Sanyo FVD4064, DP40D64, FW24E05T User Manual

Page 1
FVD4064
1080
Page 2
1
The mains plug/appliance coupler is used as disconnect device, the disconnect device shall remain readily operable.
Page 3
2
15. An outside antenna system should not be located in the vicinity of overhead power lines or other electrical light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
Page 4
3
16.Wall or Ceiling Mounting – The product should be mounted to a wall or ceiling only as recommended by the manufacturer.
17. Apparatus shall not be exposed to dripping or splashing, and no object filled with liquids, such as vases, shall be placed on it.
18. When the MAINS plug is used as the disconnect device, the disconnect device shall remain readily operable.
Note to CATV system installer:
This reminder is provided to call CATV system installer’s attention to Article 820-40 of the NEC that provides guideline for proper grounding and , in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.”
Page 5
4
Table of Contents
Chapter 1: Connections and Setup
Chapter 2: Menu Operation
Chapter 3:Other Information
5 5 6 6 7 7 8 9 11 12 12 12 13 14
1 2
14 14 15 16 16 17 19 20 20 20 21
22 23 25 25 25 26
Before Initial Setup ..............................................................................................................................
Check Supplied Parts...........................................................................................................................
Attaching Your TV to the Table Stand ..................................................................................................
Mounting Your TV to the Wall .............................................................................................................
Buttons on the TV ................................................................................................................................
Explanation of jacks on TV ..................................................................................................................
Choose Your Connections ..................................................................................................................
MHL ....................................................................................................................................................
Remote Control Functions ..................................................................................................................
Obtain the Signal ................................................................................................................................
Switching On .......................................................................................................................................
Switching Off .......................................................................................................................................
Setup Wizard .......................................................................................................................................
Input List ..............................................................................................................................................
Important Information ...........................................................................................................................
Important Safety Instructions ................................................................................................................
Menu .....................................................................................................................................................
Picture ..................................................................................................................................................
Sound ...................................................................................................................................................
Time ......................................................................................................................................................
Setup ....................................................................................................................................................
Lock .....................................................................................................................................................
Channel ................................................................................................................................................
PC ........................................................................................................................................................
VIDEO/ HDMI ......................................................................................................................................
USB ......................................................................................................................................................
Photo ....................................................................................................................................................
Frequently Asked Questions(FAQs) ....................................................................................................
Troubleshooting ....................................................................................................................................
Care and Cleaning ...............................................................................................................................
Television Specifications ......................................................................................................................
Specification .........................................................................................................................................
Limited Warranty ...................................................................................................................................
Page 6
5
Chapter 1
QUIK'N EASY Setup Guide
Page 7
6
FVD4064
M6
2
M5 screw
2
2
Note:Stand base screws are located in the literature package. mounting screws measurements:M5(5mm)Diameter,Length-12mm(maximum);
Length-20mm(maximum)
M4(4mm)Diameter,
Recommendation to buy screws : M6X12
4
Page 8
7
Buttons on the TV
Take a certain model for an example:
1
2
3
5
4
OPTICAL OUTPUTIt is possible to output audio through the digital audio terminal.
(Composite)
Green
(Effective Conditions: Setup/Video Setting/Auto Detection or Composite)
Y
Device
Video
6
ENTER
7
1
2
3
4
5
6
7
Page 9
8
AUDIO OUTPUT the socket provides composite audio connection.
ANTENNA/CABLE IN this socket can be used to connect the outside aerial (including the analog signal and the digital signal)
3
HDMI 2 /*MHL(High-Definition Multimedia Interface/Mobile High-Definition Link)
Provides an uncompressed digital connection that carries both video and audio data by way of an integrated mini-plug cable.Since HDMI technology is based on Mobile High-Definition Link(MHL),the jack on the side of your TV is also compatible with MHL Device.
MHL2.0
The TV can support amplified high power audio equipment. Please adjust the volume directly on the external audio equipment. Please do not connect headphones directly to the TV.
