Sanyo CE37FH08-B Instruction Manual
INSTRUCTION MANUAL
Colour television
CE37FH08-B
1 - 34
ENGLISH
Please read this Instruction book before using your television.
We wish you many hours of pleasure from your new television.
Problems with set-up?
Call 0844 335 2230
Contents
Features ................................................................. 2
Introduction ............................................................. 2
Package Contents .................................................. 2
Preparation ............................................................. 3
Safety Precautions .................................................3
Power Source ..................................................... 3
Power Cord ......................................................... 3
Moisture and Water ............................................3
Cleaning..............................................................3
Heat and Flames ................................................3
Lightning ............................................................. 3
Replacement Parts .............................................3
Servicing ............................................................. 3
Waste Disposal ................................................... 3
FOR EU USERS ................................................. 4
Disconnecting the Device ...................................4
Headphone Volume ............................................ 4
Installation...........................................................4
LCD Screen ........................................................ 4
Warning ..............................................................4
Electrical device not in the hands of children .....4
Connection to a Television Distribution System
(Cable TV etc.) from Tuner ................................. 4
Environmental Information ..................................... 5
Repair Information ..............................................5
Inserting Batteries in the Remote Control...............6
Operating Range for the Remote Control ............... 6
Switching the TV On/Off ......................................... 6
To Switch the TV On ........................................... 6
To Switch the TV Off ........................................... 6
Overview of the Remote Control ............................7
LCD TV and Operating Buttons .............................. 8
Viewing the Connections- Back Connectors ..........8
Viewing the Connections - Side Connectors ........ 10
Power Connection ................................................ 10
Aerial Connection ................................................. 10
Using USB Input ....................................................11
USB Memory Connection ..................................11
Connecting the LCD TV to a PC ............................11
Connecting to a DVD Player................................. 12
Using Side AV Connectors ...................................12
Connecting Other Equipment via Scart ................ 12
Using the Cable Holder ........................................12
Initial Settings ....................................................... 13
Input Selection ...................................................... 14
Basic Operations .................................................. 14
Operation with the Buttons of the TV ................ 14
Operation with the Remote Control ..................14
General Operation ................................................ 15
Electronic Programme Guide (EPG).................15
Programme Options..........................................16
Analogue Teletext .............................................16
Widescreen ....................................................... 16
IDTV Menu System ..............................................16
Channel List ...................................................... 16
Navigating the Entire Channel List ...................16
Moving the channels in the channel list ............ 16
Deleting the Channels in the Channel List .......17
Renaming channels .......................................... 17
Adding Locks to Channels ................................ 17
Setting Favourites ............................................. 17
Program Guide .................................................18
Common Interface ........................................... 18
TV Setup ........................................................... 18
Setup ................................................................ 18
Confi guration ....................................................18
Language Settings ............................................ 20
Installation.........................................................21
Analogue TV Menu System .................................. 22
Picture Menu.....................................................22
Sound Menu .....................................................23
Feature Menu ...................................................23
Install Menu ......................................................25
Source Menu ....................................................26
Media Browser Menu............................................ 26
Playing .mp3 Files ............................................27
Playing .jpg Files...............................................27
PC Mode Menu System........................................ 27
Displaying TV Information .................................... 28
Mute Function ....................................................... 28
Picture Mode Selection......................................... 28
Freezing Picture ...................................................28
Zoom Modes......................................................... 28
Auto .................................................................. 28
16:9 ................................................................... 28
4:3 ..................................................................... 28
Panoramic.........................................................28
14:9 ................................................................... 28
Cinema ............................................................. 28
Subtitle .............................................................. 28
Zoom.................................................................29
T eletext ................................................................. 29
Tips .......................................................................30
Screen Care......................................................30
Image Persistence ............................................ 30
No Power .......................................................... 30
Poor Picture ...................................................... 30
No Picture ......................................................... 30
Sound ............................................................... 30
Remote Control.................................................30
Input Sources....................................................30
Appendix A: PC Input Typical Display Modes .......31
Appendix B: AV and HDMI Signal Compatibility
(Input Signal Types) .............................................. 32
Appendix C: Supported File Formats for USB Mode .. 33
Appendix D: Supported DVI Resolutions..............33
Specifi cations .......................................................34
Digital Reception (DVB-T) .................................... 34
Digital Reception (DVB-T2) .................................. 34
Important Instruction ............................................. 35
English - 1 -
Features
SCREEN
LANG
SUBTTL
PIP
1 2 3
4 65
97 8
0
RETURN
MENU
EPG FAV
SOURCE
PRESETS
SLEEP
INFO/?
