“SANYO” is a registered trademark of SANYO Electric Co., Ltd. and is used under
license. KYOCERA is a registered trademark of Kyocera Corpo ration. Kyocera
manufactures and markets the SANYO wireless line of products. All other
trademarks are the property of their respective owners.
Table of Contents
Looking for something? If you don’t see it in the headings
This User Guide introduces you to wireless service and all the
features of your new phone. It’s divided into four sections:
⽧ Section 1: Getting Started
⽧ Section 2: Your Phone
⽧ Section 3: Wireless Service
⽧ Section 4: Safety and Warranty Information
WARNING
Note
Please refer to the Important Safety Information
section on page 104 to learn about information that
will help you safely use your phone. Failure to read
and follow the Important Safety Information in this
phone guide may result in serious bodily injury,
death, or property damage.
Some features may depend on services from your carrier or
require an additional purchase.
The following table outlines your phone’s main menu structure.
For more information about using your phone’s menus, see
“Navigating Through the Menus” on page 12.
Missed Alerts
History
Bluetooth
1: On/Off
2: Visibility
3: Add New
4: Trusted Devices
5: My Bluetooth Info
Web
Messages
1: Voicemail
1: Call Voicemail2: Details
3: Reset Indicator
i
2: Send Message
1: Text Message 2: Picture Messaging
3: Text Messages
4: Picture Messaging
5: Settings
1: Notification2: Callback Number
3: Signature 4: Preset Messages
Contacts
Photos
1: Camera
Press the right softkey to view the following options:
1: Picture Mode2: Zoom
3: Self-Timer4: Fun Tools
5: Image Controls6: CameraSettings
7: Review Media8: Key Guidance
9: User Settings
2: Picture Messaging
3: My Albums
1: In Phone2: Online Albums
ii
4: Settings & Info
1: Location 2: Status Bar
3: Slideshow Interval 4: Account Info
5: Help
My Stuff
1: Games
2: Ringers
3: Screen Savers
4: Applications
5: (Dynamic – if applicable)
6: (Others – if applicable)
Shopping
Calendar
Tools
1: Alarm
2: Activate/Self-Service*
* availability dependent on your service provider
3: Update Phone*
* availability dependent on your service provider
4: Voice Services
1: Voice Recognition2: Voice Memo
5: Assigned Media
6: Calculator
7: Countdown
8: Stopwatch
9: World Clock
Settings
1: Display
1: Screensaver
2: Brightness
3: Backlight
4: Picture ID
5: Power Save Mode
6: Clock/Calendar
7: Greeting
2: Volume
1: Incoming Ringer2: Playback Volume
3: Power Up/Down4: Key Beeps
3: Ringers
1: Incoming Calls2: Voicemail
3: Messages4: Calendar
5: Power Up/Down
4: Keyguard
5: Text Entry
1: Input Language2: My Words
3: Word Prediction4: Word Completion
5: Word Scan6: Word Choice List
7: Auto-Complete8: Help
6: Phone Info
1: Phone#/User ID2: Memory Status
3: Icon Glossary4: Version
5: Advanced
1: Voice Services2: TTY
3: Font Size4: Vibrate Type
5: Hearing Aid
2: Airplane Mode
3: Alerts
1: Beep Each Minute 2: Out of Service
3: Connect
4: Call Setup
1: Abbrev. Dial2: Call Answer
3: Auto-Answer
5: Web
1: Web On/Web Off2: Net Guard
3: Update Data Profile**availability dependent on your service provider
6: Headset Mode
1: Normal2: Headset Only
7: Language
1: English2: Español
8: Location
9: Roaming
1: Set Mode2: Call Guard
3: Data Roam Guard
0: Navigation Keys
1: Left Navigation2: Right Navigation
(Calendar) (Web)
3: Up Navigation4: Down Navigation
(Text Message) (My Stuff)
In Use Menu
Press OPTIONS (right softkey) to display the following
options:
1: Save/Contact Details 2: Main Menu
3: 3-Way Call4: Contacts
5: Voice Memo6: Phone Info
Section 1
Getting Started
1A. Setting Up Service
⽧ Setting Up Your Phone (page 2)
⽧ Activating Your Phone (page 3)
⽧ Setting Up Your Voicemail (page 3)
⽧ Getting Help (page 4)
Setting Up Your Phone
1. Install the battery.
䡲 Insert the battery into the opening on the back of the
phone, making sure the connectors align (), and gently
press it down ().
