Page 1
Art.Nr.
59093049947
AusgabeNr.
5909304851
Rev.Nr.
03/05/2019
TW1000
GB
Workshop trolley
Translation from the original instruction manual
Nachdrucke, auch auszugsweise, bedürfen der Genehmigung. Technische Änderungen vorbehalten. Abbildungen beispielhaft!
www.scheppach.com service@scheppach.com +(49)-08223-4002-99 +(49)-08223-4002-58
Page 2
1
1
2
3
5
4
2
45
3
3
5
3
5
4
2
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
Page 3
Explanation of the symbols on the equipment
GB
Read the operating instructions to reduce the risk of injury
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
3
Page 4
Table of contents: Page:
1. Introduction
2. Layout 5
3. Scope of delivery 5
4. Intended use 5
5. Safety information 6
6. Technical data 6
7. Before starting the equipment 6
8. Attachment and operation 7
9. Cleaning and storage 7
10. Disposal and recycling 7
4 | GB
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
Page 5
1. Introduction
2. Layout
MANUFACTURER:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
DEAR CUSTOMER,
We hope your new tool brings you much enjoyment
and success.
NOTE:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by
the product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specied.
WE RECOMMEND:
Read through the complete text in the operating instructions before installing and commissioning the
device. The operating instructions are intended to
help the user to become familiar with the device and
take advantage of its application possibilities in accordance with the recommendations. The operating
instructions contain important information on how to
operate the device safely, professionally and economically, how to avoid danger, costly repairs, reduce
downtimes and how to increase reliability and service
life of the device.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regulations that apply for the operation of the device in
your country. Keep the operating instructions package with the device at all times and store it in a plastic
cover to protect it from dirt and moisture. Read the
instruction manual each time before operating the device and carefully follow its information.
1. Handle
2. Key
3. Castor
4. Castor with brake
5. Fixed wheel
3. Scope of delivery
• Workshop trolley
• Castor
• Castor with brake
• Fixed wheels
• Fastening screws
• Key
• Operating Manual
4. Intended use
The trolley is designed solely for the storing of tools
with a maximum load of 450 kg. It is solely intended
for private use indoors and is not suitable for commercial applications.
Only use the trolley as described in this operating
manual. Any other use is considered unintended use
and can lead to damage or even injury. The trolley is
not a toy.
The manufacturer or dealer assumes no liability for
damage caused by unintended or improper use.
Please note that our equipment has not been designed
for use in commercial, trade or industrial applications.
Our warranty will be voided if the equipment is used in
commercial, trade or industrial businesses or for equivalent purposes.
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB | 5
Page 6
5. Safety information
6. Technical data
Risk of injury!
Improper use of the trolley increases the risk of injury.
• Always check the trolley before use. Do not use the
trolley if it is damaged.
• Only move the trolley by pushing it to another location. To avoid injury, do not pull the trolley
• Always ensure the universal machine stand is secure when setting it up.
• Do not climb or stand on the trolley.
• Close and lock all of the drawers before pushing
the trolley. Otherwise, the drawers could open while
pushing so that the trolley becomes unstable.
• Do not overload the drawers of the trolley.
• Keep the trolley away from children. Do not leave the
trolley unattended in the vicinity of children.
• Keep children away whilst assembling the trolley.
This product includes screws and other small parts.
These could cause asphyxiation if they are swallowed or inhaled.
• The trolley is very heavy when fully loaded. There is
a risk of tipping in the event of improper opening. Do
not open multiple drawers at the same time.
• Do not assemble the trolley on a moveable object to
avoid tipping.
• Warning: Only position and operate on a solid, level
surface. The trolley can become unstable and tip
over if it is kept or pushed on a sloping surface.
• Always block the rotatable castors after the trolley
has been pushed to the desired location to prevent
the trolley from rolling away.
• Do not make any changes to the trolley. For example, do not weld any external bars and do not attach
any electrical devices to the trolley.
• Do not attach or mount the trolley to a vehicle. Do
not pull the trolley with a vehicle.
• Only use original spare parts and accessories.
Tot a l 780 x 460 x 970 mm
Small drawers
Payload
Medium drawers
Payload
Large drawers
Payload
Weight 55 kg
Max. payload 450 kg
533 x 58 x 391 mm
15 kg
533 x 128 x 391 mm
20 kg
533 x 195 x 391 mm
20 kg
7. Before starting the equipment
Check the device for transport damage. Immediately
report any damage to the transport company that delivered the device.
• Open the packaging and remove the device carefully.
• Remove the packaging material as well as the
packaging and transport bracing (if available).
• Check that the delivery is complete.
• Check the device and accessory parts for transport
damage.
• If possible, store the packaging until the warranty
period has expired.
ATTE NTI O N
The device and packaging materials are not toys!
