. To be able to oer every installer around the world, the best-ofthe-best solutions, we have created ONE single system; Actassi.
1
Searching for a smaller
sized home solution?
LexCom Home should
be your choice. You'll
get data, TV and
telephone in all rooms,
and even access to all
medias at the same
time from the same
outlet.
All products are designed to give superior
usability and performance. They exceed the
most advanced international standards, such
as ISO/IEC 11801: 2011 Ed2.2 for the new
S-One connector. All S-One connectors are
manufactured to provide exceptional Cat 5e,
Cat 6 and Cat 6
unshielded data networks.
Furthermore Actassi is fully integrated with
a wide range of other Schneider Electric
solutions and products, such as the Total Ofce
Performance system including products to
create a true organic ofce.
performance for shielded and
A
The Actassi system consists of a
comprehensive set of products:
> Connectors for Cat 5e, Cat 6 and
performance
Cat 6
A
> Cross-connect panels
> Copper and bre optic LAN cables
> Patch cords and connecting hardware
> Cabling and server enclosures
P126306
LSB03160EN 01/2018
Version : 1.1
5
Page 6
Building
Actassi
Green Premium to
guarantee our products
are compliant with
International Environment
Regulations & Standards
(RoHS, REACH, PEP and
EoLI)
Reliable cabling solution &
proven technology backed
by extended system
warranty
Superior connectivity
with compliance of
international standards
(TIA/EIA, ISO/IEC,
AS/NZ)
Apply the latest building
management technologies
with proven PoE+
connectivity to increase
eciency of power usage
Intelligent Management, enclosures and Pre-term copper solutions are available
on project mode. Please contact your dealer.
Page 7
Pre-term Copper
Intelligent
Management
P143281
solutions
1
Enclosures
P140788
PB501435
173655763
P147038
Superior cable
& Connectivity
Page 8
Data Center
Actassi
Schneider electric can provide you a complete solution
to create your data center. Please, contact your dealer.
Future proof application
& above-the-standard
performance to maximize
the total lifecycle of
Actassi solution
Space optimization
to maximize ROI by
utilizing the scared space
resources in data center
Easy deployment to
reduce the construction
time needed for new
data center
Real time monitoring to
secure network continuity
of physical layer. Minimize
downtime that is caused
by human error
Page 9
Intelligent
Network racks
Management
and cablinets
1
High Density
Future Proof
connectivity
1135343
Fiber Solution
Superior cable
& Connectivity
Page 10
Superior usability
By constructing a complete system, we have made sure that there will never be
incompatible dierences in-between parts. But as an installer, we believe you
would like to know the specics. Let’s take a closer look at some less visible
Actassi advantages!
Actassi system
With innovations such
as the S-One connector
and the sliding 19”
patch panels, Actassi
allows you to work
faster. Installation time
will be decreased by
up to 20%, still
high-performing
network cabling is
assured.
P121600
The fast and trouble-free Actassi S-One connector
The One-piece RJ45 connector is tool-less to open and close. Advantages such as the colour
coding, smart bridle, U-shaped cable entry and automatic 360° earthing allow you to connect up
to 50 % faster. A cutting plier is all the tooling you need. Actassi S-One is designed by Schneider
Electric, manufactured in our state-of-the-art factory in Denmark and is fully compliant with
the latest standard ISO/IEC 11801: 2011 Ed2.2.
10
P127364
The pre-equipped 19" panels
The Actassi 19" patch panels with sliding and quick-x function, automatic earthing, quick-release
button and rear cable identication will delight any professional.
Version : 1.1
LSB03160EN01/2018
Page 11
Actassi helps you
get more jobs done
by speeding up each
task.
1
P126926
Page 12
Install seamless
end-to-end connectivity
Actassi includes everything needed to install and operate
network connections simply and intuitively.
Technical innovations and ergonomic features exceeding
the demands of end-users and installers, enhance
productivity in every workplace.
Actassi is easy to
specify, install, use and
upgrade. Together with
our OptiLine inst allation
system you will have a
very exible network
access.
P111569
Quick Fix
Our 19" panels are all
equipped with the
Quick Fix function,
allowing simple, rm and
convenient inst allation
and maintenance.
PB501435P124895
Actassi 19" Enclosures
A complete range of products including all sizes
of enclosures, from 6 units to 47 units with
different widths, depths and compositions.
Actassi 19" Panels
Sliding function, automatic earthing, quick-release
button and rear cable identication make the
Actassi 19" panel a delight to install.
12
P121600
Actassi S-One – Twice as fast
The new Actassi S-One RJ45 connector, with
features like the smart bridle, is up to 50 % faster
to connect than most other connectors.
Version : 1.1
147329
LSB03160EN01/2018
Page 13
P130042
Cable management for perfectionists
Every cord and cable is easily xed and fastened
in its designated place.
OptiLine
Consolidation point
Performa
Mesh trays
1
P130041
Clear marking
Both patch panels and connector face plates are
equipped with a system for clear marking.
P127320
Expand in no time
The patch panels are pre-equipped and have
benets such as the Quick Fix and a convenient
sliding function.