䡲 Position the battery cover and slide it upward until it snaps
into place ().
21A. Setting Up Service
2. Press to turn the phone on.
䡲 If your phone is activated, it will turn on, search for service,
and enter standby mode.
䡲 If your phone is not yet activated, see “Activating Your
Phone” on page 3 for more information.
3. Make your first call.
䡲 Use your keypad to enter a phone number.
䡲 Press .
Your phone’s battery should have enough charge for your
Note
phone to turn on and find a signal, set up your voicemail,
and make a call. You should fully charge your battery as
soon as possible. See “Charging the Battery” on page 12
for details.
Activating Your Phone
Setting Up Your Voicemail
䢇 If you purchased your phone at a store, it is probably activated
and ready to use.
䢇 If you received your phone in the mail, your phone is designed
to activate automatically when you first turn it on. To confirm
your activation, make a phone call.
䢇 If you received your phone in the mail and you are switching
numbers from a previous phone to the new phone, you need
to contact your service provider to activate the number on your
new phone. When you have finished, make a phone call to
confirm your activation.
Do not press END while the phone is being activated.
Tip
Note
END cancels the activation process.
Pressing
If you are having difficulty with activation, contact your
wireless service provider.
Your phone automatically transfers all unanswered calls to your
voicemail, even if your phone is in use or turned off. You should
set up your voicemail and personal greeting as soon as your
phone is activated.
1. From standby mode, press and hold .
2. Follow the system prompts to:
䡲 Create your passcode.
䡲 Record your name announcement.
䡲 Record your greeting.
Voicemail Passcode
Note
It is strongly recommended that you create a passcode
when setting up your voicemail to protect against
unauthorized access. Without a passcode, anyone who has
access to your handset is able to access your voicemail
messages.
For more information about using your voicemail, see “Voicemail”
on page 84.
1A. Setting Up Service3
Setting Up Service
Getting Help
Directory Assistance
Call Directory Assistance from your phone and you’ll have access
to a variety of services and information including residential,
business, and government listings. There is a per-call charge to
use Directory Assistance, and you will be billed for airtime.
䊳 Press .
Operator Services
Operator Services provide assistance when placing collect calls or
when placing calls billed to a local telephone calling card or third
party.
䊳 Press .
For more information, please contact your wireless service
provider.
41A. Setting Up Service
Section 2
Your Pho ne
2A. Phone Basics
MENU
OK
4
5
8
0
3
6
9
GHI
J
TUV
ABC
MNO
Z
DEF
PQRS
Q
1. Earpiece
2. Main Screen
14. LED Indicator
13. Softkeys
15. Outer Screen
12. Headset Jack
3. MENU/OK Key
11. Navigation Key
4. Camera Key
10. BACK Key
5. TALK Key
9. SPEAKER Key
8. END/POWER Key
7. Keypad
6. Microphone
19. Micro-USB Connector
16. Speaker
20. Volume Button
17. Camera Lens
21. Side Camera Button
18. Battery
Release Slot
22. Internal Antenna
⽧ Your Phone (page 6)
⽧ Viewing the Display Screen (page 8)
⽧ Turning Your Phone On and Off (page 10)
⽧ Battery and Charger (page 11)
⽧ Navigating Through the Menus (page 12)
⽧ Displaying Your Phone Number (page 13)
⽧ Setting the Keyguard (page 13)
⽧ Making and Answering Calls (page 14)
⽧ Entering Text (page 21)
⽧ Simple Data Exchange (page 25)
Your Phone
KL
WXY
62A. Phone Basics
Key Functions
1. Earpiece lets you hear the caller and automated prompts.
2. Main Screen displays all the information needed to operate
your phone, such as the call status, the Contacts list, the
date and time, and the signal and battery strength.
