Sanyo CE27LD5-B, CE32LD5-B Instruction Manual

CE27LD5-B CE32LD5-B

Please read this Instruction book before using your television.

We wish you many hours of pleasure from your new television.

Colour Television

INSTRUCTION MANUAL

END-USER LICENCE & SERVICING

The product (meaning the equipment or appliance to which this documentation relates) incorporates Software (the software applications, utilities and modules embedded within the Product) which is owned by Sanyo or its licensors. Before using the product, please read the End-User Licence Conditions detailed below. If you do not agree to the terms and conditions of the End-User Licence, Please do not proceed to use the Product- repack the Product unused and return it to your supplier together with proof of purchase for a full refund. By using the product, you agree to be bound by the terms and conditions of the End-User Licence.

Licence Grant, Conditions and restrictions

1. Sanyo grants you a non-exclusive, world-wide (subject to export

controls), non-transferable (except as permitted by 2 below), royalty-free licence to use the Software upon and with the Product.

2. You may not transfer any of your licence rights in the Software

without the prior written consent of SANYO and if consent is provided then the Software shall only be transferred in conjunction with the transfer of the Product AND provided that the transferee has read and agreed to accept the terms and conditions of this licence.

3. You must ensure that the copyright, trademark and other protective

notices contained in the Software are maintained and not altered or removed.

4. The Software provided hereunder is copyrighted and licenced (not

sold). SANYO especially does not transfer title or and ownership rights in the Software to you. The Software provided hereunder may contain or be derived from portions of materials provided to SANYO under licence by a third party supplier.

5. Except as expressly permitted by statute you may not;

● use the Software in conjunction with any other computer

hardware other than the product;

● copy all or part of the Software;

● incorporate all (or any of) the Software into other programs

developed by (or on behalf of) you and/or used by you;

● reverse-engineer, decompile or disassemble the Software;

● make the Software (or any part of it) available, or permit its

redistribution, for use with any computer hardware other than the Product; or rent, lease, gift, loan, sell, distribute or transfer possession of the whole or any part of the Software.

Termination

This licence is effective until terminated. This licence will terminate automatically without notice if you fail to comply with any of its provisions.

Disclaimer

1. The Software is(to the extent permitted by law) supplied ‘as is’ and

SANYO and its suppliers expressly exclude all warranties, express or implied, including (but not limited to) warranties of satisfactory quality, fitness for purpose and non-infringement (save to the extent that the same are not capable of exclusion at law).

2. In no circumstances will SANYO be liable for any direct, indirect,

consequential, or incidental damage (including loss of profits, business interruption, loss of data or the cost of procurement of substitute goods, technology or services) arising out of the use or the inability to use the Software (save to the extent that such liability is not capable of exclusion at law).

General

1. This End-User Licence will be governed by laws of England and

the User may only bring claims in the English Courts and SANYO shall be entitled to bring a claim in the courts of any jurisdiction.

2. The above terms and conditions supersede any prior agreement,

oral or written, between you and SANYO relating to the Software.

End-User Licence

Your television is fully transistorised and does not contain any user serviceable components.

You must not remove the rear cover of the TV by yourself. The apparatus is working with high voltages and could damage objects or even endanger people. Leave all required repair and service jobs to an authorised service technician. He will exclusively use such spare parts that are complying with the same safety standards as applicable to the original parts. The use of original spare parts can prevent fire, shock and other hazards.

Unplug the television receiver from the wall outlet and refer servicing to qualified service personnel under the following conditions:

■ If the power cord or plug is damaged.

■ If liquid has been spilt into the television receiver.

■ If television receiver has been exposed to rain or water.

■ If the television receiver has been dropped or the cabinet has been damaged.

■ If the television receiver exhibits a distinct change in performance.

■ If the television receiver does not operate normally by following the operating instructions.

Adjust only those controls that are covered in the operating instructions as improper adjustment of other controls may result in damage. This will often require extensive work by a qualified technician to restore the television receiver to normal operation.

Servicing

Do not allow anything to rest on the power

cord.

Do not locate this television receiver

where the cord will be damaged by people walking on it.

Do not overload wall outlets and extension cords as this can result in fire or electric shock.

Slots and openings in the cabinet and in the back or bottom are provided for ventilation to ensure reliable operation and to protect it from overheating. These openings

must not be blocked or

covered. The opening

should never be covered with a cloth or

other material, and the bottom openings

should not be blocked

by placing the television receiver on a bed, sofa, rug, or other similar surface.

Do not place this television near any heat sources such as radiators, heaters, stoves and other heat-generating products (including amplifiers).

Do not place the television in direct sunlight.

Do not place your television receiver on an unstable stand, shelf

or table. Serious injury to an individual, and damage to the television may result if it should fall. Your sales person can recommend approved stands or shelf and wall mounting instructions. A special wall mounting kit is available for this model.