LSB03160EN 01/2018
Version : 1.1
13
Page 14
Complete peace of mind
Did you connect the right wire? Did you remember earthing? With Actassi you
never have to worry again. The shielded connectors have an automatic 360°
earthing, so you will save time and provide safe installations simultaneously.
But security isn’t only a built-in feature in products. It’s also a philosophy that
has governed the way we have designed the Actassi support services
and warranties.
We oer comprehensive
training programmes
as well as extensive
warranties.
Actassi system warranty
covers the complete
network, from
the technical room
to the workstation.
Ask your local
Schneider Electric
sales oce for detailed
information on
the warranties and
support resources
in your country.
p126681
You will get it right, intuitively
Actassi is built on intuitive installation
technology, making it very hard to fail. But
if there are any uncertainties, don’t hesitate
to call your local support services.They are
happy to answer your questions. And if there
is something you would like to excel at,
you are always welcome to join our training
programmes.
Certied standard and global accessibility
All Actassi products are certied to the highest
standards by a third party. Several products
actually exceed international standards to give
you true top-class performance and reliable
connectivity. Our worldwide presence and
well-known distribution partners also ensure
both global and local access to our products
and services.
P130046
The Digital Rule helps you select products
Do you nd it hard to select RJ45 connectors,
patch panels, cables and enclosures? Visit
schneider-electric.com and try our Digital Rule.
It’s an intelligent online e-catalogue which will
facilitate your choices and ensure an error-free
specication.
P63309
14
Version : 1.1
LSB03160EN01/2018
Page 15
Environment in focus
Energetic and environmental responsibility lies at the core of Schneider Electric
culture and strategy. We strive to reduce the environmental impact of our products
throughout their entire life-cycle, particularly through eco-design and
eco-production.
Actassi is compliant
with RoHS, the REACH
European directives
and PEP Eco passport.
Product Environmental
Prole available
on request.
1
P127354
Eco-design
The European Union enacted an Energy using
Products (EuP) framework directive in 2005
(directive on the eco-design of products) which
seeks to promote eco-design approaches in
priority sectors, or even to specify the aims of
impacts for some products.
Although Schneider Electric’s supply is outside
of the EuP target, it generalises the eco-design
approach to all its developmental activities and
undertakes to communicate the environmental
features of its products through Product
Environmental Proles (PEPs).
Product Environmental Prole
For each product Schneider Electric undertakes
to publish a Product Environmental Prole
(PEP). It provides customers with information on
their environmental performances during their
life cycle as well as the best treatment solutions
at the end of their life. To ensure transparency
and the validity of the data, it complies with
ISO 14025 in an inter-professional programme
which sets shared calculation and drafting rules
for publishing the environmental impacts of
products.
P131634
LSB03160EN 01/2018
Version : 1.1
15
Page 16
Actassi 19" patch panels
The Actassi 19" panels are indeed an installer’s delight! They are innovative,
simple and ecient. They are also part of the global Actassi product portfolio
for Network Connectivity including connectors, cables and enclosures.
Actassi is also a vital component of TOP – the Total Oce Performance system
– making workspaces energy ecient, exible and comfortable. TOP includes
everything from power and data distribution, to safety systems and lifespace
controls. So, when you choose Actassi you’ll get superior usability and a truly
seamless end-to-end connectivity.
16
P147328
Version : 1.1
LSB03160EN01/2018
Page 17
Making professional IT and
network installations easy
Now, furnishing or main taining our 19" racks with panels couldn’t be done
easier or faster. Actassi panels are all equipped with the Quick Fix function,
a mechanism mounted at each side of the 1U panel, which helps them to be
quickly opened.
P111569
All Actassi panels are
equipped with the
smart and innovative
Quick Fix function.
Fibre optic
Data
1
P111437
A panel for every need
We’ve got panels for bre optic, data and
telecom. They have all been developed with
two words in focus - easy and smart. Some
examples; Quick Fix function, sliding panels,
clear marking and easy cable management.
P111548
Quick Fix
Just press the button
and the panel smoothly
slides out. Other Quick
Fix secrets are the
guiding n gers and the
pre -mounted screws.
The integrated label
holder gives the panel a
unique identity.
P110643
Homogeneous design
Actassi is not only a high
quality system, it also
looks good!
The appearance is really
professional since we
have kept the same
aesthetics for the whole
range.
Telecom
The bre optic panels also have a highly
developed protection against dust.
And the best of it all, the panels are also
available pre -equipped, to make your ordering
and installation as simple as possible.
Of course power panels are also part of our offer.
P110642
Future proof
All Actassi products
are part of our modular
offer for creating a
professional IT and
network environment.
The robust design,
construction and
high-quality materials
are other long-lasting
guarantees. That’s why
the Actassi products are
future proof.
P110644
Good over view
The transparent front lids
and the top cover protect
the patchcords and
bres, and give a clear
visibility of the inside.
