Sanyo VCC-XZN600P, VCC-XZ600P, VCC-ZMN600P, VCC-ZM600P User Manual

1/4” Color CCD High-Resolution
VCC-ZM600P
PAL
Day/Night AF Zoom Cameras
• 30x optical zoom and 16x digital zoom
• Super-high resolution of 540 TV lines (typical)
• High sensitivity & minimum illumination of 0.016 lx at 20 IRE,
0.04 lx at 50 IRE (F1.4, B/W mode)
• Image stabilizer
• Built-in UTP video transmission connectivity
• Simultaneous dual video streaming of H.264 and JPEG over a network
(VCC-ZMN600P and VCC-XZN600P)
VCC-XZ600P VCC-ZMN600P VCC-XZN600P
VCC-XZN600P
PAL
PAL
PAL
VCC-ZMN600P
1/4” Color CCD DSP High-Resolution Weatherproof Day/Night AF Zoom Camera
VCC-XZ600P VCC-XZN600P
(IP Camera)
Maximum
480x Zoom
The 30x optical zoom and 16x digital zoom can be com­bined for a close-up of 480x. This allows even distant subjects to be checked in detail, allowing one camera to monitor a wide area.
High Resolution of
540 TV Lines (typical)
SANYO has improved the horizontal resolution to 540 TV lines (typical) by developing the full capability of CCD and using an IR cut filter with enhanced performance. The result is better picture quality, which even a conven­tional high-resolution camera cannot match.
Adjustable Arm (VCC-XZ600P / VCC-XZN600P)
The angle of the arm is adjustable in all directions. Since the flexible joint is secured by screws, the arm maintains its po­sition without sagging over time. In addi­tion, a safety wire is included to prevent accidents. Installation on a ceiling or wall is easy without any additional parts. The wires are securely protected inside the arm.
IP66 Compliant Enclosure
(VCC-XZ600P / VCC-XZN600P)
The protective housing meets IP66 standards for water and dust resistance.
Integrated flexible arm
Image Stabilizer
Image blurring due to camera vibrations that occur because of strong winds or the passing of large trucks can be elec­tronically eliminated.
Without image stabilizer With image stabilizer
Registering a view setting file (CAMERA VIEW)
To support shooting in various surveillance conditions like when the surveillance location is bright (or dark), the CAM­ERA VIEW screen allows you to register up to 2 patterns of shooting settings as camera view setting files. Of course, camera view switching in connection with exter­nal alarms or motion sensors and day/night mode setting switching is also possible.
1/4” Color CCD DSP High-Resolution Day/Night AF Zoom Camera
VCC-ZM600P
Intelligent switching from Color to B/W
Selecting Color or B/W mode can be done automatically by the camera, or else manually. In addition, the user is al­lowed to change the switchover point from 1 to 10 lx (nomi­nal) using the on-screen menu. The integration of Color and high-sensitivity B/W modes in one camera makes it a versa­tile tool for any surveillance need. It is truly an all-in-one camera.
32X Sensitivity Boost for Minimum Illumination of 0.00125 Lx
While achieving 0.04 lx minimum subject illumination at maximum gain, sensitivity can be further heightened to 32X for 0.00125 lx minimum illumination when the sensitivity boost function is activated at 50 IRE (F1.4). [B/W mode],
0.0005 lx minimum illumination when the sensitivity boost function is activated at 20 IRE (F1.4). [B/W mode]
Built-in Intelligent Digital Motion Detector and Zoom Detector
The Intelligent Digital Motion Detector enables reliable and accurate motion detection by analyzing the “magnitude of movement” and the “size of object” from changes in pic­ture brightness. When a moving object is detected, VCC­ZM600P / VCC-ZMN600P / VCC-XZ600P / VCC-XZN600P can send an alarm signal to external units and/or automati­cally switch to the optical zoom mode, according to the user's preference. Furthermore, an external alarm input ter­minal makes it possible, when an alarm signal is received, to automatically zoom in to the site of activity, according to a preset zooming operation.
