Sanyo CE32LMY1-B Instruction Manual

1
Do not allow anything to rest on the power
cord.
Do not locate this display where the
cord will be damaged by people walking on it.
Do not overload wall outlets and extension cords as this can result in fire or electric shock.
Slots and openings in the cabinet and in the back or bottom are provided for ventilation to ensure reliable operation and to protect it from overheating. These openings must not be blocked or covered. The opening should never be covered with a cloth or other material, and the bottom openings should not be blocked by placing the monitor TV receiver on a bed, sofa, rug, or other similar surface.
Do not place this monitor television near any heat sources such as radiators, heaters, stoves and other heat-generating products (including amplifiers).
Do not place the monitor TV in direct sunlight.
Do not place your monitor TV on an unstable stand, shelf or
table. Serious injury to an individual, and damage to the monitor TV may result if it should fall.
If the monitor TV is built into a unit, or enclosed, the minimum distances for ventilation must be maintained. Heat build up can reduce the life of your monitor TV, and can be dangerous.
This monitor TV should be operated only from the type of power source indicated on the display unit or as indicated in the Operating Instructions. If you are not sure of the type of power supply available , consult your sales person or your local power company.
Never add accessories that have not been specifically designed for this monitor television.
Some internal parts carry hazardous voltages and contact may result in an electric shock hazard.
Never spill liquids of any kind
onto the monitor TV receiver.
Do not place items such as vases
containing liquid on top of the monitor TV.
Do not expose the monitor TV to rain or use near water. For example, near a bathtub, kitchen sink, in a wet basement, etc. Do not use immediately after moving the monitor TV from a low temperature to a high temperature environment, as this causes condensation, which may result in fire, electric shock, or other hazards. Before cleaning, unplug the monitor TV from the wall socket.
Never stand on, lean on or push the monitor TV. Never allow children to play with the monitor TV
Serious injury may result if it should fall.
Do not apply liquid cleaners or aerosol cleaners directly onto the monitor TV receiver. Only use a soft cloth for cleaning.
Do not place candles or hot objects upon the monitor TV, next to it or behind it. Open flames must never be used near the monitor TV set.
SAFETY
SAFETY
PRECAUTIONS
PRECAUTIONS
Installation
CAUTION: Please read and retain for your safety. This monitor TV has been engineered and manufactured to assure your
personal safety, but improper use can result in potential electric shock or fire hazards. In order not to defeat the safeguards
incorporated in this receiver observe the following basic rules for its installation, use and servicing.
Use
CE27LMY1-B CE32LMY1-B
MINIMUM DISTANCES
10cm
10cm
10cm
: Exit
4cm
: Exit
2
SAFETY
SAFETY
PRECAUTIONS
PRECAUTIONS
Important:
This equipment is fitted with an approved non rewireable UK mains plug. To change a fuse in this type of plug proceed as follows:
1. Remove the fuse cover and fuse.
2. Fit a new fuse which should be a BS1362 5Amp A.S.T.A. or BSI approved type.
3. Ensure that the fuse cover is correctly refitted.
If the fuse cover is lost or damaged the plug must
NOT be used but replaced with a serviceable plug.
If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a rating of 5 Amp, ensure the fuse cover is correctly fitted. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp.
Note: The severed plug must be destroyed to avoid a possible shock hazard should it be inserted into a 13Amp socket elsewhere.
The wires in this mains lead are coloured in accordance with the following code:
Blue -------> Neutral Brown ----> Live
1.
The Blue wire must be connected to the terminal which is marked with the letter “N” or coloured BLACK.
2. The Brown wire must be connected to the terminal with the letter “L” or coloured RED.
3. Do not connect either wire to the earth terminal in the symbol or coloured GREEN or GREEN and YELLOW.
Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the wires.
THIS UNIT IS NOT DISCONNECTED FROM THE MAINS UNLESS THE MAINS LEAD IS UNPLUGGED.
Your monitor television is fully transistorised and does not contain any user serviceable components.
You must not remove the rear cover of the monitor TV by your­self. The apparatus is working with high voltages and could damage objects or even endanger people. Leave all required repair and service jobs to an authorised service technician. He will exclusively use such spare parts that are complying with the same safety standards as applicable to the original parts. The use of original spare parts can prevent fire, shock and other hazards.
Unplug the monitor television receiver from the wall outlet and refer servicing to qualified service personnel under the follow­ing conditions:
If the power cord or plug is damaged.
If liquid has been spilt into the monitor
television receiver.
If monitor television receiver has been exposed to rain or water.
If the monitor television receiver has been dropped or the cabinet
has been damaged.
If the monitor television receiver exhibits a distinct change in performance.
If the monitor television receiver does not operate normally by following the operating instructions.
Adjust only those controls that are covered in the operating instructions as improper adjustment of other controls may result in damage. This will often require extensive work by a qualified technician to restore the monitor television receiver to normal operation.
Servicing
Important recycling information.
Your SANYO product is designed and manu­factured with high quality materials and com­ponents which can be recycled and reused.
This symbol means that electrical and elec­tronic equipment, at their end-of-life, should be disposed of separately.
In the European Union there are separate col­lection systems for used electrical and elec­tronic products.
Please help us to conserve the environment we live in!
Note: This symbol mark and recycle system are applied only to EU
countries and are not applied to other countries of the world.
Loading...
+ 2 hidden pages