3. MENU/OK Key lets you access the phone’s menus and select
the highlighted choice when navigating through a menu.
4. Camera Key lets you access the Photos menu. Press and
hold to activate the camera mode and take pictures.
5. TALK K ey allows you to place or receive calls, answer Call
Waiting, use 3-Way Calling, or activate Automatic Speech
Recognition (ASR).
6. Microphone allows other callers to hear you clearly when
you are speaking to them.
7. Keypad lets you enter numbers, letters and characters and
navigate within menus. You can use the numeric keypad for
speed dialing. (See “Speed Dialing” on page 20.)
8. END/POWER Key lets you turn the phone on or off, end a
call, or cancel your input and return to idle mode (standby
mode or service search mode).
9. SPEAKER Key lets you place or receive voice calls and
activate ASR in speakerphone mode, or turn the
speakerphone mode on or off during a call.
10. BACK Key deletes characters from the display in text input
mode. When in a menu, pressing it returns you to the
previous menu. This key also allows you to return to the
previous screen in a Web session.
11. Navigation Key scrolls through the phone’s menu options
and acts as a shortcut key from standby mode. These keys
can be reassigned to create customized shortcuts. (See
“Navigation Key Shortcuts” on page 37.)
12. Headset Jack allows you to plug in an optional headset for
convenient, hands-free conversations.
an accessory into the incorrect jack may damage the phone.
CAUTION! Inserting
13. Softkeys let you select softkey actions or menu items
corresponding to the bottom left and right lines on the main
screen.
14. LED Indicator shows the status of your phone and charging
at a glance.
15. Outer Screen lets you monitor the phone’s status and see
who is calling without opening the phone.
2A. Phone Basics7
Phone Basics
16.
Speaker lets you hear the different ringers and sounds. You
can mute the ringer when receiving incoming calls by
pressing or the side camera button.
17. Camera Lens, as part of the built-in camera, lets you take
pictures.
18. Battery Release Slot lets you open the battery cover to
replace the battery.
19. Micro-USB Connector allows you to connect a compatible
charging cable or USB data cable (not included).
CAUTION!
Inserting an accessory into the incorrect jack may damage
the phone.
20. Volume Button allows you to adjust the ringer volume
whenever your phone is turned on or adjust the voice volume
during a call.
21. Side Camera Button lets you open the Photos menu when
the phone is open. This button also allows you to mute the
ringer when receiving incoming calls.
22. Internal Antenna facilitates reception and transmission. To
maximize performance, do not obstruct the internal antenna
while communicating. (See page 14.)
82A. Phone Basics
Viewing the Display Screen
The status bar at the top of your phone’s display screen provides
information about your phone’s status and options. These tables
identify the major symbols you’ll see on the status bar or other
positions of your phone’s display screen.
To view a list of your phone’s icons and descriptions, press
Tip
MENU/OK > Settings > Phone Info > Icon Glossary.
Service Icons
Signal Strength – Your phone’s current signal strength.
(More bars = stronger signal.)
No Service – Your phone cannot find a usable signal.
Roaming – Your phone is “roaming” off the home network.
Web Service – 1xRTT Web service is available. When active, the
icon is animated.
Web Service Dormant – Web service is currently dormant.
Web Service Unavailable – Web service is currently unavailable.
Status Icons
Battery – Your phone’s current battery charge level. (The icon to the
left shows the battery is fully charged.) The icon is animated while the
battery is charging.
Location On – Your phone’s location feature is on and available for
location-based services such as GPS Navigation.
Location Off – Your phone’s location feature is off. Your location is
available only for 911.
Silence All – Your phone’s sound is turned off.
Vibrate All – Your phone’s sound is turned off but vibrate is turned
on.