VCC-ZMN600P
3 Methods of Intelligent Backlight Compensation
The VCC-ZM600P / VCC-ZMN600P and VCC-XZ600P / VCC­XZN600P feature three selectable backlight compensation modes: multi-spot metering (applied to the whole screen), center-zone meter­ing (applied to the central portion only) and multi-spot masking.
Multi-spot metering measures luminous intensity in 48 areas on screen to enable optimal backlight compensation even for peripheral and moving objects.
13 Electronic Shutter Speed Modes
Thirteen electronic shutter speed modes (1/1.5, 1/3, 1/6, 1/12, 1/25, 1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000 and 1/10,000 of a second) are selectable in response to brightness and movement at the monitoring point.
Operation Buttons
Use buttons provided on the side face of the camera to manually focus and zoom live images being monitored. These buttons are also used to set menu options when the menu screen is displayed.
Camera Control Unit VAC-70 (sold separately)
Connection of the VAC-70 control unit allows adjustment of zoom/focus and set­up directly from an on-screen menu.
Camera
Video coaxial cable
1
2
(IP Camera)
Operations during live monitoring
1
Set the focus
2
Zoom out/into (Magnification: x1 to x30)
3
Auto focus operation
Operations on the menu screen
1
Menu select
3
2
Adjust or choose the value for the selected item
3
Set the value you adjusted or chose for the selected item, or switch to the sub-menu
Privacy Masking
When there is a house or even an object as small as a win­dow within the camera frame, it is possible to mask the area so that it will not appear on the monitor screen to pro­tect other people’s privacy. Up to 4 rectangular masks of ar­bitrary size can be set per screen. These masked areas may be protected with passwords (maximum four digits).
MonitorVAC-70
Built-in Communication Board
(VCC-ZM600P and VCC-XZ600P only)
SSP + Twisted pair board
Communication protocol: Coaxial control: SSP / H-SSP / PELCO-C RS485: SSP / H-SSP / PELCO-D Twisted pair terminal (CAT 5) for video signal: NVT built-in UTP video
Other useful features
• Adjustable gamma correction and aperture settings
• Display of assignable camera ID and titles (16 characters max.)
• Mirror function
IP Camera Solution
A Full Featured Camera with a Built-in Network Interface
A network camera is a system that allows the user to view the image captured by a camera on a network-connected PC. The advantage of using this type of camera is its low cost in system implementation. The camera is suitable for remote surveillance systems, distribution of live video, and other security systems and supports JPEG/H.264. Its ability to transmit stable video over a network makes it an ideal choice for remote surveillance. Images monitored over a network can be checked using a general-purpose web browser (Internet Explorer)*
*1 ActiveX installation is required. *2 See page at right for details.
Transmission using 2 types of codecs (H.264 and JPEG) is possible.
For video compression, H.264, optimized for transmission of moving images over a network with low bit transfer rates, is used to enable real-time high-image-quality monitoring, and for still images JPEG is used to offer high­image-quality in a common image format. Monitoring can be performed according to the user's application, so that any important scene is not missed.
1
or Network Monitoring Software VA-SW3050 series*2.
VCC-9800P series
+ VA-80LAN
VCC-9800P series
+ VA-82LAN
H.264 / JPEG compatible
Use of a PC for Monitoring
By simply using a standard web browser, like Internet Explorer, on a personal computer, the user has access to the full color video image from the camera. In addition, a camera with a zooming function makes it possible to zoom in to a particular location of concern. The 30x optical zoom function of the 600 series makes it possible to obtain a clear picture, even in the zoom-in mode. Recording the JPEG image on a PC is also possible by the use of VA­SW3050S (for server) software.
Network
PC
Power-over-Ethernet (PoE)
Both VCC-ZMN600P and VCC-XZN600P support the IEEE
802.3af standard for Power-over-Ethernet (PoE) applications to allow power to be supplied over LAN cabling. In addition to making installation easier, this allows camera installation in places where it would otherwise be difficult to secure a power source.
