VCC-9800P/9700P/9600P/9500P
Specifications
36x, Day/Night Camera 36x, Color Camera 30x, Day/Night Camera 30x, Color CameraCamera type
Model No.
Scanning system
Image sensor
Picture elements
Horizontal resolution
Minimum
illumination
(approx.)
Electronic sensitivity boost
Video S/N ratio
Backlight compensation
White balance
Gain control
Electronic shutter
Zoom lens
Auto focus
Iris control
Backlight compensation
Day/night operation
Electronic sensitivity boosting
Aperture
Privacy masking
Alarm input/output
Preset positions
Movement
range
Movement
speed
Motion detection
Synchronizing system
Communication
Protocols
Environmental
conditions
Power requirement
Power
consumption
(approx.)
Weight
(approx.)
50 IRE
20 IRE
Panning
Tilting
Panning
Tilting
Temperature
Humidity
Camera unit +
Power supply
base
Outdoor
housing
Outdoor types
Surface types
In-ceiling
types
VA-80LAN Optional Network Board
Image compression
Resolution
Picture quality
Frame rate
Audio compression method
Microphone input
Audio output
Bandwidth
Alarm buffer
Interface
Protocols
Simultaneous access capacity
Security
Bundled software
1.0 lx (at F1.6, GAIN: HIGH, color mode)
0.05 lx, (at F1.6, B/W mode)
0.4 lx (at F1.6, GAIN: HIGH, color mode)
0.02 lx, (at F1.6, B/W mode)
ON / OFF, slide SW, ON = Multi-spot photometry (48-section) / 5-section photometry / Multi-spot masking (48-section)
High-speed mode: 8 steps: 1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000
ON / OFF, up to 16x electronic zoom (Max. 576x combined with optical zoom)
TBD:
TBD:
5.1 kg =VCC-9800EXCP/9800EXSP
2.4 kg =VCC-9800INP
3.4 kg =
2.7 kg =
36x optical zoom, f = 3.4 to 122.4 mm (F1.6 to 4.5)
Auto / Color / B/W settings Auto / Color / B/W settings— —
External inputs: 8, External outputs: 2, NO (Normal Open)/NC (Normal Closed) switch, Motion detection with external alarm AND/OR output options
VCC-MC800P + VA-84S
VCC-MC800P + VA-80S
VCC-9830EXCP/9830EXSP
VCC-9830INP
VCC-9800EMP
VCC-9830EMP
VCC-9800EFP
VCC-9830EFP
720 x 572, 720 x 572DFFC*, 720 x 286, 640 x 480, 640 x 480DFFC*,
–62 to –32 dB (monaural microphone) 3.5 mm mini jack
LINE OUT, monaural audio output, Max. –8 dB, 3.5 mm mini jack
128, 256, 512 Kbps, 1, 2, 3, 4 Mbps, no limitation
TCP, UDP, HTTP, HTTPS, SMTP, NTP, DHCP, FTP, UPnP
BASIC authentication (ID/password), SSL supported (image only)
ON / OFF, max. of 24 masked locations (Wide view screen; 1 screen max. 4 masks) All-around privacy masking
256 128
–10 to 50°C (+14 to 122°F), –30 to 50°C (–22 to 122°F) when the outdoor housing, VA-80EX is used
JPEG
360 x 286, 180 x 143
5 levels
Max. 25 IPS (720 x 286)
G.711 (192 kbps), full duplex
Up to 8 MB; configurable
10BASE-T/100BASE-TX (RJ45 connector)
Image: Max. 16, Voice: Max. 16 (admin: 1)
VA-SW3050LITE
1.0 lx (at F1.6, GAIN:
HIGH, color mode)
0.4 lx (at F1.6 GAIN:
HIGH, color mode)
Low-speed mode: 5 steps: 2x, 4x, 8x, 16x, 32x (1/25, 1/12, 1/6, 1/3, 1/1.5)
Centerweighted average metering/multi-spot evaluative metering
Auto / OFF, works with auto iris, settings up to 32x setting possible
TBD:
VCC-MC700P + VA-84S
TBD:
VCC-MC700P + VA-80S
5.1 kg =VCC-9700EXCP/9700EXSP
VCC-9730EXCP/9730EXSP
2.4 kg =VCC-9700INP
VCC-9730INP
3.4 kg =
VCC-9700EMP
VCC-9730EMP
2.7 kg =
VCC-9700EFP
VCC-9730EFP
PAL standard 625 lines, 50 fields/sec.
