Page 1
VCC-9800
VCC-9700
VCC-9600
VCC-9500
High-Performance
Speed Dome Camera
Systems
High-performance cameras that integrate lenses,
motorized drives, control systems and housings with
newly developed cutting-edge technologies to provide
high-precision surveillance matched
to a broad range of applications.
NTSC
36x
Optical
zoom
36x
Optical
zoom
NTSC
30x
Optical
zoom
NTSC
NTSC
30x
Optical
zoom
Outdoor type
Page 2
Cameras that introduce an array of new technologies for surveillance with a motorized drive
system for high-speed, 435°/sec panning and pinpoint accuracy, high-power magnification with
a 36x optical*1 and a 16x digital zoom, and a host of features that include image stabilization,
automatic tracking*1 and optimum auto focus.
Production of power supply bases and camera units—with integrated lens, motor and pan/tilt
mechanism—starts and ends in Japan to ensure the highest build quality*2, while release levers
on camera housings make installation and on-site maintenance as simple as can be.
Surface type
Time-tested technology and know-how
combine to provide both high-performance
surveillance and ease of use.
In-ceiling type
*1 VCC-9800/9700 cameras
*
2
Housings and mounting brackets are made in china
Page 3
High-Speed Panning at 435° per Second
The camera makes it possible to capture images at exact points
during surveillance with high-speed panning at 435°/sec.
between preset positions. The motor is several times more
precise with movement in 0.009 of a degree increments. This
precise mechanism allows capture of quickly moving objects and
objects approaching the camera when it is zoomed in.
Preset Accuracy to ±0.014 (typical)
of a Degree
In the case of a speed dome camera, the motorized drive’s performance is vital in order to capture numerous points of surveillance during lens movement and zoom-ratio changes. SANYO’s
new series of speed dome cameras keeps the accuracy of the
camera’s return to preset points to within 0.014 (typical) of a
degree for precision capture of images from surveillance.
Optimum Auto Focus
Further development of conventional auto-focus functions has
resulted in not only shorter focus times, but also the added
capability of remaining clearly focused on a targeted subject in
front of the camera, even when other elements are passing in
and out of the field of view. And with optimum focus, images
remain in focus, even when the lens is in motion during pan/tilt
operation.
Pan/tilt speed
Pan
Tilt
Manual pan/tilt
Max. 435°/sec.
Max. 400°/sec.
0.1 to 120°/sec.
Image Stabilization
(VCC-9800/9700)
Blurring due to vibration of the camera can be electronically
removed. It is also possible to correct for blurring only while
continuing camera movement such as pan and tilt.
Automatic Tracking
(VCC-9800/9700)
Cameras feature an image processing algorithm
that is capable of detecting moving objects on the
screen and tracking an object automatically.
When there are multiple movements, the
object with the largest degree of movement is tracked. Further settings
are available according to the
pattern of movement.
Without image stabilization With image stabilization
Shaking due to
strong wind or
traffic vibration
Outdoor type
Featuring industry-leading mechanisms
newly developed for high performance.
Designated point set using
preset position function
Error margin of designated
point is a mere 0.014°
(typical) with VCC-9800/
9700/9600/9500 cameras
Image from conventional
camera* with error margin
as large as 0.2°
*Competitor’s
Page 4
Features
All-around Privacy Masking
When there is a house, or even a
window, within the camera frame, it is
possible to mask the area so that it will
not appear on the monitor screen, thus
protecting other people’s privacy. Up to
24 rectangular masks of arbitrary size
(rectangular) can be set.
Up to 256 Preset Positions
The user can set up to 256 preset positions with VCC-9800/
9700 cameras and up to 128 preset positions with VCC9600/9500 cameras. Preset positions can be set to any
angle—from directly below the camera to 5° higher than the
horizontal position—to allow capture of any image in the area
under surveillance by facing any direction in the adjustable range
of the lens. When manually operated, the lens can be moved at
the speed of 0.1 to 120°/sec for accurate tracking of moving
objects.