PoE Supported Switching Hub
Network
DDNS (Dynamic Domain Name System) Service compatible
The VCC-ZMN600P and VCC-XZN600P can be accessed with a fixed host name (e.g. sanyovcczmn600p), which makes the network easy to remember, always available, and secure.
VCC-XZ200P
+ VA-20LAN
JPEG compatible
VDC-DPN9584P VCC-PN9574P
IP Camera Lineup
E-mail function
A setting for automatic sending of mail (up to 5 addresses can be set) is provided. By using this setting, an alarm notification e-mail can be set when an alarm is detected. Or, e-mails can be sent at regular intervals. In either case, an image can be attached to the e-mail.
Schedule setting
Timer sending or alarm notification can be performed during a specified time period. The following 5 functions are provided: TIMER (SMTP) for timer sending of e-mail, TIMER (FTP) for timer sending of images via FTP mode, ALARM (SMTP) for e-mail notification of an alarm, ALARM (FTP) for sending of alarm images via FTP mode, and REMOTE ALARM "ACTIVE" for enabling camera alarm output 2 by remote operation.
VCC-XZN600P
VDC-DP7584P
+ VA-50LAN or VA-51LAN
VCC-ZMN600P
VCC-P7575PA
+ VA-50LAN or VA-51LAN
Network recording software (sold separately) VA-SW3050S
(for server)
/ VA-SW3050C
The VCC-ZMN600P and the VCC-XZN600P are bundled with VA-SW3050LITE viewer software allowing live video streams sent from cameras to be monitored on a PC. The network recording software VA-SW3050S / VA-SW3050C (sold separately) is an application program that extends the network operation of the camera. By installing this software, it is possible to monitor images from multiple cameras on a split screen and access and operate up to 128 cameras over a network. VA-SW3050S further offers the convenience of recording live images and alarm/timer functions. It is an exclusive software package for CCD cameras.
(for client)
Client
Server
Max.10
Client
Live images from a single camera can be viewed on a PC using Internet Explorer*. To view live images from multiple cameras, install the included VA-SW3050LITE viewer software.
* ActiveX installation is required.
H.264 plug-in installation is required.
Main window (HTML)
16-screen display (VA-SW3050LITE / VA-SW3050C)
Operation Panel
The operaton panel can be used to remotely operate a camera. Some operations can also be performed with a mouse.
Ex.) Zoom magnification can be changed by operating the mouse wheel.
Operation panel for speed dome cameras
• Access to up to 128 cameras.
• Up to ten client users can be registered for each server computer, and the operational authorization level can be set differently for each camera.
• There are a variety of other optional functions to facilitate monitoring operation (VA-SW3050LITE/VA-SW3050C).
• Can split the display into one, four or sixteen screens (VA-SW3050LITE/VA-SW3050C).
• Image searching function can search through recorded images for a playback (VA-SW3050C).
• Images on the monitoring display can be printed and saved (VA-SW3050C).
• Can change camera settings, and control cameras remotely (VA-SW3050LITE/VA-SW3050C).
• Recording can be set to start automatically by timer or by alarm. (VA-SW3050S)
VA-SW3050LITE
(Bundled)/VA-SW3050S/VA-SW3050C
Feature Comparison
Bundled Sold separately
Number of cameras supported
Search camera
Live monitor
Camera Control
Video recording
Playback
Video search
Backup
Download
Print
PTZ, etc.
