Sanyo KIR-SE1S Installation Manual

2 3 4 5 6 7 8
9
10 11 12 13 14
Safety Precaution
Before you use this product, please read and follow this “Safety Precaution” carefully. In addition, please keep it at a convenient place so that it can be found anytime by other per sons who use it aft er you have read it.
( )
Regarding the display
Danger
Warning
Caution
The situati on where imminent danger such as fatal accident or server injury mig ht o ccu r.
The situation wher e there is a possibil­ity that people might be killed or severely injured.
The content where there is a possibility that people might b e severely injure d or it might cause physical damag e.
Examples of displayed symbols
This symbol shows certain situation that draws warning or caution. In the drawing, the specific content of the caution is described. (example  a caution in electric s hock)
This symbol compels or instructs certain action. In the drawing, the specific conten t of the instruction is described. (example a power plug is to be pulled out from an outlet)
This symbol show s that certain action should b e restricted. In the drawing or at its nearby, the specific content of the restriction is described. (example a split restriction)
Danger
Danger
Please do not use it f or purposes o ther than heating
Please do not expose to liquids
This might cause liquid leakage, generation of heat, rupture, ignition and breakdow n.
When liquid such as water enters it, this might cause gener ation of heat , electric shock and breakdown.
Please do not throw it into fire
This might cause liquid leakage, ignition, generation of heat and damage.
Please do not use it or leave it in places of high temperature
Do not put it near fire, near the st ove or in a car under hot sun. T his might cause deformation, breakdo wn or burning.
Please do not short-circuit the jack or plug
This might cause breakdown of equipment or injury to the user.
Please take precaution of liquid leakage
When the liquid in this product goes into your eyes, please do not rub them. Instead, rinse your eyes with clean water and go to see a doctor immediately. This might cause blindness.
Please do not split it up or remodel it
Please use the dedicated AC adaptor
This might cause liquid leakage, ignition, generation of heat and breakdown. For disposal of the product, please follow the instruc­tions in "Collection and Recycle o f Lithium-ion battery"
To charge Kairo using an AC plug, please use the enclosed AC adaptor. Do not use an electronic transformer. This might c ause generation of heat, ignition and breakdown.
Caution
Please do not charge a wet Kairo or a wet AC adaptor. This might cause gener ation of heat, ignition, or rup ture.
Please do not pu t heavy items on the cord. This might cause electric shock or fire.
Please do not put it on an unstable place like on a shaky table or on a tilting place, etc. If it falls down, this might cause a breakdown or injury to people.
Please do not store it in a humid, dusty or very hot place. This might cause a breakdown.
Please keep it in a place where babies cannot reach. Otherwise it could cause injury.
When it is used by a child, the guardians should instruct on the way to use it. In addition, please confirm whe ther the child follows the ins truction while he or she uses it.
If any abnormality occurs on your skin due to the use of this product, please stop using it and see a doctor.
Please pull out the AC plug from the outlet and store it properly except when you are charging it. It might cause injury if a pow er plug is left in the outlet.
Warning
Please do not use it when abnormalities such as odor, generation of heat, change in color, deforma­tion etc. occur while it is in use or when it is stored. This might cause leakage of liquid, ignition, genera­tion of heat and rupture.
When the liquid in this product adheres to your skin or clothing, p lease rins e it imme diately with clean water. This might cause damage to your skin.
For connection to a supply not in the U.S.A., use an attachment plug adap ter of T he proper conf igura­tion for the power outlet.
Please stop the charging if i t is not finished even after a prescribed time has passed. If it is not stopped, it might cause leakage of liquid, ignition, generation of hea t and rupture.
Please do not use it in a humid place such as in the bathroom. This might cause generation of heat, electric shock and breakdown.
Do not damage a cord by stamping on it or lay it under the equipment. Please do not use a cord that has been damaged a s this might c ause electric shock, generation of heat and fire.
Please do not put it in a heating device such as a microwave oven or a high-pr essure container. This might cause genera tion of heat, emission of smoke, ignition or breakdown of c ircuit components.
Please do not give it a strong bang or throw it. This might cause a break down or fire.
Please charge it in a stable place. In addition, do not cover or wrap it with a cloth. This might cause an explosion or fire due to the heat generat ed.
Please do not use it in places where there is a risk of ignition or explo sion. This mi ght cause an explosion or fire.
