Sanyo PLC-XM80 User Manual

Download

Multimedia Projector

MODEL PLC-XM80

PLC-XM80L

◊

Network Supported

Refer to the Owner's Manual below for details about network function.

Network Set-up and Operation

◊

Projection lens is optional.

Owner’s Manual

Features and Design

This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 1.07 billion colors, and matrix liquid crystal display (LCD) technology.

t Functionally Rich

This projector has many useful functions such as lens shifting, ceiling and rear projection, perpendicular omnidirectional projection, variety of lens options, etc.

t Multi-use Remote Control

Use the remote control as wired and wireless, or as a PC wireless mouse. Eight remote control codes and selectable pointer shapes are also available.

t Simple Computer System Setting

The projector has the Multi-scan system to conform to almost all computer output signals quickly (p.36). Supported resolution up to WUXGA.

t Useful Functions for Presentation

Digital zoom function allows you to focus on the crucial information during a presentation (pp.29,

43).

t Security Function

The Security function helps you to ensure security of the projector. With the Key lock function, you can lock the operation on the side control or remote control (p.59). PIN code lock function prevents unauthorized use of the projector (pp.59-60).

t Power Management

The Power management function reduces power consumption and maintains lamp life (p.57).

t Motor-driven Lens Shift

Projection lens can be moved up, down, right and left with the motor-driven lens shift function. This function makes it easy to provide projected image where you want. Zoom and focus can also be adjusted with a motor-driven operation. (p.27)

t Multilanguage Menu Display

Operation menu is available in 12 languages; English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Russian, Chinese, Korean, and Japanese (p.51).

t Logo Function

The Logo function allows you to customize the screen logo (pp.52-54). You can capture an image for the screen logo and use it for the starting-up display or between presentations.

t Pointer Function

Remote control pointer function. This function helps you to make a smart presentation on a projected screen.

t Multiple Interface Terminals

The projector has several interface terminals that can support various types of equipment and signals (p.11).

t Closed Caption

This is a printed version of the program sound or other information displayed on the screen. You can turn on the feature and switch the channels (p.61).

PNote:

• The On-Screen Menu and figures in this manual may differ slightly from the product.

• The contents of this manual are subject to change without notice.

Table of Contents

Features and Design ...............2

Table of Contents .................. 3

To The Owner .....................4

Safety Instructions.................5

Air Circulation 6 Installing the Projector in Proper Directions 7 Moving the Projector 8 Cautions in Handling the Projector 8

Compliance.......................9

Part Names and Functions .........10

Front 10 Back 10 Bottom 10 Rear Terminal 11 Side Control and Indicators 12 Remote Control 13 Remote Control Battery Installation 15 Remote Control Receivers and Operating Range 15 Wired Remote Control Transmitter 15 Remote Control Code 16 Adjustable Feet 16

Installation.......................17

Positioning the Projector 17 Lens Shift Adjustment 17 Lens Installation 18 Connecting to a Computer (Digital and Analog RGB) 19 Connecting to Video Equipment (Video, S-video) 20 Connecting for Audio Signal 21 Connecting the AC Power Cord 22

Basic Operation .................. 23

Turning On the Projector 23 Turning Off the Projector 24 How to Operate the On-Screen Menu 25 Menu Bar 26 Operating with Projector Control 27 Sound Adjustment 28 Operating with Remote Control 29 Keystone Correction 31 Pointer Function 32 Wireless Mouse Operation 32

Input Selection ................... 33

Direct Operation 33 Computer Input Source Selection 34 Video Input Source Selection 35

Computer Input...................36

Computer System Selection 36 Auto PC Adjustment 37 Manual PC Adjustment 38 Image Level Selection 40 Image Adjustment 41 Screen Size Adjustment 42

Video Input ...................... 45

Video System Selection 45 Image Level Selection 46 Image Adjustment 47 Screen Size Adjustment 49

Setting .......................... 51

Setting 51

Maintenance and Care ............. 63

Filter Instructions 63 Replacing the Filter Cartridge 64 Resetting the Filter Counter 65 Lamp Replacement 66 Cleaning the Projection Lens 68 Cleaning the Projector Cabinet 68 Warning Indicators 69

Appendix........................70

Troubleshooting 70 Menu Tree 73 Indicators and Projector Condition 76 Compatible Computer Specifications 79 Technical Specifications 81 Optional Parts 82 Lens Replacement 82 PJ Link Notice 82 Configurations of Terminals 83 PIN Code Number Memo 84 Dimensions 85 Serial Control Interface 86

Trademarks

Each name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation.

To The Owner

Before installing and operating the projector, read this manual thoroughly. The projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintains it in good condition for many years to come. Improper operation may result in not only shortening the product life, but also malfunctions, fire hazard, or other accidents. If your projector seems to operate improperly, read this manual again, check operations and cable connections and try the solutions in the “Troubleshooting” section in the back of this manual. If the problem still persists, contact the dealer where you purchased the projector or the service center.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICA TES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE OWNER'S MANUAL WITH THIS UNIT.

WARNING: l THIS APPARATUS MUST BE EARTHED. l TO REDUCE THE RISK OF FIRE OR

– This projector produces intense light from the projection

lens. Do not stare directly into the lens, otherwise eye damage could result. Be especially careful that children do not stare directly into the beam.

– Install the projector in a proper position. Otherwise it may

result in a fire hazard.

– Allowing the proper amount of space on the top, sides,

and rear of the projector cabinet is critical for proper air circulation and cooling of the unit. The diagrams shown here indicates the minimum space required. If the projector is to be built into a compartment or similarly enclosed, these minimum distances must be maintained.

– Do not cover the ventilation slots on the projector. Heat

build-up can reduce the service life of your projector, and can also be dangerous.

0.7’(20cm)

1.5’(50cm) 3’(1m) 3’(1m)

– If the projector is unused for an extended time, unplug the

projector from the power outlet.

– Do not project the same image for a long time. The

afterimage may remain on the LCD panels by the characteristic of panel.

Safety Precaution

ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

SIDE and TOP REAR

FOR EU USERS

The symbol mark and recycling systems described below apply to EU countries and do not apply to countries in other areas of the world. Your product is designed and manufactured with high quality materials and components which can be recycled and/or reused. The symbol mark means that electrical and electronic equipment, batteries and accumulators, at their end-of-life, should be disposed of separately from your household waste.

Note: If a chemical symbol is printed beneath the symbol mark, this chemical symbol means that the battery or accumulator contains a heavy metal at a certain concentration. This will be indicated as follows: Hg: mercury, Cd: cadmium, Pb: lead In the European Union there are separate collection systems for used electrical and electronic equipment, batteries and accumulators. Please, dispose of them correctly at your local community waste collection/recycling centre.

Please, help us to conserve the environment we live in!

READ AND KEEP THIS OWNER’S MANUAL FOR LATER USE.

CAUTION ON HANGING FROM THE CEILING

DO NOT SET THE PROjECTOR IN GREASy, WET, OR SMOKy CONDITIONS SUCH AS IN A KITCHEN TO PREVENT A BREAKDOWN OR A DISASTER. IF THE PROjECTOR COMES IN CONTACT WITH OIL OR CHEMICALS, IT MAy BECOME DETERIORATED.

CAUTION

Not for use in a computer room as defined in the Standard for the Protection of Electronic Computer/ Data Processing Equipment, ANSI/NFPA 75.

Safety Instructions

All the safety and operating instructions should be read before the product is operated.

Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.

Follow all warnings and instructions marked on the projector. For added protection to the projector during a lightning storm,

or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage due to lightning and power line surges.

Do not expose this unit to rain or use near water... for example, in a wet basement, near a swimming pool, etc...

Do not use attachments not recommended by the manufacturer as they may cause hazards.

Do not place this projector on an unstable cart, stand, or table. The projector may fall, causing serious injury to a child or adult, and serious damage to the projector. Use only with a cart or stand recommended by the manufacturer, or sold with the projector. Wall or shelf mounting should follow the manufacturer's instructions, and should use a mounting kit approved by the manufacturers.

An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

This projector should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied, consult your authorized dealer or local power company.

Do not overload wall outlets and extension cords as this can result in fire or electric shock. Do not allow anything to rest on the power cord. Do not locate this projector where the cord may be damaged by persons walking on it.

Do not attempt to service this projector yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

Unplug this projector from wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the projector. c. If the projector has been exposed to rain or water. d. If the projector does not operate normally by following

the operating instructions. Adjust only those controls that are covered by the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the projector to normal operation.

e. If the projector has been dropped or the cabinet has been

damaged.

f. When the projector exhibits a distinct change in

performance-this indicates a need for service.

When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or injury to persons.

Slots and openings in the back and side of the cabinet are provided for ventilation, to ensure reliable operation of the equipment and to protect it from overheating.

The openings should never be covered with cloth or other materials, and the bottom opening should not be blocked by placing the projector on a bed, sofa, rug, or other similar surface. This projector should never be placed near or over a radiator or heat register.

This projector should not be placed in a built-in installation such as a book case unless proper ventilation is provided.

Never push objects of any kind into this projector through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the projector.

Do not install the projector near the ventilation duct of airconditioning equipment.

Upon completion of any service or repairs to this projector, ask the service technician to perform routine safety checks to determine that the projector is in safe operating condition.

NOTE FOR CUSTOMERS IN THE US

Hg LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS.

Safety Instructions

Openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered.

CAUTION

Hot air is exhausted from the exhaust vent. When using or installing the projector, the following precautions should be taken. – Do not put any flammable object or spray can near the

projector, hot air is exhausted from the air vents.

– Keep the exhaust vent at least 3’ (1 m) away from any

objects.

– Do not touch peripheral parts of the exhaust vent,

especially screws and metallic parts. These areas will become hot while the projector is being used.

– Do not put anything on the cabinet. Objects put on the

cabinet will not only get damaged but also may cause fire hazard by heat.

Cooling fans are provided to cool down the projector. The fans’ running speed is changed according to the temperature inside the projector.

Air Circulation

IMPORTANT!

Filter Maintenance!!

The projector uses a lamp which generates significant heat. The cooling fans and air vents are provided to dissipate the heat by drawing air into the housing and the filter is located in the intake vents to prevent dust from getting inside of the projector.

In order to care for the projector appropriately, regular cleaning is required. Remove any dirt or dust that has accumulated on the projector.

If the projector reaches a time set in the timer setting, a Filter warning icon (Fig. 1) appears on the screen and WARNING FILTER indicator on the top panel lights up (see below), indicating that the filter replacement is necessary.

Blocking the air vents and leaving the projector uncleaned for a long time may not only damage the projector and may require costly repairs but may also cause accidents or fire.

For maintenance of the filter, refer to “Filter counter” on page 62 and “Maintenance and Care” on pages 63-65.

Air Intake Vent

Exhaust Vent (Hot air exhaust)

Air flow

Damages to the projector caused by using an uncleaned filter or improper maintenance will void the warranty on the projector.

Top Panel

Fig. 1 Filter warning icon

WARNING FILTER indicator

10˚

Safety Instructions

Installing the Projector in Proper Directions

Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe accident or fire hazard. This projector can project the picture in upward, downward, or inclined position in perpendicular direction to the horizontal plane. When installing the projector in downwardly inclined position, install the projector bottom side up.

PNote:

To inverse or reverse the image, set the ceiling function to On. (pp. 44, 50)

Positioning Precautions

Avoid positioning the projector as described below when installing.

Do not tilt the projector more than 10 degrees from side to side.

Do not put the projector on either side to project an image.

10° 10°

10°

In upward projection, do not tilt the projector over 10 degrees right and left.

In downward projection, do not tilt the projector over 10 degrees right and left.

CAUTION ON CEILING MOUNTING

For ceiling mounting, you need the ceiling mount kit designed for this projector. When not mounted properly, the projector may fall, causing hazards or injury. For details, consult your dealer. The warranty on this projector does not cover any damage caused by use of any non-recommended ceiling mount kit or installation of the ceiling mount kit in an improper location.

Safety Instructions

Notes on protector Remove the protector on the lens before use, and keep it for later use. For

transportation, press and hold the LENS button or LENS SHIFT button to adjust the lens to the central position when four arrows turn to red, and then attach the protector to protect the lens. (Only for PLC-XM80).

Use the handle grip when moving the projector.

Retract the adjustable feet to prevent damage to the lens and cabinet when carrying.

When this projector is not in use for an extended period, put it into a suitable case to protect the projector.

Moving the Projector

Protector

CAUTION IN CARRyING OR TRANSPORTING THE PROjECTOR

– Do not drop or bump the projector, otherwise damages or malfunctions may result. – When carrying the projector, use a suitable carrying case. – Do not transport the projector by courier or any other transport service in an unsuitable transport case. This

may cause damage to the projector. For information about transporting the projector by courier or any other transport service, consult your dealer.

– Do not put the projector in a case before it is cooled enough.

Cautions in Handling the Projector

Do not hold the lens or the lens compartment tube when lifting or moving the projector. Doing so may cause damage to the lens and the projector.

Care must be taken when handling the projector; do not drop, bump, subject it to strong forces, or put other things on the cabinet.

CAUTION

Projection lens is a motorized lens. Please note the followings when using the projector.

l Do not touch the lens while it is moving as this

could cause injury to the fingers.

l Never allow children to touch the lens.

Do not hold the lens and the peripheral part.

Compliance

Federal Communications Commission Notice

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help.

Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules. Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such

changes or modifications should be made, you could be required to stop operation of the equipment. Model Number : PLC-XM80, PLC-XM80L

Trade Name : Sanyo Responsible party : SANYO NORTH AMERICA CORPORATION Address : 21605 Plummer Street, Chatsworth, California 91311, U.S.A.

Telephone No. : (818)998-7322

AC Power Cord Requirement

The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.

AC Power Cord for the United States and Canada:

AC Power Cord used in the United States and Canada is listed by the Underwriters

Laboratories (UL) and certified by the Canadian Standard Association (CSA).

AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure that the

plug will fit into the power outlet. Do not try to defeat this safety feature. Should you be unable to insert the plug into the outlet, contact your electrician.

AC Power Cord for the United Kingdom:

This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of

the plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus is required, ensure it is of the same colour as that visible on the pin face of the plug (i.e. red or orange). Fuse covers

are available from the Parts Department indicated in your User Instructions. If the plug supplied is not suitable for your socket outlet, it should be cut off and destroyed. The end of the flexible cord should be suitably prepared and the correct plug fitted.

WARNING: A PLUG WITH BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED IN A LIVE SOCKET

OUTLET.

The Wires in this mains lead are coloured in accordance with the following code: Green-and-yellow ······ ··· ··· · Earth Blue ································· Neutral Brown ······························ Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying

the terminals in your plug proceed as follows: The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked by the letter

E or by the safety earth symbol The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.

The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

WARNING: THIS APPARATUS MUST BE EARTHED.

ASA

. If the fuse cover is detachable, never use the plug with the cover omitted. If a replacement fuse cover

or coloured green or green-and-yellow.

GROUND

THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILy ACCESSIBLE.

Part Names and Functions

Front

Back

①

②

③

① Lens Release Button ② Indicators

③ Lamp Cover ④ Speaker ⑤ Lens Cap

(for PLC-XM80)

⑥ Projection Lens

(for PLC-XM80)

⑦ Lens Mount Cover

(for PLC-XM80L)

⑧ Infrared Remote Receiver (Front & Top) ⑨ Side Controls

④

⑩

⑥ ⑧⑤

⑦

⑫

⑪

⑩⑨

⑩ Exhaust Vent

CAUTION

⑬

Hot air is exhausted from the exhaust vent. Do not put heat-sensitive objects near this side.

Bottom

⑪ Infrared Remote Receiver (Back) ⑫ Terminals and Connectors

⑬ Filter Cover & Air Intake Vent ⑭ Power Cord Connector

⑭

⑯

⑮ Hand Grip ⑯ Security Chain Hook

⑯

⑮

PNote:

This is not a handle for carrying the projector. Do not carry the projector with this hook.

⑰ Adjustable Feet

⑰

Rear Terminal

Part Names and Functions

②

①

① INFRARED REMOTE RECEIVER (Back)

The infrared remote receiver is also located in the front and top

(pp.10, 15).

② LAN CONNECTION TERMINAL Connect the LAN cable (refer to the owner’s manual of “Network

Set-up and Operation”).

③ CONTROL PORT CONNECTOR

When controlling the projector with RS-232C, connect the

control equipment to this connector with the serial control cable. (p.19)

④ ANALOG OUT TERMINAL This terminal can be used to output the incoming analog RGB

signal from INPUT 1-3 terminal to the other monitor (pp.19-20).

⑤ COMPUTER INPUT TERMINAL (ANALOG)

Connect the computer (or RGB scart) output signal to this

terminal (pp.19-20).