Menu
VA-SW3050LITE
LITE
VA-SW3050S
VA-SW3050C
Server
Max. 128Max. 128 Max. 128
Client
VA-SW3050LITE (Bundled)/VA-SW3050S/VA-SW3050C System Requirements
PC
OS
CPU/Memory
Network interface
Display card
Recom­mended graphics chip
Voice
Component
IBM PC/AT and compatibles
Windows® XP Professional SP2, Windows® Vista
Windows® 2003 Server SP2 (VA-SW3050S only)
When the number of cameras connected is 4 or fewer:
CPU: Pentium
When the number of cameras connected is 16 or fewer:
*CPU: Pentium
MEMO
When you record live videos from 17 or more cameras simultaneous­ly on a single PC, recording operation may fail depending on your monitoring system configuration. When the recording operation fails, add PCs used for recording so that the number of cameras to record simultaneously per PC becomes 16 or fewer.
100Base-TX
1024 x 768 pixels or higher, 16 million colors or higher AGP graphics card supporting hardware overlay Or PCI Express graphics card (Requires the latest DirectX
ATI
RADEON X1000 series or higher
nVIDIA
GeForce 6000 series or higher, Quadro4 series or higher
Matrox
Millenn d speakers with 100% DirectX® compatibility
Sound card and speakers with 100% DirectX® compatibility
DirectX® 9.0c
®
4, 3.0 GHz or higher, Memory: 1 GB or more
®
4, 3.4 GHz or higher, Memory: 2 GB or more
®
9.0c compatible driver.)
Specifications
Model No.
Scanning system
Image sensor
Picture elements
Horizontal resolution
Minimum illumination (approx.)
20IRE
Electronic sensitivity boost
Video output level
Video S/N ratio
Backlight compensation
Day/Night
White balance
Gain control
Motion detector
Privacy masking
Electronic shutter
Lens
Synchronizing system
Aperture Horizontal
Vertical
Diagonal
V phase adjustment
Optical zoom
Electronic zoom
Communication method
Alarm input
Alarm output
Mirroring function
Environmental conditions
Power requirement
Power consumption (approx.)
Dimensions (approx.)
Weight (approx.)
VCC-ZM600P / VCC-ZMN600P VCC-XZ600P / VCC-XZN600P
PAL standard 625 lines, 50 fields/sec.
1/4" (approx. 3.6 mm x 2.7 mm) interline transfer method CCD
Total: 795(H) x 596(V), Effective: 752(H) x 582(V)
540 TV lines (Typical)
0.8 lx (at F1.4, GAIN: HIGH, color mode), 0.04 lx (at F1.4, GAIN: HIGH, B/W mode)
50IRE
0.32 lx (at F1.4, GAIN: HIGH, color mode), 0.016 lx (at F1.4, GAIN: HIGH, B/W mode)
AUTO (interlocked with auto iris), up to 32x / OFF
1.0 V (p-p) (75 , composite)
More than 50 dB (AGC OFF)
ON / OFF, ON = Multi-spot metering / Centre-zone metering / Multi-spot masking Auto / Color / BW settings (3-level adjustment)
Color / BW switching function (color mode) and burst off/on setting function (B/W mode) can be used via alarm input
ATW / AWC / Manual / Outdoor / Indoor / Fluorescent / R/B adjustment possible when using MWB
ON (Low / Normal / Middle / High) / OFF (Gain adjustment possible)
ON (individual setting possible) / OFF, Motion zoom function (individual setting possible)
ON / OFF, max. of 4 masked locations (Wide view screen)
High-speed mode:1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 sec. Low-speed mode: 1/25, 1/12, 1/6, 1/3, 1/1.5
f = 3.5 to 105mm F1.4 to 3.7 auto focus
Internal sync. / Line lock
56 to 2.0°
43 to 1.5°
68 to 2.5°
LINE PHASE
30x
16x
System connection terminals (RS485/Coaxial)*, UTP (NVT built-in)*, support of camera control unit (VAC-70))
External inputs: 2, NO / NC switch, Day/night switch
External outputs: 1, NO / NC switch, open corrector
OFF / HV / H / V
Temperature: -10°C to 50°C [+14°F to 122°F], Humidity: within 35 to 90% RH
24 V AC ± 10%, 50 Hz or 12 V to 15 V DC
4.9 W (ZM600P) / 7.3 W (ZMN600P)
56(W) x 64(H) x 150(D) mm
2.2(W) x 2.5(H) x 5.9(D) in.
