Sanyo LED-22XR10F User Manual

INSTRUCTION MANUAL

LED-LCD TV

LED-22XR10F

Before connecting, operating or adjusting this product, please read the manual completely. Please keep this manual for future reference.

Contents

Important Information 3

Important Safety Precautions 4

Important Notice 6

Identification of Controls 7

Setting Up 9

Connections 10

First Time Configuration / Basic Operations 14

Memorizing the Channels 18

Programme Edit 19

Adjusting the Picture

Adjusting the Sound

Adjusting Basic Settings 24

Setting Clock & Timer 25

Setting Child and Rating Locks 27

Making Use of Time Shift Function 29

Teletext & Subtitle 30

Adjusting the Computer Image & Setting Hotel Mode

Using MUSIC Player /Using USB Multi Media Player 32

Troubleshooting 35

Specifications 36

Appendix: Installing the Stand 37

IMPORTANT INFORMATION

If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

! Using cabinets or stands recommended by the manufacturer of the television.

! Only using furniture that can safely support the television.

! Ensuring the television is not overhanging the edge of the supporting

furniture.

! Not placing the television on tall furniture (for example, cupboards or

bookcases) without anchoring both the furniture and the television to a suitable support.

! Not standing the televisions on cloth or other materials placed between the

television and supporting furniture.

! Educating children about the dangers of climbing on furniture to reach

the television or its controls.

Warning: To prevent the spread of fire, keep candles or other open flames away from this product at all times.

Important Safety Precautions

Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of your TV product, please read the following precautions carefully before using the product.

1. Read these instructions---All operating instructions must be read and understood before the product is operated.

2. Keep these instructions---These safety and operating instructions must be kept in a safe place for future reference.

3. Heed all warnings---

4. Follow all instructions---All operating instructions must be followed.

5.Attachments---Only use attachments/accessories specified by the manufacturer. Do not use attachments not

recommended by the manufacturer. Use of improper attachments can result in accidents.

6. Power source---This product is intended to be supplied by a listed power supply indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cable system.

7.Power cord protection--convenience receptacles, and the point where they exit from the apparatus.

NOTE: where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall

remain readily operable.

8.Overloading---Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can result in a risk of fire or electric shock.

9.Entering of objects and liquids---Never insert an object into the product through vents or openings. High voltages are present in the product, and inserting an object can cause electric shock and/or short internal parts. For the same reason, do not spill water or liquid on the product.

10. Servicing---Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

11.Damage requiring service---If any of the following conditions occurs, unplug the power cord from the AC outlet, and request a qualified service person to perform repairs.

a. When the power cord or plug is damaged.

b. When a liquid is spilled on the product or when objects have fallen into the product.

c. When the product has been exposed to rain or water.

d. When the product does not operate properly as described in the operating instructions.

Do not touch the controls other than those described in the operating instructions. Improper adjustment of controls not described in the instructions can cause damage, which often requires extensive adjustment work by a qualified technician.

e. If the product has been dropped or the cabinet has been damaged in any way.

f. When the product displays an abnormal condition or exhibits a distinct change in performance. Any noticeable abnormality in the product indicates that the product needs servicing.

12. Replacement parts---In case the product needs replacement parts, make sure that the service person uses replacement parts specified by the manufacturer, or those with the same characteristics and performance as the original parts. Use of unauthorized parts can result in fire, electric shock and/or other danger.

13. Safety checks---Upon completion of service or repair work, request the service technician to perform safety checks to ensure that the product is in proper operating condition.

14. Wall or ceiling mounting---When mounting the product on a wall or ceiling, be sure to install the product according to the method recommended by the manufacturer. This is a safety feature.

All warnings on the product and in the instructions must be observed closely.

Protect the power cord from being walked on or pinched particularly at plugs,

Important Safety Precautions (Continued)

15. Stand---Use only with the cart, stand, tripod, bracket, or table specified by

SOURCEMENU

CH VOL

SOURCEMENU

CH VOL

the manufacturer, or sold with the apparatus. Do not place the product on an unstable trolley, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product. When mounting the product on a wall, be sure to follow the manufacturer’s instructions. Use only the mounting hardware recommended by the manufacturer.

16.Careful move---When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Sudden stops, excessive force and uneven floor surfaces can cause the product to fall from the trolley.

Never attempt to move the TV unless the AC power cord has been disconnected.

17. Lightning---Unplug this apparatus during lightning storms or when unused for long periods of time.

For added protection for this television equipment during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to the equipment due to lightning and power-line surges.

18. Do not use this apparatus near water---for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.

SOU RCE

MEN U

VOL

and that no objects filled with liquids, such as vases, shall be placed on the

The apparatus shall not be exposed to dripping or splashing

apparatus.