LSB03160EN 01/2018
Version : 1.1
17
Page 18
P111203
18
Version : 1.1
LSB03160EN01/2018
Page 19
Actassi Copper solution
Connectors ...................................................................... 20
S-One ..................................................................................................... 24
S-110 ...................................................................................................... 25
Cables .............................................................................. 27
CL-C Copper LAN cables - Category 5e ................................................. 30
CL-C Copper LAN cables - Category 6 ................................................... 31
CL-MNC Copper LAN cables Category 6A.............................................. 32
CP-Link and patch cords ................................................... 33
CL-MNC Copper - Category 6 ................................................................. 33
CL-MNC Copper - Category 6A............................................................... 34
Panels ..............................................................................35
S-One ..................................................................................................... 36
S-110 ...................................................................................................... 37
Cable management andaccessories ................................ 38
S-One, S-One DPM and S-110 ............................................................... 39
2
LSB03160EN 01/2018
Version : 1.1
19
Page 20
Actassi S-One RJ45 connectors
P121615
P121600
PoE+
The Actassi S-One
connector is now
certied and fully
compliant with
the PoE+ standards
by Delta, allowing
transport of up to 30W
in the data cable.
Actassi S-One with one-piece design
for faster and safer installations
Without any loose parts the Actassi S-One connector is more compact, easier to
handle and up to 50 % faster to connect. The connector is delivered open, ready
to connect. It has an automatic 360° cable earthing, a simple locking termination
and a very smart locking function. The robust one-piece design is suitable for
all applications, and in the Actassi S-One range you’ll nd both unshielded and
shielded connectors of all categories.
P121597
Ready... Steady... Done.
S-One is delivered open.
Just inser t the cable
in the central
U-shaped entry.
P121620
Close the smart bridle –
it will automatically lock
the cable and provide
360° earthing.
P121599
Shut the connector.
A “click” conrms that it’s
locked into its rm and
reliable position.
20
Version : 1.1
LSB03160EN01/2018
Page 21
Actassi S-One
benets
U-shaped cable entry with
a smart bridle
Despite being compact in size, the connector
has enough space inside for your work.
All functions are designed to ease your installation.
Safe and automatic
360° earthing
Actassi S-One easily provides automatic
earthing without any tools.
Protected IDC
With Actassi S-One it’s nearly impossible to
damage cables or ngers, since the IDC is
concealed in a cavity.
P121610
P121611
Smart bridle with
elastomer insert for
cable locking reduces
risk of damaging cables.
U-shaped cable entry.
Easy access for all
cables.
2
P121614
Central cable entry for
optimized performance.
Automatic 360° earthing
with spring-loaded
locking and earthing
bridle.
Ergonomic design
P121619 P121616
Insulated plastic IDC
housing eliminates
short-circuit between
conductors and metal
body.
Installing shouldn’t
be painful! So in the
Actassi S-One range
it isn’t.
Bridle with elastomer
insert (unshielded) for
convenient locking and
soft touch.
Smooth design with
rounded edges.
Touch-friendly materials.
P121618
P121622
P121609 P121608
Integrated earth-drain
contact provides double
earthing.
Re-open
in two clicks
You can hear the
Actassi S-One
opening and closing.
Quick-release buttons
for tool-less re-opening.
Reduced risk of
damaging connections.
Re-close with a simple
click-click.
LSB03160EN 01/2018
Version : 1.1
21
Page 22
Actassi S-One
is colour-coded
The Actassi S-One wire organizers are colour-coded
to make performance identication safer and easier.
Both unshielded and shielded connectors are coded
according to the same system. Green for Cat 5e,
light blue for Cat 6 and dark blue for Cat 6
Integrated hook
for the 19” rack.
Practical eco-box
• Box of 12 connectors.
• Connectors delivered open,
ready to connect.
• Cardboard package for easy
recycling.
P121621
.
A
Unshielded
The unshielded Actassi S-One connectors have
a smooth feel. The design promotes safety and
comfort by its nely contoured shape, edges
and elastomer insert.
Shielded
The shielded Actassi S-One connectors have
two very time saving and safe features.
It’s the spring-loaded bridle for locking and
automatic 360° earthing, and the integrated
earth drain contact, which provides efcient
double earthing.
P11110 5
Full compliance with ISO/IEC 11801: 2011 Ed2.2
To get your complete network installation classied you need to work with
classied components. That’s why you should choose our solutions. We provide
seamless end-to-end connectivity through safe, speedy and reliable network
installations.
We are constantly adjusting and updating our portfolio, and at the same time
making sure that they are fully compatible with older and future solutions.
22
Version : 1.1
LSB03160EN01/2018
Page 23
Cat 5e
Cat 6
Cat 6
A
P121211
P121214
P121212
P121215
P121213
2
P121216
Every part in our Actassi range is certied to deliver what we
claim they will. The Actassi S-One components are produced in
Europe and fully compliant with ISO/IEC 11801: 2011 Ed2.2 for
, so you can always count on an outstanding performance
Cat 6
A
and reliability.