1/4” (approx. 3.6 x 2.7 mm) interline transfer method CCD
Total: 795(H) x 596(V), Effective: 752(H) x 582(V)
Auto (interlocked with auto iris), up to 32x / OFF
ATW / AWC / Manual / Outdoor / Indoor / Fluorescent
LOW / NORMAL / MID / HIGH / OFF
Preset: 435°/sec., Manual: 0.1 to 120°/sec.
Preset: 400°/sec., Manual: 0.1 to 120°/sec.
ON (PRESET, ZONE) / OFF: Motion zoom function
Internal sync. / Line lock (LINE PHASE)
24 V AC, 50Hz or 230 V AC, 50Hz
520 TV lines
0.8 lx (at F1.4, GAIN: HIGH, color mode)
0.04 lx, (at F1.6, B/W mode)
0.32 lx (at F1.4, GAIN: HIGH, color mode)
0.016 lx, (at F1.6, B/W mode)
More than 50 dB (AGC OFF)
Auto / One-push / Manual
H/V setting possible
–5 to 185° (digital auto flip ON)
RS-485 / Coaxial control
SANYO, Pelco-D, Other (TBD)
ON / OFF, up to 16x electronic zoom (Max. 480x combined with optical zoom)
Auto / Manual
360° endless
35 to 90% RH
VCC-MC600P + VA-84S
16 W:
VCC-MC600P + VA-80S
17 W:
35W: VA-80EX
5.1 kg =VCC-9600EXCP/9600EXSP
VCC-9630EXCP/9630EXSP
2.4 kg =VCC-9600INP
VCC-9630INP
3.4 kg =
VCC-9600EMP
VCC-9630EMP
2.7 kg =
VCC-9600EFP
VCC-9630EFP
*DFFC: Dynamic Field/Frame Conversion
Motion detection and field/frame conversion are performed to enhance
the vertical resolution of images with no movement and reduce blurring
of moving objects in images with movement.
Microsoft and Windows are either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or other countries. Intel
and Pentium are trademarks or registered trademarks of Intel Corporation
or its subsidiaries in the U.S. and other countries. All other trademarks are
the property of their respective owners.
Note:
• Frame rates are variable dependant upon network line conditions and
PC performance.
• Because products and software described in this brochure are subject
to continuous improvement; SANYO reserves the right to modify
product specifications, functions and design without notice.
• Comparative images are representations only.
30x optical zoom, f = 3.5 to 105 mm (F1.4 to 3.7)
0.8 lx (at F1.4, GAIN:
HIGH, color mode)
0.32 lx (at F1.4, GAIN:
HIGH, color mode)
VCC-MC500P + VA-84S
16 W:
VCC-MC500P + VA-80S
17 W:
5.1 kg =VCC-9500EXCP/9500EXSP
VCC-9530EXCP/9530EXSP
2.4 kg =VCC-9500INP
VCC-9530INP
3.4 kg =
VCC-9500EMP
VCC-9530EMP
2.7 kg =
VCC-9500EFP
VCC-9530EFP
High-Performance
Speed Dome Camera
Systems
VCC-9800P
VCC-9700P
VCC-9600P
VCC-9500P
Outdoor type
High-performance cameras that integrate lenses,
motorized drives, control systems and housings with
newly developed cutting-edge technologies to provide
high-precision surveillance matched
to a broad range of applications.
PAL
PAL
PAL
PAL
36x
36x
30x
30x
Optical
zoom
Optical
zoom
Optical
zoom
Optical
zoom
Caution: Please consult the instruction manual to ensure safe and proper operation of the product.
DI Company of SANYO Electric Co., Ltd.
obtained Quality Management System
ISO 9001 and Environmental Management
System ISO 14001 certifications.
SANYO Electric Co., Ltd.
www.sanyosecurity.com
©2006 SANYO Printed in Japan ’06.12. MA.
SMS137
Distributed by:
EC00J0303
051
Time-tested technology and know-how
combine to provide both high-performance
surveillance and ease of use.