Ringer Off – Your phone’s ringer is turned off.
1 Beep – A beep sounds when you receive an incoming call, a
message, etc.
1 Beep and Vibrate – 1 Beep and vibrate are set.
Ringer and Vibrate – The volume level is set to between 1 and 8
and vibrate is turned on.
Speaker Mode – Your phone is in speaker mode.
Messaging Icons
Multiple Messages – You have two or more different types of new
messages waiting.
Picture Messages – You have one or more new picture messages
waiting.
Text Messages – You have one or more new text messages wai ting.
Voicemail – You have one or more new voicemail messages waiting.
Urgent Messages – You have one or more new urgent messages
waiting.
Bluetooth Icons
Visible – Your phone is discoverable by (visible to) other Bluetooth
devices.
Connected – Your phone is connected to a Bluetooth device.
Enable – Your phone’s Bluetooth feature is enabled.
* The above icons will blink while your phone is communicating with a
Bluetooth device.
2A. Phone Basics9
Phone Basics
Voice Call Icons
Missed Call – You have one or more missed voice calls.
Bluetooth Device – A call is in progress using a Bluetooth device.
Headset – A call is in progress using an optional wired headset .
Car Kit – A call is in progress using an optional car kit device.
TTY – Your phone is connected to a TTY device.
Alarm – An alarm or countdown is set.
Notification – You have events, alarms, or countdown notifications.
HAC Enabled – Your phone’s HAC setting is enabled.
102A. Phone Basics
Others
Turning Your Phone On and Off
Turning Your Phone On
䊳 Press and hold .
Once your phone is on and finds a signal, it automatically enters
standby mode – the phone’s idle state. At this point, you are
ready to begin making and receiving calls.
If your phone is unable to find a signal after 15 minutes of
searching, a Power Save feature is automatically activated. When
a signal is found, your phone automatically returns to standby
mode.
In Power Save mode, your phone searches for a signal
periodically without your intervention. You can also initiate a
search for service by pressing any key except numbered keys.
The Power Save feature conserves your battery power
Tip
when you are in an area where there is no signal.
Turning Your Phone Off
䊳 Press and hold for two seconds until you see the
powering-down animation on the display screen.
Your screen remains blank while your phone is off unless the
battery is charging.
Battery and Charger
WARNING
Battery Capacity
Your phone is equipped with a Lithium Ion (Li-Ion) battery. It
allows you to recharge your battery before it is fully drained. The
battery provides up to 5.8 hours of continuous digital talk time.
Use only Kyocera-approved batteries and chargers
with your phone. The failure to use a Kyoceraapproved battery and charger may increase the risk
that your phone will overheat, catch fire, or explode,
resulting in serious bodily injury, death, or property
damage.
For a quick check of your battery level, glance at the battery
charge indicator located in the upper right corner of your phone’s
display screen. When there are approximately five minutes of talk
time left, the battery icon () turns red and the phone sounds a
warning tone.
After an additional five minutes or so, the phone sounds a
warning tone three times and then turns off.
Long backlight settings, searching for service, vibrate
Note
mode, browser use, and other variables may reduce the
battery’s talk and standby times.
Watch your phone’s battery level indicator and charge the
Tip
battery before it runs out of power.
Installing the Battery
See “Setting Up Your Phone” on page 2.
2A. Phone Basics11
Phone Basics
Removing the Battery
1. Make sure the power is off so that you don’t lose any stored
numbers or messages.
2. To open, insert a fingernail into the slot ( ), and apply light
pressure while sliding the cover down ( ).
3. Lift the battery up and remove it from the phone ().
WARNING
122A. Phone Basics
Do not handle a damaged or leaking Li-Ion battery
as you can be burned.
Charging the Battery
Keeping track of your battery’s charge is important. If your battery
level becomes too low, your phone automatically turns off, and
you will lose any information you were just working on.
Always use a Kyocera-approved desktop charger, travel charger,
or vehicle power adapter to charge your battery.