++
--
V
OK
V
--
++
• Remote controlled colour LCD TV.
• Fully integrated digital TV (DVB-T , DVB-T2 - MPEG2
MPEG4).
• DTV input supports 1920x1080i
• HDMI connectors for digital video and audio. This
connection is also designed to accept high defi nition
signals.
• USB input.
• 200 programmes from VHF, UHF(analogue).
• 1000 programmes for digital mode (IDTV).
• Integrated tuner DVB-T HD, MPEG 2 / MPEG 4
compatible.
• OSD menu system.
• Two scart sockets for external devices (such as
video, video games, audio set, etc.).
• Stereo sound system. (German+Nicam)
• Teletext, fastext, TOP text.
• Headphone connection.
• Automatic programming system.
• Forward or backward manual tuning.
• Automatic sound mute when no transmission.
• NTSC playback.
• AVL (Automatic Volume Limiting).
• When no valid signal is detected, after 5 minutes the
TV switches itself automatically to standby mode.
• PLL (Frequency Search).
• PC input.
• Plug&Play for Windows 98, ME, 2000, XP, Vista,
Windows 7.
• Audio line out.
• Game Mode
Introduction
Thank you for choosing this product. This manual will
guide you for the proper operation of your
TV. Before operating the TV, please read
this manual thoroughly.
Please do keep this manual in a safe place
for future references.
Read the corresponding instructions of this
handbook prior to the fi rst usage of the
device, even when the usage of electronic devices is
familiar to you. Notice especially the chapter SAFETY
PRECAUTIONS. Carefully keep the handbook as
future reference. When selling the device or giving it
away, absolutely give these direction for use.
• This device is intended to receive and display TV
programs. The different connection options make
an additional expansion of the reception and display
sources possible (receiver, DVD player, DVD
recorder, VCR, PC etc.). This device is only suitable
for the operation in dry interiors. This appliance is
intended solely for private domestic use and may not
be used for industrial and commercial purposes. We
exclude liability in principle, if the device is not used
as intended, or unauthorized modifi cations have
been made. To operate your LCD-TV in extreme
ambient conditions may cause the damage of the
device.
Package Contents
Note: You should check the accessories after purchasing.
Make sure that each accessory is included.
English - 2 -
LANG
SCREEN
EPG
P
OK
RETURN
MENU
Remote
Control
SUBTTL
PRESETS
PIP
SLEEP
Batteries: 2 X AAA
P
SOURCE
INFO/?
LCD TV
Instruction Book
Cable Holer
Preparation
For ventilation, leave a free space of at least 10 cm
all around the set. To prevent any fault and unsafe
situations, please do not place any objects on top
of the set.
Use this device in moderate climates.
Operating temperature: 0 0C to +40 0C .
10 cm
10 cm
10 cm
Safety Precautions
Please read the following recommended
safety precautions carefully for your
safety.
Power Source
The TV set should be operated only from a 220-240
V AC, 50 Hz outlet. Ensure that you select the correct
voltage setting for your convenience.
Power Cord
Do not place the set, a piece of furniture, etc. on the
power cord (mains lead) or pinch the cord. Handle the
power cord by the plug. Do not unplug the appliance
by pulling from the power cord and never touch the
power cord with wet hands as this could cause a short
circuit or electric shock. Never make a knot in the cord
or tie it with other cords. The power cords should be
placed in such a way that they are not likely to be
stepped on. A damaged power cord can cause fi re or
give you an electric shock. When it is damaged and
needs to be replaced, it should be done by qualifi ed
personnel.
Moisture and Water
Do not use this device in a humid and
damp place (avoid the bathroom, the
sink in the kitchen, and near the washing
machine). Do not expose this device to
rain or water, as this may be dangerous
and do not place objects fi lled with liquids,
such as fl ower vases, on top. Avoid from
dripping or splashing.
If any solid object or liquid falls into the cabinet, unplug
the TV and have it checked by qualifi ed personnel
before operating it any further.