Cameras that introduce an array of new technologies for surveillance with a motorized drive
system for high-speed, 435°/sec panning and pinpoint accuracy, high-power magnification with
a 36x optical* and a 16x digital zoom, and a host of features that include image stabilization,
automatic tracking* and optimum auto focus.
Production of power supply bases and camera units—with integrated lens, motor and pan/tilt
mechanism—starts and ends in Japan to ensure the highest build quality, while release levers
on camera housings make installation and on-site maintenance as simple as can be.
*VCC-9800P/9700P cameras
In-ceiling type
Outdoor type
Surface type
Featuring industry-leading mechanisms
newly developed for high performance.
High-Speed Panning at 435° per Second
The camera makes it possible to capture images at exact
points during surveillance with high-speed panning at 435°/sec.
between preset positions. The motor is several times more
precise with movement in 0.009 of a degree increments. This
precise mechanism allows capture of quickly moving objects
and objects approaching the camera when it is zoomed in.
Pan/tilt speed
Pan
Tilt
Manual pan/tilt
Max. 435°/sec.
Max. 400°/sec.
0.1 to 120°/sec.
Preset Accuracy to ±0.014 (typical)
of a Degree
In the case of a speed dome camera, the motorized drive’s per-
formance is vital in order to capture numerous points of surveillance during lens movement and zoom-ratio changes. SANYO’s
new series of speed dome cameras keeps the accuracy of the
camera’s return to preset points to within 0.014 (typical) of a
degree for precision capture of images from surveillance.
Image Stabilization
Blurring due to vibration of the camera can be electronically
removed. It is also possible to correct for blurring only while
continuing camera movement such as pan and tilt.
Shaking due to
strong wind or
traffic vibration
Automatic Tracking
Cameras feature an image processing algorithm
that is capable of detecting moving objects on the
screen and tracking an object automatically.
When there are multiple movements, the
object with the largest degree of movement is tracked. Further settings
are available according to the
pattern of movement.
(VCC-9800P/9700P)
Without image stabilization With image stabilization
(VCC-9800P/9700P)
Designated point set using
preset position function
Image from conventional
camera* with error margin
as large as 0.2°
*VCC-9400P/9300P cameras
Error margin of designated
point is a mere 0.014°
(typical) with VCC-9800P/
9700P/9600P/ 9500P
cameras
Optimum Auto Focus
Further development of conventional auto-focus functions has
resulted in not only shorter focus times, but also the added
capability of remaining clearly focused on a targeted subject in
front of the camera, even when other elements are passing in
and out of the field of view. And with optimum focus, images
remain in focus, even when the lens is in motion during
pan/tilt operation.
Features
Max. 576x Zoom Combined with 36x Optical and
16x Digital Zooms (VCC-9800P/9700P)
The 36x optical zoom and 16x digital zoom can be combined
for a close-up at a magnification power of 576x. This allows
even distant subjects to be checked in detail, allowing one
camera to monitor a wider area.
36x
Optical zoom
Up to 256 Preset Positions
The user can set up to 256 preset positions with VCC-9800P/
9700P cameras and up to 128 preset positions with VCC9600P/9500P cameras. Preset positions can be set to any
angle—from directly below the camera to 5° higher than the
horizontal position—to allow capture of any image in the area
under surveillance by facing any direction in the adjustable
range of the lens. When manually operated, the lens can be
moved at the speed of 0.1 to 120°/sec for accurate tracking of
moving objects.
Camera
Entrance
Display floor
Store display floor example
Reception
3 T ypes of Auto Mode Settings
Sequence:
Auto pan:
Tour:
Auto return:
Automatic viewing of up to 256 presets (36x
models) or 128 presets (30x models), with
selectable switching order and pause times for
up to 4 different sequences.
Up to 4 different settings for automatic panning
between two points at selectable speeds.
Up to 4 different settings capable of storing up to
1,000 commands of manual pan/tilt/zoom
operation in memory and recreating the same
movement pattern.
Enables automatic return to the mode set in
“auto return” when manual operation is not
performed within a specified amount of time.
Display floor
Upward Surveillance Enabled PTZ Operation
In addition to endless 360°/sec panning, the camera’s lens
section enables 185°/sec tilting in the vertical plane for an area
of surveillance expanded by 5° (indoor applications only) compared to previous models.
