DSA26
No.634-1/3
Features
•
Plastic molded type.
• Glass passivation for high reliability.
• Peak reverse voltage : V
RM
=200, 600V.
• Average rectified current : I
O
=2.6A.
Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter Symbol Conditions DSA26C DSA26G Unit
Peak Reverse Voltage V
RM
200 600 V
Average Recitified Current I
O
T a=40 °C ➝ 2.6 A
Ta=40°C, with 2 Cu fins of 20✕20✕1mm
3
➝ 3.5 A
Surge Forward Current I
FSM
50Hz sine wave, 1 cycle ➝ 120 A
Junction T emperature Tj ➝ 150 °C
Storage T emperature T stg ➝ --30 to +150 °C
Electrical Characteristics at Ta=25°C
Ratings
Parameter Symbol Conditions
min typ max
Unit
Forward Voltage V
F
IF=2.6A 1.05 V
Reverse Current I
R
VR : At each V
RM
10.0 µA
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
Ordering number : ENN634E
DSA26
Package Dimensions
unit : mm
1086
[DSA26]
41000 GI IM / 53098 HA (KT) / D218 TA, TS
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft's
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
Diffused Junction Type Silicon Diode
2.6A Power Rectifier
25.0 7.0 25.0
1.4
4.4
Cathode mark