Cleaning
Before cleaning, unplug the TV set
from the wall outlet. Do not use liquid or
aerosol cleaners. Use soft and dry cloth.
Ventilation
The slots and openings on the TV set are intended for
ventilation and to ensure reliable operation. T o prevent
overheating, these openings must not be blocked or
covered in anyway.
Heat and Flames
The set should not be placed near to open
fl ames and sources of intense heat such
as an electric heater. Ensure that no open
fl ame sources, such as lighted candles,
are placed on top of the TV. Batteries
should not be exposed to excessive heat
such as sunshine, fi re or the like.
Lightning
In case of storm and lightning or when
going on holiday, disconnect the power
cord from the wall outlet.
Replacement Parts
When replacement parts are required, make sure that
the service technician has used replacement parts,
which are specifi ed by the manufacturer or have the
same specifi cations as the original one. Unauthorized
substitutions may result in fi re, electrical shock or
other hazards.
Servicing
Please refer all servicing to qualified
personnel. Do not remove the cover
yourself as this may result in an electric
shock.
Waste Disposal
Instructions for waste disposal:
• Packaging and packaging aids are recyclable and
should principally be recycled. Packaging materials,
such as foil bag, must be kept away from children.
• Batteries, including those which are heavy metalfree, should not be disposed of with household
waste. Please dispose of used battery in an
environment friendly manner. Find out about the
legal regulations which apply in your area. Don’t try
to recharge batteries. Danger of explosion. Replace
batteries only with the same or equivalent type.
• Cold cathode fluorescent lamp in LCD PANEL
contains a small amount of mercury; please follow
the local laws or regulations for disposal.
English - 3 -
FOR EU USERS
The symbol mark and recycling systems described
below apply to EU countries and do not apply to
countries in other areas of the world.
Your SANYO product is designed and manufactured
with high quality materials and
components which can be recycled
and/or reused.
The symbol mark means that
electrical and electronic equipment,
batteries and accumulators, at their
end-of-life, should be disposed of
separately from your household
waste.
Note:
If a chemical symbol is printed beneath the symbol
mark, this chemical symbol means that the battery
or accumulator contains a heavy metal at a certain
concentration. This will be indicated as follows: Hg:
mercury, Cd: cadmium, Pb: lead
In the European Union there are separate collection
systems for used electrical and electronic equipment,
batteries and accumulators.
Please, dispose of them correctly at your local
community waste collection/recycling centre.
Please, help us to conserve the environment we
live in
Disconnecting the Device
The mains plug is used to disconnect TV set from
the mains and therefore it must remain readily
operable.
Headphone Volume
Excessive sound pressure from earphones
and headphones can cause hearing loss.
Installation
To prevent injury, this device must be securely
attached to the wall in accordance with the installation
instructions when mounted to the wall (if the option
is available).
LCD Screen
The LCD panel is a very high technology product
with over 6 million thin fi lm transistors, giving you fi ne
picture details. Occasionally, a few non-active pixels
may appear on the screen as a fi xed blue, green or
red point. Please note that this does not affect the
performance of your product.
Warning
Do not leave your TV in standby or operating mode
when you leave your house.
•The Standby / On button doesn´t separate this
device completely from mains. Moreover the device
English - 4 -
consumes power in the standby operation. In order
to separate the device completely from mains, the
mains plug has to be pulled from the mains socket.
Because of that the device should be set up in a
way, that an unobstructed access to mains socket
is guaranteed, so that in case of emergency the
mains plug can be pulled immediately. To exclude
the danger of fi re, the power cord should principally
be separated from the mains socket prior to a longer
period of non-usage, i.e. during vacations.
Electrical device not in the hands of
children
Never let children use electrical device unsupervised.
Children can´t always recognize properly the
possible dangers. Batteries / accumulators can be
life threatening when swallowed. Store batteries
unreachable for small children. In case of swallowing
a battery medical aid has to be sought immediately.
Also keep the packaging foils away from children.
There is danger of suffocation.
Connection to a Television
Distribution System (Cable TV etc.)
from Tuner
Device connected to the protective earthing of the
building installation through the mains connection or
through other apparatus with a connection to protective
earthing-and to a television distribution system using
coaxial cable, may in some circumstances create a
fi re hazard.
Connection to a cable distribution system has
therefore to be provided through a device providing
electrical isolation below a certain frequency range
(galvanic isolator, see EN 60728-11).