1080p/30Hz,
1080p/30Hz,
Compatibility
side
Device
Digital
Page 10
9
The MHL (Mobile High-Definition Link) enables the TV to communicate with connected MHL-compatible device. When connecting MHL-compatible device, TV simultaneously charges the connected device while playing photo/music/video from it. You can use the TV remote control to control the connected MHL
-compatible device.
• If “MHL Equipment Control”(P17) is set to “On” , the TV automatically switches to MHL mode when MHL-compatible device is connected to HDMI I2(MHL) jack.
• You can continue normal usage of the connected MHL-compatible device (such as receiving calls) depending on its capability.
• Some remote functions may not be available depending on features of the connected MHL-compatible device. Please refer to the device manual for details.
• You can continue charging the MHL-compatible device even when the TV is in standby mode.
• This product is officially MHL-certified for guaranteed operation with other MHL-certified devices. If you encounter any problems when using the MHL function, please consult the device manufacturer for support.
(*MHL)
MHL
Page 11
10
3
3
List
Video
VIDEO INPUT
(*MHL)
Page 12
11
when short press / to select the desired option , then press Input
opens the Input list ,then press
button to exit.
Page 13
12
Page 14
13
ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency(EPA).
ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S.Department of Energy helping us all save money and protect the environment through energy efficient products and practices.
Setup Wizard
Setup Wizard
Please select your preferred mode
Please select your preferred mode
Move
Select
Select
MENU
MENU
Exit
Exit
TV Location
TV Location
Go to next step
Go to next step
Store Mode
Home Mode
A menu screen asks you to set the power on mode.
ChoosingHome Mode”for the TV assings the optimal picture settings for most home environments.
ChoosingStore Mode”,which is not ENERGY STAR compliant,sets the unit up with predefined settings for retail displays. In this setting, the power consumption may exceed the requirements of the ENERGY STAR qualification. Use / to
select the desired location setting(Home Mode or “Store Mode”);then press ENTER to continue to the next screen.
Setup Wizard
Connect an RF cable from the TV s input called RF-Inand to your TV Aerial socket.
Select TV Location
1. Press / button on the remote control to select Home Mode or Store Mode.
2. Press button on the remote control to select go to next step and press ENTER button to go.
Setup Wizard
Please select your preferred mode
Move
Select
MENU
Exit
TV Location Go to next step
Home Mode
1. Press / button on the remote control to select the antenna type.
2. Press button on the remote control to select go to next step and press ENTER button to start auto scan.
Move
Page 15
14
Input List
Press INPUT button to select among TV/VIDEO /HDMI 1/HDMI 2/HDMI 3/PC/USB
Menu
1. Press MENU to display the main menu or return to the previous menu or close the main menu.
2. Press / to highlight the desired menu icon, and press to .enter
Menu Operation
Picture
1. Press MENU to enter the main menu, Press / button to select.
2. Press to enter.(Press MENU again to exit or back to parent menu.)
3.Press / button to select among Picture Mode/ Brightness / Contrast / Color / Tint / Sharpness / Color Temperature / Backlight/Detailed Settings.
4.Press ENTER / to enter.
5.Press / button to adjust.
6.Press MENU to exit it
Move
Select
MENU
Return
Picture Mode Adjust picture mode to change picture appearance.
Press / button to select(Standard / Vivid / Mild / Manual/Power Saving).
Standard Produces a highly defined image in a normally lit room.
Vivid Produces a highly defined image in a brightly lit room
Mild Produces a highly defined image in a soft lit room.
Manual Select to customize picture settings.
Power Saving Select to power saving mode settings.
Note: "Power Saving"make this product qualify for ENERGY STAR, if you select some other options,the power consumption may change.