Regarding low-temperature burning
Each Part name
How to read the Display
When you believe that a breakdown has occurred
Specifications
How to remove the battery
Features
Please take note of the followings during charging and use
How to maintain it
Charging Kairo
Each Part name & Use
Collection and Recycle of Lithium-ion battery (battery cannot be replaced)
Precautions in preventing
low-temperature burning
Low-temperature burning is a burning that causes symptoms such as erythema or w ater blisters when our bodies are exposed to a heating element which is o f a higher-temperature than the bo dy temperature for a long perio d. Please take note that there are low-t emperature burnings that do not cause subjective symptoms.
When the external temperature is low, there might be cases where this product does not warm up fully. In this case, use a special case or cloth to warp up Kairo so that it is not exposed to ex ternal air.
Charging should be carried out at a temperature between
0/40˚C (
32/104 ℉)
.
Only the metal part s at the thermal section of this product will bec ome warm.
Even if the AC adaptor becomes warm while charging, is not a malfunction.
When there is noise coming from a radio or TV while charging, place this product far away from the radio or TV.
The maintenance shall be carried out with a dry cloth. When a we t cloth is used instead, it might cause a br eakdown. In addition, when alcohol, thinner, benzene or a detergen t is used for cleaning, the printing might be faded or the color might appear faint.
This product is designed to prevent an increase in heating which is a main cause o f low-temperature burning. However, depending on individual differences or the way of using it, the possibility of you suffering from low-temperature burning might differ. Therefore, please take note of the f ollowing points when you us e it.
1. Please switch off the Temperature switch.
2. Plug the DC connector of the AC adaptor into the DC input jack of Kairo.
Make sure that the DC connector is plugged in all
the wa y.
3. Unfold the AC plug of the AC adaptor in the direction of the arrow and insert it into an electrical outlet (see the illustration below). The Luminescent Display lights up in green, indicating that the charging has started.
Make sure that the AC adaptor is plugged into an
AC outlet. Charging time: Abou t 3 hours
4. When the charging is complete, the green light on the Luminescent Display disappears.
5. After Kairo is charged, pull out the AC plug of the AC adaptor from the outlet and fold it. Then pull out the DC connector from Kairo
Operating Kairo
1. Please switch on the Temperature switch.
Confirm that the luminesce nt displa y blinks slowly
in either red or orange.
When the luminescent display blinks in red (at
around every 0.5 second), there is either a tempera ­ture protection or abnormality in the equipment. This should be dealt with by Troubleshooting. Please see " When you believ e that a breakdown has occurred" on page 11 and follow the instruc­tions.
2. When you want to stop using Kairo, please switch off the Temperature switch.
Persistent switching of tempreture on/off function
will consume electricity quickly and shorten usage time. In such a case, please charge Kairo as soon as possible.
*Even if the temperature switch is turned on during
charging, Kairo does not become warm. Please stop charging Kairo before you start using it.
• Do not expose your skin by putting Kairo in the special case for a
long period.
• Confirm your skin condition every one hour. If you find some
abnormalities on you skin, stop using it immediately.
• Stop using it when you feel too hot.
•� Do not use it when you sleep because you are prone to suffer
fr om low-temperatur e burning while sleep ing.
•� Take note of low-temperature burning especially for those whose
skins are sensitive, or for infants or handicapped people.
• Take note when you use it on thin clothing such as underwear.
• Do not use it near heating equipment or a stove because it is
very hot.
• Do not use it if you have blood cir culation problems such as
having diabetes since you might suffer from low-temperature burnin g.
Kairo
Front
Back
Temperature switch
This is the power switch of Kairo. The modes include "OFF" and 2 tempera ture options, "Strong" and "Weak"
The power supply unit intended correctly orientated in a vertical or floor mount position.
Luminescent display
*See "How to read the Luminescent Display"
DC connector
AC plug
To charge Kairo, plug the DC connector into the DC input jack of Kairo
This is a folding plug
Warm part
This part will become warm when the Temperature switch is turned on
Strap hole
DC input jack
Unfolding AC plug
Connections for charging Kairo
Tem p er at ur e s w it c h
OFF
ON
Low
ON
High
Orange
(it blinks slowly at around every 3 seconds)
Red
(it blinks slowly at around every 2 seconds)
Green
(light on)
Green
(light on and disappear)
Display content
Green
(light up)
Green
(it blinks slowly at around every 1 second)
Green
(it blinks fast at around every 0.5 second)
Phenomenon The Cause How to deal with it
Model
Input
Dimensions
Weight
Rechargeable Kair o
KIR-SE1
DC5V 1A
84x61x19mm (3.3×2.4×0.75”)
About 80g
AC adaptor
KIR-AD01U
AC100V-240V 50-60HZ 12-17VA
66x43x23mm (2.6 × 1.7 ×0.9”)
About 65g
Meaning of display
Operate
(don't need to charge)
Operate
The residual power of the battery is low.