Children must not be allowed to play with plas-
tic bags, lm and small parts! There is a risk of
swallowing and suffocation!
Store these safety instructions safely.
Observe all safety instructions. If you disregard the
safety instructions, you endanger yourself and others.
6 | GB
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
Page 7
8. Attachment and operation
2. Storage
The workshop trolley is largely assembled and you
need only t the wheels as follows:
Mounting the wheels (g. 1-3)
• First, remove the tools provided from the trolley.
• Mount the trolley on a sufciently large and
scratch-proof surface. If necessary, pad the trolley
with packaging material to prevent scratching of the
painted surfaces.
• Turn the workshop trolley over and mount the
wheels as follows.
• Position the xed castors (5) at the rear and the
rotatable castors (3,4) at the front (handle side (1))
of the trolley. Line up the holes in the castors with
the holes in the trolley.
• Attach the castors to the underside of the trolley
using an Allen key. Only use the screws provided
for this.
9. Cleaning and storage
1. Cleaning
Risk of damage!
If the trolley is not cleaned properly it may become
damaged.
• Do not use an aggressive, abrasive cleaning agent
and do not use a solvent, acid or chlorine based
cleaning agent.
• Do not use brushes with metallic or nylon bristles
and do not use sharp or metallic cleaning utensils
such as blades, hard spatulas or similar.
• Use a mild cleaning agent to clean the trolley and a
soft, clean towel. Allow the trolley to dry completely
after cleaning.
• Remove lubricant and oil with a non-ammable
cleaning agent.
m Attention!
Rust could form if the trolley is stored in a damp location. The functionality or carrying capacity of the trolley could therefore be permanently and irreparably
impaired.
• Protect the trolley from moisture, direct sunlight
and frost.
• Store the trolley in a dry location.
• Keep the trolley away from children
10. Disposal and recycling
The equipment is supplied in packaging to prevent it
from being damaged in transit. The raw materials in
this packaging can be reused or recycled. The equipment and its accessories are made of various types
of material, such as metal and plastic. Defective components must be disposed of as special waste. Ask
your dealer or your local council.
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB | 7
Page 8
Garantie DE
Offensichtliche Mängel sind innerhalb von 8 Tagen nach Erhalt der Ware anzuzeigen,
andernfalls verliert der Käufer sämtliche Ansprüche wegen solcher Mängel. Wir leisten
Garantie für unsere Maschinen bei richtiger Behandlung auf die Dauer der gesetzlichen
Gewährleistungsfrist ab Übergabe in der Weise, dass wir jedes Maschinenteil, dass
innerhalb dieser Zeit nachweisbar in Folge Material- oder Fertigungsfehler unbrauchbar werden sollte, kostenlos ersetzen. Für Teile, die wir nicht selbst herstellen, leisten
Apparent defects must be notied within 8 days from the receipt of the goods. Otherwise,
the buyerís rights of claim due to such defects are invalidated. We guarantee for our
machines in case of proper treatment for the time of the statutory warranty period from
delivery in such a way that we replace any machine part free of charge which provably
becomes unusable due to faulty material or defects of fabrication within such period of
Les défauts visibles doivent être signalés au plus tard 8 jours après la réception de la
marchandise, sans quoi l’acheteur perd tout droit au dédommagement. Nous garantissons nos machines, dans la mesure où elles sont utilisées de façon conforme, pendant
la durée légale de garantie à compter de la réception, sachant que nous remplaçons
gratuitement toute pièce de la machine devenue inutilisable du fait d’un défaut de matière
ou d’usinage durant cette période. Toutes les pièces que nous ne fabriquons pas nous-
Zjavné nedostatky treba oznámiť v priebehu 8 dní od príjmu tovaru, v opačnom prípade
stráca kupujúci všetky nároky kvôli takýmto nedostatkom. Záruku na naše stroje pri
správnom zaobchádzaní poskytujeme na dobu zákonnej záruč nej lehot y od odovzdania
tým spôsobom, že ka ždú časť stroja, ktorá by sa v priebehu tohto času stala dokázateľne
nepoužiteľnou následkom chýb materiálu alebo výrobných chýb, bezplatne vymeníme.
Német garancia HU
A nyilvánvaló hiányokat az áru átvétele után 8 napon belül be kell jelenteni. Egyéb ese-
tekben a vevő az ilyen hiányokkal kapcsolatos összes igényét elveszíti. Helyes használat
esetén gépeinkre az átadástól a törvényileg szabályozott jótállás időtartama alatt garan-
ciát biztosítunk oly módon, hogy díjmentesen kicserélünk minden olyan alkatrészt, amely
ezen idő alatt bizonyíthatóan anyaghiba vagy gyártási hiba miatt vált használhatatlanná.
