Sanyo PLC-XM150 User Manual

Specifications

Product Number System

LCD Panel

Projection Lens Light Source Screen Size (Projection Distance) Color Reproducibility(When projecting video signal) Contrast Ratio (Full On / Full Off)*1 Brightness *1 Uniformity Audio Output and Speaker Scanning Frequency Resolution (resizing) (when using RGB signal)

Terminals

Graphical Output Audio Input/ Output Controller Input / Output, and Other Operating Temperature

Power Consumption

Power Source Dimensions（WxHxD） Weight Main Accessories

*1 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. *2 For analog signals only. Some restrictions apply to output signals. Not all types of input signals are supported. *3 The USB interface may not be compatible with every USB device. * All product names and company names are trademarks or registered trademarks of their respective companies. * Product appearance and specifications are subject to change without notice. Replacement Lamp Type No.; 610 346 9607 (PLC-XM150/XM150L) 610 347 5158 (PLC-XM100/XM100L)

Size Pixel Count

PC Input Video Input

100-120 V 200-240 V

• Control port (x1); D-sub 9 • USB terminal; type B x1 *3 • Wired remote control connection terminal; Mini jack x1 • Wired LAN; RJ-45 (100Base-TX / 10Base-T)

PLC–XM150 PLC–XM150L PLC–XM100 PLC–XM100L

Power-driven zoom (1 - 1.7x), f=26.9 - 45.4, F = 1.7 - 2.3*XM150L/XM100L:Optional lens

330 W

40" - 400" 4.1-75.1' 100" 11.2-18.7' (Projection distance varies depending on the lens)

6,000 lumens

Horizontal: 15 - 100 kHz, Vertical: 48 - 100 Hz, Dot Clock: 140 MHz or less

• Digital input (x1); DVI-D (HDCP compatible) •Analog RGB input (x2), D-sub 15, BNC 5-type

• Video input (x3); BNC 3-type (VIDEO / Y-Pb / Cb-Pr / Cr), RCA 3-type (VIDEO / Y-Pb / Cb -Pr / Cr), S-video

• Audio input; Stereo mini jack x2, RCA (L, R) x 1 • Audio output; Stereo mini jack x1

490 WStandby: 0.4 W / 22 W (Eco / Network) 460 WStandby: 0.6 W / 24 W (Eco / Network)

19.3 x 6.5 x 17.1 inch - PLC-XM150 / XM100 19.3 x 6.5 x 14.6 inch - PLC-XM150L / XM100L

Removable power cord x1, USB cable x1, D-sub 15 cable x1, PIN code-label, Quick reference guide, Owner's manual(CD-ROM), Remote control x1 (AAA battery x2)

21.3 lbs 19.6 lbs 21.3 lbs 19.6 lbs

RGB liquid crystal shutter projection system

0.8 inch x 3, Aspect Ratio 4:3

786,432 (1024 x 768) x3, Total pixels 2,359,296

Full color (1.07 billion colors)

1000:1

90 %

7W (monaural) x1

1024 x 768 dots (WUXGA dot resizing possible)

• Analog RGB (x1); D-sub 15 *2

41 - 104°F

AC 100 - 120 V, AC 200 - 240 V, 50 / 60 Hz

423 WStandby: 0.4 W / 22 W (Eco / Network) 400 WStandby: 0.6 W / 24 W (Eco / Network)

275 W

5,000 lumens

XGA Multimedia Portable Projector

PLC-XM150/XM150L PLC-XM100/XM100L

Higher Brightness Images, Reliable Operation,

Flexible, For Professional Use

Optional Lenses

Part Number

Type

Image

Motor Driven

Zoom/Focus

Focal length (inch)

F value

lens aperture (inch)

lens weight (lbs)

H1:H2

Part

Number

W1:W2

Throw Ratio

Throw distance

inch

40 60

80 100 120 150

200

250

300

350

400

* Apporoximate projection distances are calculated based on lens specifications. Individual lenses diverge from this fiqure by

to 5% due to slight variations in lens size shape

LNS-W21 LNS-W20

Short Fixed Lens Short Zoom Lens

Fixed/Power

0.51

2.0

4.00

2.38 1:1 (Fixed) 1:1 (Fixed)

0.8:1

Fixed

1.97

3.06

4.14

5.22

6.30

7.93

10.63

13.34

16.05

18.75

21.46

Yes Yes Yes

x1.3/Power

0.80-1.09

1.8-2.3

4.53

2.64 10:0-1:1 (approx.) 3:2-2:3 (approx.)