⑥ AUDIO OUTPUT jACK

This jack outputs the audio signal from computer or video

equipment to external audio equipment (p.21).

⑦ R/C jACK When using the wired remote control, connect the wired remote

control to this jack with a remote control cable (not supplied) (p.15).

⑧ COMPUTER INPUT TERMINAL (DIGITAL) Connect the computer output digital signal to this terminal. The

HDTV (HDCP compatible) signal can also be connected (pp.19-

20).

⑨ 5 BNC INPUT jACKS Connect the component or composite video output signal from

video equipment to VIDEO/Y, Pb/Cb, and Pr/Cr jacks or connect the computer output signal (5 BNC Type [Green, Blue, Red, Horiz. Sync, and Vert. Sync.]) to G, B, R, H/V, and V jacks (pp.19-20).

③

④ ⑤ ⑧

⑩

⑥ ⑦

⑪ ⑬

⑩ S-VIDEO INPUT jACK

Connect the S-VIDEO output signal from video

equipment to this jack (p.20).

⑪ VIDEO INPUT jACK Connect the component or the composite video

output signal from video equipment to these jacks (p.20).

⑫ AUDIO 3 jACKS (L(MONO)/R) Connect the audio output signal from video

equipment connected to ⑩ or ⑪ to this jack. For a mono audio signal (a single audio jack), connect it to the L (MONO) jack (p.21).

⑬ AUDIO 1 jACK Connect the audio output (stereo) signal from a

computer or video equipment (p.21).

⑭ AUDIO 2 jACK Connect the audio output (stereo) signal from a

computer or video equipment (p.21).

⑮ USB CONNECTOR (Series B) Use this connector when controlling a computer

with the remote control of the projector. Connect the USB terminal of your computer to this connector with the supplied USB cable (p.19).

⑭⑫⑨

◊

⑮

◊ Kensington Security Slot

This slot is for a Kensington lock used to deter theft of the projector. *Kensington is a registered trademark of ACCO

Brands Corporation.

Part Names and Functions

Side Control and Indicators

Side Control

①

②

③

④

⑤

① ON/STAND-By button

Turn the projector on or off (pp.23-24).

⑦

⑥

Indicators (on the top panel)

⑧

⑨

⑩

⑪

⑫

⑬

⑨ LAMP indicator

Light red during operations.

② MENU button

Open or close the On-Screen Menu (p.25).

③ SELECT button

– Execute the selected item (p.25). – Expand or compress the image in the Digital

zoom mode (p.43).

④

INFO. button

Display the information window on the screen

⑤ Point pqt u ( VOLUME – / + ) buttons

– Select an item or adjust the value in the On-

Screen Menu (p.25). – Pan the image in Digital zoom + mode (p.43). – Adjust the volume level (with Point t u buttons)

(p.28).

⑥ LENS button

Enter the focus, zoom, and lens shift adjustment

mode (p.27).

⑦ INPUT button

Select an input source (pp.33-35).

⑧ POWER indicator

– Light green while the projector is in stand-by mode. – Light green during operations.

(p.27).

⑩ WARNING TEMP. indicator

Blink red when the internal temperature of the

projector exceeds the operating range (pp.69, 76-78).

⑪ WARNING FILTER indicator

– Blink fast when the filter cartridge is not

installed (pp.63, 78).

– Light orange when the filter counter reaches

a time set in the timer setting, urging immediate filter cartridge replacement (pp.62, 63, 78).

⑫

P-MANAGEMENT STAND-By

Light blue when the projector is in the Power

management mode (pp.56, 76).

⑬ LAMP REPLACE indicator

Light orange when the projection lamp reaches

its end of life (pp.66, 77).

indicator

Remote Control

Part Names and Functions

③

②

④

⑤ ⑥

⑦

⑧

⑨

①

⑬

⑭

⑫

⑪

⑩

① STAND-By button

Turn the projector off (p.24).

② WIRED REMOTE jack

Connect the remote control cable (not supplied) to

this jack when using as a wired remote control.

③ SIGNAL EMISSION indicator

Light red while a signal is being sent from the

remote control to the projector.

④ ON button

Turn the projector on (p.23).

⑤ AUTO PC button

Automatically adjust the computer image to its

optimum setting (pp.29, 37).

⑥ INPUT button

Select a signal (pp.33-35).

⑦ MENU button

Open or close the On-Screen Menu (p.25).

⑧ SCREEN button

Select the screen size (p.29).

⑨ POINT pqt u ( VOLUME – / +, MUTE) buttons

– Select an item or adjust the value in the On-

Screen Menu (p.25). – Pan the image in Digital zoom + mode (p.43). – Adjust the volume level (with Point t u buttons)

or mute the sound (with Point q button.) (p.28).

⑩ MOUSE POINTER button

Move a pointer of the projector or a pointer for

wireless mouse operation (p.32).

⑪ SELECT button

– Execute the selected item (p.25). – Expand or compress the image in the Digital

zoom mode (p.43).

⑫

NO SHOW button

Temporarily turn off the image on the screen (p.29).

⑬ INFO. button

Display the input source information (p.27).

⑭ L-CLICK button

Act as the left mouse button for wireless mouse

operation (p.32).

To ensure safe operation, observe the following precautions:

– Do not bend, drop, or expose the remote control to moisture or heat. – For cleaning, use a soft dry cloth. Do not apply

benzene, thinner, spray, or any other chemical materials.

Part Names and Functions

Remote Control

⑮

⑯

⑰

⑱

⑲

⑳

⑮ D.ZOOM button

㉕

㉔

㉓

㉒

㉑

Select the Digital zoom +/- mode and resize the

image (p.43).

㉖

For PIN code and remote control code.

㉒ FREEZE button

Freeze the picture on the screen and mute the

sound (p.30).

INPUT 1- 3 buttons

⑯

Select an input source (INPUT 1 – INPUT 3) (pp.33-35).

⑰ KEySTONE button

Correct keystone distortion (pp.31, 44, 50).

⑱ ZOOM pq buttons

Zoom in and out the images (p.29).

⑲ FOCUS buttons

Adjust the focus (p.29).

⑳ RESET/ON/ALL-OFF switch

When using the remote control, set this switch to

“ON”. Set it to “ALL OFF” for power saving when it is not in use. Slide this switch to “RESET” to initialize the remote control code.

㉑ LENS SHIFT button

Select the Lens Shift function (p.29).

㉓ P-TIMER button

Operate the P-timer function (p.30).

㉔ R-CLICK button

Act as the right mouse button for wireless mouse

operation (p.32).

㉕

POINTER button

Act as the On-Off switch for the Pointer (pp.30, 32,

58).

㉖ NUMBER buttons

Act as number buttons. Use these buttons when

setting the remote control codes (p.16) or when entering the PIN code numbers (pp. 23, 54, 60).

Part Names and Functions

Remote Control Battery Installation

Open the battery compartment lid.

1 2 3

Press the lid downward and slide it.

To ensure safe operation, please observe the following precautions :

ü Use two (2) AAA or LR03 type alkaline batteries. ü Always replace batteries in sets. ü Do not use a new battery with a used battery. ü Avoid contact with water or liquid. ü Do not expose the remote control to moisture or heat. ü Do not drop the remote control. ü If the battery has leaked on the remote control, carefully wipe the

case clean and install new batteries.

ü Risk of an explosion if battery is replaced by an incorrect type. ü Dispose of used batteries according to the instructions.

Install new batteries into the compartment.

Two AAA size batteries

For correct polarity (+ and –), be sure battery terminals are in contact with pins in the compartment.

Remote Control Receivers and Operating Range

Point the remote control toward the projector (to Infrared Remote Receivers) when pressing the buttons. Maximum operating range for the remote control is about 16.4’ (5 m) and 60 degrees in front, back and top of the projector.

Replace the compartment lid.

16.4’ (5 m)

Infrared Remote Receivers are provided in front, back and top of of the projector. You can conveniently use all of the receivers (pp. 10, 11, 57).

PNote:

When hanging the projector from the ceiling, select the Infrared

Remote Receiver which is located farther away from the fluorescent light (p.57).

Wired Remote Control Transmitter

The remote control can be used as a wired remote control. Wired remote control helps you use the remote control outside of the operating range (16.4’/ 5 m). Connect the remote control and the projector with the remote control cable (sold separately). Connected with the remote control cable, the remote control does not emit wireless signal.

16.4’ (5 m)

Part Names and Functions

Remote Control Code

The eight different remote control codes (Code 1–Code 8) are assigned to this projector. Switching the remote control codes prevents interference from other remote controls when several projectors or video equipment next to each other are operated at the same time. Change the remote control code for the projector first before changing that for the remote control. See “Remote control” in the Setting Menu on page 56.

Press and hold the MENU and a number button (1–8) for

more than five seconds to switch between the codes.

To initialize the remote control code, slide the RESET/ ON/

ALL-OFF switch to “RESET”, and then to “ON”. The initial

code is set to Code 1.

MENU button

Adjustable Feet

Projection angle can be adjusted up to 4.0 degrees with the adjustable feet.

Rotate the adjustable feet and tilt the projector to the proper height; to raise the projector, rotate the both feet clockwise.

To lower the projector or to retract the adjustable feet, rotate the both feet counterclockwise.

To correct keystone distortion, press the KEYSTONE button on the remote control or select Keystone from the menu (see pages 14, 31, 44, 50).

Number buttons (1-8)

RESET/ON/ALL

OFF Switch

Press and hold the MENU and a number button (1-8) that corresponds to the remote control code for more than five seconds to switch between the codes.

Adjustable Feet

Installation

(Inch Diagonal)

Positioning the Projector

For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the screen. (for PLC-XM80)

PNote:

• The brightness in the room has a great influence on picture quality. It is recommended to limit ambient lighting in order to obtain the best image.

• All measurements are approximate and may vary from the actual sizes.

75.1' (22.9 m)

44.3’(13.5 m)

4.3'(1.3 m)

22.0’ (6.7 m)

10.9’ (3.3 m)

40”

33.2’(10.1 m)

100”

59”

300”

200”

177”

118”

400”

236”

Max. Zoom

Min. Zoom

(Center)

400”

Screen Size (W x H) mm

4:3 aspect ratio

Zoom (max.)

Zoom (min.)

40”

610 x 457

4.3'(1.3 m)

7.4'(2.3 m)

100”

2032 x 1524

10.9’ (3.3 m)

18.7' (5.7 m)

200”

4064 x 3048

22.1’ (6.7 m)

37.6' (11.5 m)

300”

6096 x 4572

33.2’(10.1 m)

56.5' (17.2 m)

400”

8128 x 6096

44.3’(13.5 m)

75.1' (22.9 m)

Lens Shift Adjustment

Projection lens can be moved from side to side and up and down with the motor-driven lens shift function. This function makes the positioning of images easy on the screen. (See page 27)

The display position can be shifted upward up to 50% elevation of the display.

When the lens is shifted to top.

The display position can be shifted to the left in up to 10% width of the display.

When the lens is shifted to leftmost.

The display position can be shifted downward up to 50% low level of the display.

When the lens is shifted to bottom.

The display position can be shifted to the right in up to 10% width of the display.

When the lens is shifted to rightmost.

Lens shift adjustable range

50%

Lens shift center position

10%

Shift range

Installation

Lens Installation

When replacing the lens or using an optional lens, install the lens by following the instructions below. Ask the sales dealer for detailed information of the optional lens specifications.

Removing the lens

Shift the lens to the center position by using the Lens

shift function (p.27). Turn off the projector and unplug the AC power cord.

While pressing the Lens release button on the top

of the cabinet, turn the lens counterclockwise until it stops and pull it out slowly from the projector.

CAUTION

Be careful when handling the lens. Do not drop.

Lens release button

Attaching the lens to the projector

Remove the lens mount cover.

Fit the lens to the projector by aligning the red dot on

the lens with the red dot of the projector. Slowly turn the lens clockwise until it clicks. Make sure

that the lens is fully inserted to the projector.

CAUTION

Do not press the lens release button when attaching the lens.

NOTES ON LENS INSTALLATION

ü Do not touch or remove any parts except the lens and related parts. It may result in

malfunctions, electrical shock, fire hazard or other accidents.

ü Before installing or replacing the lens, check that the Model No. of the Projection Lens

matches to the projector.

ü For details of the lens and installation, contact the sales dealer where you purchased the

projector.

Red dots

Connecting to a Computer (Digital and Analog RGB)

Installation

Cables used for connection (

• VGA Cable (One cable is supplied.)

• DVI-Digital cable

• BNC cable

Monitor Output

BNC

cable

⁄

Serial out

Serial Cross

cable

⁄

= Cables not supplied with this projector.)

• Serial Cross cable

⁄

• USB cable

Monitor Input

VGA

cable



Monitor Output

VGA

cable

Monitor Output

DVI-Digital

cable

USB port

USB

cable

G B R H/V V

Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables.

CONTROL PORT

DIGITAL INANALOG INANALOG OUT

See the next page for the signals that can output to the ANALOG



OUT terminal.

USB

Installation

Connecting to Video Equipment (Video, S-video)

Cables used for connection (

• Video cable (RCA x 1 or RCA x 3) ⁄

• BNC cable (BNC x 1 or BNC x 3) ⁄

• S-video cable ⁄

• Scart-VGA cable ⁄

• DVI-Digital cable ⁄

Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables.

Component Composite Video

Video Output

(Y, Pb/Cb, Cr/Pr)

BNC cable

Component

Video Output

⁄

= Cables not supplied with this projector.)

Analog Out Signal Table

Input Terminal Monitor Out Cable

D-sub15

Input 1

DVI-D

Input 2 5 BNC

RCA

Input 3

S-video Video

RCA cable

RGB (PC analog) YES RGB (SCART) NO RGB (PC digital) NO RGB (AV HDCP) NO RGB YES Video YES Y, Pb/Cb, Pr/Cr YES Y, Pb/Cb, Pr/Cr YES S-video NO Video YES

Composite Video

Refer to the Analog Out Signal Table (above).

S-video

Output

S-video cable

⁄ ⁄ ⁄

⁄

RGB Scart 21-pin Output

Scart-VGA

cable

⁄

A cable with one end D-sub 15 and the other end (Black box) compatible with each equipment is necessary.

Digital Output

(HDCP

compatible)

DVI-Digital

cable

Video

Y - Pb/Cb - Pr/Cr

Video

ANALOG OUT S-VIDEO

DIGITAL INANALOG IN

Connecting for Audio Signal

Installation

Cables used for connection (

• Audio cable ⁄

Audio Output

Audio cable (stereo)

⁄

= Cables not supplied with this projector.)

External Audio Equipment

Audio Output

(R) (L)

Audio cable (stereo)

(R) (L)

Audio Input

Audio cable

Audio cable (stereo)

AUDIO IN 1/2

(R) (L)

AUDIO OUT (stereo)

Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables.

Installation

Connecting the AC Power Cord

This projector uses nominal input voltages of 100–240 V AC and it automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system. If you are not sure of the type of power being supplied, consult your authorized dealer or service center. Connect the projector with all peripheral equipment before turning on the projector.

CAUTION

The AC outlet must be near this equipment and must be easily accessible.

PNote:

Unplug the AC power cord when the projector is not in use. When

the projector is connected to an outlet with AC power cord, it is in stand-by mode and consumes a little electric power.

Connect the AC power cord (supplied) to the projector.

NOTE ON THE POWER CORD

AC power cord must meet the requirements of the country where you use the projector. Confirm the AC plug type with the chart below and proper AC power cord must be used. If the supplied AC power cord does not match your AC outlet, contact your sales dealer.

Projector side AC Outlet side

For Continental Europe

To the AC Outlet.

(200–240 V AC)

To POWER CORD CONNECTOR on your projector.

For the U.S.A. and Canada

Ground

To the AC Outlet.

(120 V AC)

For the U.K.

To the AC Outlet.

(200–240 V AC)

Basic Operation

Turning On the Projector

Complete peripheral connections (with a computer, VCR, etc.)

before turning on the projector. Connect the projector’s AC power cord into an AC outlet. The

LAMP indicator lights red and the POWER indicator lights green.

Press the ON/STAND-BY button on the side control or the ON

button on the remote control. The LAMP indicator dims and the cooling fans start to operate. The preparation display appears on the screen and the countdown starts.

After the countdown, the input source that was selected the last

time and the Lamp control status icon (see page 55) appear on the screen.

If the projector is locked with a PIN code, PIN code input dialog box will appear.

PNote:

• When the Logo select function is set to Off, the logo will not be shown on the screen (p.52).

• When Countdown off or Off is selected in the Display function, the countdown will not be shown on the screen (p.52).

• When the Input button function is set to Mode 3, the input signal will be searched automatically (p.51).

• If you press the ON/STAND-BY button on the top control or the remote control during the countdown period, you can skip the countdown and go to the normal operations. In this case, however, the brightness of the image needs some time to stabilize after turning on the projector. The display may flicker after turning on the lamp for the characteristics of the lamp. This is normal operation and not a malfunction.