Vizi evidenti vanno segnalati entro 8 giorni dalla ricezione della merce altrimenti decadono tutti i diritti dellíacquirente inerenti a vizi del genere. Appurato un impiego corretto
da parte dellíacquirente, garantiamo per le nostre macchine per tutto il periodo legale
di garanzia a decorrere dalla consegna in maniera tale che sostituiamo gratuitamente
qualsiasi componente che entro tale periodo presenti dei vizi di materiale o di fabbrica-
Očitne pomanjkljivosti morate naznaniti v roku 8 dni po prejemu blaga, v nasprotnem kupec izgubi vse pravice v primeru t akih pomanjkljivosti. Garancijo za naše stroje jamčimo
pri pravilnem ravnanju v trajanju zakonskega roka veljavnosti garancije ob predaji na tak
način, da vsak del stroja, ki postane v tem času dokazljivo neuporabben zaradi napak v
Viditelné vady jsou poukazatelné během 8 dní od obdržení zboží, jinak ztrácí zákazník
všechny nároky týkající se takovýchto vad. Poskytujeme záruku na naše stroje, s kterými
je správně zacházeno, na dobu zákonnné záruční lhůty začínající od doručení tak, že
bezplatně vyměníme každou část stroje, která se během této doby může stát prokazatelně
nepoužitelnou následkem materiálové či výrobní vady. Na díly, které sami neopravujeme,
wir nur insoweit Gewähr, als uns Gewährleistungsansprüche gegen die Vorlieferanten
zustehen. Die Kosten für das Einsetzen der neuen Teile trägt der Käufer. Wandlungs- und
Minderungsansprüche und sonstige Schadensersatzansprüche sind ausgeschlossen.
Das Sägeblatt ist ein Verschleißteil und von jeglichen Garantieansprüchen grundsätzlich
ebenfalls ausgeschlossen.
Warranty GB
time. With respect to parts not manufactured by us we only warrant insofar as we are
entitled to warranty claims against the upstream suppliers. The costs for the installation
of the new parts shall be borne by the buyer. The cancellation of sale or the reduction of
purchase price as well as any other claims for damages shall be excluded. The saw blade
is a consumable item and explicitly excluded from any warranty.
Garantie FR
mêmes ne sont garanties que si nous avons la possibilité d’un recours en garantie auprès
des fournisseurs respectifs. Les frais de main d’œuvre occasionnés par le remplacement
des pièces sont à la charge de l’acquéreur. Tous droits à rédhibition et toutes prétentions
à une remise ainsi que tous autres droits à dommages et intérêts sont exclus. La lame est
une pièce d’usure et est exclue de la garantie.
Záruka SK
Na diely, ktoré sami nevyrábame, poskytujeme záruku iba do takej miery, do akej nám
prináležia nárok y na záručné plnenie voči subdodávateľom. Náklady za vloženie nov ých
dielov nesie kupujúci. Nároky na výmenu tovaru a nárok y na zníženie c eny a ostatné
nároky na odškodnenie sú vylúčené. Pílový kotúč je spotrebný diel a zásadne je taktiež
vylúč ený z akýchkoľvek záručných nárokov.
A nem saját gyártású alkatrészekért csak abban az esetben vállalunk garanciát, ha
beszállítónk felé jótállási igényt támaszthatunk. Az új alkatrészek alkalmazásának költségei a vevőt terhelik. Az átalakítási és árleszállítási igények, valamint egyéb kártérítési
igények ki vannak zárva. A fűrészlap kopó alkatrésznek számít, ezér t alapvetően minden
garanciaigény alól ki van zárva.
Garanzia IT
zione tali da renderlo inutilizzabile. Per componenti non fabbricati da noi garantiamo solo
nella misura nella quale noi stessi possiamo rivendicare diritti a garanzia nei confronti dei
nostri fornitori. Le spese per il montaggio dei componenti nuovi sono a carico dellíacquirente. Sono escluse pretese di risoluzione per vizi, di riduzione o ulteriori pretese di
risarcimento danni.
Garancija SI
materialu ali izdelavi, zamenjamo brezplačno. Za dele, ki jih ne izdelujemo sami, jamčimo
samo v tolikšni meri, kolikor nam dopušča naš a pravica do dobaviteljev. Stroške vstavljanja novih delov nosi kupec. Zahtevki za zamenjavo in znižanje cene niso sprejemljivi. List
žage je obrabni del in tako tudi v celoti izključen iz vsakega garacijskega zahtevka.
Záruka CZ
poskytujeme záruku pouze v rozsahu , v němž nám přísluší nárok na záruční plnění vůči
subdodavateli . Náklady na instalaci nového dílu nese zákazník. Nárok na výměnu zboží,
na slevu a jiné nároky na odškodnění jsou vyloučené.
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
Loading...