Max. 576x Zoom combined with 36x Optical and 16x
Digital Zooms (VCC-9800/9700)
The 36x optical zoom and 16x digital zoom can be combined for
a close-up at a magnification power of 576x. This allows even
distant subjects to be checked in detail, allowing one camera to
monitor a wider area.
Automatic viewing of up to 256 presets (36x
models) or 128 presets (30x models), with
selectable switching order and pause times for
up to 4 different sequences.
Up to 4 different settings for automatic panning
between two points at selectable speeds.
Up to 4 different settings capable of storing up to
1,000 commands of manual pan/tilt/zoom
operation in memory and recreating the same
movement pattern.
Enables automatic return to the mode set in
“auto return” when manual operation is not
performed within a specified amount of time.
Sequence:
Auto pan:
Tour:
Auto return:
3 Types of Auto Mode Settings
VAC-70 Monitor
Adjustment via VAC-70 Control Unit (Sold separately)
Connection of the VAC-70 control unit allows adjustment of
pan/tilt/zoom and setup directly from an on-screen menu.
Video coaxial cable
Coaxial Control or RS-485
Communication protocol:
Coaxial control: SSP / H-SSP / PELCO-C
RS-485: SSP / H-SSP / PELCO-D
SSP (RS-485) Compatible
By using SSP (SANYO Security Serial Protocol), devices can be
controlled with just one controller via a daisy chain connection of
up to 254 cameras and 100 DVRs. The maximum cable length
(total length of the daisy chain path) is 1200 m (4000 feet)
(approx.).
Panning range
360˚endless
Horizontal level
Tilting range
–5˚ to 185˚
(With digital auto flip ON)
Main
Monitor
SSP System Controller
Digital Video
Recorder
Dome
Camera
Main
Monitor
SSP System Controller
Dead area when at 0° tilt
No dead areas with new speed dome cameras
Optical zoom
36x
Store display floor example
Display floor
Display floor
Reception
Camera
Entrance
Digital Video
Recorder
Dome
Camera
RS-485
Coaxial
Spot Monitor Spot Monitor
Upward Surveillance Enabled PTZ Operation
In addition to endless 360°/sec panning, the camera’s lens section enables 185°/sec tilting in the vertical plane for an area of
surveillance expanded by 5° (indoor applications only) compared
to previous models.
Image from conventional
camera* at 0° tilt
*Competitor’s
Upward tilt to 5° past zero for
an expanded area of surveillance with VCC-9800/9700/
9600/9500 cameras
Page 5
SANYO Security Systems for the Creation
of a Full-fledged LAN or Internet
This optional board for network connection enables SANYO
VCC-9800/9700/9600/9500 cameras to connect to a network.
The user can operate a network connected camera using a web
browser (Internet Explorer). Included with the board is the
VA-SW3050LITE viewer software for viewing feeds from multiple
cameras.
Time
Lx
B/W
mode
B/W
mode
Color mode IR cut filter ON
Proprietary auto-switching
infrared cut filter
Switchover point
B/W mode
(Approx.)
High mode
1~3 lx
3~9 lx
Low mode
Color mode
Model no.
VCC-9800
(with F1.6 lens)
VCC-9700
(with F1.6 lens)
VCC-9600
(with F1.4 lens)
VCC-9500
(with F1.4 lens)
High gain, color mode High gain, B/W mode
20 IRE
0.02 lx
—
0.016 lx
—
50 IRE
0.05 lx
—
0.04 lx
—
High-Sensitivity, Minimum Required Illumination
Setting Alarm Function
The unit can be connected to an external door switch or infrared
sensor (external alarm input: 8 channels). When an alarm is
detected, the camera gives notice by automatically moving to
the preset position, zooming in on the image or displaying the
alarm on the screen. Furthermore, it has a built-in motion sensor,
which outputs alarm signals when a moving object, such as an
intruder, is detected. If you connect external buzzers and/or
lamps (external alarm output: 2
channels), alarm signals will also
be output to them at alarm
detection for you to have audible
and/or visual notifications.