If the television is built into a unit, or enclosed, the minimum distances for ventilation must be maintained. Heat build up can reduce the life of your television, and can be dangerous.

This television receiver should be operated only from the type of power source indicated on the television or as indicated in the Operating Instructions. If you are not sure of the type of power supply in your home, consult your sales person or your local power company.

Never add accessories that have not been specifically designed for this television.

Do not drop or push objects into the television cabinet slots or openings. Some internal parts carry hazardous voltages and contact may result in an electric shock hazard.

Never spill liquids of

any kind on the television receiver.

Do not place items such as

vases containing liquid on top of the TV set.

Do not expose the television receiver to rain or use near water. For example, near a bathtub, kitchen sink, in a wet basement, etc. Do not use immediately after moving the television from a low temperature to a high temperature environment, as this causes condensation, which may result in fire, electric shock, or other hazards. Before cleaning, unplug the television receiver from the wall socket.

Never stand on, lean on or push the television or its stand.

Never allow

children to play with the television or its stand. Serious injury may result if it should fall.

Do not apply liquid cleaners or aerosol cleaners directly onto the television receiver. Use a damp cloth for cleaning.

Do not place candles or hot objects upon the TV, next to it or behind it. Open flames must never be used near the TV set.

SAFETY

PRECAUTIONS

Installation

CAUTION: Please read and retain for your safety. This unit has been engineered and manufactured to assure your personal safety, but

improper use can result in potential electric shock or fire hazards. In order not to defeat the safeguards incorporated in this receiver observe the following basic rules for its installation, use and servicing.

Use

MINIMUM DISTANCES

5cm

L / S

R / D

10cm

● Cleaning your LCD screen.

Your LCD screen is coated in a non reflective film. Damage to this film will result in possible discolouration. Any scratches will not be repairable.

Clean your screen with a soft cloth, only rub lightly, do not use detergents.

Do not stick anything to the screen, use solvent or alcohol based cleaners, hit the screen with a hard object or rub the surface hard.

● Placement of your LCD TV.

Table top stand

This LCD TV is supplied with a table top stand fitted.

Wall mounting bracket

An optional wall bracket is available for your LCD TV. Before you consider wall mounting this TV, check that you have an appropriate wall made from solid materials such as concrete or bricks. You will have to remove the table top stand to use this.

SAFETY

PRECAUTIONS

Important:

This equipment is fitted with an approved non rewireable UK mains plug. To change a fuse in this type of plug proceed as follows:

1. Remove the fuse cover and fuse.

2. Fit a new fuse which should be a BS1362 5Amp A.S.T.A. or BSI approved type.

3. Ensure that the fuse cover is correctly refitted.

If the fuse cover is lost or damaged the plug must NOT be used but replaced with a serviceable plug. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a rating of 5 Amp, ensure the fuse cover is correctly fitted. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp.

Note: The severed plug must be destroyed to avoid a possible shock hazard should it be inserted into a 13Amp socket elsewhere.

The wires in this mains lead are coloured in accordance with the following code:

Blue -------> Neutral Brown ----> Live

1. The Blue wire must be connected to the terminal which is marked with the letter “N” or coloured BLACK.

2. The Brown wire must be connected to the terminal with the letter “L” or coloured RED.

3. Do not connect either wire to the earth terminal in the symbol or coloured GREEN or GREEN and YELLOW.

Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the wires.

THIS UNIT IS NOT DISCONNECTED FROM THE MAINS UNLESS THE MAINS LEAD IS UNPLUGGED.

Care of your product

Important recycling information.

Your SANYO product is designed and manufactured with high quality materials and components which can be recycled and reused.

This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of separately from your household waste.

Please dispose of this equipment at your

local community waste collection/recycling centre.

In the European Union there are separate collection systems for used electrical and electronic products.

Please help us to conserve the environment we live in!

Note: This symbol mark and recycle system are applied only to

EU countries and are not applied to other countries of the world.

1. Connect your aerial cable socket to the back of the TV set. Fit the

aerial cable as shown or as shown below when AV equipment is connected.

● Connecting DVD / VCR player/ Satellite receiver or

Set top box.

We recommend that you connect all other equipment before Plug and Play. The following examples are our recommended standard connection.

For further information please consult your local dealer.

2. Connect the power cord of the LCD TV to a wall outlet.

✐ As this product does not have a mains On/Off switch, please

ensure your mains plug is easily accessible.

✐ The TV set is prepared for a mains voltage AC220~240V, 50Hz. To

disconnect completely from the mains or, when the TV set is not to be used for an extended period of time, it is advisable to disconnect the power cord from the power outlet.

✐ For all aerial problems please consult your local dealer.

■ HDMI (High Definition Multimedia Interface)

This TV set has an HDMI connector. When connected to the HDMI source and HDMI is selected using the remote control,There is a short time period before the picture appears at a much higher resolution. This connection is located at the back of the TV set next to the aerial socket.