LSB03160EN 01/2018
Version : 1.1
2010-227, 2010-228, 2010-229
23
Page 24
Actassi Copper solution
Connectors
S-One
■ Performance categories: Cat 5e, 6 and 6A, unshielded and shielded
■ Material: unshielded in ABS plastic, shielded in zamak
■ Size: height 1.1 in (28 mm), width 0.7 in (18 mm), depth 1.37 in (35 mm)
■ Applicable standards:
v ISO/IEC 11801: 2011 Ed2.2, class EA permanent link and channel
v IEC 60603-7-51 Cat 6A connecting hardware
v ANSI/TIA-568-C.2 Cat 6
b One-piece design and U-shaped cable entry
■ Tool-less IDC termination
■ Earthing (shielded): metallic, 360° self-adjusting, plus drain wire contact
■ Operational temperature range: -40°F to +158°F (-40°C to +70°C).
connecting hardware
A
P121213
P121216
S-One C6
– Cat 6
A
A
Description Qty/pack Ref. No
RJ45 Connector Cat 6A unshielded 12 VDIB1772XU12
RJ45 Connector Cat 6A shielded 12 VDIB1772XB12
24
Version : 1.1
LSB03160EN01/2018
Page 25
Actassi Copper solution
P147510
Connectors
S-110
Category 5e and 6
■ Performance category: Cat 5e, unshielded
■ Material: ABS plastic
■ Size: height 22 mm, width 16 mm, length 36 mm
■ Applicable standards: ISO/IEC 11801:2011 Ed2.2, ANSI/TIA-568-C.2
■ Keystone footprint
■ Punch-down IDC termination
■ Operational temperature range: -14°F to +140°F (-10°C to +60°C)
■ Individual bags with cabling instructions.
S-110 C5e – Cat 5e
Description Qty/pack Ref. No
Without shutters
Connector RJ45 keystone unshielded, black 1 ACTRJSM5ENSUBK
2
P134686
P134688
■ Performance category: Cat 6, unshielded
■ Component certied by 3
■ Material: ABS plastic
■ Size: height 22 mm, width 16 mm, length 36 mm
■ Applicable standards: ISO/IEC 11801: 2011 Ed2.2, ANSI/TIA-568-C.2
■ UL listed
■ Keystone footprint
■ Punch-down IDC termination tool
■ Patented shutter
■ Available in various colours
■ Operational temperature range: -14°F to +140°F (-10°C to +60°C)
■ Individual bag with cabling instructions
■ Actassi S-110 Quick termination punch down tools compatible, see page 26.
rd
party laboratory
S-110 C6 – Cat 6
Description Qty/pack Ref. No
Without shutters Colour
Connector RJ45, keystone unshielded Black 1 VDIB17766UBK
White 1 VDIB17766UWE
LSB03160EN 01/2018
Version : 1.1
25
Page 26
Actassi Copper solution
P147471
Punch Down Tool
Connectors
S-110
Accessories
Punch Down Tool
■ Exceptional material properties & design
■ Suitable for 22-26 AWG wires
■ Adjustable impact pressure, between low and high
■ It comes with both 110 and Krone type of blades
■ Sure lock blade holder
■ The tool bit (hardened steel) can punch as well as trim the conductor
■ Material: high impact ABS
■ RoHS Compliant.
Description Qty/pack Ref. No
Punch Down Tool 1 DXYTOOLPUNCH
26
Version : 1.1
LSB03160EN01/2018
Page 27
Actassi copper cables
Three ranges that cover all needs
CL-C offe r
Standard copper LAN cables for your day-to-day installations, based on
U/UTP and F/UTP cables, from category 5 to category 6
The CL-C cables are reliable and well-known, with good performance.
CL-MNC offer
High-end copper LAN cables for performances from category 6 to
1000 MHz. Exceeding international standards by 3 dB
A
P119665 P119658
category 7
minimum on NEXT. Full Delta certication for components.
.
A
2
Actassi oer overview
Performances
Type of shielding
Cat 5 Cat 5e Cat 6 Cat 6
U/UTP CL-C*
F/UTP CL-C* CL-C* CL-C
SF/UTP CL-C
U/FTP CL-MNC CL-MNC
F/FTP CL-MNC CL-MNC
S/FTP CL-MNC**
* Available with PVC or LSZH jacket material.
** Available with LSZH or LSFRZH (LSZH + improved Fire Resistance) sheath material.
CL-C*
CL-MNC
A
CL-C
CL-MNC
Cat 7
A
Cable standardisation
X/X TP
TP= Twisted Pair
F= Foil screened, U=Unscreened
F=Foil screened, S=Braid screened, SF=Braid & Foil screened, U=Unscreened
LSB03160EN 01/2018
Version : 1.1
27
Page 28
Actassi copper cables
Some important advantages
CL-C, CL- M NC, CL-MX con duc tiv ity
For the whole offer, the conducting side of the shield is turned outwards.
Thus, there is no need to turn the shield inside out before applying the
connector to have a good conductivity. You will gain time during installation,
there will be no destruction of the shield and you will get very good
shielding.
CL-MNC crossller with optimized design and micro-blades
With an optimized design and specic micro-blades, you will have better
performances in NEXT and ELFEXT, and a better resistance to the
mechanical constraints.
P119664 P119666
P120017
CL-C, CL-MNC, CL-MX dual cables
In order to facilitate cable laying, the majority of our cables are available
in dual version. Only one operation to install two cables.