1.25-1.70:1

Wide Tele

4.3

3.2

6.6

4.9

8.9

6.6

11. 2

8.2

13.5

10.2

17. 1

12.5

22.6

16.7

28.5

21.0

34.1

25.3

40.0

29.5

45.6

33.5

LNS-S20

(PLC-XM150/ XM100)

Standard Zoom Lens

x1.7/Power

1.06-1.79

1.7-2.3

3.68

1.87

10:0-1:1 (approx.)

3:2-2:3 (approx.)

1.70-2.89:1

ft ft

Wide Tele Wide Tele

7. 2

4.3

11. 2

6.6

14.8

8.9

18.7

11. 2

22.3

13.1

27.9

16.7

37.4

22.0

46.9

27.6

56.4

33.1

65.9

38.7

75.1

44.3

LNS-T20

Long Zoom Lens Long Zoom Lens

x1.6/Power

1.80-2.91

1.8-2.3

3.68

2.60

10:0-1:1 (approx.)

3:2-2:3 (approx.)

2.89-4.60:1

7. 2

11. 8

11. 2

18.0

14.8

24.3

18.7

30.2

22.3

36.4

28.2

45.9

37.4

61.4

46.9

76.8

56.4

92.2

65.9

107.6

75.5

123.0

LNS-T21

Yes

x1.6/Power

2.91-4.61

1.8-2.3

3.68

2.64

10:0-1:1 (approx.)

3:2-2:3 (approx.)

4.60-7.36:1 ft

Wide Tele

18.7

11. 8

28.5

18.0

38.4

24.0

48.2

30.2

58.1

36.4

72.8

45.6

97.4

61.4

122.0

76.8

146.7

92.2

170.9

107.6

195.5

123.0

Terminals

External dimensions (unit: inch)

1.0

5.2

4.3

5.2

19.7

0.6

5.9

6.5

3.5

1.7

3.8

6.3

4.3

6.7

0.1

13.6

14.6

1 7. 1

1.6

9.8

6.3

4∞

3.3

19.3

1.2

7. 7

DIAMETER DEPTH MAX 0.39 inches

6.9

7. 3

3.3

16.4

3.8

5.9

9.2

3.0

SANYO Presentation Technologies

Toll free:

888-337-1215 www.sanyoprojectors.com

PLC-XM150/ X M150L PLC-XM100/ X M100L

Brightness of 6,000 lumens

Brightness of 5,000 lumens

High Brightness and Durable Inorganic Optical Engine System (D.I.O.S.)

Features a highly reliable new optical engine with inorganic panels, this projector has a brightness of 6000 lumens (XM150/XM150L) and a high contrast of 1000:1*, putting it at the top of its class in performance. Naturally suited to use in venues such as large meeting rooms, conference rooms and lecture halls, the projector is also ideal for projecting digital signage in bright places.

*When in 'Auto' lamp mode

Lens Center Layout (Symmetry)

A symmetrical design with the lens in the center of the projector has been adopted to suit ceiling installation in particular. This allows the projector and the screen to be centered together, which not only makes design and installation much easier, but also offers a sense of greater stability through symmetry of the positioning between projector and screen.

Easier Replacement

Lamp replacement has been simplified to make maintenance easier. Easy removal and replacement of the lamp from the top. Of course the lamp can also be replaced easily even if the projector is ceiling mounted.