✐ When connecting to the HDMI socket, please make sure the

straight edge is facing away from the rear of the set.

If you want to connect a DVD player with a DVI adaptor connection cable,please ensure the sound is connected to L/S andR/D connections. Refer to diagram below.

DVI-I Format will only work carrying a Digital signal.

1. PC connection

This TV set has a PC connector. You can connect a PC to the LCD TV and use it as a monitor if required. This connection is located at the back of the TV set near the scart sockets.

2. Y,Pb,Pr connection

This TV set has Y, Pb, Pr. You can connect your DVD player to these terminals instead of using a scart lead. This can support high definition in analogue component form.

Install two "AAA" 1.5 volt batteries so that the "+" and "-" marks on the batteries match the "+" and "-" marks inside the unit into the remote control handset.

INST

ALLA

TION

Step : 1 Connections ( Essential)

AV1

AV2

AV3

L/S

R/D

WARNING! High voltages are used in the operation of

this set. Refer service to qualified service personnel.

Step : 2 Remote control battery installation

Front

Back

LCD TV

R/D

L/S

AV2

AV3

AV1

DISH IN

OUT

VCR

Set top box or Satellite

VCR

For satellite only

DVD

AC Mains Outlet

L/S

R/D

AV2

AV3

AV1

The LCD TV will have a red Standby light to show there is power.

The following screen will appear before Plug and Play will start.

Using your remote control, press the eor dbutton to highlight the Country option. Select UK using the 7or 8button. Press the eor

button to highlight the OSD Language option. Select English

using the 7or 8button. Press the eor dbutton to highlight the Start option and press the 8button to begin the self-automatic tuning system called Plug and Play.

The TV scans the analogue channels first and then switches to digital channel mode and scans digital channels. This could take up to 15 minutes. During automatic tuning, the TV displays the tuning status of analogue and digital channel tuning on the screen.

Press OK(on remote control only) to save.

Press OK(on remote control only) to Watch TV.

Now the installation is complete!

After Plug & Play, Digital channels are stored in the programme positions shown in the All channel table. Analogue channels will be automatically sorted as follows:

Programme position 1 : BBC1 Programme position 2 : BBC2 Programme position 3 : ITV Programme position 4 : CH4 or S4C Programme position 5 : CH5 Programme position 6 : ITV2 Programme position 7 : channels in order found.

✐

If any other channels are available in your reception area, the remaining channels will be stored from programme position 7 in sequence as found.

✐

If you move to another city or cable is installed, please follow the description “Channel List - scan for channels”. (on page 11) or “Preset Menu” (on page 16) for Analogue channels.

✐

This procedure only appears the first time you switch on.

1. Front of

LCD TV

Press the 5 or 6 button to increase or decrease the programme position.

Press the 1 or 2 button to increase or decrease the sound volume.

3. Left side terminals

✐

To select the AV4 mode press the v button repeatedly.

✐

When the headphones are inserted the sound from the TV speakers is muted.

3.5 mm Mini Headphone din

AV4 Video in

AV4 Left Audio in

AV4 Right Audio in

Step : 3 Switching on / Plug & Play

Thank you for purchasing your SANYO TV. Now I am searching and storing all programmes. Please wait.

Channels found  

The scan will take approximately 3 minutes

In progress

RET

Stop

Scan for channels

Terminals

INST

ALLA

TION

Standby switch

Standby Power indicator.

Country UK

Frequency 000.00

Auto Tuning

: Select

: Set

Menu : Exit

Start OK? or Running

OSD Language English

Scan for channels Channels found   

Done

Save

All channels

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 

Watch TV

BBC ONE BBC TWO ITV 1 Channel 4 five ITV 2 BBC THREE Teletext BBC FOUR Sky Travel UK History Ch 14 CH 15 QVC TV Travel Shop 

RET

Cancel

L/S

R/D

Screen mode selector

REMOTE CONTROL

- Digital Use

To select the screen mode, Auto, Natural, Zoom14:9, Title In 14:9, Zoom 16:9, Title In 16:9, Full or Normal.

Sound mute

To switch the sound from the speakers. The sound changes as follows;

Normal volume -> Half volume -> Mute

Standby/Power on/off

To switch the TV on and off. Also see page 19.

DS button

To switch directly to HDMI.

TV/AV switch

To switch from Digital TV, AV1, AV2, AV3, AV4 YPrPb, PC, HDMI or TV mode press repeatedly.

Direct programme selector

For direct access to programmes using (0-9) numeric buttons for example for channel 23, press 2 and 3 numeric

buttons.

To switch on the screen display menu on/off. See page 8.

Cursors

To select the sub menu items in the menu display, Up, Down, Left, Right.