Picture
Sou nd
Sound
Time
Time
Set up
Setup
Loc k
Lock
Cha nnel
Channel
Picture Mode Brightness Contrast Color Tint Sharpness Color Temperature Backlight Detailed Setting
Manual
50 50 50
Normal
50 50
50
Setup Wizard
MENU
Exit
Analog
:
0
Digital
:
0
RF CH
:
5
Total Found
:
0
Pic ture
Setup Wizard
Move
Select
MENU
Return
Air/Cable Go to next step
Air
Select the antenna type then auto scan
Page 16
Tint
Adjust the hue(Red,Green,Blue) of the picture. Press button to adjust. /
Sharpness
Object edges are enhanced for picture detail. Press button to adjust. /
Color Temperature
Change the overall color cast of the picture.
Normal Warm Cool
Produces a vivid image. Produces a red-hued image. Produces a gentle blue-hued image.
Backlight
Detailed Setting
Adjust the backlight brightness Press button to adjust.
Press button to enter.
Menu OperationMenu OperationChapter 2
Sound
1.Press MENU to enter the main menu, Press / button
to select.
2.Press to enter.(Press MENU again to exit or back to parent menu.)
3. Press / button to select among Sound Mode / Bass / Treble /Balance / MTS / Audio Language / Surround Sound / Auto Volume Control
4.Press / button to adjust.
5.Press MENU again or back to parent menu.
MTS
Configures the multi-track sound. It is only available in ATV.
Press button to select(Mono/Stereo/SAP). /
Mono Sets the sound to mono. Stereo Sets the sound to stereo when stereo
is not available, the sound is
automatically switched to mono.
SAP Sets the sound to the second audio
program.
Audio Language
Select the language supported by the chosen digital channel. It is available Only in DTV.
Press button to select(English / / ). / French Spanish
Surround sound
Press / button to select(On / Off).
Auto Volume Control
Set the auto volume control. Press / button to select(On / Off).
Color Adjust the color intensity of the picture.
Press button to adjust. /
Contrast
Adjust the white level of the picture. Press / button to adjust.
15
Brightness
Adjust darkness of black sections in the picture. Press / button to adjust.
Aspect Ratio
Adjust how the picture fills the screen.
Normal
Wide
Zoom
Automatically adjust Aspect Ratio
based on TV size and TV program.
Use to watch wide screen(16:9)
content.
Expands image to fill screen. Top and
button maybe cut off.
Noise Reduction Set options to reduce video noise.
Off
Select to turn off video noise detection. Low Detect and reduce low video noise. Medium Detect and reduce moderate video
High Detect and reduce enhanced video
noise.
noise.
Move
Select
MENU
Return
Time Set up Lock Cha nnelPic ture
Pic ture
Sou nd
Sound Mode Bass Treble
Audio Language
Auto Volume Control
Surround Sound
Standard
50 50 50
English
Off
Off
Off
Balance
MTS
Stereo
Items below are active while Picture mode set to Manual. otherwise, they are gray.
Page 17
3.Press / button to adjust.
4.Press MENU again or back to parent menu.
Sleep Timer
Set a timer for the TV to turn off automatically. Press / button to select(Off / 5min / 10min / 15min / 30min / 60min / 90min / 120min / 180min /240min).
3.Press / button to select among Menu Language /
Closed Caption /Over Scan/Input Label / Other settings /Restore Default /Setup Wizard.
4.Press button to adjust. /
5. ENU again or back to parent menu. Press M
Menu language
Press button to select language(English / /
Française/ Español.)
Closed Caption
Adjust Closed Captioning settings. Only available under TV and AV source. Press / button to enter. ENTER
CC Mode
Turn Closed Captioning on/off.
Press button to select(CC Off / CC On / CC / On Mute).
Analog CC
Set Closed Captioning for standard(analog) program. Press button to select(CC1 / CC2 / CC3 /CC4 / / Text1 / Text2 / Text3 / Text4).
Digital CC
Set Closed Captioning for digital program. Press button to select(Off / Service1 / Service2 / / Service3 / Service4 / Service5 / Service6).
Setup
1.Press MENU to enter the main menu, Press / Button to select.
