Sanyo SAP-K12AP, SAP-C12AP, SAP-C30AP, SAP-C18AP, SAP-K25AP User Manual

INSTRUCTION MANUAL

FIRST MADE FOR SAP-KC9,12,18,25,30AP

MATERIAL OR MODEL *PAPER-JO

DIMENSION OR MAKER WOODFREE 80gm

COLOR BLACK Print

EZIS4AETON

APPROVALS

N.Yamazaki

2010/Feb/1

CHECK
Tai C.S

2010/Feb/1

DESIGN

Tai C S

2010/Feb/1

DRAWN

REMARKS:

SAMS ONLY

1

ON.RSNOISIVERETADSLAVORPPA

PART CODE

85S-6-4181-007-00-0

PART NAME

EXPLANATORY BOOKLET

INSTRUCTION MANUAL

Split System Air Conditioner

INDOOOR UNIT OUTDOOR UNIT

COOL / DRY MODEL

SAP-K9AP

SAP-C9AP

SAP-K12AP SAP-C12AP

SAP-K18AP SAP-C18AP

SAP-K25AP SAP-C25AP

SAP-K30AP SAP-C30AP

HA1-PHA21K-PAS

Save These Instructions!

Pub. OI-85S64181007000 © SANYO 2010

SANYO Electric Co., Ltd.

Instruction Manual

Features

Features

This air conditioner is equipped with cooling and drying functions. Details on these functions are
provided below; refer to these descriptions when using the air conditioner.

24-hour Clock with ON/OFF
Program Timer

The remote control unit allows you
to set a wide variety of timer-based
operations including automatic
ON/OFF with timer setting, same­time ON/OFF every day, ON timer,
OFF timer and Combination timer.

Mild Dry

By coupling the compressor and
fan operation, intermittent drying
can be precisely controlled
according to room temperature so
that air is efficiently dehumidified.

Auto Clean

Fan operates when the unit is
stopped to prevent the generation
of mould and odors within the
indoor unit.

Automatic Fan Operation

Convenient microprocessor control
automatically adjusts fan speed to
High, Medium or Low, according to
room temperature to maintain a
comfortable airflow throughout the
room.

Air Sweep Control

The air sweep function moves the
flap up and down in the air outlet,
directing air in a sweeping motion
around the room and providing
comfort to every corner.

Automatic Restart Function for
Power Failure

Even when power failure occurs.
Preset programmed operation is
Reactivated once power resumes.

Humanized Sleep Function

Temperature gently rises or falls
automatically to maintain
comfortable room temperature and
saves energy.

Rapid Cooling

The high-efficient system makes
Cooling fast but still remains high
EER/COP.

Super Quiet

Specially-designed air vent
efficiently reduce noise.

Turbo

Cools the room intensely.

Self Diagnosis

Error code is displayed for fast and
easy maintenance, should a
problem occurs.

Low Voltage Startup (Min.198V)

The unit starts safely even when
the voltage is below the rated
voltage.

Child Lock

Remote controller keys are
lockable to prevent misoperation.

Blue Fin

Anti-corrosion blue fin is more
effective than a common coil.

1

Instruction Manual

Contents

Instruction Manual

Page

Features

...............................................

................................. 1

Operation and Maintenance

1. Notices for operation .............................................................

2. Notices for user .................................................................

3. Names and functions of each part .....................................

4. Operation of wireless remote control unit ..........................

5. Clean and care .................................................................

6. Troubleshooting ................................................................

Installation Service

7. Notices for installation ...........................................................

8. Installation dimension diagram . ........................................

9. Install indoor unit ..............................................................

10. Install outdoor unit ............................................................

11. Pump down .......................................................................

12. Check after installation and Test operation ......................

13. Self diagnosis function .....................................................

3
5
6

7
15
17

19
21
22
26

32
33

34

Product Information

If you have problems or questions concerning your Air Conditioner,
you will need the following information. Model and serial numbers
are on the nameplate on the bottom of the cabinet.