1. Plug the phone charger into an electrical outlet.
2. Plug the other end of the phone charger into the micro-USB
connector located on the upper left side of your phone.
With the Kyocera-approved Li-Ion battery, you can recharge the
battery before it becomes completely run down.
Navigating Through the Menus
The navigation key on your phone lets you scroll through menus
quickly and easily. Many menus feature a scroll bar on the right to
help you keep track of your position in the menu.
To navigate through a menu, press the navigation key up or down.
For a diagram of your phone’s menu, please see “Your Phone’s
Menu” on page i.
Selecting Menu Items
As you navigate through the menu, menu options are highlighted.
Select any option by highlighting it and pressing . If the option
is numbered, you can select it by pressing the corresponding
number on the phone’s keypad.
For example, to open the alarm setting screen:
1. Press to access the main menu.
2. Select Too ls by highlighting it and pressing .
3. Select Alarm by highlighting it and pressing .
For the purposes of this guide, the above steps condense into:
䊳 Press > Tools > Alarm.
Backing Up Within a Menu
䊳 Press to go to the previous menu.
䊳 Press to return to standby mode.
Displaying Your Phone Number
䊳 Press > Settings > Phone Info > Phone#/User ID.
Your phone number and other information about your phone and
account will be displayed.
Setting the Keyguard
To avoid accidentally pressing a side button, this feature enables
you to lock side buttons while the phone is closed.
1. Press > Settings > Keyguard.
2. Select On or Off.
You can deactivate this feature temporarily by opening the
Tip
phone, or by pressing and holding the side camera button
while the phone is closed.
Side buttons will be temporarily unlocked, for example, when:
䢇 Receiving a call.
䢇 Talking on a call.
䢇 Receiving voicemail, messages, or calendar or alarm
notifications.
2A. Phone Basics13
Phone Basics
䢇 JAVA or Camera is activated.
IncorrectCorrect
Internal Antenna
䢇 Making an emergency call or in emergency mode.
If you select Icon Only under Messages> Settings >
Note
Notification, notifications will not unlock side buttons. (See
“Setting Message Notification” on page 33.)
Making and Answering Calls
Holding Your Phone
To maximize performance, do not obstruct the internal antenna
area.
142A. Phone Basics
Making Calls
1. Make sure your phone is on.
2. Enter a phone number from standby mode. If you make a
mistake while dialing, press to erase the numbers.
3. Press . (To make a call when you are roaming and Call
Guard is enabled, see “Call Guard” on page 92.)
4. Press or close the phone when you are finished.
If the Parental Controls feature is on and Voice Calls are
Note
restricted, you can only place calls to or receive calls from a
limited set of phone numbers. (See page 39.)
To redial your last outgoing call, press TAL K, highlight the
Tip
call, and then press
When making calls off the home network, always dial using
11 digits (1 + area code + phone number).
You can also place calls from your phone by speed dialing
(page 20), by using Automatic Speech Recognition (page 60), and
by using your History listings (page 45).
TAL K again.
Dialing Options
When you enter numbers in standby mode, you can see available
dialing options by pressing
OPTIONS (right softkey). To select an
option, highlight it and press .
䢇 Save to save a phone number in your Contacts. (See “Saving a
Phone Number” on page 18.)
䢇 Contact Details to view the detailed information of a Contacts
entry when the number you have entered is already saved in
your Contacts.
䢇Hard Pause to insert a hard pause. (See “Dialing and Saving
Phone Numbers With Pauses” on page 19.)
䢇2-Sec. Pause to insert a two-second pause. (See “Dialing
and Saving Phone Numbers With Pauses” on page 19.)
You can also send a text message or picture message
Tip
when the left softkey displays
SEND MESSAGE.
Answering Calls
1. Make sure your phone is on. (If your phone is off, incoming
calls go to voicemail.)
2. Press to answer an incoming call. (Depending on your
settings, you may also answer incoming calls by opening the
phone or pressing other keys. See “Call Answer Mode” on
page 38.)