Kairo (Low) is operating.
Kairo (High) is operating.
It is charging.
Charging has completed.
Content of display Meaning of display
<Battery level>
Switching the Temperature switch from ON to OFF will display the battery le vel for ab out 3 se conds.
If you cannot solve your problem by applying the methods as described in the following "How to deal with it" section, stop using it and consult our customer service at 1-800-263-2244.
*1.The period of replacement of this product might dif fer according to the c ondition of usage.
*1.Above thermal sec tion temperature are under room temperature around 20˚C (68
℉)
*2.Maximum temperature which refers to switch is ON, the highest temperature it can reach within
short period of time
*3.Continuous using (time), refers to pla cing the Kairo into the case / bag provided and place it
among the clo ths for warming purpose. Temperature w ill change along with the var iation of environmental temperature.
*4.Persistent switching of temperature on/o ff function w ould consume electricit y quickly and
shorten the using time o f Kairo.
They damage plastic
Even when the temperature switch is turned on, it does not become warm.
The battery in Kairo has been used up.
Charging is going on.
Charge Kair o.
Even if the temperature switch is turned on, Kairo does not become warm during charging. Please stop char ging Kairo when you use it.
The charging time is too short.
Please use Kairo after charging it.
The product has entered its replacement phase.
When the time o f usage of Kairo becomes e xtremely short even a fter charging it, the battery life has been reached. (*1)
Persistent switching o f temperature on/o ff function light
When persistent switching of temperature on/off function is seen, please charge Kairo as soon as possible.
The temperature is inappropriate where the charging is performe d.
Charge Kairo at a temperature between 0/40˚C (
32/104 ℉).
Insert it into the DC input jack of Kairo securely.
The DC connecter has not been inserted pr operly.
Insert it into the outlet sec urel y.
The AC plug has not been inserted properly.
Insert the AC adap tor again and charge it at a temperature between
0/40˚C (
32/104 ℉).
Abnormalities such as temperature protec tion.
The time of usage of Kairo is short.
The charging time is long (compared t o normal charging time).
The red light is blinking fas t. (at around every
0.5 second)
Charging cannot be done. (The green light does not light up)
Range of Working Temperatur e
Built-in bat tery
Charging time
Temperature switch
Low
High
Low
High
Maximum temper ature(*2)
45˚C (113 ℉) 50˚C (122 ℉)
10˚C (5 0 ℉)
About 180 ~ 240 min.
About 150 ~ 210 min.
0˚C (32 ℉)
About 120 ~ 200 min.
About 100 ~ 180 min.
Average temperature(*1)
39˚C (102 ℉) 43˚C (109 ℉)
Lithium ion battery 3.7V 1800mAh
About 3 hours
Range of Charging Temperatur e
0/40˚C (32/104 ℉)
-10 - 40˚C (14 - 104 ℉)
Rechargeable type Kairo Details of specifications
Thermal Section Temperature(*2)
Time of continuous usage (*3, 4)
Temperature
switch
Ambient temperature
Never disassemble the product except for disposal purposes
This product uses a Lithium-ion battery. Please do not dispose of the battery if it is no longer in use. Please take it to a recycling center that handles rechar geable batteries.
Before removing the Lithium-ion battery pack, switch on the Temperature switch. Make sure that the Luminescent Display indicates Low Battery Level and Kairo does not become warm, then remove the battery according to t he following steps:
5. Remove the battery from the Kairo case. If the battery is difficult to remove because of the lead wire running above the top of the battery, first remove the smaller circuit board from the case, then remove the b attery.
To avoid a short circui t in the removed Lithium-ion bat tery, cover the connector part of the battery with an insulation tape and place the battery in the rechargeable battery recycling box at a recycle center. For recycling locations collecting rechargeable batteries, please visit www. rbrc.org.
1. Use a toothpick, etc. to remove the round sticker on the thermal section.
2. Use a Phillips screwdriver to remove the s crew from the cover of the thermal sect ion and take off the cover.
3. Use the Phillips screwdriver to remove the 4 screws from the Kairo case and open the case.
4. Remove the connector attached to the circuit board by pulling it upward.
Battery
Instruction Manual
Rechargeable Hand Warmer
Thank you very much for purchasing this product. Before you start using it, please read and follow this instruction manual carefully. This leaflet also includes a limited warranty. Please keep it in a safe place.
The built-in lithium ion battery can be recharged hundreds of times.
Worldwide voltages (AC 100-240 V)
• �2 temperature settings
IMPORTANT SAFTY INSTRUCTIONS
– SAVE THESE INSTRUCTIONS.
DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, CA REFULLY FOLLOW THESE INSTRUCTIONS.”
This product is a rechargeable Kairo that comes with a built-in lithium ion battery. Be sure to charge it before you use it for the first time or when you have not used it for a long time. In addition, please take precaution to avoid low temperature burns while using it.
This product uses a Lithium-ion battery. Please do not dispose of the battery if it is no longer in use. Please take it to a recycling center that handles rechargeable bat teries.
ca.sanyo.com Please unfold the manual
OBLIGATIONS
In order to obtain warranty service, the product must be delivered to and picked up from an authorized Sanyo factory service center at the user’s expense, unless specifically stated otherwise in this warranty. The names and addresses of Authorized Sanyo Fisher Service Centers may be obtained by calling the toll-free number listed below.
For product operation, authorized service center referral
or service assistance,call
CUSTOMER INFORMATION: (USA 1-800-421-5013)
(MEXICO 0001-800-726-9975)
Weekdays 7:30 A.M - 5 P.M. Pacific Time
(Canada 1-800-263-2244 - Weekdays 8:30 A.M. - 5:00 P.M. Eastern Time)
THIS WARRANTY IS VALID ONLY ON SANYO PRODUCTS PURCHASED OR RENTED AND USED IN CANADA OR IN MEXICO OR IN THE UNITED STATES OF AMERICA, EXCLUDING ALL U.S. TERRITORIES AND PROTECTORATES. THIS WARRANTY APPLIES TO THE ORIGINAL RETAIL USER AND DOES NOT APPLY TO PRODUCTS USED FOR ANY INDUSTRIAL, PROFESSIONAL OR COMMERCIAL PURPOSE. THE ORIGINAL DATED BILL OF SALE, SALES SLIP OR RENTAL AGREEMENT MUST BE SUBMITTED TO THE AUTHORIZED SANYO SERVICE CENTER AT THE TIME WARRANTY SERVICE IS REQUESTED. Subject to the OBLIGATIONS above and EXCLUSIONS below, SANYO FISHER COMPANY (SFC) warrants this SANYO product against defects in material and workmanship for the periods of LABOR and PARTS specified below. SFC will repair or replace (at its option) the product and any of its parts which fail to conform to this warranty. The warranty period commences on the date the product was first purchased or rented at retail.
For Product Purchased in Canada: Please visit ca.sanyo.com for up-to-date-Warranty details.
EXCLUSIONS
This warranty does not cover (A) the adjustment of customer-operated controls as explained in the appropriate model’s instructions manual, or (B) the repair of any product whose serial number has been altered, defaced or removed.
AC adaptor
This warranty shall not apply to and any damage initiated by spark fires caused by using anything metal inside the product, except those accessories approved by SFC. This warranty does not apply to uncrating, set up, installation, removal of the product for repair or reinstallation of the product after repair. This warranty does not apply to repair replacements necessitated by any use beyond the control of SFC including, but not limited to, any malfunction, defect or failure caused by or resulting from unauthorized service or parts, improper maintenance, operation contrary to furnished instructions, shipping or transit accidents, modifications or repair by the user, abuse, misuse, neglect, accident, incorrect power line voltage, fire, flood, or other Acts of God, or normal wear and tear. The foregoing is in lieu of all other warranties and SFC does not assume or authorize any party to assume for it any other obligation or liability. THE DURATION OF ANY WARRANTIES WHICH MAY BE IMPLIED BY LAW (INCLUDING THE WARRANTIES OF MERCHANTIBILITY AND FITNESS) IS LIMITED TO THE TERM OF THIS WARRANTY. IN NO EVENT SHALL SFC BE LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM OWNERSHIP OR USE OF THIS PRODUCT, OR FOR ANY DELAY IN THE PERFORMANCE OF ITS OBLIGATIONS UNDER THIS WARRANTY DUE TO CAUSES BEYOND ITS CONTROL. IN THE UNITED STATES AND CANADA, SOME STATES AND PROVINCES, RESPECTIVELY, DO NOT ALLOW LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS AND/OR DO NOT ALLOW THE EXCLUSION OR LIMITATION OF CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE, FROM PROVINCE TO PROVINCE, AND FROM COUNTRY TO COUNTRY. For your protection in the event of theft or loss of this product, please fill in the information below for your own personal records.
Model No. _______________________________________________
Serial No. _______________________________________________ (Located on back or bottom side of unit)
Date of Purchase _________________________________________
Purchase Price ___________________________________________
Where Purchased_________________________________________
Limited Warranty
SANYO Kairo
LABOR PARTS
1 YEAR 1 YEAR
Loading...