Page 1
Specifications
Product Number
System
Optical System
LCD Panel
Projection Lens
Light Source
Screen Size (Projection Distance)
Color Reproducibility
Brightness*1
Uniformity
Contrast Ratio*2 (Full On/ Full Of f)
Sound Output (Speakers)
Scanning Frequency
Resolution (resizing)
(When using RGB signal)
Terminals
Operating Temperature
Power Source
Power Consumption
Dimensions (W x H x D)
Weight
Main Accessories
Replacement Lamp type No: POA-LMP125(610 342 2626)
Size
Drive System
Pixel Count
Pixel Array
PC
Input/ Output
Video/ Audio
Input/ Ou tput
Controller
input/ outp ut, and other
PLC-WTC500L
RGB liquid crystal shutter protectio n system
Dichroic mirror separation / Prism synthesis system
0.95 inch x 3, Aspect Ratio 16:10
Polysilicon TFT Active Iris
1,024,000 (1280 x 800) x 3 ; Total pixels 3,072,000
Stripe
Lenses sold separate ly
330 W NSHA Lamp (1 lamp + 1 lamp)
Minimum 30” - Maximum 300” (Projection distance differs by lens)
Full color (16.77 million colors)
5,000 lumens
90 %
3,000:1
3.0 W + 3.0 W S tereo Speakers ( 5 x 9 cm x 2)
Horizontal: 15-100 KHz, Vertical: 50-100 Hz, Dot Clock: 140 MHz or less (analog)
1280 x 800 (UXGA dot resizing possible)
Analog RGB input x 1; Mini D-sub 15-pin x 1, BNC 5-type x 1
Digital video input ( x 1 ); HDMI x 1
Analog RGB output x 1; Mini D -sub 15-pin x 1
Audio input x 2; Stereo min i-jack x 2 (Computer/ Component)
Video x 3 ; RCA input, BNC 3-typ e (same as PC input terminal), S-Video
Audio input x 2 ; RCA-type x 2
Audio monitor output x 1 ; RCA (can be used with either computer or video)
Service port ; Mini DIN 9-pin x 1 (for service-use), USB Co nnector x 1 (B Series)
Wired remote control port ; Mini-jack x 1, PJ Net Organizer Conn
5 - 40 °C
AC 100 - 120 V, AC 200 - 2
530 W, 420 W in "Eco1" lamp mo de (Standby: approx 14 W)
451.0 x 175.0 x 550.1 mm (17.8 x 6.9 x 21.7 inc h )
14.7kg (32.4lbs)
Wireless remote control (AAA battery x 2),
Removable power cord, USB cable, Computer cable,
Owner’s manual (Quick manual, CD-ROM), PIN code-locking seal
40 V (±10 ° C), 50/ 60 Hz
ector x 1
PLC-XTC50L
RGB liquid crystal shutter protection system
Dichroic mirror separation / Prism synthesis system
1.0 inch x 3, Aspect Ratio 4:3
Polysilicon TFT Active Iris
786,432 (1024 x 768) x 3 ; Total pixels 2,359,296
Stripe
Lenses sold separately
330 W NSHA Lamp (1 lamp + 1 lamp)
Minimum 30” - Maximum 300” (Projection distance differs by lens)
Full color (16.77 million colors)
5,000 lumens
90 %
1,100:1
3.0 W + 3.0 W Stereo Speakers ( 5 x 9 cm x 2)
Horizontal: 15-100 KHz, Vertical: 50-10 0 Hz, Dot Clock: 140 MHz or less (analog)
1024 x 768 (UXGA dot resizing possible)
Analog RGB input x 1; Mini D-sub 15-pin x 1, BNC 5-type x 1
Digital video input ( x 1 ); DVI-D x 1
Analog RGB output x 1; Mini D-sub 15-pin x 1
Audio input x 2; Stereo mini-jack x 2 (Computer/ Component)
Video x 3 ; RCA input, BNC 3-type (same as PC input terminal), S-Video
Audio input x 2 ; RCA-type x 2
