Sanyo VCB-3384 User Manual

• 1/3-Inch CCD Image Sensor

(Approximately 410,000 Pixels)

• High-Resolution Picture. 570 Lines of Resolution

• Minimum Light Requirement:

0.07 Lux @ F1.2

• External Sync, Internal Sync/Line Lock

1/3” High Resolution

B/W CCD Camera

VCB-3384

(Shown with an Optional Lens)

VCB-3384

Features

• 1/3-Inch CCD Image Sensor, with approx. 410,000 picture elements.

•High Sensitivity, minimum required illumination is 0.07 Lux @ F1.2 Lens. (Incandescent lighting)

•High-Resolution. More than 570 Lines of Horizontal Resolution.

• Equipped with Electronic Iris.

• Backlight Compensation.

• External Sync. (VS) (75 Ohms/High Impedance, Selectable Internally)

• Line Lock/Internal Sync

• CS Mount Lens Compatible

• Flange-Back adjustable externally.

• Built-In Auto Iris Level control circuit for DC type Auto Iris lens.

• Both DC type and VIDEO type Auto Iris lenses applicable.

• 12V DC/24V AC operation.

•Versatile use and very compact.

• Metal cabinet.

• Low power consumption and quick start.

• No interference from magnetic or electrostatic field.

• Built-In Anti-Ground loop Isolation Transformer.

SANYO Security Products 21605 Plummer Street Chatsworth, CA 91311 Phone: (888) 893-7403 Fax: (888) 818-2597 Technical Support: (888) 66-SANYO www.sanyocctv.com

Scanning System Image Device Image Size Picture Element

Synchronizing System External Sync. Interlace Resolution Video Output Level Video S/N Level Minimum Illumination (Incandescent Lighting) Gamma Correction Backlight Compensation Lens Mount Flange-Back Adjustment Camera Mount Control

Sockets

Electronic Iris Range Light Control Auto Iris Output and Connection

Environmental Conditions

Power Indicator Power Requirement Power Consumption Dimensions (W x H x D)

Weight

EIA Standard: 525 lines, 30 Frames/Sec Interline Transfer Method CCD 1/3” (Approx. 4.8mm x 3.6mm) 811 (H) x 508 (V): All Picture Elements 768 (H) x 494 (V): Effective Picture Elements Line Lock/Internal Synchronization (Manually Switched)/External

1.0V p-p/75 Ohms Automatic PLL 2:1 Interlace Horizontal: 570 TV Lines

1.0 Vp-p (75 Ohms, Composite) More than 50 dB Scene: 0.07 Lux @ F1.2 Lens

0.45 Fixed ON/OFF, Manual Switching, Center Zone Light-Measuring System CS Mount

12.5mm

±0.5mm

1/4” - 20 UNC x 2 (Top/Bottom) V Phase Adjust. Line Phase VR (Rear) Lens Iris Level Level: L,H VR (Side) Lens Type E.I./DC/Video Slide Sw. (Side) Backlight Compensation BLC: ON/OFF Dip Sw. (Side) Video Video Out BNC External Sync. VS In BNC Auto Iris Lens Lens Out 4-Pin (Side) Power Supply 24V AC, GND 3-Pin Terminal

0.07 Lux to 42,000 Lux F1.2, Lens Electronic Iris or Optional Auto Iris Lens DC: Iris Control Coil Only Type Lens (Galvanometric Iris without Amplifier Type)

Drive Coil (+,-), Brake (Damp) Coil (+,-) Socket Pin No. 1 Brake Coil Socket Pin No. 2 Brake Coil

Socket Pin No. 3 Drive Coil

Socket Pin No. 4 Drive Coil VIDEO: DC Power & Video Signal Supply Auto-Iris Type Lens (With Amplifier Type) +12V DC (Max. 50mA), Video (High Impedance), Ground

Socket Pin No. 1

12V DC Socket Pin No. 2 NC Socket Pin No. 3 Video (1.0 Vp-p) Socket Pin No. 4 Ground (for Power)

Operating Temperature: 14°F to

122

°F (-10°C to 50°C)

Humidity: Within 90% RH

Storage Temperature: -4°F to

140

°F (-20°C to 60°C)

Humidity: Within 70% RH LED 24V AC / 60Hz, 12-15V DC Approx. 3.0W

(w/o Auto-Iris Lens)

2.24 x 1.77 x 4.78 inches (57 x 45 x 121.3mm) (w/o Lens Mount and Camera Mount)

0.53 lb (245g) (w/o Lens)

MODEL

VCB-3384

Specifications