Horizontal level
Panning range
360˚endless
No dead areas with new speed dome cameras
Dead area when at 0° tilt
Image from conventional
camera* at 0° tilt
*VCC-9400P/9300P cameras
Upward tilt to 5° past zero for
an expanded area of surveillance with VCC-9800P/9700P/
9600P/9500P cameras
Tilting range
–5˚ to 185˚
(With digital auto flip ON)
All-around Privacy Masking
When there is a house, or even a window, within the camera frame, it is
possible to mask the area so that it
will not appear on the monitor screen,
thus protecting other people’s privacy.
Up to 24 rectangular masks of arbitrary size (rectangular) can be set.
SSP (RS-485) Compatible
By using SSP (SANYO Security Serial Protocol), devices can
be controlled with just one controller via a daisy chain connection of up to 254 cameras and 100 DVRs. The maximum cable
length (total length of the daisy chain path) is 1200 m (approx.
4000 feet).
Main
Monitor
Digital Video
Recorder
SSP System Controller
Dome
Camera
Spot Monitor Spot Monitor
SSP System Controller
Main
Monitor
Digital Video
Recorder
Dome
Camera
RS-485
Coaxial
Coaxial Control or RS-485
Communication protocol:
Coaxial control: SSP / H-SSP / PELCO-C
RS-485: SSP / H-SSP / PELCO-D
Adjustment via VAC-70 Control Unit (Sold separately)
Connection of the VAC-70 control unit allows adjustment of
pan/tilt/zoom and setup directly from
an on-screen menu.
Video coaxial cable
VAC-70 Monitor
Flexible Motion Detection
The built-in motion sensing function can be used to detect
movement by a target object such as an intruder.
The following two settings can be used for this function.
PRESET :
ZONE:
Setting of both modes, PRESET and ZONE, cannot be performed at the same time.
Detects motion at a preset position. Allows setting of motion
detection within the whole picture or setting of mask
patterns to exclude certain elements from detection.
The camera can be set to zoom in and out automatically
when motion is detected.
Surveillance of a detected object can be conducted at the following zoom magnifications.
IN: 1.4x, 2x, 2.8x, 4x, 5.6x, 8x, FULL (zooming in to the TELE end)
OUT: 1/1.4x, 1/2x, 1/2.8x, 1/4x, 1/5.6x, 1/8x, FULL (zooming out to the WIDE end)
Detects motion in detection areas (from one to four areas) set
within the whole space for which surveillance is possible during a pan/title operation. Sensing is performed by splitting the
field of view into 48 areas. Movement and brightness levels
within the picture are analyzed to accurately detect surveillance
targets. When motion is detected, the camera can be set to
output alarm detection to ALARM OUT or LINE OUT, etc.
With ZONE setting, sensing occurs in areas set within the picture of the zone
targeted by the camera. No sensing occurs outside the camera’s target zone.
Setting Alarm Function
The unit can be connected to an external door switch or infrared sensor (external alarm input: 8 channels). When an alarm is
detected, the camera gives notice by automatically moving to
the preset position, zooming in on the image or displaying the
alarm on the screen. Furthermore, it has a built-in motion
sensor, which outputs alarm signals when a moving object,
such as an intruder, is detected. If you connect external
buzzers and/or lamps (external alarm output: 2 channels), alarm
signals will also be output to
them at alarm detection for you
to have audible and/or visual
notifications.
Terminal side (Side-A)
Intelligent Switching from Color to
B/W (VCC-9800P/9600P)
Proprietary auto-switching
infrared cut filter
Color mode IR cut filter ON
B/W
Lx
mode
Time
Switchover point
B/W
mode
3~9 lx
1~3 lx
B/W mode
High mode
Low mode
Color mode
(Approx.)
High-Sensitivity, Minimum Required Illumination
Model no.
VCC-9800P
VCC-9700P
VCC-9600P
VCC-9500P
(with F1.6 lens)
(with F1.6 lens)
(with F1.4 lens)
(with F1.4 lens)
High gain, color mode High gain, B/W mode
20 IRE
0.4 lx
0.4 lx
0.32 lx
0.32 lx
50 IRE
1.0 lx
1.0 lx
0.8 lx
0.8 lx
20 IRE
0.02 lx
—
0.016 lx
—
50 IRE
0.05 lx
—
0.04 lx
—
SANYO Security Systems for the Creation
of a Full-fledged LAN or Internet
Network Board VA-80LAN
This optional board for network connection enables SANYO
VCC-9800P/9700P/9600P/9500P cameras to connect to a network. The user can operate a network connected camera using a web browser (Internet Explorer). Included with the board
is the VA-SW3050LITE viewer software for viewing feeds
from multiple cameras.