540 g (19.0 oz.) (ZM600P) 600 g (21.2 oz.) (ZMN600P)
Network Specifications
Model No. VCC-ZMN600P / VCC-XZN600P
Image compression
Resolution H.264
Picture quality
Frame rate H.264
Bandwidth
Alarm buffer
Interface
Protocols
Simultaneous access capacity
Security
System requirements
Accessories
H.264 / JPEG
720 x 576, 352 x 288, 176 x 144
720 x 576, 720 x 288, 640 x 480, 360 x 288, 176 x 144
JPEG
5 levels
Max. 25 IPS (720 x 576)
Max. 25 IPS (720 x 576)
JPEG
128, 256, 512 Kbps, 1,2,3,4 Mbps, no limitation
Up to 8 MB; configurable
10BASE-T/100BASE-TX (RJ45 connector)
TCP, UDP, HTTP, HTTPS, SMTP, NTP, DHCP, FTP, UPnP, DDNS
Image: Maximum 16, Voice: Maximum 16 (admin: 1)
BASIC authentication (ID/password), SSL supported (image only)
PC IE: CPU: Pentium GHz, Memory: 1 GB or more, Recommended graphics chip: GEFORCE6000 series or higher, OS: Windows
CD-ROM (VA-SW3050LITE, Active X, Manual)
®
4, 2.0 GHz or higher, Memory: 512 MB, SW3050: CPU 3.0
®
XP
Temperature: -20°C to 50°C [-4° to 122°F], (with power source connected) Humidity: within 90% RH
4.9 W (XZ600P) / 7.3 W (XZN600P)
141(W) x 172(H) x 400(D) mm
5.6(W) x 6.8(H) x 15.7(D) in.
1.77 kg (62.4 oz.) (XZ600P)
1.82 kg (64.2 oz.) (XZN600P)
*VCC-ZM600P and VCC-XZ600P only
Dimensions
Unit: mm (inch)
VCC-ZM600P/ZMN600P
10 (0.4)
64 (2.5)
56 (2.2)
(0.1)
11
3
147 (5.8)
1/4"-20UNC
Rear panel
1
2
3
VCC-ZM600P VCC-ZMN600P
1
Power indicator (POWER)
2
Video output connector (BNC connector: VIDEO OUT)
3
Control terminals
4
1
2
3
5
4
System connection terminals (RS485/UTP)
5
Power connection terminals (AC 24V, DC 12V, GND)
6
LAN
6
5
VCC-XZ600P/XZN600P
400 (16)
224 (8.9) 211 (8.3)
381 (15)
21 (0.9)
113 (4.5)
87 (3.4)
123 (4.9)
75 (3.0)
29 (1.2)
141 (5.7)
29 (1.2)
172 (6.8)
87 (3.4)
Optinal Accessories (sold separately)
Network Recorder
VA-SW3050S
for server PC
Camera control unit
VAC-70
VA-SW3050C
for client PCs
Microsoft and Windows are either registered trademarks or trademarks of Micro­soft Corporation in the United States and/or other countries. Intel and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the U.S. and other countries. All other trademarks are the property of their re­spective owners.
Note:
• Frame rates are variable dependant upon network line conditions and PC performance.
• Because products and software described in this brochure are subject to continuous improvement; SANYO reserves the right to modify product specifi­cations, functions and design without notice.
• Comparative images are representations only.
182 (7.2)
Caution: Please consult the instruction manual to ensure safe and proper operation of the product.
DI Company of SANYO Electric Co., Ltd. obtained Quality Management System ISO 9001 and Environmental Management System ISO 14001 certifications.
Distributed by:
EC00J0303
051
SANYO Electric Co., Ltd.
DI Company
http://www.sanyosecurity.com
©2007 SANYO Printed in Japan 2007.11 MA
SMS151
Loading...