The preparation display will disappear after 30 seconds.

Selected Input Source and Lamp control

Input 1 RGB(PC analog)

Lamp control status

(See page 55 for Lamp control status.)

PNote:

The Lamp replacement icon and the Filter replacement

or the Filter cartridge replacement icon may appear on the screen depending on the usage state of the projector.

Enter a PIN code

Use the Point pq buttons on the side control or Number buttons on the remote control to enter a number.

When using side control

Use the Point Press the Point

frame pointer to the next box. The number changes to ⁄. Repeat this step to complete entering a four-digit number. After entering the four-digit number, move the pointer to “Set”. Press the SELECT button so that you can start to operate the projector.

When using remote control

Press the Number buttons on the remote control to enter a number (p.14). When you complete entering a four-digit number, the pointer moves to “Set”. Press the SELECT button so that you can start to operate the projector.

If you fixed an incorrect number, use the Point the pointer to the number you want to correct, and then enter the correct number.

If you entered an incorrect PIN code, “PIN code” and the number (

⁄⁄⁄⁄) will turn red for a moment. Enter the correct PIN code all

over again.

pq buttons on the side control to select a number.

u button to fix the number and move the red

t button to move

PIN Code Input Dialog Box

After the OK icon disappears, you can operate the projector.

PNote:

• If the PIN code number is not entered within three minutes after the PIN code dialog box appeared, the projector will be turned off automatically.

• The "1234" is set as the initial PIN code at the factory.

Basic Operation

What is PIN code?

PIN (Personal Identification Number) code is a security code that allows the person who knows it to operate the projector. Setting a PIN code prevents unauthorized use of the projector.

A PIN code consists of a four-digit number. Refer to the PIN code lock function in the Setting Menu on page 59-60 for locking operation of the projector with your PIN code.

CAUTION ON HANDLING PIN CODE

If you forget your PIN code, the projector can no longer be started. Take a special care in setting a new PIN code; write down the number in a column on page 84 of this manual and keep it on hand. Should the PIN code be missing or forgotten, consult your dealer or service center.

Turning Off the Projector

Press the ON/STAND-BY button on the side control or the

STAND-BY button on the remote control, and Power off? appears on the screen.

Press the ON/STAND-BY button on the side control or the

STAND-BY button on the remote control again to turn off the projector. The LAMP indicator lights bright and the POWER indicator turns off. After the projector is turned off, the cooling fans operate for 90 seconds. You cannot turn on the projector during this cooling down period.

When the projector has cooled down enough, the POWER

indicator lights green and then you can turn on the projector. To unplug the AC power cord, wait until the projector is completely cooled down.

TO MAINTAIN THE LIFE OF THE LAMP, ONCE YOU TURN THE PROJECTOR ON, WAIT AT LEAST FIVE MINUTES BEFORE TURNING IT OFF. DO NOT UNPLUG THE AC POWER CORD WHILE COOLING FANS ARE RUNNING OR BEFORE THE POWER INDICATOR LIGHTS GREEN AGAIN. OTHERWISE IT WILL RESULT IN SHORTENING OF THE LAMP LIFE.

DO NOT OPERATE THE PROJECTOR CONTINUOUSLY WITHOUT REST. CONTINUOUS USE MAY RESULT IN SHORTENING THE LAMP LIFE. TURN OFF THE PROJECTOR AND LET STAND FOR ABOUT AN HOUR IN EVERY 24 HOURS.

Power off? disappears after 4 seconds.

PNote:

• When the On start function is set to On, the projector will be turned on automatically by connecting the AC power cord to an AC outlet (p.58).

• The running speed of cooling fans is changed according to the temperature inside the projector.

• Do not put the projector in a case before the projector is cooled enough.

• If the WARNING TEMP. indicator blinks red, see “Warning Indicators” on page 69.

• The projector cannot be turned on during the cooling period with the POWER indicator turned off. You can turn it on again after the POWER indicator becomes green again.

How to Operate the On-Screen Menu

Basic Operation

The projector can be adjusted or set via the On-Screen Menu. The menus have a hierarchical structure, with a main menu that is divided into submenus, which are further divided into other submenus. For each adjustment and setting procedure, refer to respective sections in this manual.

Press the MENU button on the side control or the remote

control to display the On-Screen Menu.

Use the Point pq buttons to highlight or select a main menu

item. Press the Point u or the SELECT button to access the submenu items. (The selected item is highlighted in orange.)

Use the Point pq buttons to select the desired submenu item

and press the SELECT button to set or access the selected item.

Use the Point pqt u buttons to adjust the setting or switch

between each option and press the SELECT button to activate it and return to the submenu.

Side Control

MENU button

SELECT button

POINT buttons

Remote Control

MENU button

POINT buttons

SELECT button

Press the Point t button to return to the main menu. Press

the MENU button to exit the On-Screen Menu.

On-Screen Menu

Point

or SELECT

button

Network

Standard Real Image 1 Image 2 Image 3 Image 4 Image 5 Image 6 Image 7 Image 8 Image 9 Image 10

The currently set item is check marked.

Standard

Real Image 1 Image 2 Image 3 Image 4 Image 5 Image 6 Image 7 Image 8 Image 9 Image 10

The selected item is highlighted in orange.

Basic Operation

For detailed functions of each menu, see “Menu Tree” on pages 73-75.

Main Menu

①

Menu Bar

Sub-Menu

① Input

Used to select an input source (Input 1, Input 2, Input 3 ) (p.33).

Ç PC adjust

Used to adjust the parameters to match with the input signal format (pp.37-39).

É Image select

For computer source, used to select an image level among Standard, Real, and Image 1-10 (p.40). For Video source, used to select an image level among Standard, Cinema, and Image 1-10 (p.46).

Image adjust

For computer source, used to adjust the computer image. [Contrast/Brightness/Color temp./White balance (R/G/B)/

Offset(R/G/B)/Sharpness/Gamma/Reset/Store] (pp.41-42).

For Video source, used to adjust the video image. [Contrast/Brightness/Color/Tint/Color temp./White balance (R/G/

B)/Offset (R/G/B)/Sharpness/Gamma/Noise Reduction/Progressive/Reset/Store] (pp.47-48).

Screen

For computer source, used to adjust the size of the image. [Normal/True/Wide/Full/Custom/Digital zoom +/-/Keystone/

Ceiling/Rear/Reset] (pp.42-44).

For Video source, used to adjust the size of the image. [Normal/Wide/Custom/Keystone/Ceiling/Rear/Reset] (pp. 49-

50).

Ü Sound

Used to adjust the volume or mute the sound (p.28).

Setting

Used to set the projector’s operating configurations (pp.51-62).

à Information

Display the input source information: Input, H-sync freq., V-sync freq., Screen, Language, Lamp status, Lamp counter,

Filter counter, Power management, Key lock, PIN code lock, Simple mode, Remote control, and SERIAL NO. (p.29).

â Network

See the owner’s manual of “Network Set-up and Operation”.

ä Guide

The key operation is displayed.

Zoom

Operating with Projector Control

Basic Operation

Lens Operation

The following lens operation can be made with the Lens button on the side control.

Press the LENS button to enter each lens operation mode. The selected adjustment display appears on the screen.

Zoom " Focus " Lens Shift "

Zoom Adjustment

Display Zoom on the screen. Use the Point pq buttons to zoom in and out the image.

Focus Adjustment

Display Focus on the screen. Use the Point pq buttons to adjust focus of the image.

Lens Shift Adjustment

Display Lens shift on the screen. Use the Point pqt u buttons to position the screen to the desired point without having picture distortion. The screen can be moved up or down to 50 percent, or sideways up to 10 percent from the central axis of the lens shift. Press and hold the LENS SHIFT button for more than 5 seconds to return to the central position.

• • • • •

Side Control

INFO. button

LENS button

POINT buttons

PNote:

• The arrow disappears at the maximum lens shift in each direction.

• The arrow turns red when the lens shift comes to the center position of the screen.

INFO. button

Information display can be used to confirm the current operating condition of the projector and the signal being projected through the projector. Press the INFO. button on the remote control to display the information window on the screen. To hide the information window, press the INFO. button again or press the MENU button. The information window can also be selected from the menu.

PNote:

• The H-sync freq. and V-sync freq. values described in the figure may be different from the actual values.

• SERIAL NO. is used to service the projector.



Information Menu

Basic Operation

Sound Adjustment

Direct Operation

Volume

Press the VOLUME+/– buttons on the side control or on the remote control to adjust the volume. The volume dialog box appears on the screen for a few seconds.

Mute

Press the MUTE (Point q) button on the remote control to select On to temporarily turn off the sound. To turn the sound back on, press the MUTE (Point q) button again to select Off or press the VOLUME +/– buttons. The Mute function is also effective for the AUDIO OUT jack.

Menu Operation

Press the MENU button to display the On-Screen Menu. Use

the Point pq buttons to select Sound. Press the Point u or the SELECT button to access the submenu items.

Use the Point pq buttons to select the desired submenu item

and press the SELECT button to access the selected item.

Side Control

Remote Control

Volume Dialog Box

VOLUME +/– buttons

VOLUME – button

VOLUME + button

MUTE (Point q) button

Approximate level of the volume.

Volume

Press the Point p button to turn up the volume; press the Point q button to turn down the volume.

Built-in SP

Press the Point pq buttons to switch the Built-in SP function On/ Off. When the Built-in SP sound is turned off, Off is displayed.

Mute

Press the SELECT button to switch the mute function On/Off. When the sound is turned off, On is displayed. Press the VOLUME +/– buttons again to turn the sound back on.

Press the Point Mute function On or Off. The dialog box disappears after 4 seconds.

Sound Menu

q button to set the

Basic Operation

Operating with Remote Control

Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu.

AUTO PC button

Press the AUTO PC button on the remote control to operate the Auto PC adj. function. The computer screen adjustment can be done easily by pressing this button. See page 37 for details.

SCREEN button

Press the SCREEN button on the remote control to select the desired screen size. The selected screen size symbol appears on the screen for 4 seconds. See pages 42 to 44 and 49 to 50 for details. Press and hold the SCREEN button for more than 5 seconds to return all the screen size adjustment setting to the factory default setting.

NO SHOW button

Press NO SHOW button on the remote control to black out the image. To restore to normal, press the NO SHOW button again or press any other button. The NO SHOW symbol appeares on the

screen for 4 seconds.

D.ZOOM button

Press the D.ZOOM button on the remote control to enter to the Digital zoom +/– mode. See page 43 for details.

LENS SHIFT button

See page 27 for details.

Remote Control

AUTO PC button

SCREEN button

D.ZOOM button

ZOOM buttons

PNote:

See the next page for the description of other

buttons.

INFO. button NO SHOW

button

LENS SHIFT button

FOCUS buttons

ZOOM buttons

Press the ZOOM buttons on the remote control to zoom in and out the image.

FOCUS buttons

Press the FOCUS buttons on the remote control to adjust focus of the image.

INFO button

Press the INFO. button on the remote control to display the information window on the screen. See page 27 for details.

Basic Operation

MOUSE POINTER button

Move the pointer on the screen with this button.

POINTER button

Press POINTER button on the remote control to display the Pointer on the screen. (pp.32, 58)

P-TIMER button

Press the P-TIMER button on the remote control to operate the Count up/Count down function. Refer to p.58 for detail of Setting for the P-timer function.

To stop the count time, press the P-TIMER button. To cancel the P-timer function, press and hold the P-TIMER button.

FREEZE button

Press the FREEZE button on the remote control to freeze the picture on the screen and mute the sound. To cancel the FREEZE function, press the FREEZE button again or press any other button. Fig.1 will appear when the Freeze function is working.

Fig.1

Remote Control

MOUSE POINTER button

POINTER button P-TIMER button FREEZE button

PNote:

See the previous page for the description of other buttons.

Keystone Correction

Basic Operation

If a projected picture has keystone distortion, correct the image with Keystone adjustment. It is not available when On-Screen menu is displayed.

Press the KEYSTONE button on the remote control. The keystone dialog box appears. Correct keystone distortion by pressing the Point pq buttons on the remote control. Keystone adjustment can be memorized. (p.50)

Reduce the upper width with the Point p button.

Reduce the lower width with the Point q button.

Remote Control

POINT pq buttons

KEySTONE button

PNote:

• The white arrows indicate that there is no correction.

• A red arrow indicates the direction of correction.

• An arrow disappears at the maximum correction.

• If you press and hold the KEYSTONE button for more than 3 seconds while the Keystone correction

dialog box is being displayed, the Keystone correction adjustment will be released.

• The adjustable range is limited depending on the input signal.

Basic Operation

Pointer Function

You can move the Pointer of the projector with the remote control to emphasize a part of the projected image.

Press the POINTER button to activate the Pointer function.

Use the MOUSE POINTER button to move the Pointer.

To cancel the Pointer function, press the POINTER button

again or press any other button.

Dot



PNote:

You can choose the pattern of Pointer (Dot/Arrow/Finger) in the

Setting Menu (p.58)

Arrow

Finger

Wireless Mouse Operation

The remote control can be used as a wireless mouse for your computer.

Before operating the wireless mouse, connect your computer

and the projector with the supplied USB cable (p.19). When the Pointer function is used, the wireless mouse is not available.

When a USB cable is connected to the computer and the

projector, turn on the projector first, then the computer. If you turn on the computer first, the wireless mouse function may not operate properly.

MOUSE POINTER button

POINTER button

MOUSE POINTER button

Move the pointer on the screen with this button.

R-CLICK button

Acts as right (click) mouse button while the projector and a computer are connected with a USB cable.

L-CLICK button

Acts as left (click) mouse button while the projector and a computer are connected with a USB cable.

Input Selection

Direct Operation

Side Control/Remote Control Operation

Side Control

INPUT button*

* Only the Input button function is set Mode 1 in the Setting menu, the INPUT button is used for switching input source. (p.51)

The input source changes each time you press the INPUT button on the side control or the remote control as follows: Input 1 ® Input 2 ® Input 3 ® ... Before using the INPUT button on the side control or the remote control, you must select a correct input source by On-

Screen Menu and the latest input source will be displayed.

Remote Control

Remote Control Operation

Press the INPUT 1, INPUT 2, or INPUT 3 button on the remote control. The input source appears on the screen as you press each button. Select the connected input source.

INPUT 1 button

Input 1

RGB (PC analog)

RGB (Scart)

RGB (PC digital)

RGB (AV HDCP)

INPUT 3 button

Input 3

Video

y,Pb/Cb,Pr/Cr

S-video

INPUT 2 button

Input 2

Video

y,Pb/Cb,Pr/Cr

RGB

Remote Control

INPUT 1/2/3 buttons

Input Selection

Computer Input Source Selection

Menu Operation

Press the MENU button to display the On-Screen Menu. Use

the Point pq buttons to select Input and then press the Point u or the SELECT button.

Use the Point pq buttons to select the desired input and

then press the Point u button to access the submenu items.

Use the Point pq buttons to select the desired source and

then press the SELECT button.

WHEN SELECTING INPUT 1 (COMPUTER INPUT TERMINALS )

RGB(PC analog)

When your computer is connected to the INPUT 1 (ANALOG) terminal, select RGB (PC analog).

RGB(PC digital)

INPUT MENU

Input 1 RGB(PC analog) Input 2 RGB Input 3 Video

System Auto

Input 1 RGB(PC analog)

Input 2 RGB Input 3 Video

System SVGA 1

When your computer is connected to INPUT 1 (DIGITAL) terminal, select RGB(PC digital).

PNote:

Input source changes if the INPUT 1 button on the remote control is

pressed.

WHEN SELECTING INPUT 2 (5 BNC INPUT jACKS )

When connecting the computer output [5 BNC Type (Green, Blue, Red, Horiz. Sync, and Vert. Sync.)] from the computer to G, B, R, H/HV, and V jacks:

RGB

When your computer is connected to the INPUT 2 (5 BNC INPUT JACKS) terminal, select RGB.

INPUT 1 MENU

INPUT 2 MENU

Input 1

RGB(PC analog)

RGB(Scart) RGB(PC digital) RGB(AV HDCP)

Y,Pb/Cb,Pr/Cr

Video Input Source Selection

Menu Operation

Press the MENU button to display the On-Screen Menu. Use

the Point pq buttons to select Input and then press the Point u or the SELECT button.

Use the Point pq buttons to select the desired input and

then press the Point u button to access the submenu items. Use the Point pq buttons to select the desired source and

then press the SELECT button.

WHEN SELECTING INPUT 1 (COMPUTER INPUT TERMINALS )

When connecting to video equipment, select the type of Video source in the Source Select Menu.

RGB(Scart)

When scart video equipment is connected to the INPUT 1 (ANALOG) terminal, select RGB (Scart).