Your phone notifies you of incoming calls in the following ways:
䢇 The phone rings or vibrates.
䢇 The indicator light flashes.
䢇 The backlight illuminates.
䢇 The screen displays an incoming call message.
If the incoming call is from a number stored in your Contacts, the
entry’s name is displayed. The caller’s phone number may also be
displayed, if available.
For other actions when receiving a call, you can select an
onscreen menu or press a key:
䢇 Press to answer the call in speaker mode.
䢇 Answer to answer the call.
䢇 When connecting via Bluetooth, select Answer with
<Bluetooth device name> or Answer with Phone to answer a
call with your selected device.
䢇 Silence to mute the ringer and stop the vibration. Pressing
or the side camera button has the same effect.
䢇 Send to Voicemail to ignore the call and transfer it to your
voicemail.
2A. Phone Basics15
Phone Basics
䢇 Ignore with Text to ignore the call and send a text message to
the caller.
䢇 Press to ignore the call.
Ignore with Text may not be displayed when calls are from
Note
entries identified as
Unavailable ID.
No Caller ID, Private (Restricted ID), or
Answering a Roam Call With Call Guard Enabled
Call Guard is an option that helps you manage your roaming
charges when making or receiving calls while outside the home
network. Please see “Roaming” on page 91 for more information
about roaming.
䊳 Press , and then press to answer the call. (See
“Call Guard” on page 92 for additional information.)
Ending a Call
䊳 Press .
Missed Call Notification
When an incoming call is not answered, your screen displays the
Missed Call log. Press to dial the phone number.
162A. Phone Basics
To display a Missed Alerts entry from standby mode:
1. Press > Missed Alerts.
2. Highlight the entry you wish to view and press .
Calling Emergency Numbers
You can always place calls to 911 (dial ),
even if your phone is locked or your account is restricted.
During an emergency call, press
display your options. Highlight an option and press .
䢇 Transfer Audio to switch the call to a Bluetooth device (if
applicable).
䢇 Contacts to display your Contacts list.
䢇 Voice Memo to record the other party’s voice.
䢇 Phone Info to display your Phone Info menu.
Press MY PHONE# (left softkey) to display your phone
Tip
number during an emergency call.
Exiting Emergency Mode
If you end the emergency call by pressing , your phone enters
Emergency mode. Press to exit Emergency mode.
OPTIONS (right softkey) to
Enhanced 911 (E911) Information
This phone features an embedded Global Positioning System
(GPS) chip necessary for utilizing E911 emergency location
services where available.
When you place an emergency 911 call, the GPS feature of your
phone seeks information to calculate your approximate location.
Depending on several variables, including availability and access
to satellite signals, it may take up to 30 seconds or more to
determine and report your approximate location.
Important
Always report your location to the 911 operator
when placing an emergency call. Some
designated emergency call takers, known as Public
Safety Answering Points (PSAPs) may not be
equipped to receive GPS location information from
your phone.
In-Call Options
Pressing OPTIONS (right softkey) during a call displays a list of
available in-call features.
䢇 Transfer Audio to switch the call to a Bluetooth device (if
applicable).
䢇 Save to save the current call’s phone number in your Contacts.
䢇 Contact Details to display information about the caller stored in
your Contacts.
䢇 Main Menu to display the phone’s main menu.
䢇 3-Way Call to open a call with two other parties.
䢇 Contacts to display your Contacts list.
䢇 Voice Memo to record the other party’s voice.
䢇 Phone Info to display information about your phone.
Additional in-call options can be accessed by pressing the
following keys or buttons during a call.
䢇 Press the volume button to adjust the receiver volume.
䢇 Press MUTE or UNMUTE (left softkey) to switch between the
mute or unmute mode. (Muting applies to your voice, not the
other party’s.)
䢇 Press to turn the speaker on. Press again to turn it off.
WARNING
Because of higher volume levels, do not place the
phone near your ear during speakerphone use.