LICENSE NOTICE
Manufactured under license from Dolby
Laboratories.
TRADEMARK ACKNOWLEDGMENT
“Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.
Environmental Information
• This television is designed to consume less energy
to save environment.
You not only help to save the environment but also
you can save money by reducing electricity bills
thanks to the energy effi ciency feauture of this TV.
To reduce energy consumption, you should take the
following steps:
• You can use Power Save Mode setting, located in
the Feature menu. If you set Power Save Mode
as On, the TV will switch to energy-saving mode
and luminance level of TV set will be decreased to
optimum level. Note that some picture settings will
be unavailable to be changed when the TV is in
Power Save Mode.
• When the TV is not in use, please switch off or
disconnect the TV from the mains plug. This will
also reduce energy consumption.
• Disconnect power when going away for longer
time.
• Note that annually, using the TV set in Power Save
Mode has more power effi ciency than disconnecting
the TV from the mains plug instead of keeping
stand-by mode. Therefore it is highly recommended
to activate Power Save Mode setting to reduce
your annual power consumption.And also it is
recommended to disconnect the TV from the mains
plug to save energy more when you do not use.
• Please helps us to save environment by following
these steps.
Repair Information
Please refer all servicing to qualifi ed personnel. Only
qualifi ed personnel must repair the TV. Please contact
your local dealer, where you have purchased this TV
for further information.
English - 5 -
Inserting Batteries in the
SCREEN
LANG
SUBTTL
PIP
1 2 3
4 65
97 8
0
RETURN
MENU
EPG
FAV
SOURCE
PRESETS
SLEEP
INFO/?
++
--
V
OK
V
--
++
Remote Control
• Remove the battery cover located on the back of
the remote control by gently pulling backwards from
the indicated part.
• Insert two AAA/R3 or equivalent type batteries
inside. Observe the correct polarity (+/-) when
inserting batteries and replace the battery cover.
-
+
Note: Remove the battery from remote control when it is not
to be used for a long period. Otherwise it can be damaged
due to any leakage of batteries.
+
-
Operating Range for the
Remote Control
• Point the top of the remote control toward the LCD
TV’s remote sensor LED while pressing a button.
Switching the TV On/Off
To Switch the TV On
Connect the power cord to the 220-240V AC 50 Hz.
Please Note: On/off switch is located on the left-hand
side of the TV (from front view).
• Switch the “ ” button to position “|” so the TV
will switch to standby mode. Then the standby LED
lights up.
• To switch on the TV from standby mode either:
• T ouch the “ ” button, P+ / P- or a numeric button
on the remote control.
• Touch the “
The TV will then switch on.
Note: If you switch on your TV via PROGRAMME UP/DOWN
buttons on the remote control or on the TV set, the programme
that you were watching last will be reselected.
By either method the TV will switch on.
To Switch the TV Off
• Switch the “ ” button to position 2 as illustrated,
so the TV will switch OFF.
• To power down the TV completely, unplug the
power cord from the mains socket.
Note: When the TV is switched to standby mode, standby LED
can blink to indicate that features such as Standby Search or
Over Air Download is active.
Note: This is normal operation and is not considered as a
fault.
Note: The TV switch on time is about 23 seconds please do
not touch the ON button again during this time as this will
return the TV to Stand by mode.
” or +/- button on the TV.
30° 30°
LANG
SUBTTL
SCREEN
PIP
EPG
FAV
SLEEP
PRESETS
P
P
SOURCE
Remote range is approximately 7m/23ft
OK
RETURN
INFO/?
MENU
Remote Control
Sensor
English - 6 -
Overview of the Remote Control
SCREEN
LANG
SUBTTL
PIP
1 2 3
4 65
97 8
0
RETURN
MENU
EPG FAV
SOURCE
PRESETS
SLEEP
INFO/?
OK
--
V
--
++
V
++
Mono/Stereo - Dual I-II1.
Expand (in TXT mode)/ Image size2.
Electronic programme guide (in DTV mode)3.
Favourite Mode Selection (in DTV mode)4.
Red /Sound Menu5.
Green / Picture Menu / Subtitle on-off (in DTV 6.
mode)
Numeric buttons 7.
Teletext / Mix / PAT (in TXT mode)8.
Volume Down9.
Programme Down / Page up (in DTV mode)10.