Audio monitor output x 1 ; RCA (can be used with either computer or video)
Service port ; Mini DIN 9-pin x 1 (for service-use), USB Connector x 1 (B Series)
Wired remote control port ; Mini-jack x 1, PJ Net Organizer Connector x 1
5 - 40 °C
AC 100 - 120 V, AC 200 - 240 V (±10 °C), 50/ 60 Hz
550 W, 440 W in "Eco1" lamp mode (Standby: approx 20 W)
451.0 x 175.0 x 550.1 mm (17.8 x 6.9 x 21.7 inch )
14.7kg (32.4lbs)
Wireless remote control (AAA battery x 2),
Removable power cord, USB cable, Computer cable,
Owner’s manual (Quick manual, CD-ROM), PIN code-locking seal
WXGA / XGA Multimedia Projector
PLC-WTC500L
PLC-XTC50L
Major Options
Optional Lenses
LNS-S11
Standard Zoom Lens
1.6 - 2.1 : 1
33 - 43 mm( 1. 3 -1.7")
10 : 0 - 1 : 1
13 : 7 - 7 : 13
Yes Yes
1.7 - 2.1
0.825 kg(1.8 lbs)
1.3(4.3)
1.7(5.7)
2.0(6.6)
2.6(8.7)
2.7(8.9)
3.5(11.6)
4.5(14.6)
6.7(22.1)
9.0(29.5)
11.3(36.9)
13.5(44.4)
1.3(4.3)
1.7(5.6)
2.0(6.6)
2.5(8.2)
2.6(8.5)
3.4(11.2)
4.3(14.1)
6.5(21.3)
8.7(28.5)
10.0(32.8)
10.0(32.8) 13.1(43.0)
10.0(32.8)
-
LNS-W10
Wide Zoom Lens
1. 2 - 1.6 : 1
25 - 33 mm( 1. 0 -1.3")
10 : 0 - 1 : 1
Yes
2.3 - 2.6
0.95 kg(2.1 lbs)
1.3(4.2)
2.0(6.6)
2.6(8.6)
3.3(10.8)
3.4(11.2)
5.0(16.3)
5.2(17.0)
6.6(21.8)
6.9(22.8)
8.3(27.3)
8.7(28.5)
10.4(34.3)
1.3(4.3)
1.9(6.2)
2.6(8.5)
3.3(10.8)
3.3(10.8)
4.9(16.1)
5.0(16.4)
6.6(21.7)
6.7(22.0)
7.6(24.9)
8.4(27.6)
-
Part Number
Type
Image
Throw Distance
Focal Length
Lens Shift U/D
Lens Shift L/R
Motor Driven
F Value
Net Weight
WTC500L Throw distance (unit: m (feet))
Unit LNS-W10 LNS-S11 LNS-T10 LNS-T11
40"
60"
80"
100 "
150"
200"
250"
300"
XTC50L Throw distance (unit: m (feet))
Unit LNS-W10 LNS-S11 LNS-T10 LNS-T11
40"
60"
80"
100 "
150"
200"
250"
300"
*1 Brightness when using the LSN-S11 lens *2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards..
*Specifications as of May 29, 2009, subject to change.
LNS-W11
Wide Fixed Lens
0.8 : 1
16.51 mm(0.7")
1 : 1
1 : 1 13 : 7 - 7 : 13
No
2.3
1.0 kg(2.2 lbs)
LNS-W11
Fixed Wide Tele Wide Tele Wide Tele Wide Tele
-
0.99(3.25)
1.34(4.40)
1.69(5.55)
2.57(8.43)
LNS-W11
0.96(3.15)
1.29(4.23)
1.63(5.35)
2.48(8.14)
1.0(3.3)
1.5(5.0)
2.1(6.8)
2.6(8.5)
3.9(12.8)
-
5.2(17.2)
-
6.6(21.5)
-
7.9(25.9)
Fixed Wide Tele Wide Tele Wide Tele Wide Tele
-
1.0(3.3)
1.5(4.9)
2.0(6.6)
2.5(8.2)
3.8(12.5)
-
5.1(16.7)
-
6.3(20.0)
-
Long Zoom Lens
43 - 69 mm(1.7 -2.7" )
1.7(5.6)
2.6(8.6)
3.5(11.6)
4.4(14.6)
6.7(22.0)
9.0(29.5)
11.2(36.9)
13.5(44.3)
1.7(5.6)
2.5(8.2)
3.4(11.2)
4.3(14.1)
6.5(21.3)
8.7(28.5)
10.9(35.8)
LNS-T10
2.1 - 3.4 : 1
10 : 0 - 1 : 1
13 : 7 - 7 : 13
2.0 - 2.6
1.0 kg(2.2 lbs)
2.9(9.4)
4.3(14.2)
5.8(19.0)
7.3(23.9)
10.9(35.9)
14.6(48.0)
18.3(60.1)
22.0(72.1)
2.8(9.2)
4.2(13.8)
5.6(18.4)
7.0(23.0)
10.6(34.8)
13.1(43.0)
13.1(43.0)
LNS-T11
Long Zoom Lens
3.4 - 5.4 : 1
69.1 - 109.2 mm( 2.7 - 4.3" )
10 : 0 - 1 : 1
13 : 7 - 7 : 13
Yes
2.1 - 2.52
1.1 kg(2.4 lbs)
2.9(9.6)
4.3(14.2)
5.7(18.8)
7.1(23.4)
10.6(34.9)
17.0(55.8)
14.2(46.4)
22.6(74.3)
17.7(58.0)
28.3(92.7)
21.2(69.5)