Model No. _______________Serial No. _____________________

Date of purchase _______________________________________

Dealer’s addres _______________________________________

Phone number_________________

Thank you for choosing SANYO air conditioner, please read
this instruction manual carefully before operating the unit
and keep it carefully for consultation.

Alert Symbols

The following symbols used in this manual, alert you to
potentially dangerous conditions to users, service personnel
or the appliance:

This symbol stands for the items should be forbidden.

This symbol stands for the items should be followed.

2

Operation and Maintenance

1. NOTICES FOR OPERATION

Each unit must be
properly grounded with a
ground (or earth) wire or
through the supply wiring.

If not, please ask the qualified
personnel to install.
Furthermore, do not connect
each wire to the gas pipe,water
pipe, drainage pipe or any other
improper places.

Don't leave windows and doors
open for a long time while operating
the air conditioner.

Don't attempt to repair the air

conditioner by yourself.

The wrong repair will lead to an
electric shock or fire, so you
should contact the SANYO
service center for repair.

Don't block the air intake or outlet
vents of both the outdoor and indoor
units.

Select the most appropriate

temperature.

Keep room
cooler than

outside about

o

5 C.

It can help to preclude the
electricity wasted.

Never use or store gasoline or
other flammable vapor or liquid
near the air conditioner.

It can decrease the air
conditioning capacity.

Please make sure whether
the installed stand is firm
enough or not.

If it is damaged, it may lead to
the fall of the unit and cause the
injury.

It can decrease the air conditioning
capacity or cause a malfunction.

Do not step on the top of the

outdoor unit or place things on it.

As falling off the outdoor unit can
be dangerous.

It is very dangerous and it may
cause a fire or explosion.

If abnormal phenomenon (like
burning odor, etc) occur, turn off
power supply and contact
SANYO service center.

Cut Off
Power

If abnormal phenomenon
Icontinues, the unit may be
damaged and cause electric
shock or fire.

3

Operation and Maintenance

1. NOTICES FOR OPERATION

Do not use the air conditioner for other
purposes,such as drying clothes,
preserving foods, etc.

Do not insert your hands or stick into
the air intake or outlet vents.

Do not place a space heater near the air
conditioner. CO toxicosis may occur as
a result of imcomplete burning.

Do not blow the wind to animals and
plants directly. It can cause a bad
influence to them.

Splashing water on the air conditioner
can cause electric shock or malfunction.

Do not apply the cold wind to the body
for a long time. It can cause the health
problems.

Adjusting the airflow direction correctly.

a) Horizontal:
The horizontal
airflow can be
adjusted by
moving the
louver with
your hand
to the left
or right.

Louver of left /
right direction.

b) Vertical:
The vetical air
flow can be
adjusted by
moving the flap

OPER

FAN

with the remote
control unit.
Use the SWING
button to set

Flap of upward /
downward position.

C

SWING

AM
ON

E

D
O
M

F
F
O
/

N

+

O

P
M
E
T

­P
M
E
T

G
N
I
W

S

K

N

C

A

O

L

F

C

F

P

F
E
E

O

-

L

T

S

+

N
O

E

-

M

I

T

T

L
E
C
N
A
C

­E
M
I
T

either the auto
sweep or set to the
recommended position.

4

2. NOTICES FOR USER

Operation and Maintenance

2.1 Working Principle &
Special Functions
for Cooling

2.2 Working Temperature Range

Temperature Indoor air temperature Outdoor air temperature

Max.

COOLING

Min.

Principle:

Air conditioner absorbs heat in the room and transmit to
outdoor and discharged, so that indoor ambient
temperature decreased. It's cooling capacity will decrease
by the increase of outdoor ambient temperature.