Certicates
All LAN cables from Category 6 are certied at a component level by
the independent third-party laboratory Delta. Certicates are regularly
updated to be compliant to the latest and highest international standards.
Cert 7A,
,
A
28
Cert 6, Cert 6
Version : 1.1
LSB03160EN01/2018
Page 29
Performances
Frequency (MHz)
250 500 1000
Attenuation (dB)* 32.8 33 45.3 45.3 45.3 61.9
NEXT (dB)* 38.3 42.3 33.8 33.8 54.8 60.4
ACR-F (dB)* 19.8 23 13.8 13.8 24 35.3
Propagation speed (%c) 68 68 70 70 82 78
Cat 6
Cat 6
CL-C U/UTP
CL-C F/UTP
CL-C SF/UTP
CL-MNC U/UTP
CL-MNC U/FTP
A
P110559P120018 P120040P147103 P120018P120015P147102P120023 P120021P120021P120023P120021P123954
2
Cat 7
CL-C F/UTP
CL-MNC U/UTP
CL-MNC F/UTP
CL-MNC U/FTP
CL-MNC F/FTP
A
CL-MNC F/FTP
CL-MNC S/FTP
CL-MNC S/FTP
* Guaranteed characteristics given for 328.08 ft (100 meters) at maximum frequencies:
250 MHz for category 6, 500 MHz for category 6
LSB03160EN 01/2018
, 1000 MHz for category 7A.
A
Version : 1.1
29
Page 30
Actassi Copper solution
r
2D4P5IPV3B_Cat5e_UTP_PVC_green
Cables
CL-C Copper LAN cables - Category 5e
Category 5e cables
The Actassi Category 5e 4-pair cable consists of 24 AWG solid-copper conductors
insulated with high-density polyethylene. The insulated conductors are tightly
twisted into pairs and covered with PVC material.
The cable provides excellent high-speed transmission, is certied to 100 MHz.
This product is UL listed with a CMR or CMP re rating.
Product features
b Compliant with enhanced Category 5 standard.
CL-C Cat 5e U/UTP
Specications
b 24 AWG. 4 pairs.
Performances
b Complies with TIA/EIA-568-C.2 Category 5e and ISO/IEC 11801 Class D standards.
ACT4P5EUCP1ARXGR
Cat5e UTP Cable_dwg
Conducto
Insulation
Jacket
Rip Cord
NEXT Guaranteed Standard IEC
100 MHz 37.3 dB u 35.3 dB
Use
b Applications such as 155 Mb/s ATM, 622 Mb/s ATM and IEEE 802.3 1000 Base-T
(Gigabit ethernet) standards, using parallel transmission technology.
Type Weight Diameter Sheath Cond/Length Ref. No
4 pair cable 0.020 Ib/ft
(30 kg/km)
0.20 in
(5.3 mm)
0.189 in
(4.8 mm)
PVC - CMR 1000 ft
(305 m)
CMP 1000 ft
(305 m)
ACT4P5EUCR1ARXGR
ACT4P5EUCP1ARXGR
30
Version : 1.1
LSB03160EN01/2018
Page 31
Actassi Copper solution
2D4P6IPV3B_Cat6_UTP_green
Cables
CL-C Copper LAN cables - Category 6
Category 6 cables
The Category 6 cable consists of 4 pairs of solid insulated copper 23 AWG and is UL
listed with a CMR or CMP re rating.
The cable provides a signicant margin above the minimum Category 6 near end
crosstalk NEXT requirement of ANSI/TIA/EIA-568 and ISO/IEC 11801.
CL-C Cat 6 U/UTP - CMR
Specications
b 23 AWG. 4 pairs. Centre ller to maintain pair twisting and optimum NEXT and RL
performance.
Performances
b Complies with TIA/EIA-568-C.2 Category 6 and ISO/IEC 11801 Class E standards.
ACT4P6UCR1ARXGR
Cat6 UTP Cable
Cat6_UTP_CMP_green
ACT4P6UCP1ARXGR
Cat6 UTP Cable2
Conductor
Insulation
Filler
Rip Cord
Jacket
Conductor
Insulation
Jacket
Rip Cord
NEXT Guaranteed Standard IEC
250 MHz 40.3 dB u 39.3 dB
Use
b In horizontal cabling situations.
b High-bandwidth applications, including the IEEE 802.3AB 1000 Base-T (Gigabit
ethernet),TIA/EIA 1000 Base-TX, 1.2 Gb/s ATM and any future applications designed for
Category 6/Class E cabling, broadband video.
Type Weight Diameter Sheath Cond/Length Ref. No
4 pair cable 0.028 lb/ft
(43 kg/km)
0.236 in
(6 mm)
PVC - CMR 1000 ft
(305 m)
ACT4P6UCR1ARXGR
CL-C Cat 6 U/UTP - CMP
Specications
b 23 AWG. 4 twisted pairs. Optimised twisted pair cable makes better NEXT and RL
performance.
Performances
b Complies with TIA/EIA-568-C.2 Category 6 and ISO/IEC 11801 Class E standards.