Mute11.
Navigation buttons12.
Exit (in DTV mode) / Return / Index page (in 13.
TXT mode)
Menu14.
Info / Reveal (in TXT mode)15.
Okay (Store) / Select / Channel list (in DTV 16.
mode) / Hold (in TXT mode)
AV / Source17.
Programme Up / Page down (in DTV mode)18.
Volume Up19.
Previous programme20.
Yellow / Feature Menu21.
Blue / Install Menu22.
Picture Mode Selecion23.
Sleep Timer24.
No function25.
Subtitle on-off (in DTV mode) / TXT subtitle26.
Standby / On27.
1
4
6
7
8
9
10
11
12
13
27
26
LANG
2
3
SCREEN
EPG
SUBTTL
PRESETS
PIP
SLEEP
5
25
24
23
22
21
20
19
P
P
SOURCE
18
17
16
OK
RETURN
MENU
INFO/?
15
14
Note: The Red, Green, Yellow and Blue Menu function quick
access buttons do not operate for DTV mode due to Mheg
functionality requirements.
English - 7 -
You can use numeric buttons on the remote control
to input letters when necessary. Pressing the numeric
buttons ‘0...9’ inputs letters assigned to that button.
Letters are present one by one as the button is
pressed. Table below shows the assigned letters:
1/ABC
2/DEF
3/GHI
4/JKL
5/MNO
6/PQR
7/STU
8/VWX
9/YZ
LCD TV and Operating Buttons
FRONT and REAR VIEW SIDE VIEW Control Buttons
Standby button1.
TV/AV button2.
Programme Up/Down 3.
Standby LED
buttons
Volume Up/Down buttons4.
Note: Touch “
buttons at the same time to view
main menu.
Viewing the Connections- Back Connectors
12
LAN
” and “ ”
EXT 2
EXT 1
Subwoofer Out1. is for connecting an external, active subwoofer to the set to give a much deeper bass
effect.
Use an appropriate RCA cable to connect the set to a subwoofer unit.
Audio Line Outs2. output audio signals to an external device such as an optional sound system.
To connect the external speakers to your TV, use AUDIO LINE OUTS of the TV with an audio cable.
EXT 23. inputs or outputs for external devices.
EXT 14. inputs or outputs for external devices.
Connect the
SCART cable between EXT (SCART) sockets on TV and EXT (SCART) socket on your
English - 8 -
external device (such as a decoder, a VCR or a DVD player).
Note: If an external device is connected via the EXT (SCART) sockets, the TV will automatically switch
to AV mode. If both sockets are employed at the same time, EXT 1 will override EXT 2 unless manually
selected.
Note: You should connect the decoder to EXT-1, if you are planning to watch a scrambled channel.
The decoder might not function properly if you do not connect the decoder to the EXT 1 socket.
Component Video Inputs (YPbPr)5. are used for connecting component video.
You can connect the component video and audio sockets with a device that has component output.
Connect the component video cables between the COMPONENT VIDEO INPUTS on on the TV and
the component video outputs of your device. While connecting, be sure that the letters on your TV, “Y”,
“Pb”, “Pr” correspond with your device’s connectors.
PC/YPbPr Audio Inputs6. are used for connecting audio signals of a PC or a device that connects to the
TV via YPbPr.
Connect the PC audio cable between the AUDIO INPUTS on the TV and audio output of your PC to
enable PC audio.
Connect the audio cable between AUDIO INPUTS on the TV and audio outputs of your device to
enable component audio.
S/PDIF Coaxial Out7. outputs digital audio signals of the currently watched source.
Use an SPDIF coaxial cable to transfer audio signals to a device that has S/PDIF input.
RF Input8. connects to an
Note that if you use a decoder or a media recorder, you should connect the aerial cable through the
device to the television with an appropriate antenna cable, as shown in the illustration in page 10.
Ethernet (LAN) Input 9. is used for MHEG return channel (future service, currently under development
by broadcaster).
PC Input10. is for connecting a personal computer to the TV set.
Connect the PC cable between the PC INPUT on the TV and the PC output on your PC.
HDMI 2: HDMI Input11.
HDMI 1: HDMI Input12.