Network Board VA-80LAN
(Sold separately)
Network Recording Software
VA-SW3050
(Sold separately)
VA-SW3050 network recording software is sold
separately for recording of surveillance video and
audio captured by cameras. With a PC used as a local server, the
VA-SW3050 software enables not only data playback and recording but also improved system operation, making it a powerful tool
for network management.
Intelligent Switching from Color to
B/W (VCC-9800/9600)
Terminal side (Side-A)
20 IRE
0.4 lx
0.4 lx
0.32 lx
0.32 lx
50 IRE
1.0 lx
1.0 lx
0.8 lx
0.8 lx
VA-SW3050LITE/VA-SW3050 Feature Comparison
Number of cameras supported
Number of users supported
Search camera
Live monitor
Camera control
Recording
Playback
Video search
Backup/Restore
Download/Print
VA-SW3050LITE
(Bundled)
Max. 128
Max. 16
Yes
Yes
Yes
Yes
No
No
No
No
No
VA-SW3050
(Sold separately)
Max. 128
Max. 16
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
PTZ, etc.
Menu
VA-SW3050LITE/VA-SW3050 System Requirements
IBM PC/AT and compatibles
Windows
®
2000 Professional SP4, Windows® XP Home Edition SP2,
Windows
®
XP Professional SP2
When the number of cameras connected is 4 or fewer:
CPU: Pentium
®
4, 2.0 GHz or higher, Memory: 512 MB or more
When the number of cameras connected is between 5 and 16:
CPU: Pentium
®
4, 3.0 GHz or higher, Memory: 1 GB or more
MEMO (VA-SW3050):
When you record live video from 17 or more cameras simultaneously
on a single PC, recording performance may be diminished depending
on your monitoring system configuration. In such
cases, add PCs used for recording so that the number of cameras to
record simultaneously per PC becomes 16 or fewer.
100Base-TX
1024 x 768 pixels or higher, 16 million colors or higher
AGP graphics card supporting hardware overlay
or PCI Express graphics card (Requires the latest DirectX 9.0c compatible driver.)
Recommended graphics chips:
ATI: RADEON 9000 series or higher
nVidia: GeForce 4 series or higher
Quadro 4 series or higher
Matrox: MillenniumP series or higher
Sound card and speakers with 100% DirectX compatibility
DirectX 9.0c
PC
OS
CPU/
Memory
Network
interface
Display card
Audio
Component
Flexible Motion Detection
The built-in motion sensing function can be used to detect movement by a target object such as an intruder.
The following two settings can be used for this function.
Setting of both modes, PRESET and ZONE, cannot be performed at the same time.
PRESET:
ZONE:
Detects motion at a preset position. Allows setting of motion
detection within the whole picture or setting of mask patterns
to exclude certain elements from detection. The camera can be
set to zoom in and out automatically when motion is detected.
Surveillance of a detected object can be conducted at the following zoom magnifications.
IN: 1.4x, 2x, 2.8x, 4x, 5.6x, 8x, FULL (zooming in to the TELE end)
OUT: 1/1.4x, 1/2x, 1/2.8x, 1/4x, 1/5.6x, 1/8x, FULL (zooming out to the WIDE end)
Detects motion in detection areas (from one to four areas) set
within the whole space for which surveillance is possible during a
pan/title operation. Sensing is performed by splitting the field of
view into 48 areas. Movement and brightness levels within the
picture are analyzed to accurately detect surveillance targets.
When motion is detected, the camera can be set to output alarm
detection to ALARM OUT or LINE OUT, etc.
With ZONE setting, sensing occurs in areas set within the picture of the zone targeted by the camera. No sensing occurs outside the camera’s target zone.
Page 6
Applications
Available in Three Types:
Outdoor, Surface or In-Ceiling
The camera is available in three different styles. Assemble them with
different fittings and covers to make the camera most suitable for your
surveillance needs.
Mounting Brackets
Options (Sold separately)
VA-80F
Surface type
VA-80BP
Pendant mounting
bracket (Indoor use)
Use when suspending the
camera from a ceiling.
VA-80A
Attachment
(Indoor use)
Use when mounting the
camera with VA-80F on
VA-80BP or VA-80BW.