NEXT Guaranteed Standard IEC
250 MHz 40.3 dB u 38.3 dB
Use
b In horizontal cabling situations.
b High-bandwidth applications, including the IEEE 802.3AB 1000 Base-T (Gigabit
ethernet),TIA/EIA 1000 Base-TX, 1.2 Gb/s ATM and any future applications designed for
Category 6/Class E cabling, broadband video.
Type Weight Diameter Sheath Cond/Length Ref. No
4 pair cable 0.023 Ib/ft
(35 kg/km)
0.198 in
(5 mm)
CMP 1000 ft
(305 m)
ACT4P6UCP1ARXGR
2
LSB03160EN 01/2018
Version : 1.1
31
Page 32
Actassi Copper solution
Cables
CL-MNC Copper LAN cables Category 6A
P7190170_green
ACTTG4P6AUCP1ARGR
ACTTG4P6AUCP1ARGR
green
ACCTG4P6ASCM3BU_
ACTTG4P6ASCP1ARGR
ACTTG4P6ASCP1ARGR
Conductor
Insulation
T-Top
Jacket
Drain Wire
Conductor
Insulation
Tape
T-Top
Shield
Jacket
The Cat 6A cable consists of 4 pairs of solid insulated copper 23 AWG. The cable
provides a signicant margin above the Category 6
requirement of TIA/EIA 568-C.2 Category 6
Alien Crosstalk (ANEXT)
A
and ISO/IEC 11801 Class Ea.
A
CL-MNC Cat 6A U/UTP
Specications
b 23 AWG. 4 pairs. Centre ller to maintain pair twisting.
Performances
b Complies with TIA/EIA-568-C.2 Category 6A and ISO/IEC 11801 Class Ea standards.
NEXT Guaranteed Standard IEC
500 MHz 35.8 dB u 33.8 dB
Use
b In horizontal cabling situations
b Support 10G Base-T, 1000 Base-T and 1000 Base-TX LANs and broadband video
applications.
Type Weight Diameter Sheath Cond/Length Ref. No
4 pair
cable
0.053 Ib/ft
(79 kg/km)
0.325 in
(8.1 mm)
0.33 in
(8.4 mm)
PVC - CMR 1000 ft
(305 m)
CMP 1000 ft
(305 m)
ACTTG4P6AUCR1ARGR
ACTTG4P6AUCP1ARGR
CL-MNC Cat 6A F/UTP
Specications
b 23 AWG. 4 pairs. Centre ller to maintain pair twisting.
Performances
b Complies with TIA/EIA-568-C.2 Category 6A and ISO/IEC 11801 Class Ea standards.
NEXT Guaranteed Standard IEC
500 MHz 35.8 dB u 33.8 dB
Use
b In horizontal cabling situations
b Support 10G Base-T, 1000 Base-T and 1000 Base-TX LANs and broadband video
applications.
Type Weight Diameter Sheath Cond/Length Ref. No
4 pair
cable
0.053 Ib/ft
(79 kg/km)
0.295 in
(7.5 mm)
PVC - CMR 1000 ft
(305 m)
CMP 1000 ft
(305 m)
ACTTG4P6ASCR1ARGR
ACTTG4P6ASCP1ARGR
32
Version : 1.1
LSB03160EN01/2018
Page 33
Actassi Copper solution
Cat6_UTP_PatchCord
ACTPC6UBCMxxABU
Cat6_UTP_PatchCord_red
ACTPC6UBCMxxARD
CP-Link and patch cords
CL-MNC Copper - Category 6
CL-MNC Patch cord U/UTP Cat 6
Specications
b 300 MHz, outer sheath CM - PVC
b Wiring sequence: T568B
b 100 % performance tested and wired T568B
Type Colour of sheath Length Ref. No
4 pairs Blue 1 ft ACTPC6UBCM01ABU
3 ft ACTPC6UBCM03ABU
6 ft ACTPC6UBCM06ABU
9 ft ACTPC6UBCM09ABU
15 ft ACTPC6UBCM15ABU
Red 1 ft ACTPC6UBCM01ARD
3 ft ACTPC6UBCM03ARD
6 ft ACTPC6UBCM06ARD
9 ft ACTPC6UBCM09ARD
15 ft ACTPC6UBCM15ARD
2
LSB03160EN 01/2018
Version : 1.1
33
Page 34
Actassi Copper solution
CP-Link and patch cords
CL-MNC Copper - Category 6A
P147326
ACTPTG6ASBCMxxABU
P147327
ACTPTG6ASBCMxxARD
CL-MNC Patch cord F/UTP Cat 6
Specications
b 500 MHz, outer sheath CM - PVC
b Wiring sequence: T568B
b 100 % performance tested and wired T568B
Type Colour of sheath Length Ref. No
4 pairs Blue 1 ft ACTPTG6ASBCM01ABU
Red 1 ft ACTPTG6ASBCM01ARD
A
3 ft ACTPTG6ASBCM03ABU
6 ft ACTPTG6ASBCM06ABU
9 ft ACTPTG6ASBCM09ABU
15 ft ACTPTG6ASBCM15ABU
3 ft ACTPTG6ASBCM03ARD
6 ft ACTPTG6ASBCM06ARD
9 ft ACTPTG6ASBCM09ARD
15 ft ACTPTG6ASBCM15ARD
34
Version : 1.1
LSB03160EN01/2018
Page 35
Panel range with S-One,
and S-110
Actassi data panels
The data panels con tain a front conguration for 24 RJ45 connectors. All panels
have the smart Quick Fix function. They are also available pre- equipped with
connectors, shutters, label holders and a rear cable organizer. We try to make
your life as easy as possible.