Network Recording Software
VA-SW3050
VA-SW3050 network recording software is sold
separately for recording of surveillance video
and audio captured by cameras. With a PC used as a local
server, the VA-SW3050 software enables not only data
playback and recording but also improved system operation,
making it a powerful tool for network management.
VA-SW3050LITE/VA-SW3050 Feature Comparison
Number of cameras supported
Number of users supported
Search camera
Live monitor
Camera control
Recording
Playback
Video search
Backup/Restore
Download/Print
VA-SW3050LITE/VA-SW3050 System Requirements
PC
OS
CPU/
Memory
Network
interface
Display card
Audio
Component
(Sold separately)
PTZ, etc.
Menu
IBM PC/AT and compatibles
®
Windows
SP2, Windows
When the number of cameras connected is 4 or fewer:
CPU: Pentium
When the number of cameras connected is between 5 and 16:
CPU: Pentium
MEMO (VA-SW3050):
When you record live video from 17 or more cameras simultaneously on a single PC, recording performance may be diminished
depending on your monitoring system configuration. In such
cases, add PCs used for recording so that the number of cameras
to record simultaneously per PC becomes 16 or fewer.
100Base-TX
1024 x 768 pixels or higher, 16 million colors or higher
AGP graphics card supporting hardware overlay
or PCI Express graphics card (Requires the latest DirectX 9.0c
compatible driver.)
Recommended graphics chips:
ATI: RADEON 9000 series or higher
nVidia: GeForce 4 series or higher
Matrox: MillenniumP series or higher
Sound card and speakers with 100% DirectX compatibility
DirectX 9.0c
2000 Professional SP4, Windows® XP Home Edition
®
XP Professional SP2
®
4, 2.0 GHz or higher, Memory: 512 MB or more
®
4, 3.0 GHz or higher, Memory: 1 GB or more
Quadro 4 series or higher
(Sold separately)
VA-SW3050LITE
(Bundled)
Max. 128
Max. 16
Yes
Yes
Yes
Yes
No
No
No
No
No
VA-SW3050
(Sold separately)
Max. 128
Max. 16
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Applications
A wide selection of options is available
—
covering camera performance, housings, mounting brackets and more
for a match to the application of your choice. Installation work and maintenance is now easier than ever before.
—
Outdoor type
Outdoor housing
VA-84S
Power supply base
Camera unit
VA-CM8C
Clear dome cover
for outdoor housing
(Sold separately)
Mounting Brackets
Options (Sold separately)
VA-80BP
Pendant mounting
bracket (Indoor use)
Use when suspending the
camera from a ceiling.
24 V AC
IP66
Rated
VCC-MC800P
VCC-MC700P
VCC-MC600P
VCC-MC500P
VA-CM8S
Smoked dome cover
for outdoor housing
(Sold separately)
VA-80BW
Wall mounting bracket
Use when installing the
camera to a wall.
Available in Three Types:
Outdoor, Surface or In-Ceiling
The camera is available in three different styles. Assemble them with
different fittings and covers to make the camera most suitable for your
surveillance needs.
(Closed type) (Open type)
VA-80F
Surface type
VA-84S / 80S
Power supply base
24 V AC / 230 V AC
VCC-MC800P
VCC-MC700P
VCC-MC600P
VCC-MC500P
Camera unit
with clear dome cover (standard)
(Smoked dome cover [VA-CZ80] option)
Surface cover
VA-80A
Attachment
(Indoor use)
Use when mounting the
camera with VA-80F on
VA-80BP or VA-80BW.
VA-80ME
In-ceiling type
VA-84S / 80S
Power supply base
24 V AC / 230 V AC
Camera unit
with clear dome cover (standard)
(Smoked dome cover [VA-CZ80] option)
VA-80AC
Corner mounting adaptor
Use with the VA-80BW when
installing the camera to a
surface such as the corner
of a wall.