VA-80BW
Wall mounting bracket
Use when installing the
camera to a wall.
VA-CM8C
Clear dome cover
for outdoor housing
(Sold separately)
VA-CM8S
Smoked dome cover
for outdoor housing
(Sold separately)
VA-80ME
In-ceiling type
VA-80EX
Outdoor type
In-ceiling bracket
Camera unit
with clear dome cover (standard)
(Smoked dome cover [VA-CZ80] option)
Camera unit
with clear dome cover (standard)
(Smoked dome cover [VA-CZ80] option)
Camera unit
Surface cover
Outdoor housing
IP66
Rated
VA-84S
Power supply base
VCC-MC800
VCC-MC700
VCC-MC600
VCC-MC500
VCC-MC800
VCC-MC700
VCC-MC600
VCC-MC500
VCC-MC800
VCC-MC700
VCC-MC600
VCC-MC500
VA-84S
Power supply base
VA-84S
Power supply base
VA-80AC
Corner mounting adaptor
Use with the VA-80BW when
installing the camera to a
surface such as the corner
of a wall.
VA-80AP
Pole mounting adaptor
Use with the VA-80BW when
installing the camera to a pole.
A wide selection of options is available—cove
for a match to the application of your choice. I
Page 7
Easy-to-Manage Installation,
Setup and Adjustment
Enclosed within the housing are an integrated lens, a motor and a
pan/tilt mechanism. Attachment to the power supply base by simply
sliding the release levers simplifies installation at the point of surveillance. The settings circuit board is detachable for access to protocol,
address and other switch settings, and the VAC-70 controller (sold
separately) and can be connected after installation to allow adjustment of PTZ control and other settings from an on-screen menu.
Model number codes
Camera type
8
36x, Day/night
7
36x, Color
6
30x, Day/night
5
30x, Color
Dome cover
C
Clear cover
S
Smoked cover
Power
0 0
AC24V
Housing type
I N
Surface cover
E M
In-ceiling
E X
Outdoor housing
Terminal side
(Side-A)
DIP switch side
(Side-B)
Alarm inputs (8)
Alarm outputs (2)
RS-485A/RS-485B
Address setting
Baud rate setting
RS-485/Coax setting
SSP/Pelco setting
Termination setting
Camera Unit/Power Supply Base
Mounting Brackets (Sold separately)
Housings (Sold separately)
VA-80EX
Outdoor Housing
VA-CM8C
Clear dome cover for outdoor housing
VA-CM8S
Smoked dome cover for outdoor housing
VA-CZ80
Smoked dome cover for indoor housing
VA-80F
Surface Cover
Dimensions Unit: mm (inch)
Model configurations example
Model name
VCC-9800EXC
VCC-9500EMC
VCC-9700INS
Camera unit
VCC-MC800
VCC-MC500
VCC-MC700
Power basement
VA-84S
VA-84S
VA-84S
Housing
VA-80EX
VA-80ME
VA-80F
Dome cover
VA- C M8 C
VA-CZ80
+++
VA-80ME
In-Ceiling Bracket
(closed type)
VA-80MF
In-Ceiling Bracket (open type)
ø192 (7.6)
ø109.7 (4.3)
ø190.2 (7.5)
ø28.5 (1.1)
ø216 (8.5)
101.1 (4.0)
111.5 (4.4)
ø216 (8.5)
51.3
(2.0)
152 (6.0)
162.5 (6.4)
Release
lever
ø248 (9.8)
ø146
(5.7)
ø224 (8.8)
Dome Cover
265.1 (10.4)
192 (7.6)
181.6 (7.1)
6 (0.2)
+
+
+
+
+
+
+
+
Slide the camera unit’s two release levers
and lock the power supply base into position. No special tools required for camera
unit installation or removal.
Safety Cable
Equipped with a safety
cable that connects the
housing and power supply base to prevent the
camera unit from falling.