Guide

To call up the Digital TV schedule guide display on the screen. (refer to page 13).

Surround mode selector

To select the surround mode, On or Off.

D/A selector

To switch between analogue (TV) and digital channels (DTV).

System selector

To select the colour system in the AV mode, Auto, PAL, NTSC or SECAM.

Programme up and down

To select the next programme number or previous programme number.

N/A

Coloured buttons

Some channels have interactive services. Use the red button to enter and other colours as directed. Also used in menu functions

Return

Returns back to previous screen in menu. Exits interactive mode.

Volume up/down

To adjust the sound level.

INFO

Shows the current and next programme on the selected channel. (refer to page 13).

Subtitle

Displays sub titles On and Off. You may need to switch to title in by pressing WIDE button. See page 20.

To save the setting in the menu, or to call up the All channel table.

Picture mode selector

To access a series of picture modes: Personal, Dynamic, and Standard.

Bass selection

To get an emphasised bass sound, On or Off.

The main menu screen takes you to many functions in the TV. The buttons below are the main buttons and their uses.

MENU button - Enters and exits menus.

Button eand dmoves up and

down in each selected menu.

Button 7changes levels, moves to

the left and returns to previous menu.

Button8changes levels, moves to the right and enters next menu.

RETURN button - Returns to the previous screen.

1. Press the MENU button. Select Picture using the e or d button.

Press the 8 button to enter.Set the picture settings for your personal preference.

Use the

e or d button to select eg. Brightness, Contrast etc. and the

7 or 8 button to adjust levels.

Use the e or d button to select and the 7 or 8 button to set.

These settings are memorised when you exit the menu.

To exit press the MENU button.

Refer to the bottom of the screen for added help for which buttons to use.

Press the MENU button and select Sound menu by pressing the e or d button. Press the 8 button to enter.

Select and adjust to obtain the best sound settings for your environment using the

e or d and 7 or 8 buttons.

To exit press the

MENU button. These settings automatically store

when you exit the menu.

You can set up different user lists to allow quick access to your favourite channels.

■ Setting User Lists

1. Press the MENU button to select

main menu.

2. Select User Lists by pressing the

button.

3. Select Your TV lists menu by

pressing the 8button.

4. Select a List eg. List 1 by pressing

the eor dbutton. Enter by pressing the 8button.

5. Press the8to add channels to

your list. Use theeor dto highlight channel selection. Press the OK button to add to your list, a X will appear next to the channel.

6. Repeat to add all the channels

you want in your list.

7. Press the Blue button to save

selection.

8. Add more channels, move

selection, rename list, remove or swap or press the

OK button to

finish the list or the MENU button to exit.

■ Move selection.

To change the order of channels in your list.

1. Select the channel you wish to

move using the eor dbutton.

2. Press the Green button to select the channel.

3. Use the eor dbutton to move to a different position

4. Press the Green button to save the new order.

Repeat steps 1-4 until all channels are in the order you need.

5. Add more channels, move selection, rename list, remove or swap or press the OK button to finish the list or the MENU button to exit.

■ Rename List.

1. Press Blue button to rename your list. see picture.

2. Use the 7or 8button to move left or right.

3. Use the eor dbutton to choose a letter, symbol or number. (A-Z,

0-9, -,+ etc.)

4. Press the OK button to save new user list name.

5. Add more channels, move selection, rename list, remove or swap

or press the

OK button to finish the list or MENU button to exit.

DIGIT

OPERA

TION

Picture menu

Sound menu

User Lists

Main menu

Main Menu

Picture Sound User lists Parental lock Configuration Channel list Technical information Timer recording Off Timer TV settings

Picture

Brightness 41 Contrast 50 Colour 32 Sharpness 3 Picture Personal / Dynamic / Standard Text Brightness

: Select

Minimum / Centre / Maximum

: Adjust

Menu : Exit

Your TV lists

List 1

List 1 List 1 List 1 List 1 List 1 List 1 List 1

List 1

Free slot

Add channels

Move selection

Rename list

List 1 All channels

BBC ONE

Free

Select Save

BBC ONE

Free

1 2 3 4 5 6 7 8 9 10 11 12

R Y

BBC ONE X

BBC TWO

ITV 1

Channel 4

five

ITV 2

BBC THREE

Teletext

BBC FOUR

Sky Travel

UKHistory

Ch 14

CH 15

List 1

1 2 3 4 5 6 7 8 9

Put here

Remove Swap Save

BBC ONE BBC TWO ITV 1 Channel 4 five ITV 2 BBC THREE BBC FOUR UKHistory

Sound

Volume Balance Bass Treble Sound Preset Music / Talk / Normal / Personal 3D Surround Off / Active Auto Volume Off / On

: Select

: Adjust

Menu : Exit

Rename list

RET

SaveChoose letter

Cancel

+ 16 hidden pages