Anti-freezing Function:

If the units is running in COOL mode and in low
temperature, there will be frost formed on the heat
exchanger, when indoor heat exchanger temperature
decreased below 0 C, the indoor unit micro-computer will
stop compressor running and protect the unit.

32 °C DB / 23 °C WB

21 °C DB / 15 °C WB

o

52 °C DB / ---

21 °C DB / ---

The operating temperature range (outdoor temperature) for cooling unit is 21 °C ~ 52 °C.

2.3 The Conditions of Unit Can't Operate Normally.

In the following temp. range, the protection device may act, this may cause unit stop running.

Outdoor temperature

above

“COOL” running

“DRY” running

Under the relative humidity is above 80% ( doors and windows are opened) when cooling or
dehumidifying for a long time, there may have dew drip off near the air vent.

52°C 32°C

52°C

Outdoor temperature

below

21°C

18°C 32°C

Indoor temperature

above

5

S/n

)

cable

)

e c

l

)

)

er

)

)

dica

Cool

Dry

Fa

Ru

S

)

Wall Pipe

d T

)

e

)

e

Operation and Maintenance

3. NAMES AND FUCTIONS OF EACH PART

Indoor Unit

Air intake

(1)

(3)

(8)

(4)

(5)

Air outlet

Back side
of part (4)

(9)

(6) (7)

The pattern in displayer:

：Cool
：Dry
：Fan

：Run

：Set temp.

Air inlet

(2)

Wireless

remote control

Outdoor Unit

art Name
1
2

(3

4
5

6)Receiver
7

ower

mot

ront Panel

t

uide Louver

n

tor

ontro

(10)

n

n

et Temp.

8

9)

10
11

(12)

Air outlet

(11)

12)

n

ape

onnection Wir

Drainage Pipe

onnection Pip

6

Operation and Maintenance

4. OPERATION OF WIRELESS REMOTE CONTROL UNIT

4.1 Remote Control Unit (Display)

Displayed when
transmitting data

Displayed when setting
temperature

Displayed the clock

(1) Operation mode

AUTO ..........................

COOL ..........................

DRY.......... ....................

FAN .............................

Symbols

(4) Timer

(5) Sleep ..............................

(6) Confirmation of ..............

transmission

Displayed when setting
timer

24-hour ON Timer .........

ON

24hour OFF Timer .........

OFF

OPER

HEAT ............................

(Not for cooling only model)

(2) Fan speed

Automatic operation .....

HIGH ............................

MID...............................

LOW ............................

(3) Set temperature

16 – 30 °C

When set to 23 °C ...

7

AUTO

C

(7) Clock indication ............

(8) Sweep indication ............

(9) Light .............................

(10) Blow .............................

(11) Turbo ...........................

(12) TEMP ...........................

(13) Lock ............................

Operation and Maintenance

4. OPERATION OF WIRELESS REMOTE CONTROL UNIT

4.2 Remote Control Unit (Functions)

Signal Transmitter

Display

ON/OFF operation button

TEMP. setting button

FAN SPEED Selector button

CLOCK button

BLOW button

TURBO button

SLEEP button

Transmitter

Display

When you press the buttons on the remote control unit, the
mark appears in the display to transmit the setting changes to
the receiver in the air conditioner.

Information on the operating conditions is displayed while the
remote control unit is switched on. If the unit is turned off, only
CLOCK and TEMP was displayed.

MODE operation button

TEMP button

SWING button

TIMER ON button

TIMER OFF button

LIGHT button

OPER

ON/OFF operation

MODE selector button

(+) / (-) setting
buttons

LOCK / UNLOCK
button

TIMER ON button

TIMER OFF button

(AUTO)

(COOL)

(DRY)
(FAN)

(HEAT)

This button is for turning the air conditioner ON and OFF.

To select “AUTO” “COOL”, “DRY” or “FAN” mode.