Do not use immediately after moving from a low temperature to high temperature environment, as this causes condensation, which may result in fire, electric shock, or other hazards.

19. Clean only with dry cloth---Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth

SOURCEMENU

CH VOL

for cleaning.

20. Ventilation---Do not block any ventilation openings. Install in accordance with the manufacturer instructions. The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar surface,

SOURCEMENU

CH VOL

since they can block ventilation openings. This product is not designed for builtin installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the manufacturer’s instructions are followed.

21.Heat sources---Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

SOURCE

VOL

22.Panel protection---The display panel used in this product is made of glass. Therefore, it can break when the product is dropped or impacted upon by other objects. Be careful not to be injured by broken glass pieces in case the display panel breaks.

23.Pixel defect---The display panel is a very high technology product, giving you

SOU

RCE

finely detailed pictures. Occasionally, a few non-active pixels may appear on the

VOL

screen as a fixed point of blue, green or red. Please note that this does not affect the performance of your product.

WARNING: For continued safety, apparatus with class I construction shall be connected to a mains socket outlet with a protective earthing connection.

Important Notice

About Temperature

Do not use in hot and cold rooms (locations)

! When the unit is used in rooms (locations) with low temperature, the picture may

leave trails or appear slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.

! Do not leave the unit in a hot or cold location. Also, do not leave the unit in a

location exposed to direct sunlight or near a heater, as this may cause the cabinet to deform and the to malfunction.

screen

! Storage temperature: 0°C to 50°C ! Working temperature: 5°C to 40°C

after-

About After-Image

The extended use of fixed image programme material can cause a permanent image

on the screen.

This background image is viewable on normal programs in the form of a stationary fixed image. This type of irreversible screen deterioration can be limited by observing the following steps:

A. Reduce the brightness/contrast setting to a minimum viewing level.

B. Do not display the fixed image for extended periods of time.

C. Turn the power off when not in actual use.

Important Information Regarding Use of Video Games,

Computers, Captions or Other Fixed Image Displays.

! Do not allow a still picture to be displayed for an extended period, as this can cause

a permanent after-image to remain on the screen.

Examples of still pictures include logos, video games, computer images, teletext and images displayed in 4:3 mode.

Cleaning and Maintenance

CAUTIONS:

! The permanent after-image on the screen resulting from fixed image use is not an

operating defect and as such is not covered by the warranty.

! This product is not designed to display fixed images for extended periods of time.

To clean this unit, wipe with a soft, dry cloth.

If the surfaces are extremely dirty, use a soft cloth dipped in a soap and water solution or a weak detergent solution.

Use eyeglass cleaner to remove stubborn dirt from the screen.

Never use alcohol, paint thinner or benzine to clean this unit.

Before using a chemically treated cloth, read the instructions that came with the cloth carefully.

Identification of Controls

Main Unit (front/side view)

SOURCE MENU

CH VOL

1 2

SOURCE

3 4 5 6 7

Note: B^uttons on the TV control panel (CH / , VOL+/-, MENU, SOURCE, POWER ) are touch buttons. First touch of the button will illuminate it. Second touch will fulfill its function. Be sure

button presses must be quickly done before the illumination disappears.

CH VOL

1. Remote sensor

Receives signals from the remote control.

Do not block.

2. Power indicator

Lights blue when in operating mode.

Lights red when in standby mode.

3. POWER

Press this button to turn the unit ON from STANDBY mode. Press it again to turn the set back to STANDBY.

4. SOURCE

To access SOURCE menu

5. MENU Press this button to access the main menu screen.

6. CH

Press these two buttons to directly change the TV channel;

In menu operations, these buttons serve as up/down buttons.

7. VOL+

/–

Press the VOL+ or VOL– button to directly increase or decrease

the sound volume level;

In menu operations, these buttons serve as right/left buttons.

8. Power Switch

Main Unit (back view)

MUS IC/AUD IO

HDM I 1

PC IN

D-S ub

9 8

1. RS-232: For service only. Do not use.

2. AV OUTPUT: Connect a VCR to these jacks to record

RS -23 2

programs.

3. USB port: Connect a USB device to this port.

AUD IO L

VID EO

AV OU T

4. HDMI2: Connect an HDMI device to this jack.

5. Headphone & S/PDIF:

Connect headphones to this jack.

USB

Connect a digital sound system to this jack.

6. COMPONENT IN: Connect a component video device

HDM I 2

to these jacks.

