SANYO VPC-C40EX, VPC-C40E, VPC-C40, VPC-C40GX SERVICE MANUAL

SERVICE MANUAL

FILE NO.

Digital Movie Camera

Contents

1. OUTLINE OF CIRCUIT DESCRIPTION .................... 3

2. DISASSEMBLY ........................................................ 11

3. ELECTRICAL ADJUSTMENT .................................. 15

4. USB STORAGE INFORMATION

REGISTRATION ...................................................... 21

5. TROUBLESHOOTING GUIDE................................. 22

6. PARTS LIST............................................................. 23

ELECTRICAL PARTS .............................................. 23

ACCESSORIES ....................................................... 28

PACKING MATERIALS............................................ 28

CABINET & CHASSIS PARTS 1 ............................. 30

CABINET & CHASSIS PARTS 2 ............................. 32

CIRCUIT DIAGRAMS &

PRINTED WIRING BOARDS ...................................... C1

VPC-C40

(Product Code : 168 033 01)
(U.S.A.)
(Canada)
(Korea)
(Taiwan)

VPC-C40EX

(Product Code : 168 033 02)
(Europe)
(South America)
(China)
(Australia)
(Hong Kong)
(Russia)
(Middle East)
(Africa)
(General)

VPC-C40E

(Product Code : 168 033 03)
(U.K.)

VPC-C40GX

(Product Code : 168 033 04)
(General)

WARNING

This product has been manufactured using lead-free solder. Be sure to follow the warning given on page 2 when carrrying out
repair work.

PRODUCT SAFETY NOTICE

The components designated by a symbol ( ! ) in this schematic diagram designates components whose value are of

special significance to product safety. Should any component designated by a symbol need to be replaced, use only the part

designated in the Parts List. Do not deviate from the resistance, wattage, and voltage ratings shown.

CAUTION : Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the manufacturer.
Discard used batteries according to the manufacturer’s instructions.

NOTE : 1. Parts order must contain model number, part number, and description.

2. Substitute parts may be supplied as the service parts.

3. N. S. P. : Not available as service parts.

Design and specification are subject to change without notice.

SX814/U, EX, E, GX

REFERENCE No. SM5310644