: When choosed this setting, the air conditioner calculates
the difference between the thermostat setting and the room
temperature and to select suitable running method.
: The air conditioner makes the room cooler.
: The air conditioner reduces the humidity in the room.
: The air conditioner run the indoor fan only.
: NOT function for cooling only model.

+

: Press the (+) button to increase set temperature, continue
press 2 seconds for fast increasing set temperature.

-

: Press the (-) button to reduce set temperature, continue
press 2 seconds for fast reducing set temperature.

-

: Press the button at the same time to lock or unlock
wireless remote controller.

: The air conditioner starts at the set time.

: The air conditioner stops at the set time.

+

8

Operation and Maintenance

4. OPERATION OF WIRELESS REMOTE CONTROL UNIT

4.2 Remote Control Unit Functions (Continued)

FAN SPEED selector
button

TEMP button

NOTE

BLOW button

AUTO

: The air conditioner automatically decides the fan speeds.
: Low fan speed.
: Medium fan speed.
: High fan speed.

AUTO

Press to see set temperature or indoor temperature which show on
the indicator lamp according to customer requirement.

: Display the presetting temperature.
: Display the indoor ambient temperature (5 seconds)
It will display the ambient temperature for 5 seconds,

After 5s later, then will back to display the presetting
temperature.

: Current displaying status will not be changed.

No Icon : Default to display the pesetting temperature.

Press to begin or stop indoor fan from blowing indoor components
to dry. This function applicable to “COOL” & “DRY” mode only. In
“AUTO” & “FAN”, “BLOW” function can not be set up and there is
no “BLOW” displaying.

LIGHT button

TURBO button

SLEEP button

CLOCK Button

SWING Button

Press this button will turn ON / OFF the display of indicator light.

Press to quickly cool or heat the room with intense cool or hot air.

For details, see “SLEEP MODE” (P.g 12). When you press this
button in the“DRY” or “COOL” mode, the mark appears in the
display, and the remote control unit will automatically adjust the set
temperature to save energy.

Use this button to set the clock.

How it Works?

Press clock button, signal blink and display. Within 5 seconds,
the value can be adjusted by pressing “+” or “-” button, if press this
button continuously for 2 seconds and above, in every 0.5 seconds,
the value on ten place of Minute will be increased 1. During
blinking, repress the Clock button, signal will be constantly
displayed and it denotes the setting succeeded. After powered on,
12:00 is defaulted to display and signal will be displayed. If there
is signal be displayed that denotes the current time value is
Clock value, otherwise it is a Timer value.

To set the air swing direction which circurlarly change as:

OFF

NOTE

9

When the guide louver start to swing up and down, if turn off
the Swing, the air guide louver will stop at the current
position. (refer P.g 13 for more detail)

Operation and Maintenance

4. OPERATION OF WIRELESS REMOTE CONTROL UNIT

4.3 Using the General Operation

NOTE

STEP 1

STEP 2

STEP 1

STEP 3

STEP 4

Press the setting buttons as described below and change the settings
as desired.

To start the air conditioner, press the ON/OFF operation button.

Press the MODE selector button and select the desired mode.
For DRY operation
For COOLING operation
For FAN only operation
For AUTO operation
For HEATING operation

→
   →

    →

   →

→

(Not function for cooling only model)

STEP 2

STEP 5

STEP 3

STEP 4

NOTE

STEP 5

Press the TEMP. setting buttons to change the temperature setting
to the desired temperature.
Adjustable temperature range:
30 °C (86 °F) max.—16 °C (61 °F) min.
Under “AUTO” operation, the temperature can not be adjust.
Under other operation, the initial value is 25 °C (77 °F).

Set the FAN SPEED selector button to the setting you want.

AUTO

Under Dry mode, the fan speed is automatically set to LOW.

Press the
automatically

To STOP the air conditioner, press the ON/OFF operation button again.

: Auto fan speed.
: Low fan speed.

: Middle fan speed.
: High fan speed.

button and set the air blow direction as desired or



.

10