HDMI Inputs are for connecting a device that has an HDMI socket. Your LCD Television is capable of
displaying High Defi nition pictures from devices such as a High Defi nition Satellite Receiver or DVD
Player. These devices must be connected via the HDMI sockets or Component Socket. No sound
connection is needed for an HDMI to HDMI connection.
antenna.
When you use the wall mount kit (optional) with the LCD TV, we would defi nitely recommend to plug all your
cables into the back of the LCD before mounting to the wall.
English - 9 -
Viewing the Connections - Side Connectors
SERVICE
CI Slot is used for inserting a CI card. A CI card allows you to view all 1.
the channels that you subscribe to. For more information, see “Common
Interface” section.
Side USB Input 1. 2.
Important Notice: Side USB Input 1 is for service use only. Note that this
USB connector does not have any other functions such as playing audio or
picture fi les.
Side USB input 2 is available in analogue TV mode. You can use Media 3.
SERVICE
5Vdc-Max500mA 5Vdc-Max500mA
Browser screen to browse a connected USB disk.
HDMI 34. : HDMI Input.
Headphone jack is used for connecting an external headphone to the system. 5.
Connect to the HEADPHONE jack to listen to the TV from headphones.
Video Input is used for connecting video signals of external devices. Connect 6.
the video cable between the VIDEO IN socket on the TV and the VIDEO OUT
jack on your device.
Audio Inputs are used for connecting audio signals of external devices. 7.
Connect the audio cable between the AUDIO INPUTS on the TV and the
AUDIO OUTPUT jacks on your device. Note: If you connect a device to the
TV via the VIDEO INPUT, you should also connect your device with an audio cable to the AUDIO
INPUTS of the TV to enable audio.
S-Video8. Input is used for connecting an S-VIDEO signal (e.g. from a camcorder or VCR). For using
S-VIDEO input; connect the video cable between the S-VIDEO input on the TV and the S-VIDEO
output on your device. Connect the audio cable between the AUDIO INPUTS (indicated with number 7
in the illustration) on the TV and the audio jacks on your device.
Standby switch is used for turning the TV on or off.9.
Power Connection
IMPORT ANT: The TV set is designed to operate on 220-240V AC, 50 Hz.
• After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the
mains.
• Plug the power cable to the mains socket outlet.
Aerial Connection
• Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV.
LAN
EXT 2
EXT 1
English - 10 -
Using USB Input
•You can connect USB devices to your TV by using
the USB input of the TV. This feature allows you to
display/play JPG and MP3 fi les stored in a USB
stick.
• It is possible that certain types of USB devices (e.g.
MP3 Players) may not be compatible with this TV.
• You may back up your fi les before making any
connections to the TV set in order to avoid any
possible data loss. Note that manufacturer will not
be responsible for any fi le damage or data loss.
• Do not pull out USB module while playing a fi le.
• The TV supports only FAT32 disk formatting. NTFS
format is not supported. If you connect a USB disk
with NTFS format, “usb is unformatted” osd will
be displayed.
CAUTION: Quickly plugging and unplugging
USB devices, is a very hazardous operation.
Especially, do not repeatedly quickly plug
and unplug the drive. This may cause
physical damage to the USB player and
especially the USB device itself.
SIDE VIEW USB MEMORY
Connecting the LCD TV to a PC
For displaying your computer’s screen image on
your LCD TV, you can connect your computer to the
TV set.
• Power off both computer and display before making
any connections.
• Use 15-pin D-sub display cable to connect a PC to
the LCD TV.
• When the connection is made, switch to PC source.
See “Input selection” section.
• Set the resolution that suits your viewing requirements.
Resolution information can be found on
LAN
EXT 2
EXT 1
page 29.
USB Memory Connection
• Plug your USB device to the Side USB input 2 of the
TV. See page 9 to locate Side USB Input 2.
• You must switch to analogue TV mode to access
USB Media Browser screen. Press SOURCE button
on the remote control until TV item is highlighted.
Press OK button to switch analogue TV mode. See
page 25 for more information on Media Browser
screen.
• If the plugged USB disk is not recognised, please
reinsert the disk.
• It is recommended that you connect your USB
device directly to the USB input of the TV. Some
compatibility problems may occur if you use a
separate cable connection.
PC audio cable
(not supplied)
to AUDIO INPUTS
on the TV
Audio
Inputs
PC Input
PC RGB cable
(not supplied)
to PC input
English - 11 -
Loading...