33.9(111.2)
2.6(8.5)
4.0(13.1)
5.3(17.4)
6.7(22.0)
10.8(35.4)
10.1(33.1)
16.3(53.5)
13.5(44.3)
21.7(71.2)
16.9(55.4)
27.2(107.0)
20.3(66.6)
32.6(107.0)
4.6(15.1)
6.9(22.5)
9.1(29.9)
11.4(37.3)
4.3(14.1)
6.4(21.0)
8.6(28.2)
Terminals
L005CTW-CLP
External dimensions (unit: mm (inch))
451.0(17.8)
87.3
(3.4)
160.0
15.0
13.0(0.5)
449.6(17.7)
94.0(3.7)
392.0(15.4)
(1.7)
550.1(21.7)42.0
175.0(6.9)
(8.4)
(4.9)
213.3
124.0
(6.3)
(0.6)
PLC-XTC50L
396.0(15.6)
77.9(3.1)
23.1(0.9)
3.5
°
141.0
141.0
(5.6)
100.0
100.0
(3.9)
(3.9)
392.0(15.4)
(5.6)
275.5(10.9)
(3.2)
80.0
4-M6
Caution: Please consult the instruction manual to ensure safe and proper operation of the product.
SANYO Presentation Technologies
Toll free:
888-337-1215 www.sanyoprojectors.com
© 2009 SANYO North America Corporation.
The Lamp Selection
System Brings
High Reliability
Page 2
Easier maintenance and highly functional projector, It automatically switches lamps. Accommodates all installation needs and has advanced networking capabilities.
High Image Quality
PLC-WTC500L
Durable Inorganic Optical System (D.I.O.S.)
16:10 wide-screen aspect ratio LCD panels
Durable In-organic Optical System provides a more
durable projector to handle many extended hour applications and
high-quality, high-contrast (3000:1) image presentations.
PLC-XTC50L
High reliable optical compensator
4:3 aspect ratio LCD panels
An optical compensator that has excellent light
and heat resistance is used to achieve a long service life for the
optical block and dramatically increase reliability.
High Reliability
1
Industry's first
maintenance necessary for approximately 6,000 hours
The foundation of 2-lamp model projector has developed
*
lamp selection system: No lamp
Lamp Selection System
2
*
Lamp 1 : 330W Lamp Lamp Selection Mirror Lamp 2 : 330W Lamp
with the "high precision optical axis adjustment technology".
The technology was further evolved to enable the mirror to
automatically select the lamp using a control motor. Lamp
selection system makes approximately 6,000 hours
2
*
of
projection possible, or twice as long as conventional
one-lamp models. When the first lamp is worn-out before
the expected time, the lamp selection mirror automatically
rotates and the second lamp starts the projection. This will
avoid the interruption of the presentation due to the
unexpected lamp failure.
Alternating mode
If the lamp is used for more
than 10 hours at one time,
then the lamp is automatically
switched upon powering up
the next time.
Relay mode
"Relay Mode" uses one
lamp to recommended
lamp replacement time,
3
*
Lamp Selection System Mode
Alternating mode
Lamp 1 in use
Total:
6,000 hours *
Lamp 2Lamp 1
10 hours
2 lamps can be replaced at one time No need for emergency lamp replacement
2
Lamp 2 in use
Lamp 2 Lamp 1
Relay mode
Lamp 1 in use
~3,000 hours*
Total:
6,000 hours *
2
Lamp 2 Lamp 1 Lamp 2 Lamp 1
When lamp 1 is fully used worn-out
2
Lamp 2 in use
~3,000 hours*
2
then switches lamps.