S/P IDF

7. AV INPUT: Connect an AV device to these jacks.

8. RF: Connect an antenna to this jack.

PB PR

9. PC IN D-SUB/AUDIO: Connect a computer to these jacks.

VID EO

COM PONEN T IN

AV IN

AUDI O

10. MUSIC: Connect a MP3 player to this jack.

11. HDMI1: Connect an HDMI device to this jack.

Remote control unit

Identification of Controls (Continued)

1. POWER: Switches the TV power on or Standby.

2. S.MODE: Selects sound mode.

3. P.MODE: Selects picture mode.

15 16

4. FAV.LIST: Displays the favorite channel list.

5. FAV+/ FAV–: Selects the favorite channel.

6. MENU: Displays the main menu screen.

7.5/6/3/4/OK: Press the arrows to navigate through the menus or adjust an item. Press OK to confirm a selection or enter a sub-menu.

8. EPG: Displays the Electronic programme Guide (DTV only).

9. 0 – 9 number buttons: Press to enter channel numbers or input

password.

10. ZOOM: Selects the screen size.

11. CH / : Changes channel up and down.

12.Coloured buttons (RED/GREEN/YELLOW/BLUE): Direct

access to the coloured items or corresponding pages. (Teletext)

13. Teletext control buttons

. TTX: Used to enter or exit teletext mode. (Teletext)

. Hold: To stop or resume sub-page acquisition. (Teletext)

. Reveal: To reveal or hide the concealed information. (Teletext)

. Size: Press this button several times to display the upper, then the

. Subtitle: Displays the subtitle; or the teletext subpage (Teletext)

25. Control buttons when using time shift/Media Player

T.SHIFT( ): time shift button

: Play/Pause button

: STOP button

: Repeat mode select (USB)

/ : Fast forward/fast reverse

/ : Previous/next

lower part of the screen and then return to the normal size teletext page. (Teletext)

. Index: Press this button to view the main index page.(Teletext)

. Mix:

transparent background while viewing the TV programme simultaneously

. Update:

(Teletext)

14. TV/Radio: Switches between TV and Radio mode. (DTV only)

15. SOURCE: Displays input source menu.

16. STEREO: Selects bilingual, stereo or mono ( ATV only ), or audio

track(DTV only).

17. FREEZE: To freeze current picture.

18. SLEEP: Sets the sleep timer.

19. EXIT: Exits the menu screen.

20. LIST: Displays the channel list.

21. RECALL: Returns to the previous channel.

22. INFO: Displays the information banner.

23. VOL+/–: Increases or decreases the volume.

24. MUTE: Mutes the sound.

Press the button to display the Teletext on the screen with

. (Teletext)

Press the button to view the updated teletext page.

Setting Up

Selecting a location

Installing remote control Batteries

You should select a location for the TV:

·Where direct light does not reflect on the screen.

·That has indirect and soft lighting.

·Where the TV has access to an antenna or cable TV connection.

·Where the TV has access to a power outlet.

Note: Watching TV in total darkness or with a reflection on the screen may cause eyestrain.

To install remote control batteries:

Open the battery cover.

Insert two AAA batteries into the battery compartment. Make sure

that the + and – symbols on the batteries match the + and – symbols in the battery compartment.

Replace the cover.

Battery precautions:

Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the instructions below.

·Place batteries with their terminals corresponding to the (+) and (–)

indications.

·Different types of batteries have different characteristics. Do not mix

batteries of different types.

Aiming the remote control

·Do not mix old and new batteries. Mixing old and new batteries can

shorten the life of new batteries and/or cause old batteries to leak chemicals.

·Remove batteries as soon as they are non-operable. Chemicals that leak

from batteries can cause a rash. If chemical leakage is found, wipe with a cloth.

·Dispose of batteries in a proper manner.

·If the remote control is not used for an extended period of time, remove

the batteries.

·The batteries shall not be exposed to excessive heat such as sunshine, fire

or the like.

Use the remote control by pointing it towards the remote sensor on the front of your TV. Objects between the remote control and the remote sensor may prevent proper operation.

Cautions regarding use of remote control

·Do not expose the remote control to shock. In addition, do not expose the

remote control to liquids, and do not place in an area with high humidity.

·Do not install or place the remote control under direct sunlight. The heat

may cause deformation of the unit.

·The remote control may not work properly if the remote sensor window

of the main unit is under direct sunlight or strong lighting. In such a case, change the angle of the lighting or the TV set, or operate the remote control closer to the remote sensor window.

Connections

Cautions Before Connecting

=When connecting an external device to the TV, make sure that the TV and the device are turned off. =Check the plugs on the ends of cables to make sure that they are the correct type before you try plugging them into jacks

on the TV.

=Make sure that all plugs are securely inserted into the jacks. Loose connections can result in image or color problems. =The illustration of the external device may be different depending on your model. =Refer to the operating manual of the external device as well.

