SANYO STK4161V Datasheet
Ordering number: EN2135B
±
θ
°
°
°
−
°
±
8
Thick Film Hybrid IC
STK4161 V
AF Power Amplifier (Split Power Supply)
(35W + 35W min, THD = 0.08%)
Features
• Pin-compatible with the STK4102II series. The
STK4101V series use the same package and are available for output 15W to 50W.
Package Dimensions
unit: mm
4040
[STK4161 V ]
• Built-in muting circuit to cut off various kinds of pop
noise
• Greatly reduced heat sink due to substrate temperature
125 ° C guaranteed
• Distortion 0.08% due to current mirror circuit
• Excellent cost performance
Specifications
Maximum Ratings
Parameter Symbol Conditions Ratings Unit
Maximum supply voltage
Thermal resistance
Junction Temperature Tj 150
Operating substrate temperature Tc 125
Storage temperature Tstg
Available time for load short-circuit t
at Ta = 25 ° C
V
max
CC
j-c 2.1
30 to +125
*1 V
s
= ± 30.5V, R
CC
= 8 Ω , f = 50Hz, Po = 35W 2 s
L
46 V
C/W
C
C
C
Recommended Operating Conditions
Parameter Symbol Conditions Ratings Unit
Recommended supply voltage V
Load resistance R
CC
L
SANYO Electric Co., Ltd. Semiconductor Business Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN
at Ta = 25 ° C
30.5 V
Ω
70997HA (ID) / 8308TA No. 2135—1/8
STK4161 V
Operating Characteristics
Parameter Symbol Conditions min typ max Unit
Quiescent current Icco V
Output power
Total harmonic distortion THD Po = 1.0W, f = 1kHz 0.08 %
Frequency response f
Input impedance r
Output noise voltage V
Neutral voltage V
Muting voltage V
Notes. For power supply at the time of test, use a constant-voltage po w er supply
unless otherwise specified.
*1 For measurement of the available time for load short-circuit and output
noise voltage, use the specified transformer power supply shown right.
*2 The output noise voltage is represented by the peak value on rms scale
(VTVM) of average value indicating type. For AC power supply, use an
AC stabilized power supply (50Hz) to eliminate the effect of flicker noise
in AC primary line.
at Ta = 25 ° C, V
R
: non-inductive load
L
Po (1)
Po (2)
, f
L
H
i
*2 V
NO
N
M
= ± 30.5V, R
CC
= ± 36.5V 20 40 100 mA
CC
THD = 0.08%,
f = 20Hz to 20kHz
= ± 26.5V, THD = 0.2%,
V
CC
R
= 4 Ω , f = 1kHz
L
Po = 1.0W, dB 20 to 50k Hz
Po = 1.0W, f = 1kHz 55 k Ω
V
+0
–3
= ± 36.5V 1.2 mVrms
CC
= ± 36.5V –70 0 +70 mV
CC
= 8 Ω , VG = 40dB, Rg = 600 Ω ,
L
35 W
40 W
–2 –5 –10 V
Specified Transformer Power Supply
(Equivalent to RP-25)
Equivalent Circuit
No. 2135—2/8
Sample Application Circuit
STK4161 V
Sample Printed Circuit Pattern for Application Circuit
(Cu-foiled side)
Output power, Po - W
Total harmonic distortion, THD - %
Input voltage, Vi - mV
Output power, P
O
- W
No. 2135—3/8
Loading...