VA-80MFVA-80EX
In-ceiling bracketIn-ceiling bracket
VCC-MC800P
VCC-MC700P
VCC-MC600P
VCC-MC500P
VA-80AP
Pole mounting adaptor
Use with the VA-80BW when
installing the camera to a pole.
Model number codes
Camera type
36x, Day/night
8
36x, Color
7
30x, Day/night
6
30x, Color
5
3 0
0 0
Model configurations example
Model name
VCC-9800EXCP
VCC-9530EFCP
VCC-9700INSP
Dimensions Unit: mm (inch)
Camera Unit/Power Supply Base
4-ø4.5 (0.2)
P.D ø168 (6.6)
57.3
107.2 (4.2)
191.5 (7.5)
Mounting Brackets (Sold separately)
VA-80BP
Pendant Mounting
Bracket
45°
(2.3)
Camera unit
VCC-MC800P
VCC-MC500P
VCC-MC700P
ø186 (7.3)
ø137.4 (5.4)
ø147.5 (5.8)
4-ø8.5 (0.3)
P.D ø101.6 (4.0)
ø136 (5.4)
ø130 (5.1)
ø96 (3.8)
Housing type
Surface cover
I N
In-ceiling (closed)
E M
In-ceiling (open)
E F
Outdoor housing
E X
Power
AC230V
AC24V
Power basement
+
VA-84S
+
VA-80S
+
VA-84S
Scanning system
PAL
P
Dome cover
Clear cover
C
Smoked cover
S
+
VA-80EX
+
VA-80MF
+
VA-80F
Housings (Sold separately)
VA-80EX
Outdoor Housing
ø146
(5.7)
ø224 (8.8)
ø248 (9.8)
VA-80BW
Wall Mounting Bracket
300 (11.8)
329 (13.0)
ø96.5 (3.8)
Housing
24 V AC
239.8 (9.4)
191.5 (7.5)
+++
Dome cover
+
VA-CM8C
+
VA-CZ80
6 (0.2)
192 (7.6)
181.6 (7.1)
Easy-to-Manage Installation,
Setup and Adjustment
Enclosed within the housing are an integrated lens, a motor
and a pan/tilt mechanism. Attachment to the power supply
base by simply sliding the release levers simplifies installation
at the point of surveillance. The settings circuit board is detachable for access to protocol, address and other switch settings,
and the VAC-70 controller (sold separately) and can be connected after installation to allow adjustment of PTZ control and
other settings from an on-screen menu.
Detachable without
disconnecting power cable
Slide the camera unit’s two release
levers and lock the power supply base
into position. No special tools required
for camera unit installation or removal.
Safety Cable
Equipped with a
safety cable that
connects the housing and power supply base to prevent
the camera unit from
falling.
VA-80F
Surface Cover
ø192 (7.6)
ø109.7 (4.3)
265.1 (10.4)
Dome Cover
VA-CM8C
Clear dome cover for outdoor housing
VA-CM8S
Smoked dome cover for outdoor housing
VA-CZ80
Smoked dome cover for indoor housing
VA-80A
Attachment
ø194 (7.6)
191 (7.5)
45 (1.8)
Detachable Settings
Circuit Board
Release
lever
Terminal side
(Side-A)
Alarm inputs (8)
Alarm outputs (2)
RS-485A/RS-485B
VA-80ME
In-Ceiling Bracket
(closed type)
VA-80MF
In-Ceiling Bracket (open type)
51.3
ø216 (8.5)
VA-80AC
Corner Mounting Adaptor
90˚
100 (3.9)
119 (4.7)
260.4 (10.3)
172.8 (6.8)
Basic camera settings
can be made while holding the settings circuit
board in hand, as the
board is detachable from
the power supply base.
The I/O side of the board
features 8 input and 2
output terminals for
alarm signals.
DIP switch side
(Side-B)
Address setting
Baud rate setting
RS-485/Coax setting
SSP/Pelco setting
Termination setting
ø190.2 (7.5)
ø28.5 (1.1)
ø216 (8.5)
(2.0)
152 (6.0)
162.5 (6.4)
VA-80AP
Pole Mounting Adaptor
ø85–ø165 (3.3–6.5) (TBD)
193 (7.6)
127 (5)
101.1 (4.0)
50 (2.0)
193 (7.6)
111.5 (4.4)
Loading...