Antenna Connection

HDMI 1

PC IN

MUSI C/AUD IO

D-S ub

75-ohm coaxial cable

(round cable)

Power Connection

·Connect one end of your antenna cable to the RF jack on the back of

the TV, then connect the other end of the cable to the antenna wall jack.

Note:

=It is recommended that the 75-ohm coaxial cable be used to eliminate

interference and noise which may occur due to radio wave conditions.

=The antenna cable should not be bundled with the power cord and the like.

=If the antenna is not installed properly, contact your dealer for assistance.

Connect the power cord to a power outlet.

Household power outlet

AC cord

Note:

=This product should be operated only from the type of power source indicated

on the marking label.

=Always unplug the AC cord from power outlet when not using for a long period

of time.

=This illustration is for reference only. The AC plug may be different on different

models.

Connecting a USB device

TV Side

To USB port

Connections(Continued)

Insert your USB device into the USB port.

To play from the USB device:

1. Turn on your TV, then press SOURCE button. The Input Source menu opens.

2. Press 5or6to select USB, then press OK to confirm.

Never remove the USB device or turn off the TV while using the USB device.

Connecting Headphones

TV Side

Headphones

Connecting a MP3 player

MP3 player

TV Rear

HDM I 1

PC IN

MUS IC/AU DIO

D-S ub

To connect headphones:

Insert the plug of the headphone into the TV’s Headphone jack. When using headphones, adjust the headphone volume so as to avoid excessive levels, as hearing damage may result.

Insert MP3 player headphone plug into the MUSIC jack on the back of the TV. Be sure to insert fully, otherwise it may not sound right.

To listen to music from MP3 player through TV

1. Turn on your TV, then press SOURCE button. The Input Source

menu opens.

2. Press5or6to select Music, then press OK to confirm.

3. Turn on your MP3 player and begin playing music. Refer to the instructions that came with the MP3 player.

Connecting a digital sound system

TV Side

Optical

cable

Digital sound system

S/PDIF IN

(optical)

For a full Home Theater sound experience, you must connect your digital sound system to the S/PDIF OUT( ) jack on the

Mini-TOSLINK

TV rear.

Note:

! To connect to the S/PDIF OUT (Mini-TOSLINK) jack, a Mini-

TOSLINK adapter is required to connect an Optical Cable to this jack.

! The headphone output and S/PDIF OUT share the same jack. So

when you want to use S/PDIF, please disconnect your headphone, and vice versa.

Connections(Continued)

Connecting an HDMI device

HDMI OUT

HDMI device

HDMI cable

TV Side

Connecting a component video device

DVD Player, etc.

Component cables often have red, green, and blue c o l o r - c o d e d v i d e o

- -

connectors and red and white audio connectors. Match the colors when making connections.

How to connect an HDMI device:

Connect the HDMI cable between the HDMI jack on the TV (HDMI1 located at TV rear, while HDMI2 at TV side) and HDMI output jack on the device.

Note: If your device has an HDMI connection, we recommend you use that to get the best quality possible.

To play from the HDMI device:

1. Turn on your TV, then press SOURCE button. The Input Source menu opens.

2. Press 5or6to select HDMI1 or HDMI2 correspondingly, then press OK to confirm.

3. Turn on the HDMI device and set it to the correct mode. Refer to the instructions that came with the HDMI device.

Note:

If the external device has DVI output only, use a DVI to HDMI adapter cable to connect to the HDMI terminal. Connect the audio cable to the PC IN AUDIO jack on the TV rear.

To connect a component video device:

Connect the Component Video cable between the Y, Cb/Pb, Cr/Pr input jacks on the TV and Y, Cb/Pb, Cr/Pr output jacks on the device .

Connect the Audio cable between the AUDIO input jacks on the TV and AUDIO output jacks on the device.

Component video cable

Audio cable

Connecting a computer

TV REAR

Audio cable

PC IN

MUS IC/AUD IO

HDM I 1

D-S ub

To monitor port (15-pin D-Sub)

D-Sub cable

To play from the component video device:

1. Turn on your TV, then press SOURCE button. The Input Source menu opens.

2. Press 5or6 to select Component, then press OK to confirm.

3. Turn on your external device and set it to the correct mode. See the device’s user guide for more information.

To connect a computer:

Connect a VGA cable between the VGA jack on the computer and the VGA input jack on the unit.

Connect an Audio cable between the AUDIO output on the computer and AUDIO input jack on the unit.

To play video from the computer:

1. Turn on your TV, then press SOURCE button. The Input Source menu opens.

2. Press 5 or 6 to select D-SUB, then press OK to confirm.

3. Turn on your computer, and adjust the display properties as required.

To audio output jack

Note: The MUSIC and PC IN share the same audio jack. So when you want to connect PC, please disconnect your MP3 player, and vice versa.

+ 26 hidden pages