Input Selection

INPUT 1 MENU

RGB(AV HDCP)

If the HDCP-compatible signal source is connected to the INPUT 1 (DIGITAL) terminal, select RGB (AV HDCP).

WHEN SELECTING INPUT 2 (5 BNC INPUT jACKS )

When connecting to video equipment, select the type of Video source in the Source Select Menu.

Video

y,Pb/Cb,Pr/Cr

When the video input signal is connected to the VIDEO jack, select Video.

When the video input signal is connected to the Y-Pb/Cb-Pr/Cr jacks, select

y,Pb/Cb,Pr/Cr

PNote:

• When the video input signal is connected to the Y-Pb/Cb-Pr/Cr jacks, Y,Pb/Cb,Pr/Cr takes precedence of RGB.

• Y,Pb/Cb,Pr/Cr input can accept the component signal and the analog RGB signal. When analog RGB signal is not recognized in Y,Pb/Cb,Pr/ Cr input source, set to RGB input manually.

WHEN SELECTING INPUT 3 (AV TERMINALS )

When connecting to video equipment, select the type of Video source in the Source Select Menu.

PNote:

HDCP (High-bandwidth Digital Content Protection) is

a system for protecting digital entertainment content which is delivered by DVI (Digital Visual Interface) from being copied. The specification of HDCP is decided and controlled by Digital Content Protection, LLC. Should the specification be changed, this projector may not display the digital content protected by HDCP.

INPUT 2 MENU

Y,Pb/Cb,Pr/Cr

INPUT 3 MENU

Y,Pb/Cb,Pr/Cr

Video

y,Pb/Cb,Pr/Cr

S-video

When the video input signal is connected to the VIDEO jack, select Video.

When the video input signal is connected to the Y-Pb/Cb-Pr/Cr jacks, select

When the video input signal is connected to the S-VIDEO jack, select S-video.

y,Pb/Cb,Pr/Cr

Computer Input

Computer System Selection

Automatic Multi-Scan System

This projector automatically tunes to various types of computers with its Multi-scan system and Auto PC adjustment. If a computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional settings. (Signal formats provided in this projector are shown on pages 79-80)

One of the following messages may appear when:

Auto

-----

Mode 1

SVGA 1

*Mode 1 and SVGA 1 are examples.

The projector cannot recognize the connected signal conforming to the provided PC Systems. Auto is displayed on the System Menu box and the Auto PC adjustment function works to display proper images. If the image is not projected properly, a manual adjustment is required (pp.38-39).

There is no signal input from the computer. Check the connection between your computer and the projector. (See “Troubleshooting” on pp.70-72.)

The preset system is manually adjusted in the PC adjust Menu. The adjusted data can be stored in Mode 1-10 (pp.38-39).

PC Systems provided in this projector is chosen. The projector chooses a proper system provided in the projector and displays it.

Selecting Computer System Manually

PC System Menu

The PC System Menu Selected system is displayed.

PC system can also be selected manually.

Press the MENU button to display the On-Screen Menu. Use

the Point pq buttons to select Input and then press the Point u or the SELECT button.

Use the Point pq buttons to select Systerm and then press

the Point u or the SELECT button.

Use the Point pq buttons to select the desired system and

then press the SELECT button.

PC System Menu

Systems in this dialog box can be selected.

Customized Mode (1-10) set in the PC adjust Menu (pp.38-39).

Computer Input

Auto PC Adjustment

Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Position H and Position V positions to conform to your computer.

Direct Operation

The Auto PC adjustment function can be operated directly by pressing the AUTO PC button on the remote control.

Menu Operation

Auto PC adj.

Press the MENU button to display the On-Screen Menu. Use

the Point pq buttons to select PC adjust and then press the Point u or the SELECT button.

Use the Point pq buttons to select Auto PC adj. and then

press the SELECT button.

Remote Control

PC adjust Menu

AUTO PC button

Auto PC adj. Fine sync Total dots 1366 Position H 0 Position V 0 Current mode Clamp 0 Display area H 1024 Display area V 768 Reset Mode free Store

To store the adjusted parameters.

The adjusted parameters from the Auto PC Adjustment can be stored in the projector. Once the parameters are stored, the setting can be done just by selecting Mode in PC SYSTEM Menu (p.36). See “Manual PC Adjustment” on pages 38-39.

PNote:

• Fine sync, Total dots, Position H and Position V of certain computers cannot be fully adjusted with the Auto PC Adjustment function. When the image is not provided properly with this operation, manual adjustments are required. (pp.38-39)

• Auto PC Adjustment cannot be operated in Digital Signal Input on the DVI terminal and 480p, 575p, 480i, 575i, 720p, 1035i, 1080i or 1080p is selected on the PC SYSTEM Menu.

• Depending on the condition of signals and the type and length of cables, the signals may not be properly viewed.

Use the Point pq buttons to select Auto PC adj. and press the SELECT button. Please wait... appears while the Auto PC

adjustment is in process.

Auto PC adj.

Fine sync Total dots 1366 Position H 0 Position V 0 Current mode Clamp 0 Display area H 1024 Display area V 768 Reset Mode free Store

Computer Input

Manual PC Adjustment

Some computers employ special signal formats which may not be tuned by Multi-Scan system of this projector. Manual PC Adjustment enables you to precisely adjust several parameters to match those special signal formats. The projector has 10 independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific computer.

PNote: The PC Adjust Menu cannot be operated when the digital signal input on the DVI terminal is selected on PC System

Menu.

Press the MENU button to display the On-Screen Menu. Use

the Point pq buttons to select PC adjust and then press the Point u or the SELECT button.

Use the Point pq buttons to select the desired item and then

press the SELECT button to display the adjustment dialog box. Use the Point t u buttons to adjust the setting value.

Fine sync

Use the Point t u buttons to adjust the value, eliminating a flicker from the image displayed (from 0 to 31).

Total dots

Use the Point t u buttons to adjust the number of total dots in one horizontal period to match your PC image.

Position H

Use the Point t u buttons to adjust the horizontal picture position.

PC adjust Menu

Auto PC adj. Fine sync Total dots 1366 Position H 0 Position V 0 Current mode Clamp 0 Display area H 1024 Display area V 768 Reset Mode free Store

Auto PC adj.

Fine sync Total dots 1366 Position H 0 Position V 0 Current mode Clamp 0 Display area H 1024 Display area V 768 Reset Mode free Store

Position V

Use the Point t u buttons to adjust the vertical picture position.

Current mode

Press the SELECT button to show H-sync freq. and V-sync freq. of the connected computer.

Clamp

Use the Point t u buttons to adjust the clamp level. When the image has dark bars, try this adjustment.

Display area H

Use the Point t u buttons to adjust the horizontal area displayed by this projector.

Display area V

Use the Point t u buttons to adjusts the vertical area displayed by this projector.

Auto PC adj.

Fine sync

Total dots 1366 Position H 0 Position V 0 Current mode Clamp 0 Display area H 1024 Display area V 768 Reset Mode free Store

Reset

To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select yes. All adjustments will return to their previous figures.

Mode free

To clear the stored data, select Mode free and then press the Point

u or the SELECT button. Move the highlight to the Mode that you want to clear and then press the SELECT button.

Store

To store the adjusted data, select Store and then press the Point u or the SELECT button. Move the highlight to one of the Modes 1 to 10 in which you want to store, and then press the SELECT button.

Computer Input

Mode free

This mode has stored parameters.

Mode 1

Mode 2 Mode 3 Mode 4 Mode 5 Mode 6 Mode 7 Mode 8 Mode 9 Mode 10

Values of Total dots, Position H, Position V, Display area H and Display area V.

Store

Mode 1 Mode 2 Mode 3

Mode 4

Mode 5 Mode 6 Mode 7 Mode 8 Mode 9 Mode 10

Where to free?

Total dots 1344 Position H 255 Position V 34 Display area H 1024 Display area V 768

0 0

Press the SELECT button to clear the stored data.

Vacant

Where to store?

store?

Total dots

Total dots 1344 Position H

Position H 255 Position V

Position V 34 Display area H

Display area H 1024 Display area V

Display area V 768

Free

PNote:

• Display area (H/V) cannot be selected when 480i, 575i, 480p, 575p, 720p, 1035i , 1080i or 1080p is selected in the PC

System Menu (p.36).

• When input computer signal to the projector, PC adjust function will become available.

Press the MENU button to close this dialog box.

Press the SELECT button to store the data.

Computer Input

Menu Operation

Press the MENU button to display the On-Screen Menu.

Use the Point pq buttons to select Image select and then press the Point u or the SELECT button.

Use the Point pq buttons to select the desired item

and then press the SELECT button.

Image Level Selection

Standard

Normal picture level preset on the projector.

Real

Picture level with improved halftone for graphics.

Image 1–10

User preset picture adjustment in the Image adjust Menu (p.42).

Image select Menu

Image Adjustment

Computer Input

Press the MENU button to display the On-Screen Menu.

Use the Point pq buttons to select Image adjust and then press the Point u or the SELECT button.

Use the Point pq buttons to select the desired item

and then press the SELECT button to display the adjustment dialog box. Use the Point t u buttons to adjust the setting value.

Contrast

Press the Point t button to decrease the contrast; press the Point u button to increase the contrast (from 0 to 63).

Brightness

Press the Point t button to decrease the brightness; press the Point u button to increase the brightness (from 0 to 63).

Color temp.

Use the Point t u buttons to select the desired Color temp. level (XLow, Low, Mid or High).

White balance (Red)

Press the Point t button to lighten red tone; press the Point u button to deepen red tone (from 0 to 63).

White balance (Green)

Press the Point t button to lighten green tone; press the Point u button to deepen green tone (from 0 to 63).

Image adjust Menu

Selected Image mode

Use the Point t u buttons to adjust the setting value.

Contrast 32 Brightness 32 Color temp. High Red 28 Green 32 Blue 35 Offset Sharpness 8 Gamma 8 Reset Store

Contrast 32

Brightness 32 Color temp. High Red 28 Green 32 Blue 35 Offset Sharpness 8 Gamma 8 Reset Store

White balance (Blue)

Press the Point t button to lighten blue tone; press the Point u button to deepen blue tone (from 0 to 63).

Offset(Red/Green/Blue)

Press the Point t button to lighten red/green/blue tone of the black level of an image; press the Point u button to deepen red/green/ blue tone of the black level of an image.

Sharpness

Press the Point t button to decrease the sharpness of the image; press the Point u button to increase the sharpness of the image (from 0 to 31).

Gamma

Use the Point t u buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15).

Note:

When White balance Red, Green or Blue is adjusted, Color temp. will change to Adj..

Computer Input

Reset

To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select yes. All adjustments will return to their previous figures.

Store

To store the adjusted data, select Store and press the Point u or the SELECT button. Use the Point pq buttons to select one from Image 1 to 10 and press the SELECT button. A confirmation box appears and then select yes. Stored data can be called up by selecting an Image (1–10) in the Image Mode Selection on page 40.

Screen Size Adjustment

Select the desired screen size that conforms to the input signal source.

Store

A confirmation box appears and then select yes.

SCREEN MENU

Press the MENU button to display the On-Screen Menu. Use

the Point pq buttons to select Screen and then press the Point u or the SELECT button.

Use the Point pq buttons select the desired item and then

press the SELECT button.

Normal

Provide the image at the normal computer aspect ratio of 4:3.

True

Provide the image in its original size. When the original image size is larger than the screen size (1024 x 768), the projector enters to the panning mode automatically. Use the Point pqt u buttons to pan the image. When adjusted, the arrows will turn red. When reached to the correction limits, the arrows will disappear.

Wide

Provide the image to fit the wide video aspect ratio (16:9) by expanding the image width uniformly. This function can be used to provide the squeezed video signal at 16:9.

PNote:

• The projector cannot display any resolution higher than 1920 x 1200. If your computer’s screen resolution is higher than 1920 x 1200, lower the resolution before connecting the projector.

• The image data other than XGA (1024 x 768) is modified to fit the screen size in initial mode.

• True, Full and Digital zoom +/– cannot be selected when no signal is detected in the PC System Menu. (p.36)

Full

Provides the full screen image.

Computer Input

Custom

Adjust the screen scale and position manually with this function. Press the Point u button at Custom and the Custom is displayed on the screen, you can use the Point pq buttons to choose the item you want to adjust.

Scale H/V ............. Adjust the Horizontal/Vertical screen scale.

H&V ...................... When set to On, the aspect ratio is fixed.

Scale V appears dimmed and becomes unavailable. Adjust Scale H, then the screen scale is automatically modified based on the

aspect ratio.

Position H/V ........ Adjust the Horizontal/Vertical screen position.

Common .............. Save the adjusted scale to all the inputs.

Press the SELECT button at Common to

display a confirmation box. To save the scale,

press the SELECT button at yes. When

Custom is selected, the saved scale is used.

Reset ................... Reset the all adjusted values. Press the

SELECT button at Reset to display a

confirmation box. To reset, press the SELECT

button at yes.

Digital zoom +

Custom

PNote:

• When no signal is detected, Normal is set automatically and the Aspect dialog box disappears.

• The adjustable range for Scale H/V and Position H/V is limited depending on the input signal.

Select Digital zoom +. The On-Screen Menu disappears and D. zoom + appears. Press the SELECT button to expand the

image size. Use the Point pqt u buttons to pan the image. The Panning function can work only when the image is larger than the screen size. You can also enter the Digital zoom + mode by pressing the D.ZOOM button on the remote control.

Digital zoom -

Select Digital zoom – . The On-Screen Menu disappears and D. zoom – appears. Press the SELECT button to compress image

size. You can also enter the Digital zoom - mode by pressing the D.ZOOM button on the remote control.

To exit the Digital zoom +/– mode, press any button except the D.ZOOM button, SELECT and Point buttons.

To return to the previous screen size, select a screen size from the Screen Size Adjustment Menu or select an input source from the Input Source Selection Menu (see pages 33-35) again or adjust the screen size with the D.ZOOM button.

PNote:

• The panning function may not operate properly if the stored Mode in the PC adjust Menu is used (p.39).

• The minimum compression ratio is limited depending on the input signal, when the Keystone function is working or when the custom is selected for the screen size.

• True, Full and Digital zoom +/– cannot be selected when 480i, 575i, 480p or 575p is selected in the PC System Menu (p.36).

• Digital zoom +/- cannot be selected when Full or True is selected.

• Digital zoom – cannot be operated when Custom is selected.

Computer Input

Keystone

This function is used to adjust keystone distortion of the projected image. Use the Point pq buttons to choose the item you want to adjust.

t Keystone correction To correct keystone distortion, press the SELECT button.

Keystone appears on the screen. Use the Point correct keystone distortion (p.31). t Store or Reset

To store or reset the keystone correction, press the Point button.

Store .......Keep the keystone correction even when the AC

power cord is unplugged.

Reset ......Release the keystone correction when the AC

power cord is unplugged.

buttons to

Keystone

Ceiling

When this function is set to On, the picture will be top/bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector.

Rear

When this function is set to On, the picture will be left/right reversed. This function is used to project the image from rear of the screen.

Reset

This function returns all adjusted values to the factory default settings. Press the SELECT button at Reset to display a confirmation box. To reset, press the SELECT button at “Yes.”

Ceiling

Rear

Video Input

Video System Selection

Press the MENU button to display the On-Screen Menu. Use

the Point pq buttons to select Input and then press the Point u or the SELECT button.

Use the Point pq buttons to select Video, S-video or Computer

1(Component) and then press the SELECT button.

Use the Point pq buttons to select System and then press

the Point u or the SELECT button. Use the Point pq buttons to select the desired system and then press the SELECT button.

Video jack or S-video jack

Auto

The projector automatically detects an incoming video system, and adjusts itself to optimize its performance. When Video System is PAL-M or PAL-N, select the system manually.

AV System Menu (Video or S-video)

PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N

If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC,

NTSC 4.43, PAL-M, and PAL-N.

y, Pb/Cb, Pr/Cr jacks

Auto

The projector automatically detects an incoming video signal, and adjusts itself to optimize its performance. When the Video System is 1035i, 1080i or 1080p, select the system manually.

y, Pb/Cb, Pr/Cr SIGNAL FORMAT

If the projector cannot reproduce proper video image, select a specific component video signal format from among 480i, 575i,

480p, 575p, 720p, 1035i, 1080i, and 1080p.

AV System Menu (y, Pb/Cb, Pr/Cr)

Input 1 RGB(PC analog) Input 2 RGB Input 3 Y, Pb/Cb, Pr/Cr

System Auto

PNote:

The AV System Menu cannot be selected when selecting RGB (Scart).

Video Input

Image Level Selection

Menu Operation

Press the MENU button to display the On-Screen Menu. Use

the Point pq buttons to select Image select and then press the Point u or the SELECT button.