2.Press to enter.(Press MENU again to exit or back to parent menu.)
16
Move
Select
MENU
Return
Set up Lock Cha nnelPic ture
Pic ture
Time
Sou nd
Sleep Timer
Off
Move
Select
MENU
Return
Loc k Cha nnelPic ture
Pic ture
Sou nd
English
Off
Set up
Menu Language Closed Caption
Over Scan
Other Settings
Input Label
Restore Default Setup Wizard
Adjust the digital Closed Captioning setting.
Mode
Set the look of digital Closed Captioning. Press button to select(Default / Custom). /
Font Style
Select from 8 font styles. Press button to select(Default / Font 0 / Font 1 / / Font 2 / Font 3 / Font 4 / Font 5 / Font 6 / Font 7).
Option
Time
Font Size
Adjust the size of the digital Closed Captioning font. Press button to select(Default /Normal / Large / Small).
Press / button to enter.ENTER
Time
1.Press MENU to enter the main menu, Press /
button to select.
2.Press to enter.(Press MENU again to exit or back to parent menu.)
Menu Operation
Page 18
FG Opacity
Adjust the transparency of the digital Closed Captioning font. Press button to select(Default / Solid / Flashing // Translucent / ).Transparent
BG Opacity
Adjust the digital Closed Captioning background transparency. Press button to select(Default / Solid / / Flashing / Translucent / ). Transparent
*N ot e: All the options can be adjusted while the
mode is Custom.
Lock
1.Press ENU to enter the main menu, Press M /
button to select.
4.Press / button to select among Change Password /
System Lock / Input Block / US Rating / Canada Rating / RRT Setting / Reset RRT.
5.Press button to adjust. /
6.Press ENU again or back to parent menu. M
17
2.Press to enter.()Press ENU again to exit or
back to parent menu.
M
3.Enter your 4-digital password. Default password is
0000.
0-9
MENU
Return
Cha nnelPic ture
Pic ture
Sou nd
Time
Set up Lock
Enter Password
-----
Press the code the enter a new 4-digital password then re-enter it to confirm.
Change Password
Move
Next
MENU
Return
Cha nnelPic ture
Pic ture
Sou nd
Time
Set up Lock
Input Block US Rating Canada Rating
RRT Setting Reset RRT
System Lock
Change Password
On
Input Label
Over Scan
Other Settings
Set the parameter of audio only.
Press / button to enter. ENTER
Press / button to enter. ENTER
Audio Only
Play the audio with the picture turned off. When you turn the Audio Only on and exit the OSD menu, the panel will be dark; and then press any key(except Mute key and VOL -/+ key) to exit the Audio Only status.
Press button to select(On / Off). /
Press button to select(On / Off). /
Press button to select(On / Off). /
Press button to select(On / Off). /
Press button to select(On / Off). /
Press button to select. /
Blue Screen
The setting of Blue Screen on/off
The setting of Over Scan on/off
Video Setting
Store Demo
MHL Equipment Control
To relevant settings for video.
About this TV set presentation.
FG Color
Adjust the color of the digital Closed Captioning font. Press button to select(Default/ White /Red / / Green /Blue/ Yellow / Magenta / Cyan).
BG Color
Adjust the digital Closed Captioning background color. Press button to select(Default/ Black / / Red / Green / Blue / Yellow / Magenta / Cyan).
When "On" is selected, the HDMI2 source will auto­matically be chosen when MHL equipment is connected. When "Off" is selected, the HDMI2 source will need to be selected manually.
System Lock
Lock or unlock the buttons on the TV. Press button to select(Off / On). /
Menu Operation
Page 19
US Rating】
Restrict movie and TV programs by US Ratings. Only available when "System Lock" is "on".
TV
The TV rating compose of two aspects: age-based
and content-based.