2A. Phone Basics17
Phone Basics
End-of-Call Options
After you have finished your call, the phone will display an end-ofcall message. “Call ended” and the duration of the call will
alternately flash beneath the caller’s name (if already in your
Contacts) or the caller’s number (if available). Press any key below
to select an option; press any other key to stop the end-of-call
display.
䢇 Press to call a highlighted entry.
䢇 Press to display all history for a highlighted entry.
䢇 Press OPTIONS (right softkey) to display the Recent History
options. (See “History Options” on page 44 for details.)
䢇 Press SEND MESSAGE (left softkey) to send a text or picture
message.
䢇 Press to return to standby mode.
䢇 Press or simply wait 10 seconds to return to where you
were before the call (if applicable).
If you press a key other than one of those above, the Recent
History screen is displayed. (See “Viewing History” on page 43.)
182A. Phone Basics
Saving a Phone Number
Your phone can store up to 300 Contacts entries and each entry
can contain up to seven phone numbers. (See section 2D,
“Contacts,” on page 47.)
1. From standby mode, enter a phone number and press
OPTIONS (right softkey) > Save. (If this is the first time you
are saving an entry to Contacts, skip to step 3.)
2. Select New Entry or Existing Entry.
3. If you chose New Entry, select a number type, and then
enter the new entry name.
– or –
If you chose
want to save the number, and then highlight a number type
and press .
4. Press DONE (left softkey) to save the entry.
Existing Entry, select an entry to which you
Finding a Phone Number
You can search Contacts entries for phone numbers that contain a
specific string of numbers.
1. Enter four or more digits of the number in standby mode.
(The more numbers you enter, the more specific the search
becomes.)
2. All Contacts entries matching the entered numbers will be
displayed. Highlight an entry and press to dial the
number.
Dialing and Saving Phone Numbers With
Pauses
You can dial or save phone numbers with pauses for use with
automated systems, such as voicemail or credit card billing
numbers.
There are two types of pauses available on your phone:
䢇 Hard Pause sends the next set of numbers when you
press .
䢇 2-Sec. Pause automatically sends the next set of numbers after
two seconds.
You can have multiple pauses in a phone number and
Note
combine two-second and hard pauses.
To dial or save phone numbers with pauses:
1. Enter all or part of a number.
2. Press OPTIONS (right softkey) > Hard Pause or
2-Sec. Pause.
3. Enter additional numbers.
4. Press OPTIONS (right softkey) > Save > New Entry or
Existing Entry to save the number in your Contacts. (See
steps 3 and 4 in “Saving a Phone Number” on page 18.)
– or –
Press to dial the number.
5. Press to send the additional number if you selected
Hard Pause in step 2.
2A. Phone Basics19
Phone Basics
Dialing From the Contacts List
1. From standby mode, press CONTACTS (right softkey).
2. Highlight the entry you want to call.
3. Press to dial the entry’s default phone number.
– or –
Press the navigation key left or right to show another number
for the entry and press .
Plus (+) Code Dialing
When placing international calls, use Plus Code Dialing to
automatically enter the international access code for your
location. (This feature is subject to network availability.)
1. Press and hold to display “+” on your phone screen.
2. Dial the country code and phone number you’re calling, and
press . The access code for international dialing will
automatically be dialed, followed by the country code and
phone number.
202A. Phone Basics
Speed Dialing
You can store up to 98 numbers in your phone’s speed dial
memory to make contacting friends and family easier.
You must assign a speed dial number to the existing phone
number beforehand. See “Assigning Speed Dial Numbers” on
page 51.
To use speed dial for locations 2-9:
䊳 From standby mode, press and hold the appropriate key for
approximately two seconds.
To use speed dial for locations 10-99:
䊳 From standby mode, press appropriate keys, and then
press .
The display confirms that the number has been dialed when it
shows “Connecting...”.
Speed dialing may not be available when you are roaming;
Note
when you are roaming off the home network, you must
always dial using 11 digits (1+ area code + number).
Loading...
+ 96 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.