Use the Point pq buttons to select the desired item and

then press the SELECT button.

Standard

Normal picture level preset on the projector.

Cinema

Picture level adjusted with fine tone.

Image 1–10

User preset picture adjustment in the Image adjust Menu. (p.48)

Image select Menu

Standard Cinema Image 1 Image 2 Image 3 Image 4 Image 5 Image 6 Image 7 Image 8 Image 9 Image 10

Standard

Cinema Image 1 Image 2 Image 3 Image 4 Image 5 Image 6 Image 7 Image 8 Image 9 Image 10

Image Adjustment

Video Input

Press the MENU button to display the On-Screen Menu. Use

the Point pq buttons to select Image adjust and then press the Point u or the SELECT button.

Use the Point pq buttons select the desired item and then

press the SELECT button to display the adjustment dialog box. Use the Point t u buttons to adjust the setting value.

Contrast

Press the Point t button to decrease the contrast; press the Point u button to increase the contrast (from 0 to 63).

Brightness

Press the Point t button to decrease the brightness; press the Point u button to increase the brightness (from 0 to 63).

Color

Press the Point t button decrease the intensity of the color; press the Point u button increase the intensity of the color (from 0 to 63).

Image adjust Menu

Selected Image mode

Tint

Press the Point t u buttons to adjust the tint value to get a proper color balance (from 0 to 63).

Color temp.

Use the Point t u buttons to select the desired Color temp. level (XLow, Low, Mid or High ).

White balance (Red)

Press the Point t button to lighten red tone; press the Point button to deepen red tone (from 0 to 63).

White balance (Green)

Press the Point t button to lighten green tone; press the Point u button to deepen green tone (from 0 to 63).

White balance (Blue)

Press the Point t button to lighten blue tone; press the Point u button to deepen blue tone (from 0 to 63).

PNote:

• When White balance Red, Green or Blue is adjusted, the Color temp. level will change to Adj.

• Tint cannot be selected when the video system is PAL, SECAM, PAL-M or PAL-N (p.45).

Use the Point t u buttons to adjust the setting value.

Video Input

Offset(Red/Green/Blue)

Press the Point t button to lighten red/green/blue tone of the black level of an image; press the Point u button to deepen red/green/ blue tone of the black level of an image (from 0 to 63).

Sharpness

Press the Point t button to decrease the sharpness of the image; press the Point u button to increase the sharpness of the image (from 0 to 31).

Gamma

Use the Point t u buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15).

Noise reduction

Noise interference on the screen can be reduced. Press the Point t u buttons to change the noise reduction mode.

Off ........... Noise reduction mode is Off.

On ........... Noise reduction mode is On.

Progressive

An interlaced video signal can be displayed in progressive mode. Press the Point t u buttons to change the progressive scan mode.

Off ........... Progressive scan mode is Off.

On ........... Progressive scan mode is On.

Film ......... For watching a film. With this function, the projector

reproduces pictures faithful to the original film quality.

Reset

To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select yes. All adjustments will return to their previous figures.

Store

To store the adjusted data, select Store and press the Point u or the SELECT button. Use the Point pq buttons to select one from Images 1 to 10 and press the SELECT button. A confirmation box appears and then select yes. Stored data can be called up by selecting an Image (1-10) in the Image Mode Selection on page 46.

PNote:

• Noise reduction and Progressive cannot be selected when Video delay control is set to On (p.61).

• Progressive cannot be selected when 480p, 575p, 720p or 1080p is selected (p.45).

• Noise reduction cannot be selected when 1080p is selected (p.45).

Store

A confirmation box appears and then select yes.

Screen Size Adjustment

Press the MENU button to display the On-Screen Menu. Use

the Point pq buttons to select Screen and then press the Point u or the SELECT button.

Use the Point pq buttons to select the desired item

and then press the SELECT button.

Normal

Provide the image to fit the screen size while maintaining the aspect ratio of input signal.

Wide

Provide the image at the 16:9 wide screen ratio.

Custom

Video Input

Custom

Scale H/V ............. Adjust the Horizontal/Vertical screen scale.

H&V ...................... When set to On, the aspect ratio is fixed.

Scale V appears dimmed and becomes unavailable. Adjust the Scale H, then the screen scale is automatically modified based

on the aspect ratio.

Position H/V ........ Adjust the Horizontal/Vertical screen position.

Common .............. Save the adjusted scale to all the inputs.

Press the SELECT button at Common to

display a confirmation box. To save the scale,

press the SELECT button at yes, When

Custom is selected, the saved scale is used.

Reset ................... Reset the all adjusted values. Press the

SELECT button at Reset to display a

confirmation box. To reset, press the SELECT

button at “Yes”.

PNote:

• When no signal is detected, Normal is set automatically and the Aspect dialog box disappears.

• The adjustable range for Scale H/V and Position H/V are limited depending on the input signal.

• Wide cannot be operated when 720p, 1035i, 1080i or 1080p is selected on AV System Menu (p.45).

Video Input

Keystone

This function is used to adjust keystone distortion of the projected image. Use the Point pq buttons to choose the item you want to adjust.

t Keystone correction To correct keystone distortion, press the SELECT button.

Keystone appears on the screen. Use the Point correct keystone distortion (p.31). t Store or Reset To store or reset the keystone correction, press the Point button.

Store ........Keep the keystone correction even when the AC

power cord is unplugged.

Reset .......Release the keystone correction when the AC

power cord is unplugged.

buttons to

Ceiling

When this function is set to On, the picture will be top/bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector.

Rear

Keystone

Ceiling

When this function is set to On, the picture will be left/right reversed. This function is used to project the image from rear of the screen.

Reset

This function returns all adjusted values to the factory default settings. Press the SELECT button at Reset to display a confirmation box. To reset, press the SELECT button at “Yes.”

Rear

Setting

This projector has a Setting menu that allows you to set up the other various functions described below.

Press the MENU button to display the On-Screen Menu.

Press the Point pq buttons to select Setting and press the Point u or the SELECT button to access the submenu items.

Use the Point pq buttons to select the desired item and

then press the Point u or the SELECT button to access the selected item.

Use the Point pq buttons to select the desired item and

then press the SELECT button.

Language

The language used in the On-Screen Menu is available in English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Russian, Chinese, Korean and Japanese.

Menu position

This function is used to change the position of the On-Screen Menu. Select Menu position and press the SELECT button.

Setting Menu

Language

The Menu position changes each time you press the SELECT button as follows. the top left ‡ the top right ‡ the center ‡ the bottom left ‡ the

bottom right ‡the top left ‡.....

Input button

This function detects the input signal automatically. When a signal is found, the search will stop. Use the Point pq buttons to select one of the following options.

Mode 1......Input search will not work.

Mode 2......Input search works under the following situation:

– When pressing the INPUT button on the side control. or the remote control.

Mode 3......Input search works under the following situation:

– When turning on the projector by pressing the ON/

STAND-BY button on the side control or pressing the ON button on the remote control.

– When pressing the INPUT button on the remote

control or on the side control.

- When no signal is detected.

PNote:

•While Input button is set to Mode 3, and no signal is detected, if the No Show or Freeze function is active, cancel it to activate the Input search.

•While Input button is set to Mode 1 or Mode 2, the status of Input and Lamp are displayed every time the signal is switched.

•Only the last selected input source can be detected.

•If the INPUT, INPUT 1, INPUT 2, INPUT 3, ON / STANDBY or MENU button is pressed during Input search is in progress, Input search will stop and go back to the previous input signal.

Setting

Display

This function decides whether to display On-Screen Displays.

On ............................... Show all the On-Screen displays. Use this

function when you want to project images after the lamp becomes bright enough. The factory default setting is in this option.

Countdown Off .......... Show the input image instead of the

countdown when turning on the projector. Use this function when you want to project the image as early as possible even when the lamp is not bright enough.

Off ............................... Hide the On-Screen Displays except;

Screen Menu (p.42)

On-Screen Menu

Power off? (p.24)

No signal for Power management.

(p.57)

Please wait ...

Arrows for the True function in the

P-timer

Simple mode

Logo select

Background

Select the background screen for when no input signal is detected. Press the Point pq buttons to switch between each option.

Blue .... Project a blue background.

Black ... Project a black background. It is invalid when there is no image.

User .... Project an image captured in the Logo setting.

Logo (Logo and Logo PIN code lock settings)

This function allows you to customize the screen logo with Logo select, capture, Logo PIN code lock and Logo PIN code change functions.

Note:

When On is selected in the Logo PIN code lock function, Logo select,

Capture and Logo PIN code change cannot be selected.

Logo select

This function decides on the starting-up display from among following options.

User .......... Show the image you captured.

Default ...... Show the factory-set logo.

Off ............. Show the countdown display only.

Off

Capture

This function enables you to capture an image being projected to use it for a starting-up display or interval of presentations.

Select Capture and press the SELECT button. A confirmation box appears and select yes to capture the projected image.

After capturing the projected image, go to the Logo select function and set it to User. Then the captured image will be displayed the next time you turn on the projector.

To cancel the capture function, select yes in the "Quit?" confirmation box.

PNote:

• Before capturing an image, select Standard in the Image Select Menu to capture a proper image (pp.40, 46).

• A signal from a computer can be captured up to XGA (1024 x

768). A signal from video equipment can be captured except for 720p, 1035i, 1080i and 1080p.

• When capturing the image that has been adjusted by the Keystone function, the adjusted data is automatically reset and the projector captures an image without keystone correction.

• When Logo PIN code lock is set to On, Capture cannot be selected.

• When starting to capture a new image, the previously stored image is cleared even if you cancel the capturing.

• When there is no captured image or it is interrupted while capturing an image, User cannot be selected, you can only switch between Default and Off.

Setting

Capture

Logo select

Off

Logo PIN code lock

This function prevents an unauthorized person from changing the screen logo.

Off ............. The screen logo can be changed freely from the

Logo Menu (p.52).

On ............. The screen logo cannot be changed without a Logo

PIN code.

If you want to change the Logo PIN code lock setting, press the SELECT button and the Logo PIN code dialog box appears. Enter a Logo PIN code by following the steps below. The initial Logo PIN

code is set to "4321" at the factory.

Logo PIN code lock

Logo select

Off

Setting

Enter a Logo PIN code

Use the Point pq buttons to enter a number. Press the Point u button to fix the number and move the red frame pointer to the next box. The number changes to ⁄. If you fixed an incorrect number, use the Point to correct, and then enter the correct number.

Repeat this step to complete entering a four-digit number. After entering the four-digit number, move the pointer to Set. Press

the SELECT button so that you can start to operate the projector. If you entered an incorrect Logo PIN code, Logo PIN code and

the number (⁄⁄⁄⁄) will turn red for a moment. Enter the correct Logo PIN code all over again.

u button to move the pointer to the number you want

Change the Logo PIN code lock setting

Use the Point pq buttons to switch On or Off, and then press the SELECT button to close the dialog box.

Enter a Logo PIN code

After a correct Logo PIN code is entered, the following dialog box appears.

Change the Logo PIN code lock setting

Logo select

Off

Change the Logo PIN code

Logo PIN code change

Logo PIN code can be changed to your desired four-digit number. Press the Point q button to select Logo PIN code change and then press the SELECT button. The Current logo PIN code dialog box appears. Use the Point pq buttons to set the current logo PIN code. The New logo PIN code dialog box appears. Set a new Logo PIN code, the confirmation box appears, and choose Yes to set the new Logo PIN code.

Be sure to note the new Logo PIN code and keep it on hand. If you lost the number, you could no longer change the Logo PIN code setting. For details on PIN code setting, refer to "PIN code lock" on pages 59-60.

CAUTION: WHEN yOU HAVE CHANGED THE LOGO PIN CODE, WRITE DOWN THE NEW PIN CODE IN COLUMN OF THE LOGO PIN CODE NO. MEMO ON PAGE 84, AND KEEP IT SECURELy. SHOULD THE LOGO PIN CODE BE LOST OR FORGOTTEN, THE LOGO PIN CODE SETTING CAN NO LONGER BE CHANGED.

Logo select

Lamp control

Setting

Lamp control

This function allows you to change brightness of the screen.

Auto . . . . . Brightness according to the input signal.

Normal . . . Normal brightness.

Eco 1 . . . . Lower brightness and decrease of fan speed.

Lower brightness reduces the lamp power consumption and extends the lamp life.

Eco 2 . . . . Lower brightness and increase of fan speed.

Lower brightness reduces the lamp power consumption and extends the lamp life. It is recommended to use Eco 2 when using the projector continuously over a long period of time. The fan noise becomes louder in Eco 2 than in Eco 1. Select the suitable mode for the used environment.

PNote:

The fan noise becomes louder in Eco 2 than in Eco 1. Select the suitable mode for the used environment.

Lamp life control

Select the lamp operation when the total lighting time of a lamp exceeds the recommended total hours of use.

Mode 1 ............ A lamp can be turned on even after

exceeding the recommended total hours of

use.

Mode 2 ............ A lamp can be turned on even after

exceeding the recommended total hours of use. But the projector turns off automatically after 3 minutes.

PNote:

• Lamp mode cannot be changed for a while after turning on the projector. Lamp needs some time to stabilize after the power is turned on. Stored lamp mode will be active after the lamp is stabilized.

• If Mode 2 has been selected and the projection lamp

exceeds the recommended total hours of use, the replacement icon will be displayed at the time of power-on. Then the projector will turn off after 3 minutes.

Lamp life control

Lamp replacement icon

The Lamp replacement icon will not appear when the Display

function is set to Off (p.52), during "Freeze" (p.30) or "No show" (p.29).

Setting

Fan control

Choose the running speed of cooling fans from the following options.

Normal ...... Operate in this mode under normal conditions.

Max ........... Use this mode when you want to increase the cooling

effect when operating the projector in high ambient temperature environment. Fan noise is louder than

Normal.

Simple mode

This function decides whether to activate the simple mode.

Off .... Simple mode function is off.

On .... Only the simple mode buttons are active.

PNote:

Warning icon and Simple mode : On message appear on the screen when press the button which is not the simple mode button.

Simple mode buttons

Remote control

The eight different remote control codes (Code 1-Code 8) are assigned to the projector; the factory-set, initial code (Code 1) and the other seven codes (Code 2 to Code 8). The same code should be set on both the projector and the remote control. For example, operating the projector in Code 7, the remote control code also must be switched to Code 7.

To change the code for the projector Select a remote control code in this Setting Menu.

To change the code for the remote control: Press and hold the MENU button and a number button (1-8) on the remote control for more than five seconds to switch between the codes. See “Remote Control Code” on page 16.

PNote:

• When different codes are set on the projector and on the remote control, any operation cannot be made. In that case, switch the code on the remote control to fit the code on the projector.

• If the batteries are removed from the remote control for a long period of time, the remote control code will be reset.

Only these buttons are active when the simple mode is set to On. [ON, STAND-BY, INPUT, AUTO PC, INFO., MENU, SCREEN, pqt u, SELECT, NO SHOW, VOL.+, VOL.-, MUTE, RESET/ON/ ALL-OFF switch] Number buttons (p.14) also become active only when setting the remote control codes numbers or entering the PIN code numbers (pp. 54, 60).

RC sensor

Select a location of the infrared remote receiver of the remote control. See “Remote Control Receivers and Operating Range” on page 15 for details.

All ............ Activate all of the receivers.

Front & Top......Activate both the front and top receivers.

Top & Back ......Activate both the top and back receivers.

Front & Back ....Activate both the front and back receivers.

Front ....... Activate only the front receiver.

Top .......... Activate only the top receiver

Back ........ Activate only the back receiver.

Power management

For reducing power consumption as well as maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not operated for a certain period. Select one of the following options:

Ready .................. When the lamp has been fully cooled down, the

POWER indicator changes to green blinking. In this condition, the projection lamp will be turned on if the input signal is reconnected or any button on the side control or remote control is pressed.

Shut down ........... When the lamp has been fully cooled down, the

power will be turned off.

Off ........................ Power management function is off.

Setting

Power management

Timer left before Lamp is off.

Timer.................... If the input signal is interrupted and no button

is pressed for more than 30 seconds, the timer display with No signal appears. It starts the countdown until the lamp is turned off. Use the Point

pq buttons to set the Timer(1~30Min).

PNote:

Factory default is Ready: 5 Min.

Standby mode

This function is available when operating the projector via network.

Network .......... Supply the power to the network function

even after turning off the projector. You can turn on/off the projector via network, modify network environment, and receive an e-mail about projector status while the projector is powered off.

Eco.................... Select Eco when you do not use the projector

via network. The projector’s network function will stop when turning off the projector.

Refer to the owner’s manual of “Network Set-up and Operation”.

PNote:

• Factory default is Network.

• When selecting Network, the cooling fans may be running depending on the temperature inside the projector even if the projector is turned off.