Age
TV-Y TV-Y7
TV-G TV-PG
TV-14 TV-MA
Define
General audience Parental guidance suggested Parents strongly cautioned Retricted
No one 17 and under admitted Adult audience only
No te: The content ratings will increase depending on the level of the age-based rating. For example, a program with a TV-PG V(violence) rating may contain moderate violence, while a TV-14 V (violence) rating may contain intense violence. So locking a higher level option will automatically cause locking the options that has more sensitive level.
MPAA
This system defines the rating control which come from MPAA rules.
Rating
G PG
PG-13
R
NC-17 X
Define as
General audience. All ages admitted. Parental guidance suggested. Some material may not be suitable for children. Parents strongly cautioned. Some material may be inappropriate for children under 13. Restricted. Children under 17 require accompanying parent or adult guardian. No one 17 and under admitted. Adult audience only.
18
Canada Rating
Restrict movie and TV programs by Canadian Ratings.
Only available when "System Lock" is "on".
For Canada, the rating setting include the following options: Canada English, Canada .French
Canada English
These ratings are for programs which are using English rating system.
Rating
C C8+ G PG 14+ 18+
Defined as
Children Children 8 years and older General programming Parental guidance Viewers 14 and older Adult programming
Canada
The ratings are for programs which are using French rating system.
French
Rating
G 8 ans+
Defined as
General Not recommended for children under age 8
13 ans+
Not recommended for children under age 13
Move
Select
MENU
Return
Cha nnelPic ture
Pic ture
Sou nd
Time
Set up Lock
Video HDMI 1
PC USB
TV
HDMI 2 HDMI 3
UnBlock UnBlock UnBlock UnBlock UnBlock UnBlock UnBlock
Move
Select
MENU
Return
Cha nnelPic ture
Pic ture
Sou nd
Time
Set up Lock
FV V S L D
ALL
TV Rating
Press OK to Lock or Unlock
16 ans+
18 ans+
Not recommended for children under age 16 This program is restricted to adults
RRT Setting
Display an advance V-Chip rating table for digital channels. The item is available only When current stream has downloadable rating data.
Press ENTER/ button to enter.
Press ENTER/ button to enter.
Input Block
Block or unblock the input sources. Press ENTER/ button to enter. Press button to select(Unblock / Block). /
Menu Operation
Page 20
Channel
1.Press ENU to enter the main menu, Press M /
button to select.
2.Press to enter.( ENU again to exit or back to parent menu.)
MPress
3.Press / button to select among Air/Cable / Auto
Scan / Favorite / Channel List / Show/Hide / Channel Number / Channel Label.
4.Press button to adjust. /
5.Press ENU again or back to parent menu. M
Air/Cable
Select signal type.
Press button to select(Air/Cable). /
Auto Scan
Automatically search for channels. Press / button to enter. ENTER
Are you sure to Auto
Scan?
No
Yes
Analog Digital RF CH Total Found
1 0 4 1
: : : :
Favorites
Add channels to create a favorite list. Press ENTER/ button to enter.
Press ENTER/ button to enter.
Channel List
Create list for channels.
Show/Hide
Show or hide the channels in your program list. Press / button to enter.ENTER
Press / button to enter.ENTER
Channel Number
Show the channel number.
Press button to adjust. /
Channel Label
Create labels for channels, up to 7 characters.
19
Reset RRT
Reset the RRT to default. The item is available only When current stream has downloadable rating data.
Move
Select
Select
Move
MENU
MENU
Return
Return
Sou nd
Sou nd
Time
Time
Set up
Set up
Loc k
Loc k
Pic ture
Pic ture
Pic ture
Pic ture
Cha nnel
Cha nnel
Favorite Channel List Show/ Hide Channel Number Channel Label
Auto Scan
Air/Cable
Air
45-0
Sou nd
Sou nd
Time
Time
Set up
Set up
Loc k
Loc k
Pic ture
Pic ture
Pic ture
Pic ture
Cha nnel
Cha nnel
Channel
Channel
Channel Label
Channel Label
3-0
3-0
3-0
3-0
3-0
3-0
3-0
3-0
3-0
3-0
Prev
Prev
1/ 2
1/ 2
Next
Next
Press“ok”change
Press“ok”change
Move
Move
Return
Return
MENU
MENU
Hide
Menu Operation
Page 21
H-Pos
Adjust the horizontal position of the picture. Press button to adjust. /
V-Pos Adjust the vertical position of the picture. Press button to adjust. /
Clock Minimize vertical stripes in the screen image. Press button to adjust. /
Phase Minimize horizontal distortion. Press button to adjust. /
Auto
Adjust to the PC signal timing automatically.