Auto Lamp Selection System for 24/7 Continuous Operation
This optional lamp extension method utilizes SANYO’s PJ Net Organizer (not included). You can schedule the rotation of the lamps. Once the
timer schedule has been set, the PJ Net will automatically rotate the lamps. In order to use the projector for 24/7 continuous operation, the
timer must be set to switch lamps every 24 hours. 24/7 continuous operation is useful for signage, advertising and information boards.
Easy Maintenance
Versatile Installation
Power Vertical / Horizontal Lens Shift
*
Featuring both vertical and horizontal lens shift (vertical: 0 to 50 %,
horizontal: ±15 % (maximum)), the PLC-WTC500L/XTC50L enable
intuitive operation for easy on-site setup.
Vertical Installation
The PLC-WTC500L/XTC50L can also
be installed to project images
upward or downward.
15%
*When shifting horizontally and vertically at the
same time, brightness may be reduced in the
corners of the screen.
Interchangeable Lenses (Option)
The existing XT-series lenses can be used just as they are. Lens removal and attachment are also very easy.
LNS-W11 LNS-W10 LNS-S11 LNS-T11LNS-T10
15%
50%
Standard
screen position
Shiftable range
Network Control
PJ-Net Organizer (option)
To use the PJ-Net technology, simply attach
POA-PN03C
(option)
the PJ-Net Organizer to the projector.
PJ Master (option)
The PJ Master software allows centralized
control of PJ-Net Organizer-mounted
projectors over a network. Install PJ Master
on your PC or server.
PJ-Net Organizer Usage Example
Install the
PJ Master
Software
PC or Server
Projectors connected by the PJ-Net
Organizer let you access the following
advanced centralized control functions.
*Monitoring the internal temperature of the projector *Notification of lamp-related information (e.g.
malfunction, operating hours, etc.) *Comprehensive management of network-connected projectors
*Database applications for all acquired data
Network Capture Function Web-based Management
Network Viewer Function E-mail Alert Function Sends Messages
Control of each projector
Video transmission cable
PJ Master
LAN cable
Hub/ Router
LAN cable
PJ-NetPJ-Net
Useful Features
15%
*Lenses are sold as options.
When shifted the
maximum
amount to the left
50%
When shifted the
maximum
amount upward
15%
When shifted the
maximum
amount to the right
Image distribution
server
Video
transmission
cable
Switcher
PJ-Net
Active Maintenance Filter (AMF)
Actual use time: Long life at 13,000 hours*
2
(Cartridge cycle: approx. 2 years*4)
The filter sensor detects the intake
airflow volume, and scrolls a clean filter
surface when the filter becomes soiled.
Detects clogs ·Controlled Scrolling
1. Sensor detects air flow
POA-FIL-100
One-Way Cooling Mechanism (Intake x1, Exhaust x1)
Intake and exhaust ports have been
eliminated from various places on the
projector (such as the bottom surface)
and concentrated into one intake and one
exhaust, to solve dust-related problems
(and improve cooling performance).
Easier Lamp Replacement
Lamp replacement has been simplified
to make maintenance easier.
2. Detects Clogs
3. Automatically
scrolls to new filter
Easy removal and replacement of the lamp from the Top.
*1 For projectors, as of May 27, 2009 *2 When in ECO1 mode *3 When changing other lamp,
the image is interrupted several tens of seconds. *4 Calculation based on 14 hrs/ day projector
use Based on JIS D-0207 accelerated testing environment conditions) * Replacement time
listed here is an educated estimate
Exhaust
(one place)
Intake
(one place)
Mechanical shutter
There’s also a Mechanical Shutter System
which is popular for a variety of elite
professional uses. The amazing
PLC-WTC500L/XTC50L fill the needs of a host
of demanding business venues including
meetings, entertainment and promotional
applications. It’s a super nova in a star-studded
selection of SANYO Portable projectors.
Silence Design (31dB, in ECO1 mode)
(ex) closing of a presentation
The operating noise is hardly noticeable even in
quiet settings like conference or AV rooms.
Built-in Test Pattern
Makes on-site setup easier by serving as a guide for setting
adjustments. (Includes a total of 8 built-in patterns).
WXGA/XGA Multimedia Projector
PLC-WTC500L/PLC-XTC50L
Brightness of 5,000 lumens
Loading...