Min

Setting

When this function is set to On, the projector will be automatically turned on just by connecting the AC power cord to the wall outlet.

PNote:

Be sure to turn off the projector properly (see “Turning Off

You can emphasize a part of the projected image with this function. Use the Point Finger, or Dot) (p.32)

On start

the Projector” on page 24). If the projector is turned off in the incorrect sequence, the On start function does not work properly.

Pointer

P-TIMER

pq buttons to select a pattern of the Pointer (Arrow,

P-timer display

P-timer

This function allows you to change the presentation of the P-timer and execute it.

Select one of the following options:

Count up ............. The P-timer display 000:00 appears on the

screen and the count starts (000:00–180:00)

Count down ........ The time set in the Timer setting appears on the

screen and the countdown starts.

Timer.................... Use the Point

(1–180 Min). Only set to Count down, Timer is active. Factory default velue is 10 Min.

Start ..................... It executes the count up or count down

function. Press the SELECT button at Start, Start changes to Stop in the Screen Menu. At that time, press the SELECT button at Stop to stop Count up or Count down, and Stop changes to Restart in the Screen Menu. Press the SELECT button at Restart to resume

Count up or Count down.

Reset ................... Reset the P-timer values.

Press the SELECT button at Reset to return to

the following value; Count up ... "000:00" Count down ... Timer that you set

Exit ....................... To exit the P-timer operation.

Stop or Cancel the P-timer via Remote Control

To stop the P-timer, press the P-TIMER button. To cancel the P-timer, press and hold the P-TIMER button for a few seconds.

pq buttons to set the Timer

P-Timer

Count up

Count down

Timer 30 Min Start Reset Exit

P-Timer

Count up Count down

Timer 30 Min

Start Reset Exit

min

Setting

Security (Key lock and PIN code lock)

This function allows you to use the Key lock and PIN code lock function to set the security for the projector operation.

Key lock

This function locks the side control and remote control buttons to prevent operation by unauthorized persons.

......Unlocked.

......Lock the operation of the side control.

To unlock, use the remote control.

......Lock the operation of the remote

control. To unlock, use the side control.

If the side control accidentally becomes locked and you do not have the remote control nearby or there is something wrong with your remote control, contact the dealer where you purchased the projector or the service center.

Key lock

Off

PIN code lock

This function prevents the projector from being operated by unauthorized persons and provides the following setting options for security.

Off .....Unlocked.

On1 .....Enter the PIN code every time turning on

the projector.

On2 .....Enter the PIN code to operate the projector

once the power cord is disconnected; as long as the AC power cord is connected, the projector can be operated without a PIN code.

Whenever you change the PIN code lock setting or the PIN code (the four-digit number), you are required to enter the PIN code. The "1234" is set as the initial PIN code at the factory.

If you want to change the PIN code lock setting, Press the SELECT button and the PIN code dialog box appears.

Off

PIN code lock

Off

Setting

Enter a PIN code

Repeat this step to complete entering a four-digit number.

After entering the four-digit number, move the pointer to Set. Press the SELECT button so that you can start to operate the projector.

If you entered an incorrect PIN code, PIN code and the number (⁄⁄⁄⁄) will turn red for a moment. Enter the correct PIN code all over again.

Enter a PIN code

t button to move the pointer to the number

Change the PIN code lock setting

Use the Point pq buttons to select Off, On1 or On2. Press the SELECT button to close the dialog box.

PIN code change

The PIN code can be changed to your desired four-digit number. Press the Point the SELECT button. The Current PIN code dialog box appears. Use the Point New PIN code dialog box appears. Set a new PIN code, the confirmation box appears, and choose Yes to set the new PIN code.

CAUTION: WHEN yOU HAVE CHANGED THE PIN CODE, WRITE DOWN THE NEW PIN CODE IN COLUMN OF THE PIN CODE NO. MEMO ON PAGE 84, AND KEEP IT SECURELy. IF yOU FORGET yOUR PIN CODE, THE PROjECTOR CAN NO LONGER BE STARTED.

q button to select PIN code change and press

pq buttons to set the current PIN code. The

Change the PIN code

Off

Closed caption

Closed Caption is a printed version of the program sound or other information displayed on the screen. If the input signal contains closed captions, you can turn on the feature and switch the channels. Press the Point

buttons to select Off, CC1, CC2, CC3 or CC4. If the closed caption is not clear, you can change the text from Color to White.

✔ Note:

The Closed Caption is available only under the situation below.

•When the input signal is NTSC of composite and S-video, and the system is set according to the signal or set on Auto.

•The system must be set on NTSC or Auto in Video System Selection. (P.39)

•The icon of Closed Caption is displayed in gray while

it is not available.

•The Closed caption is unavailable when On-Screen

menu and P-Timer are displayed.

Setting

Video delay control

When you want to make a digital processing of a projected image faster, set this function. Use the Point

pq buttons to select On or Off.

PNote:

Noise reduction and Progressive can not be selected when Video delay control is set to On.

Press the Point ed buttons to select Off, CC1, CC2, CC3 or CC4, and then Press SELECT button.

Setting

Filter counter

This function is used to set a frequency for the filter cartridge replacement.

Filter counter

Use the Point the Point

Filter counter...... Show the total accumulated time of the filter

cartridge.

Timer ................

Filter counter reset...When replacing the Filter cartridge, reset the

Fig.1 Filter warning icon

pq buttons to select Filter counter and then press

u or the SELECT button to access the submenu items.

To set a timer, when the projector reaches the time, the Filter warning icon (Fig. 1) appears on the screen and the total accumulated time turns red, indicating that the filter cartridge replacement is necessary.

Filter counter (p.65).

Filter warning icon appears on the screen at a set time.

Test pattern

Press the SELECT button to select Timer and then use the Point pq buttons to set the timer. Select from (Off/ 600H/900H/1200H/1500H/1800H/2000H) depending on the use environment.

PNote:

• Fig.1 appears at turning on and selecting input

source.

• Fig.1 will not appear when the Display function is set to Off (p.52), during “Freeze” (p.30) or No show (p 29).

Various test pattern are available for use when setting up the projector.

Factory default

This function returns all setting values except for User logo, PIN code lock, Logo PIN code lock, Lamp counter, and Filter counter to the factory default settings.

Maintenance and Care

Filter Instructions

Filter prevents dust from accumulating on the optical elements inside the projector. Should the filter becomes clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup and adversely affect the life of the projector.

If the projector reaches a time set in the timer setting (p.62), a Filter warning icon (Fig.1) appears on the screen and the WARNING FILTER indicator on the top panel lights up (p.78). When you see this icon, replace the filter cartridge as soon as possible (pp.30,

56). All the indicators except Lamp indicator blink fast when the projector detects an abnormal condition, or the filter cartridge is not installed properly (p.78).

PNote:

• Fig.1 will not appear when the Display function is set to Off (p.52), or during “Freeze” (p.30) or “No show” (p 29).

• The filter cartridge is disposable. Do not clean and reuse the filter cartridge.

• Do not expose the filter cartridge to water or liquid, or it may cause a breakdown.

• Do not use the filter cartridge with other projector.

• Make sure that the projection lamp is turn off when you are replacing the filter cartridge. If you replace the filter cartridge when the projection lamp is turn on, the projector will be shut down automatically for safety purpose.

Fig.1 Filter warning icon

Filter warning icon appears on the screen at a set time.

Maintenance and Care

Turn off the projector, and unplug the AC power cord from the

AC outlet. First, clean up the dust on the projector and around the air

vents. Press q downwards on the filter cover to release the latch

and open the filter cover. Pull out the filter cartridge. When taking out the filter cartridge,

put your finger on the filter cartridge’s tab and then pull.

Put the new one back into the position and close the filter

cover. Make sure that the filter cartridge is properly and fully inserted.

Connect the AC power cord to the projector and turn on the

projector. Reset the filter counter (p.65).

Replacing the Filter Cartridge

Filter cover

Latch

CAUTION

Make sure the filter cartridge is inserted in the projector. If the filter cartridge is not inserted, the projector cannot be turned on. Do not put anything into the air vents. Doing so may result in malfunction of the projector.

RECOMMENDATION

We recommend avoiding dusty/smoky environments when operating the projector. Usage in these environments may cause a poor image quality.

When using the projector under dusty or smoky conditions, dust may accumulate on a lens, liquid crystal panels, or optical elements inside the projector. Such condition may degrade the quality of the projected image. When the symptoms above are noticed, contact your authorized dealer or service center for proper cleaning.

ORDER REPLACEMENT FILTER CARTRIDGE

Replacement filter cartridge can be ordered through your dealer. When ordering, give the following information to the dealer.

ü Model No. of your projector

Tab

Filter cartridge

PLC-XM80, PLC-XM80L

ü Replacement Filter Cartridge Type No.

POA-FIL-081

(Service Parts No. 610 349 8317)

Resetting the Filter Counter

Maintenance and Care

Be sure to reset the Filter counter after cleaning or replacing the filter.

Press the MENU button to display the On-Screen Menu. Use

the Point Point

Use the Point pq buttons to select Filter counter and then

press the SELECT button. Use the Point select Filter counter Reset and then press the SELECT button. Filter counter Reset? appears. Select yes to continue.

Another confirmation dialog box appears, select yes to reset

the Filter counter.

pq buttons to select Setting and then press the

u or the SELECT button.

pq buttons to

Filter counter

Filter counter Reset?

appears. Select yes, then another

confirmation box appears. Select yes again to reset

the Filter counter.

Maintenance and Care

Lamp Replacement

When the projection lamp of the projector reaches its end of life, the Lamp replacement icon appears on the screen and the Lamp replacement icon appears on the screen andthe Lamp replacement icon appears on the screen and LAMP REPLACE indicator lights orange. Replace the lamp with a new one promptly. The timing when the LAMP REPLACE indicator should light is depending on the lamp mode.

Top Panel

Lamp cover

Lamp replacement icon

LAMP REPLACE indicator

PNote:

The Lamp replacement icon will not appear when the Display function is

set to Off (p.52), during "Freeze" (p.30) or "No show" (p.29).

Follow these steps to replace the lamp.

Turn off the projector and unplug the AC power cord. Let the

projector cool for at least 45 minutes. Loosen the screw and open the lamp cover. Loosen 3 screws

of the lamp and pull out the lamp by using the built in handle. Replace the lamp with a new one. Make sure that the lamp is

properly and fully inserted. Close the lamp cover and secure the screw.

Connect the AC power cord to the projector and turn on the

projector.

PNote:

Be sure to insert the lamp in the correct direction.

Screw

Screws

Handle

Lamp

CAUTION

When replacing the lamp because it has stopped illuminating, there is a possibility that the lamp may be broken. If replacing the lamp of a projector which has been installed on the ceiling, you should always assume that the lamp is broken, and you should stand to the side of the lamp cover, not underneath it. Remove the lamp cover gently. Small pieces of glass may fall out when the lamp cover is opened. If pieces of glass get into your eyes or mouth, seek medical advice immediately.

CAUTION

Allow a projector to cool for at least 45 minutes before you open the lamp cover. The inside of the projector can become very hot.

For continued safety, replace with a lamp of the same type. Do not drop the lamp or touch the glass bulb! The glass can shatter and may cause injury.

New Lamp

CAUTION

Maintenance and Care

LAMP HANDLING PRECAUTIONS

This projector uses a high-pressure lamp which must be handled carefully and properly. Improper handling may result in accidents, injury, or create a fire hazard.

ü Lamp lifetime may differ from lamp to lamp and according to the environment of use. There is no

guarantee of the same lifetime for each lamp. Some lamps may fail or terminate their lifetime in a shorter period of time than other similar lamps.

ü If the projector indicates that the lamp should be replaced, i.e., if the LAMP REPLACE indicator lights

up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down. (Follow carefully the instructions in the Lamp Replacement section of this manual.) Continuous use of the lamp with the LAMP REPLACE indicator lighted may increase the risk of lamp explosion.

ü Lamp may explode as a result of vibration, shock or degradation as a result of hours of use as its

lifetime draws to an end. Risk of explosion may differ according to the environment or conditions in which the projector and lamp are being used.

IF A LAMP EXPLODES, THE FOLLOWING SAFETy PRECAUTIONS SHOULD BE TAKEN.

If a lamp explodes, disconnect the projector’s AC plug from the AC outlet immediately. Contact an authorized service center for a checkup of the unit and replacement of the lamp. Additionally, check carefully to ensure that there are no broken shards or pieces of glass around the projector or coming out from the cooling air circulation holes. Any broken shards found should be cleaned up carefully. No one should check the inside of the projector except those who are authorized trained technicians and who are familiar with projector service. Inappropriate attempts to service the unit by anyone, especially those who are not appropriately trained to do so, may result in an accident or injury caused by pieces of broken glass.

ORDER REPLACEMENT LAMP

Replacement lamp can be ordered through your dealer. When ordering, give the following information to the dealer.

ü Model No. of your projector : PLC-XM80, PLC-XM80L ü Replacement Lamp Type No. : POA-LMP137

(Service Parts No. 610 347 5158)

Maintenance and Care

Cleaning the Projection Lens

Unplug the AC power cord before cleaning. Gently wipe the projection lens with a cleaning cloth that

contains a small amount of non-abrasive camera lens cleaner, or use a lens cleaning paper or commercially available air blower to clean the lens.

Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents, or other harsh chemicals might scratch the surface of the lens.

Cleaning the Projector Cabinet

Unplug the AC power cord before cleaning. Gently wipe the projector body with a soft dry cleaning cloth.

When the cabinet is heavily soiled, use a small amount of mild detergent and finish with a soft dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents, or other harsh chemicals might scratch the surface of the cabinet.

When the projector is not in use, put the projector in an appropriate carrying case to protect from dust and scratches.

CAUTION

Do not use any flammable solvents or air sprays on the projector and in its vicinity. The explosion or fire hazard may occur even after the AC power cord is unplugged because the temperature inside the projector is extremely high due to the lamps. In addition, there is a risk that the internal parts may be damaged not only by the flammable air spray but also by the cold air.

Maintenance and Care

Warning Indicators

The WARNING indicators show the state of the function which protects the projector. Check the state of the WARNING indicators and the POWER indicator to take proper maintenance.

The projector is shut down and the WARNING TEMP. indicator is blinking red.

When the temperature inside the projector reaches a certain level, the projector will be automatically shut down to protect the inside of the projector. The POWER indicator is blinking while the projector is being cooled down. When the projector has cooled down enough (to its normal operating temperature), it can be turned on again by pressing the ON/STAND-BY button.

PNote:

The WARNING TEMP. indicator continues to blink even after the

temperature inside the projector returns to normal. When the projector is turned on again, the WARNING TEMP. indicator stops blinking.

Then check the matters below:

– Did you provide appropriate space for the projector to be

ventilated? Check the installing condition to see if the air vents of the projector are not blocked.

– Has the projector been installed near an Air-Conditioning/

Heating Duct or Vent? Move the installation of the projector away from the duct or vent.

– Is the filter clean? Replace the filter with a new one.

Top Panel

WARNING TEMP. blinking red

The projector is shut down and the LAMP indicator is lighting and other indicators are blinking.

When the projector detects an abnormal condition, it will be automatically shut down to protect the inside of the projector and the LAMP indicator lights on and other indicators blink. In this case, unplug the AC power cord and plug it, and then turn on the projector once again to verify operation. If the projector cannot be turned on and these indicators are still lighting and blinking, unplug the AC power cord and contact the service center.

CAUTION

DO NOT LEAVE THE PROJECTOR WITH THE AC POWER CORD CONNECTED UNDER AN ABNORMAL CONDITION. IT MAY RESULT IN FIRE OR ELECTRIC SHOCK.

Top Panel

LAMP indicator lights on and other indicators blink.

Appendix

Troubleshooting

Before calling your dealer or service center for assistance, check the items below once again.

1. Make sure you have properly connected the projector to peripheral equipment as described on pages 19-21.

2. Check the cable connection. Make sure that all computers, video equipment, and power cords are properly connected.

3. Make sure that all power is switched on.

4. If the projector still does not produce an image, restart your computer.

5. If an image still does not appear, disconnect the projector from your computer and check your computer monitor’s display. A problem may be noticed with your graphics controller rather than with the projector. (When you reconnect the projector, be sure to turn the computer and monitor off before you turn on the projector. Turn on equipment in the order of the projector and computer.)

6. If a problem still persists, check the following solutions.

Problem: Solutions

– Plug the power cord of the projector into the AC outlet. –

Wait until the POWER indicator stops blinking to turn on the projector again. (See page 23)

–

No power.

Check the WARNING TEMP. indicator. If the WARNING TEMP. indicator is blinking, the projector cannot be turned on. (See page 69.)