P110421
P121216
The data panel is
available pre-equipped
with the innovative
S-One connectors.
2
P110429
Sliding helps installation
Maintenance and extensions are smoothly performed
with the help of the Quick Fix sliding function.
P110418
Cable management
Apart from the systems
with colour codes,
labels and numbers,
the technical setup at
the rear of the panel is
designed to enhance
order. Cables of various
diameters are easily
mounted and kept in
place in specied slots.
P110417
Rear position numbers
Keeping track of each
RJ45 could sometimes
be very hard. Actassi
is changing all of that!
The cable numbers at
the rear correspond
to those at the front,
simplifying installation
and maintenance from
both sides of the rack.
P121597
Actassi S-One
The connectors are a one-piece design for very
fast and reliable wiring. Actassi S-One exceeds
component hardware certication for standards like
ISO/IEC 11801: 2011 Ed2.2 for Cat 6
optimized network performance.
10607
P1
Automatic earthing
An automatic earthing
for FTP/STP versions is
integrated in the panel.
P110416
Clear front marking
Each panel plate has an
openable label holder.
Print your own labels
or use the included
versions with preprinted port numbers.
Each shutter can also
be colour coded for
quick identication in
both open and closed
positions.
, ensuring
A
LSB03160EN 01/2018
Version : 1.1
35
Page 36
Actassi Copper solution
P111249
Panels
S-One
Empty sliding panel for S-One connectors 1U 24 ports
■ Empty sliding 19" copper panel (without connectors)
■ 1U height
■ 24 RJ45 ports
■ 1 Quick Fix function on both sides to allow a simple, quick xing position and
sliding feature
■ Available in two versions:
v evolution: panels equipped with 24 shutters in light grey, 4 label holders, and
one cable manager at the rear
v basic: panels without shutters, label holders, cable manager
■ Metal sheet: thickness 0.047 in (1.2 mm). Dark grey RAL 7016
■ Plastic parts in PA66 GF20 or PA6
■ Simple clicking connectors for mounting
■ Automatic earthing with the pre-equipped bus bar for FTP/STP versions.
Evolution version: pre-equipped with 24 light grey shutters, 4 label holders, 1 rear cable
organizer
Description Ref. No
Empty panel 1U UTP 24 ports VDIG112241U
Empty panel 1U FTP/STP 24 ports VDIG112241F
36
Version : 1.1
LSB03160EN01/2018
Page 37
Actassi Copper solution
P133076
Panels
S-110
Equipped xed panel with S-110 connectors, Cat 5e and Cat 6
UTP, 1U 24 ports,
■ Equipped xed 19" copper panel (with connectors, pre-mounted)
■ 1U height
■ 24 RJ45 ports
■ 1 Quick Fix function on both sides to allow a simple, quick xing position
■ Panels equipped with 4 label holders and a metal tray cable manager
■ Metal sheet: thickness 0.047 in (1.2 mm). Dark grey RAL 7016
■ Plastic parts in PA66 GF20 or PA6
■ Simple clicking connectors for mounting and dismounting.
Evolution version: pre-equipped with 24 RJ45 S-110 keystone connectors (pre-mounted)
and a metal tray cable manager
Description Ref. No
Category 5e
Equipped panel 1U with 24 RJ45 S-110 connectors keystone
Cat 5e UTP
Category 6
Equipped panel 1U with 24 RJ45 S-110 connectors keystone
Cat 6 UTP
VDIG113241U50
VDIG113241U60
2
LSB03160EN 01/2018
Version : 1.1
37
Page 38
Accessories and guiding panels
The Actassi system also includes a range of panels and smart accessories
for improved cable management. The innovative patchcords guiding panel is
equipped with four openable rings, managing up to 48 cords.
P110145P110148 P133073P133071P110143 P110149
Brush and blank panel
Brush guiding panel. Blank panel instead of an
empty gap in the rack.
Guiding panels for patch cords
The 1U panel manages 24 cords, and 2U panel
48 cords. Easily opened but still safe, since a clever
device prevents cords from falling out. Also possible
to pull out only one cord if needed.
P133072
Side rings for rack 31.5 x 31.5 in (800 x 800 mm)
Rings for vertical management of up to 48 patch
cords, attached to each side of the guiding panel
(or any panel with Quick Fix). Available for 1U and 2U.
38
Vertical rings for rack 23.6 x 23.6 in
(600 x 600 mm)
For the 23.6 x 23.6 in racks, use the smaller tie up
devices to keep your installations in neat order.