Detachable Settings
Circuit Board
4-ø4.5 (0.2)
P.D ø168 (6.6)
ø137.4 (5.4)
ø147.5 (5.8)
ø186 (7.3)
ø136 (5.4)
57.3
(2.3)
107.2 (4.2)
191.5 (7.5)
VA-80BP
Pendant Mounting
Bracket
VA-80BW
Wall Mounting Bracket
VA-80A
Attachment
VA-80AP
Pole Mounting Adaptor
VA-80AC
Corner Mounting Adaptor
45 (1.8)
ø194 (7.6)
300 (11.8)
329 (13.0)
ø96 (3.8)
ø130 (5.1)
ø96.5 (3.8)
239.8 (9.4)
191.5 (7.5)
191 (7.5)
4-ø8.5 (0.3)
P.D ø101.6 (4.0)
45°
90˚
119 (4.7)
260.4 (10.3)
172.8 (6.8)
100 (3.9)
193 (7.6)
127 (5)
193 (7.6)
50 (2.0)
ø85–ø165 (3.3–6.5) (TBD)
Basic camera settings
can be made while holding the settings circuit
board in hand, as the
board is detachable from
the power supply base.
The I/O side of the board
features 8 input and 2
output terminals for
alarm signals.
Detachable without disconnecting of power cable
ring camera performance, housings, mounting brackets and more
—
nstallation work and maintenance is now easier than ever before.
Page 8
Outdoor housing
Power
consumption
(approx.)
Camera unit +
Power supply
base
TBD:
VCC-MC800+VA-84S TBD: VCC-MC700+VA-84S VCC-MC600+VA-84S16 W: VCC-MC500+VA-84S16 W:
35W: VA-80EX
36x, Day/Night Camera 36x, Color Camera 30x, Day/Night Camera 30x, Color CameraCamera type
Image compression
Resolution
Picture quality
Frame rate
Audio compression method
Microphone input
Audio output
Bandwidth
Alarm buffer
Interface
Protocols
Simultaneous access capacity
Security
Bundled software
Specifications
JPEG
720 x 480, 720 x 480DFFC*, 720 x 240, 640 x 480, 640 x 480DFFC*,
360 x 240, 180 x 120
5 levels
Max. 30 IPS (720 x 240)
G.711 (192 kbps), full duplex
–62 to –32 dB (monaural microphone) 3.5 mm mini jack
LINE OUT, monaural audio output, Max. –8 dB, 3.5 mm mini jack
128, 256, 512 Kbps, 1, 2, 3, 4 Mbps, no limitation
Up to 8 MB; configurable
10BASE-T/100BASE-TX (RJ45 connector)
TCP, UDP, HTTP, HTTPS, SMTP, NTP, DHCP, FTP, UPnP
Image: Max. 16, Voice: Max. 16 (admin: 1)
BASIC authentication (ID/password), SSL supported (image only)
VA-SW3050LITE
5.1 kg =VCC-9800EXC/9800EXS
Model No.
Scanning system
Image sensor
Picture elements
Horizontal resolution
Minimum
illumination
(approx.)
Electronic sensitivity boost
Video S/N ratio
Backlight compensation
White balance
Gain control
Electronic shutter
Zoom lens
Movement
range
Movement
speed
Motion detection
Synchronizing system
Communication
Protocols
Environmental
conditions
Power requirement
Weight (approx.)
NTSC standard 525 lines, 60 fields/sec.
1/4” (approx. 3.6 x 2.7 mm) interline transfer method CCD
Total: 811(H) x 508(V), Effective: 768(H) x 494(V)
520 TV lines
Auto (interlocked with auto iris), up to 32x / OFF
More than 50 dB (AGC OFF)
Auto focus
Auto / One-push / Manual
Backlight compensation
Centerweighted average metering/multi-spot evaluative metering
Privacy masking
ON / OFF, max. of 24 masked locations (Wide view screen; 1 screen max. 4 masks) All-around privacy masking
Preset positions
256 128
Alarm input/output
External inputs: 8, External outputs: 2, NO (Normal Open)/NC (Normal Closed) switch, Motion detection with external alarm AND/OR output options
Electronic sensitivity boosting
Auto / OFF, works with auto iris, settings up to 32x setting possible
Aperture
H/V setting possible
Day/night operation
Auto / Color / B/W settings Auto / Color / B/W settings— —
Iris control
Auto / Manual
ON / OFF, slide SW, ON = Multi-spot photometry (48-section) / 5-section photometry / Multi-spot masking (48-section)
ATW / AWC / Manual / Outdoor / Indoor / Fluorescent
LOW / NORMAL / MID / HIGH / OFF
ON (PRESET, ZONE) / OFF: Motion zoom function
Internal sync. / Line lock (LINE PHASE)
RS-485 / Coaxial control
SANYO, Pelco-D, Other (TBD)
35 to 90% RH
24 V AC, 60Hz
36x optical zoom, f = 3.4 to 122.4 mm (F1.6 to 4.5)
ON / OFF, up to 16x electronic zoom (Max. 576x combined with optical zoom)
30x optical zoom, f = 3.5 to 105 mm (F1.4 to 3.7)
ON / OFF, up to 16x electronic zoom (Max. 480x combined with optical zoom)
360° endless
–5 to 185° (digital auto flip ON)
Preset: 435°/sec., Manual: 0.1 to 120°/sec.
Preset: 400°/sec., Manual: 0.1 to 120°/sec.
1.0 lx (at F1.6, GAIN: HIGH, color mode)
0.05 lx, (at F1.6, B/W mode)
1.0 lx (at F1.6, GAIN: HIGH, color mode)
0.8 lx (at F1.4, GAIN: HIGH, color mode)
0.04 lx, (at F1.6, B/W mode)
0.8 lx (at F1.4, GAIN: HIGH, color mode)
0.4 lx (at F1.6, GAIN: HIGH, color mode)
0.02 lx, (at F1.6, B/W mode)
0.4 lx (at F1.6 GAIN: HIGH, color mode)
0.32 lx (at F1.4, GAIN: HIGH, color mode)
0.016 lx, (at F1.6, B/W mode)
0.32 lx (at F1.4, GAIN: HIGH, color mode)
High-speed mode: 8 steps: 1/60, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000
Low-speed mode: 5 steps: 2x, 4x, 8x, 16x, 32x (1/30, 1/15, 1/8, 1/4, 1/2)
Tilting
Panning
Tilting
Panning
–10 to 50°C (+14 to 122°F), –30 to 50°C (–22 to 122°F) when the outdoor housing, VA-80EX is used
Temperature
Humidity
Outdoor types
In-ceiling types
50 IRE
20 IRE
VA-80LAN Optional Network Board
Surface types
5.1 kg =VCC-9700EXC/9700EXS 5.1 kg =VCC-9600EXC/9600EXS 5.1 kg =VCC-9500EXC/9500EXS
2.4 kg =VCC-9800IN 2.4 kg =VCC-9700IN 2.4 kg =VCC-9600IN 2.4 kg =VCC-9500IN
3.4 kg =VCC-9800EM 3.4 kg =VCC-9700EM 3.4 kg =VCC-9600EM 3.4 kg =VCC-9500EM
Caution: Please consult the instruction manual to ensure safe and proper operation of the product.
Distributed by:
SANYO Electric Co., Ltd.
www.sanyosecurity.com
©2006 SANYO Printed in Japan ’06.12. MA.
SMS138
DI Company of SANYO Electric Co., Ltd.
obtained Quality Management System
ISO 9001 and Environmental Management
System ISO 14001 certifications.
EC00J0303
051
VCC-9800/9700/9600/9500
Regulatory
UL, FCC Class B
*DFFC: Dynamic Field/Frame Conversion
Motion detection and field/frame conversion are performed to enhance
the vertical resolution of images with no movement and reduce blurring
of moving objects in images with movement.
Microsoft and Windows are either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or other countries. Intel
and Pentium are trademarks or registered trademarks of Intel Corporation
or its subsidiaries in the U.S. and other countries. All other trademarks are
the property of their respective owners.
Note:
• Frame rates are variable dependant upon network line conditions and
PC performance.
• Because products and software described in this brochure are subject
to continuous improvement; SANYO reserves the right to modify
product specifications, functions and design without notice.
• Comparative images are representations only.
Loading...