–

Unlock the Key lock function for the projector. (See page 59)

–

See if the filter cartridge is inserted. (See page 64)

– Check the projection lamp. (See page 66)

PIN code dialog box appears at start-up.

The initial display is not shown.

The initial display is not same with the default one.

When the projector is on and you press the input button, an icon other than the Lamp mode icon appears.

An icon other than Input mode or Lamp mode icon appears.

No image.

appears on the screen

– PIN code lock is being set. Enter a PIN code; the “1234” or numbers PIN code lock is being set. Enter a PIN code; the “1234” or numbers you have set

(See pages 23, 59-60)

– Make sure Off or Countdown Off is not chosen at Display function. (See “Setting” section on page 52)

– Make sure User or Off is not chosen at Logo select function. (See “Setting” section on page 52)

– That is the Filter warning icon. (See pages 62-63)That is the Filter warning icon. (See pages 62-63)

– That is the Lamp replacement icon or the Filter warning icon. (See pages 55, 62-63,That is the Lamp replacement icon or the Filter warning icon. (See pages 55, 62-63,

66)

– Check the connection between your computer or video equipment and the projector. – See if the input signal is correctly output from your computer. Some laptop computers

may need to be changed the setting for monitor output when connected to the

projector. See your computer’s instruction manual for the setting. – It takes about 30 seconds to display an image after turning on the projector. – See if the selected system is corresponding with your computer or video equipment. – Select correct input source once again through menu operation. (See pages 33-35) – Make sure the temperature is not out of Operating Temperature

40˚C]).

- When No show is operating, the image cannot be displayed. Press the NO SHOW button or any other button on the remote control.

–

End of lamp life is approaching. Replace the lamp with a new one promptly. (See

page 66

(41˚F–104˚F [5˚C–

The image is out of focus.

The image is not bright enough.

Appendix

– Adjust the focus of the projector. – Check Projection Lens to see if it needs cleaning.

PNote: Moving the projector from a cool temperature location to a warm temperature

location may result in moisture condensation on Projection Lens. In such cases, leave the projector OFF and wait until condensation evaporates.

– Projecting from excessive slant angle to the screen may cause keystone distortion

and partial imperfect focus.

– Make sure the projection screen is at least 4.3’ (1.3 m) away from the projector. – Check if Contrast or Brightness is adjusted properly. (See pages 41, 47)

– Check if Image level is selected properly. (See pages 40, 46) – Check the Lamp control function. ( See “Setting” section on page 55) – Check the LAMP REPLACE indicator. If it lights, the end of lamp life is approaching.

Replace the lamp with a new one promptly. (See page 66)

The color is strange. The image is Left/Right

reversed. The image is Top/Bottom reversed.

The image is distorted or runs off.

Auto PC adjustment function does not work.

Some displays are not seen during the operation.

The setting does not remain after turning off power.

Power management function does not work.

Image disappears automatically. Capture function does not work.

Some menus cannot be selected.

– Check the Input signal, color system, video system, or computer system mode. – Adjust the Image Level properly. (See pages 40, 46)

– Check the Ceiling / Rear function. (See pages 44, 50)

– Check the Ceiling function. (See pages 44, 50)

– Check PC adjust Menu or Screen Menu and adjust them. – Check the Input signal. Auto PC Adjustment function cannot work when 480p, 575p,

720p, 480i, 575i, 1035i, 1080i or 1080p is selected or when the digital signal is input or when the digital signal is inputor when the digital signal is input

into DVI terminal. (See page 37) – Check the Display function. (see page 52)

– Make sure you selected Store after adjusting settings. Some settings cannot be

stored if not registered with Store function.

– Power management function cannot work while Freeze or No show function is

running. – Check the power management function in the Setting. The power management is setCheck the power management function in the Setting. The power management is set

to On at the factory. – Check the connection to see if there is signal.

– Each of the Video Input and Computer Input has a limit on selectable menus.

No sound

– Check the audio cable connection from audio input source. – Adjust the audio source. – Press the Volume + button. ( See page 28) – Press the Mute button. (See page 28) – Is the image projected? You will hear the sound only when the image is projected.Is the image projected? You will hear the sound only when the image is projected. – Check the Build-in SP function. (See page 28)(See page 28)

Appendix

The power is turned off automatically.

– Power management function runs by initial setting. Check “Setting” section on page

57.

– Do not cover the ventilation slots on the projector. (See pages 4, 6) – Projector may be used in high ambient temperature environment. Make sure the

temperature is not out of Operating Temperature (41˚F–104˚F [5˚C–40˚C]). (See page

69)

you cannot operate with the side control.

The Remote Control does not work.

Wireless mouse function does not work.

Indicators blink or light.

– If the side control is locked at "Key lock" under "Security" of Setting menu, the side

control is not available. Please check “Setting” section on page 59. – Check the batteries.

– Check if the RC sensor is set properly. (See page 57) – Make sure no obstruction is between the projector and remote control. – Make sure you are not too far from the projector when using the remote control.

Maximum operating range is 16.4’ (5m). (See page 15) – Make sure that the remote control code conforms to the projector’s code. (See

“SETTING” section on page 56.) – Unlock the Key lock function for the remote control. (See page 59) – Wireless remote control does not work when the remote control cable is connected to

the projector. (See page 15) – Check if the ALL-OFF switch on the remote control is set to “ON.” – Make sure that the simple mode in the remote control function is set to Off (See page

56).

– Check the cable connection between the projector and your computer. (See pages 19,

32) – Check the mouse setting on your computer. – Turn on the projector before you turn on the computer.

– Check the status of the projector with referring to “Indicators and projector condition” on

pages 76-78.

– Your operation is invalid. Operate correctly.

appears on the screen

Unable to unlock the Logo PIN code lock, Security key lock or Security PIN

– Contact the dealer where you purchased the projector or the service center.

code lock. Forget the Logo PIN code

or Security PIN code.

– Contact the dealer where you purchased the projector or the service center.

WARNING: High voltages are used to operate this projector. Do not attempt to open the cabinet.

If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Specify the model number and explain about the problem. We will advise you how to obtain service.

Computer Input/Video Input

Appendix

Menu Tree

Input

Computer Input

⁄ System displayed in the System Menu varies depending on the input signal.

Input 1

Input 2

Input 3

System

(1)

Mode 1 Mode 2 Mode 3

Mode 4 Mode 5 Mode 6 Mode 7

Mode 8 Mode 9 Mode 10

RGB (PC analog)

RGB (Scart)

RGB (PC digital)

RGB (AV HDCP)

Video

Y, Pb/Cb,Pr/Cr

RGB

Video

Y, Pb/Cb,Pr/Cr

S-video

Sound

Information

Image select

Volume Built-in SP Mute

Input H-sync freq. V-sync freq. Screen Language

Lamp status Lamp counter Filter counter Power management Key lock

PIN code lock Simple mode

Remote control SERIAL NO.

Standard Real Image 1

Image 10

0–63

On/Off On/Off

Image adjust

PNote:

The Menu display varies depending on the input signal.

Contrast Brightness Color temp.

Red Green Blue Offset Sharpness Gamma Reset Yes/No Store

0–63 0–63 XLow Low Mid High Adj 0–63 0–63 0–63 Red/Green/Blue 0–31 0–15

Image 1

Image 10

PC adjust

Auto PC adj. Fine sync. Total dots Position H Position V Current mode Clamp Display area - H Display area - V Reset Mode free Store

0–31

Yes/No

Mode 1

Mode 10 Quit

Appendix

Screen

Video Input

System

Normal True Wide Full

Custom

Digital zoom + Digital zoom -

Keystone

Ceiling Rear

Reset

(2)

Scale H & V Position

Common Reset

Store Reset On/Off On/Off

Auto PAL SECAM NTSC NTSC 4.43 PAL-M PAL-N

H / V On/Off H / V

System

(3)

Auto 1080p 1080i 1035i 720p 575p 480p 575i 480i

Image adjust

PNote:

The Menu display varies depending on the input signal.

Contrast Brightness Color 0–63

Tint 0–63 Color temp.

Red Green Blue Offset Sharpness Gamma Noise reduction Progressive Reset Yes/No Store

0–63 0–63

XLow Low Mid High Adj 0–63 0–63 0–63 Red/Green/Blue 0–31 0–15

Off/On

Off/On/Film

Image 1

Image 10

Image select

Screen

Standard Cinema Image 1

Image 10

Normal Wide

Custom

Keystone

Ceiling Rear

Reset

Scale H & V Position

Common Reset

Store Reset On/Off On/Off

H / V On/Off H / V

Computer Input/Video Input

Setting

Appendix

Setting

Language Menu position

Input button Mode 1/Mode 2/Mode 3 Display Background Logo

Lamp control

Fan control Simple mode Remote Control RC sensor Power management

Standby mode

Pointer P-timer Count up

Security

Closed caption

Test pattern Factory default

12 languages provided

On/Countdown Off/Off Blue/User/Black Logo select

Capture Logo PIN code lock Logo PIN code change

Lamp control Auto/Normal/Eco 1/Eco 2 Lamp life control

Normal/Max On/Off

Code 1~Code 8 All/Front&Top/Top&Back/Front&Back/Front/Top/Back Off Ready Shut down 1–30 Min Eco/Network On/OffOn start Finger/Arrow/Dot

Count down Timer

Start Reset Exit

Key lock

PIN code lock PIN code change

Filter counter Timer Filter counter reset

Off Projector Remote control

Closed caption Color

Off/OnVideo delay control

HFilter counter Off/600H/900H/1200H/1500H/1800H/2000H

8 test patterns provided

Yes/No

User Default Off

Yes/No

Mode 1/Mode 2

Off/On1/On2

CC1/CC2/CC3/CC4

White/Color

Yes/No

Off/On

Appendix

Indicators and Projector Condition

Check the indicators for the projector condition.

The projector is operating normally.

Indicators

POWER

green

LAMP

red

WARNING

TEMP.

red

WARNING

FILTER

orange

P-MANAGEMENT

STAND-BY

blue

REPLACE

LAMP

orange

Projector Condition

The projector is off. (The AC power cord is unplugged.)

❖

⁄

The projector is in stand-by mode. Press the ON/ STAND-BY button to turn on the projector.

The projector is operating normally.

The projector is preparing for stand-by or the projection

❖

⁄

lamp is being cooled down. The projector cannot be turned on until cooling is completed and the POWER indicator lights green.

❖

⁄

The projection lamp is being cooled down in the Power management mode.

The projector is in the Power management mode.

❖

⁄

❊

⁄

Press the ON/STAND-BY button to turn on the projector.

• • • on

❖

• • • on (red)

❊

• • • on (blue)

• • • dim

• • • dim (red)

❖

• • • blinking at the normal rate (approx. 1 second ON, 1 second OFF)

❊

• • • blinking at the normal rate (blue and dim red) (approx. 1 second ON, 1 second OFF)

• • • off

• • • Differ according to conditions.

⁄

• • • blinking fast

(approx. 0.5 seconds ON, 0.5 seconds OFF)

❊

• • • blinking fast (blue and dim red)

(approx. 0.5 seconds ON, 0.5 seconds OFF)

• • • blinking slow (approx. 2 seconds ON, 2 seconds OFF)

The projector is detecting abnormal condition.

Indicators

POWER

green

LAMP

red

WARNING

TEMP.

red

WARNING

FILTER

orange

P-MANAGEMENT

STAND-BY

blue

REPLACE

LAMP

orange

Appendix

Projector Condition

⁄

❖

⁄

The temperature inside the projector is elevated close to the abnormally high level.

The temperature inside the projector is abnormally high. The projector cannot be turned on. When the projector is cooled down enough and the temperature returns to normal, the POWER indicator lights green and the projector can be turned on. (The WARNING TEMP. indicator keeps blinking.) Check and replace the filter.

The projector has been cooled down enough and the temperature returns to normal. When turning on the projector, the WARNING TEMP. indicator stops blinking. Check and replace the filter.

The lamp cannot light up. (The projector is preparing for standby or the projection lamp is being cooled down. The projector cannot be turned on until cooling is completed.)

The lamp cannot light up. (The lamp has been cooled down enough and the projector is in stand-by mode and ready to be turned on with the ON/STAND-BY button.)

The lamp has been used overtime. Replace the lamp immediately.

WARNING FILTER

When the filter detects clogging, reaches a time set in the timer setting, the WARNING FILTER indicator lights orange.

When this indicator lights orange, replace the filter cartridge with a new one promptly. Reset the Filter counter after replacing the filter cartridge (p.65).

LAMP REPLACE

When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights orange. When this indicator lights

orange, replace the projection lamp with a new one promptly. (p.66)

Appendix

The projector is detecting abnormal condition.

Indicators

POWER

green

LAMP

red

WARNING

TEMP.

red

WARNING

FILTER

orange

P-MANAGEMENT

STAND-BY

blue

LAMP

REPLACE

orange

Projector Condition

⁄

Fig.1 Filter warning icon

❖

⁄

If the Filter counter reached a time set in the timer setting, a Filter warning icon (Fig.1) appears on the screen and the WARNING FILTER indicator on the top panel lights up. Replace the filter cartridge as soon as possible.

PNote:

Fig.2 will not appear when the Display function is set to Off (p.52), during

“Freeze” (p.30), or No show (p.29).

The filter cartridge is not installed in the projector. Check the filter compartment to see if the filter cartridge is installed in the projector. When the filter cartridge is installed and the indicators continue to light and blink, read the column below.

The projector detects an abnormal condition and cannot be turned on. Unplug the AC power cord and plug it again to turn on the projector. If the projector is turned off again, unplug the AC power cord and contact the dealer or the service center. Do not leave the projector on. It may cause an electric shock or a fire hazard.

Appendix

Compatible Computer Specifications

Basically this projector can accept the signal from all computers with the V- and H-Frequency mentioned below and less than 140 MHz of Dot Clock.

ON-SCREEN

RESOLUTION

DISPLAy

VGA 1 640x480 31.470 59.880 VGA 2 720x400 31.470 70.090 VGA 3 640x400 31.470 70.090 VGA 4 640x480 37.860 74.380 VGA 5 640x480 37.860 72.810 VGA 6 640x480 37.500 75.000 VGA 7 640x480 43.269 85.000

MAC LC13 640x480 34.970 66.600

MAC 13 640x480 35.000 66.670

480p 640x480 31.470 59.880 575p 768x575 31.250 50.000

575i 480i

768x576

(Interlace)

640x480

(Interlace)

SVGA 1 800x600 35.156 56.250 SVGA 2 800x600 37.880 60.320 SVGA 3 800x600 46.875 75.000 SVGA 4 800x600 53.674 85.060 SVGA 5 800x600 48.080 72.190 SVGA 6 800x600 37.900 61.030 SVGA 7 800x600 34.500 55.380 SVGA 8 800x600 38.000 60.510 SVGA 9 800x600 38.600 60.310

SVGA 10 800x600 32.700 51.090

SVGA 11 800x600 38.000 60.510

MAC 16 832x624 49.720 74.550

XGA 1 1024x768 48.360 60.000 XGA 2 1024x768 68.677 84.997 XGA 3 1024x768 60.023 75.030 XGA 4 1024x768 56.476 70.070 XGA 5 1024x768 60.310 74.920 XGA 6 1024x768 48.500 60.020 XGA 7 1024x768 44.000 54.580 XGA 8 1024x768 63.480 79.350 XGA 9

1024x768 (Interlace)

XGA 10 1024x768 62.040 77.070 XGA 11 1024x768 61.000 75.700 XGA 12

1024x768 (Interlace)

XGA 13 1024x768 46.900 58.200 XGA 14 1024x768 47.000 58.300

XGA 15 1024x768 58.030 72.000 MAC 19 1024x768 60.240 75.080 SXGA 1 1152x864 64.200 70.400 SXGA 2 1280x1024 62.500 58.600 SXGA 3 1280x1024 63.900 60.000 SXGA 4 1280x1024 63.340 59.980 SXGA 5 1280x1024 63.740 60.010 SXGA 6 1280x1024 71.690 67.190 SXGA 7 1280x1024 81.130 76.107 SXGA 8 1280x1024 63.980 60.020 SXGA 9 1280x1024 79.976 75.025

SXGA 10 1280x960 60.000 60.000

SXGA 11 1152x900 61.200 65.200

SXGA 12 1152x900 71.400 75.600

H-Freq.

V-Freq.(Hz)

(kHz)

15.625 50.000

15.734 60.000

36.000 87.170

35.522 86.960

ON-SCREEN

DISPLAy

SXGA 13 SXGA 14

RESOLUTION

1280x1024 (Interlace)

H-Freq.