Version : 1.1
P110615 P110464P110464
LSB03160EN01/2018
Page 39
Actassi Copper solution
P110148
Cable management
andaccessories
S-One, S-One DPM and S-110
Patch cord guiding panels
■ Patch cord guiding panel
■ 1U, 2U
■ 1 Quick Fix function on both sides to allow a simple, quick xing position
■ 4 openable rings
■ Patch cord holder integrated inside the ring for opened position.
P133071
P133073
P110149, P133072, P110143
Description Ref. No
Patch cord guiding panel 1U with 4 openable rings VDIG188141
Patch cord guiding panel 2U with 4 openable rings VDIG188142
Brush guiding panel
■ Patch cord guiding panel
■ 1U
■ 1 Quick Fix function on both sides to allow a simple, quick xing position.
Description Ref. No
Patch cord brush guiding panel 1U VDIG188201
Side rings for vertical management
■ Rings for vertical management of patch cords, in horizontal and vertical position
■ Openable
■ For racks 31.5 x 31.5 in (800 x 800 mm) and 23.6 x 23.6 in (600 x 600 mm)
■ Can be xed on each side of any Quick Fix system panel or guiding panel
■ Large capacity up to 48 cords.
Description Ref. No
Horizontal ring for vertical management of patch cords, 1U,
for rack 31.5 x 31.5 in (800 x 800 mm)
Vertical ring for vertical management of patch cords, 2U,
for rack 31.5 x 31.5 in (800 x 800 mm)
Ring for vertical management of patch cords, using self-grip strip,
for rack 23.6 x 23.6 in (600 x 600 mm)
VDIM189112
VDIM189412
VDIM189111
2
P110156
Rack shield kit
Description Ref. No
Rack shield kit, pack of 10 pcs VDIM48E011
LSB03160EN 01/2018
Version : 1.1
39
Page 40
40
Version : 1.1
LSB03160EN01/2018
Page 41
Actassi Copper solution
Index
A
ACT4P5EUCP1ARXGR ............................................................................................................30
ACT4P5EUCR1ARXGR ............................................................................................................30
ACT4P6UCP1ARXGR...............................................................................................................31
ACT4P6UCR1ARXGR ..............................................................................................................31
ACTPC6UBCM01ABU ..............................................................................................................33
ACTPC6UBCM01ARD ..............................................................................................................33
ACTPC6UBCM03ABU ..............................................................................................................33
ACTPC6UBCM03ARD ..............................................................................................................33
ACTPC6UBCM06ABU ..............................................................................................................33
ACTPC6UBCM06ARD ..............................................................................................................33
ACTPC6UBCM09ABU ..............................................................................................................33
ACTPC6UBCM09ARD ..............................................................................................................33
ACTPC6UBCM015ABU ............................................................................................................33
ACTPC6UBCM015ARD ............................................................................................................33
ACTPTG6ASBCM01ABU ..........................................................................................................34
ACTPTG6ASBCM01ARD..........................................................................................................34
ACTPTG6ASBCM03ABU ..........................................................................................................34
ACTPTG6ASBCM03ARD..........................................................................................................34
ACTPTG6ASBCM06ABU ..........................................................................................................34
ACTPTG6ASBCM06ARD..........................................................................................................34
ACTPTG6ASBCM09ABU ..........................................................................................................34
ACTPTG6ASBCM09ARD..........................................................................................................34
ACTPTG6ASBCM15ABU ..........................................................................................................34
ACTPTG6ASBCM15ARD..........................................................................................................34
ACTRJSM5ENSUBK ................................................................................................................25
ACTTG4P6ASCP1ARGR ..........................................................................................................32
ACTTG4P6ASCR1ARGR..........................................................................................................32
ACTTG4P6AUCP1ARGR..........................................................................................................32
ACTTG4P6AUCR1ARGR .........................................................................................................32
3
D
DXYTOOLPUNCH .....................................................................................................................26
V
VDIB1772XB12 .........................................................................................................................24
VDIB1772XU12 .........................................................................................................................24
VDIB17766UBK .........................................................................................................................25
VDIB17766UWE ........................................................................................................................25
VDIG112241F ............................................................................................................................36
VDIG112241U ...........................................................................................................................36
VDIG113241U50 .......................................................................................................................37
VDIG113241U60 .......................................................................................................................37
VDIG188141 ..............................................................................................................................39
VDIG188142 ..............................................................................................................................39
VDIG188201 ..............................................................................................................................39
VDIM48E011 .............................................................................................................................39
VDIM189111 ..............................................................................................................................39
VDIM189112 ..............................................................................................................................39
VDIM189412..............................................................................................................................39
LSB03160EN 01/2018
Version : 1.1
41
Page 42
Actassi Copper solution
Note
42
Version : 1.1
LSB03160EN01/2018
Page 43
4
LSB03160EN 01/2018
Version : 1.1
43
Page 44
01-2018
LSB03160EN
© 2018 - Schneider Electric. All Rights Reserved.
All trademarks are owned by Schneider Electric Industries SAS or its afliated companies.
This document has been
printed on recycled paper
Loading...