Schlage S-6000 User Manual

S-6000

L

DIGITAL TOUCHPAD

IGITA

DOOR LOCK

USER MANUAL

Product Features

Three Way Access Solution

Three entry options: PIN code and smart card/fob. The unit also has
a key override feature.

Random Security Code Function

You may press any numbers randomly without limitation, and then
enter your PIN code as the fi nal sequence. This feature allows
access without revealing your PIN code to others.

Panic Release Handle Type

This feature facilitates quick exits, opening the door easily with a
simple lever action.

Highly Reliable Lock Type

The S-6000 features a reliable mechanical mortice lock.

Auto lock/Auto re-lock function

When the door is closed, the lock engages automatically. If users
do not open the door after unlocking it, the lock will re-engage
automatically.

Privacy function

When privacy function is activated, the door cannot be opened
from outside, even with the registered card/fob or entry code.

Excessive force alarm

If excessive force is used to try to bypass the lock, the lock function
is supended and an alarm will sound.

Preventing illegal entry and hacking

If an incorrect entry code is used 5 times, the door lock function is
suspended and an alarm will sound.

Battery level indicator

Replace batteries when low battery indicator light shows and alarm
sounds.

Safety Precautions

Do not disassemble or alter the lock. Disassembling the door
lock may damage the product. Damage to the product caused by
unauthorised persons may void the warranty.

Please keep the product away from water or any liquids. If the
product is exposed to water or liquids, please wipe the moisture
off with a soft cloth. If moisture or foreign materials penetrate the
product, remove the batteries immediately.

Please check the batteries every 6 months for leaks/cleanliness. If
leakage is discovered, please wipe out with a dry cloth and replace
with new batteries. In case of exposure to leakage, wash affected
skin area with soap and water immediately.

Do not clean the product with fl ammable materials such as alcohol,
benzene or thinners. Such materials may damage the surface of the
lock or cause a fi re.

Batteries should not be exposed directly to heat sources or
submerged in water, because they may leak or explode, resulting in
severe damage. Do not use damaged batteries.

Do not allow the battery electrodes to make contact with metals
such as keys, as the battery may overheat, causing an explosion or
severe damage.

Please do not close the door with the deadbolt in the locked
position. It may damage the product or cause a malfunction.

Do not mix old and new batteries, or use different types of
batteries. Ensure the + and - ends of the batteries are positioned
correctly. Incorrect positioning may cause leaks and/or an explosion.

User Manual Index

Introduction & Basic Functions

Product components 4
Front of lock 5
Back of lock 6
Checking battery status 7
Replacing batteries 7
Emergency power 8
Manual override 8
Random security coding 9
Auto/manual locking system 9
Opening door from outside 10
Locking door from outside 11
Opening/Locking Door
From the Inside 12

Applications

Privacy function 13
Auto locking function 14
Auto-relocking function 14
Alarm & warning functions 15
System reset 16
Setting volume level 17

Registering entry PINs 18
Registering cards/fobs 19
Deleting entry PINs 19
Registering Remote Key 20

Product Components

1. 2. 4.3.

5.

6.

7. 8 .

10.

9.

11.

14.

13.

Name Specifi cation/Detail

Front assembly 76mm (W) x306mm (H) x28mm (D)

1.
Back assembly 71mm (W) x298.6mm (H) x30.7mm (D)

2.
Back cover 76mm (W) x303.6mm (H) x7.9mm (D)

3.
Mortice Lock 123mm (W) x 109.5mm (H) x 24.5mm (D)

4.
Strike plate 36mm (W) x 106mm (H) x 1.5mm (D)

5.
Strike housing 24mm (W) x 102mm (H) x 18mm (D)

6.
Card/fob 2x card, 2x fob, 2x patch

7.
Key 3x

8.
User manual Includes warranty form

9.
Installation template For door preparation

10.
Batteries 8 pieces (1.5v, AA, LR6 alkaline)

11.
Handle shaft (40-50mm thick door) 89(W) X 12(H) X 12(D)mm + stop-ring

12.
Handle shaft (50-90mm thick door) 126.9(W) X 12(H) X 12(D)mm + stop-ring

13.
Screws 5 x 30mm - 4 of each for back cover

14.
5 x 24mm - 2 of each for inner lower part
5 x 8mm - 2 of each for inner upper part
3/16” x 1/2” - 4ea. for mortice and strike
4 x 19mm - 4ea. for front/back plate

12.

4.

Front of Lock

Battery replacement indicator

- replace batteries when this
lamp begins to fl icker

Card/fob touch plate

Touch type numeric pad

- enter PIN to operate lock

External power supply

5.

Door handle

Mechanical key override

Back of Lock

Battery cover

10 key button

- registration of PIN codes

LED indicator (locking status)

- fl ickering (locked correctly)

- fl ickering with alarm sound
(abnormal locking status)

Manual locking button

- locks the door manually in
manual locking mode

Fixing screw

Batteries

- 8 pieces

- 1.5v, AA, LR6 alkaline

R/C button

- registration of card/fob

Low voltage indicator

- when the lamp fl ickers
and alarm sounds batteries
should be replaced

Privacy switch

- to set privacy mode

Door handle

- panic release type

- can be used at any time

6.

Battery Status & Replacement

Check battery status (door must be closed)

Touch front pad
to illuminate
screen

Battery replacement

Press 1

Press #

Battery Status

- GoodGreen

Orange

- Low

Red - Replace

Immediately

If battery lamp is
fl ickering and alarm
sounding

NOTE

• The life of batteries is around one year, based on ten entries/exits per day.

• Battery life can vary depending on battery’s manufacturer, production date,
installation environment and usage frequency.

• Second hand batteries and/or the use of batteries other than those specifi ed is
likely to cause a malfunction.

• Do not use rechargeable batteries as battery leakage may occur.

• Check batteries at least every 6 months and if there is any leakage, replace with
new batteries.

Push battery cover
gently upwards
to access battery
compartment

Replace old batteries
with brand new 1.5v,
AA, LR6 alkaline
batteries

7.