V-Freq.(Hz)

(kHz)

50.000 86.000

50.000 94.000

SXGA 15 1280x1024 63.370 60.010 SXGA 16 1280x1024 76.970 72.000 SXGA 17 1152x900 61.850 66.000 SXGA 18

1280x1024 (Interlace)

46.430 86.700 SXGA 19 1280x1024 63.790 60.180 SXGA 20 1280x1024 91.146 85.024 SXGA+ 1 1400x1050 63.970 60.190 SXGA+ 2 1400x1050 65.350 60.120 SXGA+ 3 1400x1050 65.120 59.900 SXGA+ 4 1400x1050 64.030 60.010 SXGA+ 5 1400x1050 62.500 58.600 SXGA+ 6 1400x1050 64.744 59.948 SXGA+ 7 1400x1050 65.317 59.978

MAC 21 1152x870 68.680 75.060

MAC 1280x960 75.000 75.080

MAC 1280x1024 80.000 75.080 WXGA 1 1366x768 48.360 60.000 WXGA 2 1360x768 47.700 60.000 WXGA 3 1376x768 48.360 60.000 WXGA 4 1360x768 56.160 72.000 WXGA 6 1280x768 47.776 59.870 WXGA 7 1280x768 60.289 74.893 WXGA 8 1280x768 68.633 84.837 WXGA 9 1280x800 49.600 60.050

WXGA 10 1280x800 41.200 50.000 WXGA 11 1280x800 49.702 59.810

WXGA 12 1280X800 63.980 60.020 WUXGA 1 1920x1200 74.556 59.885 WUXGA 2 1920x1200 74.038 59.950

WSXGA +1 1680x1050 65.290 59.954

WXGA +1 1440x900 55.935 59.887 WXGA +2 1440x900 74.918 60.000

UXGA 1 1600x1200 75.000 60.000 UXGA 2 1600x1200 81.250 65.000 UXGA 3 1600x1200 87.500 70.000 UXGA 4 1600x1200 93.750 75.000 UXGA 5 1600x1200 106.250 85.000

720p 1280x720 45.000 60.000 720p 1280x720 37.500 50.000

1035i

1080i

1080p

1080psf/30 1080psf/25 1080psf/24

Note:

⁄

True cannot be selected when is selected. (p.42)

1920x1035

(Interlace)

1920x1080

(Interlace)

1920x1080

(Interlace)

1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080

33.750 60.000

28.125 50.000

33.750 30.000

28.125 25.000

27.000 24.000

67.5000 60.000

56.250 50.000

33.750 60.000

28.125 50.000

27.000 27.000

⁄

⁄ ⁄

⁄

⁄ ⁄ ⁄

⁄ ⁄

Appendix

When an input signal is digital from the DVI terminal, refer to the chart below.

ON-SCREEN

DISPLAy

D-VGA 640x480 31.470 59.940 D-480p 720x480 31.470 59.880 D-575p 720x575 31.250 50.000

D-SVGA 800x600 37.879 60.320

D-XGA 1024x768 43.363 60.000

D-WXGA 1 1366x768 48.360 60.000 D-WXGA 2 1360x768 47.700 60.000 D-WXGA 3 1376x768 48.360 60.000 D-WXGA 4 1360x768 56.160 72.000 D-WXGA 5 1366x768 46.500 50.000 D-WXGA 6 1280x768 47.776 59.870 D-WXGA 7 1280x768 60.289 74.893

D-WXGA 9 1280x800 49.600 60.050 D-WXGA 10 1280x800 41.200 50.000 D-WXGA 11 1280x800 49.702 59.810 D-WXGA 12 1280x800 63.980 60.020

D-SXGA 1 1280x1024 63.980 60.020

D-SXGA 2 1280x1024 60.276 58.069 D-SXGA+ 1 1400x1050 63.970 60.190 D-SXGA+ 2 1400x1050 65.350 60.120 D-SXGA+ 3 1400x1050 65.120 59.900 D-SXGA+ 4 1400x1050 64.030 60.010 D-SXGA+ 5 1400x1050 62.500 58.600

RESOLUTION

H-Freq.

(kHz)

V-Freq.(Hz)

ON-SCREEN

DISPLAy

D-SXGA+ 6 1400x1050 64.744 59.948 D-SXGA+ 7 1400x1050 65.317 59.978

D-UXGA 1600x1200 75.000 60.000

D-WUXGA 2 1920 x 1200 74.038 59.950

D-WSXGA+ 1 1680 x 1050 65.290 59.954

D-WXGA+ 1 1440x900 55.935 59.887

D-720p 1280x720 45.000 60.000 D-720p 1280x720 37.500 50.000

D-1035i

D-1080i

D-1080psf/30 1920x1080 33.750 60.000 D-1080psf/25 1920x1080 28.125 50.000 D-1080psf/24 1920x1080 27.000 48.000

D-1080p

RESOLUTION

1920x1035

(Interlace)

1920x1080

(Interlace)

1920x1080

(Interlace)

1920x1080 33.750 74.250 1920x1080 28.125 74.250 1920x1080 27.000 74.250 1920x1080 67.500 148.500 1920x1080 56.250 148.500

H-Freq.

(kHz)

33.750 60.000

28.125 50.000

V-Freq.(Hz)

PNote:

• Depending on the condition of signals and the type and length of cables, these signals may not be properly viewed.

• Specifications are subject to change without notice.

The CE Mark is a Directive conformity mark of the European Community (EC).

This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety standards against risk of fire, casualty, and electrical hazards.

Pixelworks ICs used.

Appendix

Technical Specifications

Mechanical Information

Projector Type Multi-media Projector Dimensions (W x H x D) PLC-XM80L :19.25” x 6.46” x 14.61” (489.5 mm x 164.0 mm x 371.1 mm) PLC-XM80 : 19.25” x 6.46” x 17.12” (489.5 mm x 164.0 mm x 434.8 mm) Net Weight PLC-XM80L : 18.7 lbs (8.5kg) PLC-XM80 : 20.5 lbs (9.3 kg)

Feet Adjustment 0˚ to 4˚

Panel Resolution

LCD Panel System 0.8” TFT Active Matrix type, 3 panels Panel Resolution 1,024 x 768 dots Number of Pixels 2,359,296 (1,024 x 768 x 3 panels)

Signal Compatibility

Color System SD/HD TV Signal 480i, 480p, 575i, 575p, 720p, 1035i, 1080i and 1080p Scanning Frequency H-sync. 15 kHz–100 kHz, V-sync. 48 Hz–100 Hz

Optical Information

Projection Image Size (Diagonal) Adjustable from 40” to 400” (PLC-XM80) Throw Distance 4.3' (1.3m) - 75.4' (22.9m) (PLC-XM80) Projection Lens F1.7–2.3 lens with f=26.9 mm–45.4 mm with motor zoom and focus (PLC-XM80) Projection Lamp 275 W lamp

Interface

Input 1 Digital (DVI-D) x 1, Analog (Mini D-sub 15 pin) x 1 Input 2 BNC Type x 5 (G or Video/Y, B or Pb-Cb, R or Pr-Cr, H/HV and V) Input 3 RCA Type x 3 (Video/Y, Pb/Cb,Pr/Cr), Mini DIN 4 pin x 1 (S-video)

Analog Out Audio Out Audio In 1/2

Audio In 3 R/C Jack Mini jack (Wired Remote) x 1 Control Port D-sub 9 pin x 1 USB Connector USB Series B x 1 LAN Connection Terminal RJ45

Audio

Internal Audio Amp 7.0 W RMS Built-in Speaker 1 speaker, ø1.46" (37mm)

Power

Voltage and Power Consumption AC 100–120 V (4.4A Max. Ampere), 50/60 Hz (The U.S.A and Canada) AC 100–240 V (4.4-1.8A Max. Ampere), 50/60 Hz for other countries

Operating Environment

Operating Temperature 41˚F–104˚F (5˚C–40˚C) Storage Temperature 14˚F–140˚F (-10˚C–60˚C)

Remote Control

Battery AAA or LR03 Type x 2 Operating Range 16.4’ (5 m/±30˚) Dimensions 1.8” (W) x 1.0” (H) x 5.7” (D) (45 mm x 25 mm x 145 mm) Net Weight 3.5 oz (99 g) (including batteries)

Accessories

Owner’s Manual (CD-ROM) Lens Cap (for PLC-XM80) Quick Reference Guide Lens Mount Cover (for PLC-XM80L) AC Power Cord Lens Antitheft screw * Remote Control and Batteries VGA Cable USB Cable PIN Code Label

Analog RGB (Mini D-sub 15 pin) Terminal x 1

Audio (Mini Type stereo) x 1

RCA Type x 2

PAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N

* Contact the dealer where you purchased the projector or the service center about the Lens Antitheft Screw.

ü The specifications are subject to change without notice. ü LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are effective, a tiny fraction of the

pixels (0.01% or less) may be ineffective by the characteristics of the LCD panels.

Appendix

Optional Parts

The parts listed below are optionally available. When ordering those parts, specify the item name and Model No. to the sales dealer.

Model No. Standard Zoom Lens : LNS-S20

Long Zoom Lens : LNS-T20 Ultra Long Zoom Lens : LNS-T21 Short Zoom Lens : LNS-W20 Short Fixed Lens : LNS-W21 SCART-VGA Cable : POA-CA-SCART

Lens Replacement

The lens of this projector can be replaced with other optional lens. This feature enables you to use the projector for wide variety of uses. For installation and replacement of the lens, always contact the sales dealer. The projector lens must be installed or replaced by well-trained sales or service engineers. Do not attempt to install and replace the lens by yourself as it may cause injury.

Do not hold the lens when carrying or lifting the projector. It may cause serious damage to the projector.

To the sales and service engineers:

For the lens replacement and lens installation, refer to the installation manual of the optional lens. Before replacing and installing the lens, make sure that you are using the lens with the correct Type No.

Pj Link Notice

This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information System Industries Association). The projector supports all commands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1.

Projector Input PJLink Input Parameter

Input 1 RGB (PC analog) RGB 1 11

RGB (Scart) RGB 2 12 RGB (PC digital) DIGITAL 1 31 RGB (AV HDCP) DIGITAL 2 32

Input 2 Video VIDEO 1 21

Y, Pb/Cb,Pr/Cr VIDEO 2 22 RGB RGB 3 13

Input 3 Video VIDEO 3 23

Y, Pb/Cb,Pr/Cr VIDEO 4 24 S-video VIDEO 5 25

PJLink is a registered trademark of JBMIA and pending trademark in some countries.

Configurations of Terminals

ANALOG/ MONITOR OUT (Mini D-sub 15 pin)

Input

9 678

Red Input

Green Input

Blue Input

No Connect

Ground (Horiz.sync.)

Ground (Red)

Ground (Green)

Ground (Blue)

Output

Red Output

Green Output

Blue Output

No Connect

Ground (Horiz.sync.)

Ground (Red)

Ground (Green)

Ground (Blue)

+5V Power

Ground (Vert.sync.)

Ground

DDC Data

Horiz. sync. Input (Composite H/V sync.)

Vert. sync. Input

14 15

DDC Clock

No Connect

Ground (Vert.sync.)

No Connect

Horiz. sync. Output

Vert. sync. Output

No Connect

Appendix

DIGITAL DVI-D (DVI 24 PIN)

T.M.D.S. Data2–

T.M.D.S. Data2+

T.M.D.S. Data2 Shield

No Connect

DDC Clock

DDC Data

No Connect

USB CONNECTOR (Series B)

Vcc

2 3 4

- Data

+ Data

Ground

CONTROL PORT CONNECTOR (D-sub 9 pin)

Serial

-----

1 2

R X D

T X D

-----

RTS

7 8

CTS

-----

T.M.D.S. Data1–

T.M.D.S. Data1+

T.M.D.S. Data1 Shield

No Connect

+5V Power

Ground (for +5V)

Hot Plug Detect

LAN TERMINAL

87654321

T.M.D.S. Data0–

T.M.D.S. Data0+

T.M.D.S. Data0 Shield

No Connect

T.M.D.S. Clock Shield

T.M.D.S. Clock+

T.M.D.S. Clock–

TX + TX –

2 3

RX +

5 6 7 8

-----

RX –

-----

----------

Appendix

PIN Code Number Memo

Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service center.

PIN Code Lock No.

Factory default set No: 1 2 3 4*

Logo PIN Code Lock No.

Factory default set No: 4 3 2 1*

* Should the four-digit number be

changed, the factory set number will be invalid.

While the projector is locked with the PIN code... Put the label below (supplied) on in a prominent place of

the projector’s body while it is locked with a PIN code.

16.39(416.2)

4°

3.31(84.0)

7.25(184.2)

4.34(110.3)

19.27(489.5)

Dimensions

3.80(96.6)

7.70(195.5)

Appendix

Unit: inch (mm)

Screw Holes for Ceiling Mount Screw: M6 Depth: 0.393 (10.0)

6.89(175.0)

5.91(150.0)

6.46(164.0)

3.34(84.7)

6.67(169.5)

13.58(344.9)

14.61(371.1)

17.12(434.8)

1.18(30.0)

6.30(160.0)

2.95(75.0)

5.91(150.0)

9.20(233.6)

6.25(158.8)

3.78(96.0)

Appendix

Serial Control Interface

This projector provides a function to control and monitor the projector's operations by using the RS-232C serial port.

Operation

Connect a RS-232C serial cross cable to CONTROL PORT

on the projector and serial port on the PC. (See p.19)

Launch a communication software provided with PC and

setup the communication condition as follows:

Baud rate : 9600 / 19200 bps Parity check : none Stop bit : 1 Flow control : none Data bit : 8

PNote:

The default of the baud rate is set to 19200 bps. If an

error occurs in the communication, change the serial port and the communication speed (baud rate).

Type the command for controlling the projector and then enter

the "Enter" key.

Example

When you want to change the input to INPUT 2, Type 'C' '0' '6' 'Enter'.

PNote:

Enter with ASCII 64-byte capital characters and one-byte

characters.

Functional Execution Command

Format

The command is sent from PC to the projector with the format below; 'C' [Command] 'CR' Command: two characters (refer to the command

table below.

-The projector decodes the command and returns the 'ACK' with the format below; 'ACK' 'CR'

-When the projector can not decode the command, it returns with format below. ‘?’ ‘CR’

Appendix

Command Function

C00 Turn the projector ON C01 C02 Turn the projector OFF

C05 Select Input 1 C06 Select Input 2 C07 Select Input 3 C09 Volume +

C0A Volume C0B Sound mute ON C0C Sound mute OFF C0D Video mute ON C0E Video mute OFF

C0F Aspect 4:3

C10 Aspect 16:9 C1C Menu ON C1D Menu OFF

C20 Brightness UP

C21 Brightness DOWN

C23 Select Input 2 Video

C24 Select Input 2 Y, Pb/Cb,Pr/Cr

C25 Select Input 2 RGB

C28 ON Start ON

C29 ON Start OFF

C33 Select Input 3 Video

C34 Select Input 3 S-video

C35 Select Input 3 Y, Pb/Cb,Pr/Cr

Turn the projector OFF (immediately OFF)

Command Function

C3A Pointer RIGHT C3B Pointer LEFT C3C Pointer UP C3D Pointer DOWN C3F Enter

C46 Zoom DOWN

C47 Zoom UP C4A Focus DOWN C4B Focus UP

C50 Select Input 1 Analog RGB

C51 Select Input 1 SCART

C52 Select Input 1 DVI (PC Digital)

C53 Select Input 1 DVI (AV HDCP) C5D Lens shift UP C5E Lens shift DOWN C5F Lens shift LEFT

C60 Lens shift RIGHT

C89 Auto PC adj. C8E Keystone UP C8F Keystone DOWN

Appendix

Status Read Command

Format

The command is sent from PC to the projector with the format below; 'CR' [Command] 'CR' Command: one character (refer to the command table

The projector decodes the command and returns the 'Character string' with the format below;

below.

Command Function

CR0 Status Read

CR6 Temperature Read S1 S2 S3

Projector

Return

00 80 40 20 10 28 24 04

21 81

Projector status

Power On Stand-by mode Countdown Cooling down Power Malfunction Cooling down at the temperature anomaly Cooling down at Power Management mode Power Management mode after Cooling down Cooling down after the projector is turned off when the lamps

are out. Stand-by mode after Cooling down when the lamps are out.

Stand-by mode after Cooling down at the temperature anomaly.

S1 = Temperature at Sensor 1 (˚C)

S2 = Temperature at Sensor 2 (˚C)

S3 = Temperature at Sensor 3 (˚C)

(ex.) S1 = 12.3˚C S2 = 23.4˚C S3 = 34.5˚C S2 = 23.4˚C S3 = 34.5˚CS2 = 23.4˚C S3 = 34.5˚C

--> The projector displays “12.3 23.4 34.5” ( For each sensor, two digit and the tenth place numbers are

displayed with a space between each temperature.)

The tables on page 87 and 88 show the typical command lists for controlling the projector. Please consult your local dealer for further information of other commands.

Communication failure

KW8AL

Sanyo PLC-XM80 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual