Schlage WCO100 Installation Manual

WCO100 Camera

WCO100 Camera MAC ID

Twelve(12)characters

Lens

PowerLED

PIRSensor

Microphone

_________________ (not used)

Lig h t

Sen s or

Pow e r

Por t

ResetButton

Antenna

MAC ID

Eth ern e t

Por t

Finalposition,

upright

Package Contents:

 Outdoor Camera
 External Antenna
 6-foot Power Adapter
 Swivel Connector
 Mounting Stand
 Mounting Base
 Mounting Screws (3)
 Ethernet Cable (with water sealing cap)
 6-foot Power Extension Cable (with water sealing cap)

1 Attachantenna to the camera

 Turn the antennaclockwise on the antenna mount.
 The antenna should be in anupright position for

best signal reception.

2 LocateMAC ID, Ethernet and Power.

Write the MAC ID in the box at thetop of this page for later reference.

DO NOT plug in Ethernet or power before enrolling!

3 Logintoyouraccount atwww.mynexia.com

Camera can be used only with Nexia Home Intelligence system.
Account must be active before continuing. See nexiahome.com for more information.

4

EnrolltheCamera

a. Make sure Ethernet and power are NOT plugged into camera before you begin.
b. On www.mynexia.com,click the Cameras tab.
c. ClicktheAdd Camera button.
d. Follow the on-screeninstructions.
e. Click on Edit Camera Settings to complete wireless setup.