Press button to enter.
*N ot e:
1. PICTURE menu and description are the same as that for TV mode.
2. Audio Language in SOUND menu is invalid.
3. TIME menu and description are the same as that for TV mode.
4.Close Caption in SETUP menu is invalid.
5.US, Canada, RRT Setting and Reset RRT in LOCK menu is invalid.
6.PC mode has no CHANNEL menu.
PC
1.Press to select PC source.INPUT
2.Press ENU to enter the main menu, Press
button to select Setup menu.
M /
3.Press to select PC Settings.
4.Press / button to select among H-Pos / V-Pos /
Clock / Phase / Auto .
5.Press to enter.
6.Press button to adjust. /
7.Press ENU again or back to parent menu. M
20
VIDEO / HDMI
1. PICTURE menu and description are the same as that for TV mode.
2. Audio Language in SOUND menu is invalid.
3. TIME menu and description are the same as that for TV mode.
4.The function of Close Caption is available only in AV/TV mode.
5.US, Canada, RRT Setting and Reset RRT in LOCK menu is invalid.
6.Composite/ COMPONENT / HDMI mode has no CHANNEL menu.
* Before operating Media menu, Plug in USB device, then press INPUT button to set the Input Source to USB.
No te :
Press / button to select USB in the Source menu, then press ENTER button to access.
USB
Move
Adjust
MENU
Return
Loc k Cha nnelPic ture
Pic ture
Sou nd
Set up
Time
H-Pos V-Pos Clock Phase Auto
50 50 50 25
Menu Operation
Move
Select
MENU
Return
Loc k Cha nnelPic ture
Pic ture
Sou nd
English
Off
Set up
Menu Language Closed Caption
Over Scan
Other Settings
Input Label
Restore Default
Time
PC Settings
Page 22
5.Press / button to select the file you want to watch in the file selecting menu, then press ENTER button to displaypicture.
Photo
*N ot e: Only support JPG format
21
1.Press INPUT button to display the input source list.
2.Press / button to select USB.
3.Press button to enter .
4.Press / button to select drive disk you want to watch, then press button to enter.
ENTER
ENTER
Press button to enter. ENTER
Menu Operation
Photo
USB 2.0
CReturn
1 / 1
C:\
img20051.jpg
img2005123.jpg img2005124.jpg
img20051.jpg
Return
Resolution: 1024 X 768 Size: 582KBytes Date: 2008/03/24 Time: 16:41:53
Pause Prev. Ne xt Sto p Rep eatAL L Pla ylist I nfo. Rotate
1 / 1
Page 23
22
Other Information
Chapter 3
Page 24
23
Other Information
VIDEO INPUT
Check your connections. If you used Composite yellow, red, and white cables to connect, make sure they're connected to the green VIDEO INPUT, and the red and white
Page 25
24
Other Information
Lock
Enter Password
System lock,
System lock
Page 26
25
Other Information
Specification
Power Requirement: Source: AC 120V, 60Hz
AC Power Consumption: 70 watts
Weight: 23.1 lbs (w/stand)
Dimensions _________________________
WIDTH HEIGHT DEPTH
w/stand 36.4 24.1 8.9
36.4 21.8 3.7
w/out stand
NOTE: Dimensions are in inches
Page 27
26
Page 28
72-40D64M-X93Z1
• MHL, Mobile High-Definition Link and the MHL Logo are trademarks or registered trademarks of MHL Licensing, LLC.
California
Loading...