Active Maintenance Filter (AMF) System

Maintenance for the filter, which prevents dust from entering the projector, is an extremely important task for sustaining projector performance. Built-in airflow sensors and atmospheric pressure sensors detect changes in the intake airflow volume and filter clogging. If the airflow drops level, the filter is automatically wound in to produce a below a predetermined clean filter surface, so there is no need to manually clean the filter. The replacement cycle for the filter cartridge is approximately 10,000 hours.* This raises reliability while lowering

maintenance costs.

* Lamp Control: This value is calculated by an original SANYO test based on JIS D0207 test methods with Normal mode selected.

A Wide Range of Optional Lenses

5 different optional lenses for various uses. PLC-XM150 and XM100 include a standard lens (LNS-S20).

Projection distance of standard lens (to 100 inch screen)

LNS-W21* 5.2’

LNS-W20 8.2’ - 11.2’

LNS-S20 11.0’ - 18.7’

LNS-T20 18.7’ - 30.2’

LNS-T21 30.2’ - 48.2’

3.3’ 16.4’ 32.8’ 49.2’

* It might be different depending on setting situation

The Mechanical Shutter system is popular for a variety of professional uses. It allows this star-studded selection of SANYO Portable projectors to meet a host of demanding business needs, including meetings, entertainment and promotional applications.

Anti-Theft Hook

The anti-theft hook lets you attach a security device to the projector for strong protection against theft.

Tilted Installation Possible (360° Tilt Angle)

The projector can be installed at a 360° tilt angle in the vertical direction. This makes it possible to project images facing directly above or below the projector.

Vertical Installation

The PLC-XM150 / X M150L PLC-XM100/ X M100L can also be installed to project images upward or downward.

Auto Input Signal SearchMechanical Shutter System

When using a conventional projector, you have to physically select the input signal. Auto Input Signal Search automatically determines the input signal when the projector is installed and the power is turned on, and sets the input for you.

Built-in LAN Network Control Function

A centralized management and control system can be easily configured.

* This function comes as standard equipment.

Powered Vertical/Horizontal Lens Shift

Featuring both vertical and horizontal lens shift (vertical: +/- 50 %, horizontal: +/- 10 % (maximum)), the PLC-XMseries enables intuitive operation for easy on-site setup.

10%

50%

10%

Powered Zoom and Focus

Zoom and focus can be carried out electronically, so that adjustments can be made easily (smoothly). Of course operations can also be carried out using the remote control, so that adjustments can be carried out easily from a distance even after the projector has been installed in a high location.

Corner Keystone

The Corner Keystone function corrects trapezoidal distortion. To square the image, simply designate the four corners with the remote control or projector buttons. The corrected data is stored in memory, so rectangular screens can be displayed with permanently installed projectors at lecture hall and conference room.

[Before correction]

When projecting from an angle

Adjusting the

four corners

[After correction]

Achieving four

straight corners

Interchangeable Lenses (Optional)

To enable projection in various locations, the lens lineup extends from short to long focus lenses. No additional tools are necessary for changing lenses. Simply press the button and screw in the interchangeable lens.

Featuring the PJ-Net Organizer Box (option: POA-PN03C)

The PJ-Net Organizer (POA-PN03C) is provided as standard equipment, for centralized control of projectors over a wired network. Installing the optional PJ Master into a PC or server also lets you control the PJ-Net Organizer-mounted projectors over a network.

PC 5

PJ 1 PJ 2

PJ 1

Capture a screen image of PC5 and make marking with a tool.

PJ 2

PC 6

Real Time Capture function

To display the screen image of the computer by the projector through the network in real time.

Network Viewer function

To acquire the JPEG image data from the file servers placed in the network and project them by the projector.

Network Communication function

To communicate by sharing the captured image.User can draw the text and figure on the captured image by using a drawing tool.

PC 1 PC 1

PC 3 PC 4 PC 6

PC 1

PC 3 PC 4 PC 6

PC 1 PC 2 PC 5

PC 2

PLC-XM150/ XM150L

Brightness of 6,000 lumens

PLC-XM100/ X M100L

Brightness of 5,000 lumens