Sanyo CE22LD90N-B Instruction Manual

INSTRUCTION MANUAL

Colour television

CE22LD90N-B

1 - 31

ENGLISH

Please read this Instruction book before using your television. We wish you many hours of pleasure from your new television.

Problems with set-up?

Call 0844 335 2230

Contents

Accessories ............................................................ 2

Features ................................................................. 2

Introduction ............................................................. 2

Preparation ............................................................. 2

Safety Precautions .................................................2

Power Source ..................................................... 2

Power Cord ......................................................... 2

Moisture and Water ............................................2

Cleaning..............................................................3

Heat and Flames ................................................3

Lightning ............................................................. 3

Replacement Parts ............................................. 3

Servicing ............................................................. 3

Waste Disposal ................................................... 3

FOR EU USERS ................................................. 3

Disconnecting the Device ................................... 3

Headphone Volume ............................................ 3

Installation...........................................................3

LCD Screen ........................................................ 3

Warning ..............................................................3

Overview of the Remote Control ............................4

LCD TV and Operating Buttons .............................. 5

Viewing the Connections- Back Connectors ..........5

Viewing the Connections - Side Connectors .......... 6

Power Connection .................................................. 6

Aerial Connection ................................................... 6

Using Side USB Input ............................................. 7

USB Memory Connection ................................... 7

Connecting the LCD TV to a PC .............................7

Connecting to a DVD Player................................... 8

Using Side AV Connectors .....................................8

Connecting Other Equipment via Scart .................. 8

Inserting Batteries into the Remote

Control Handset...................................................... 9

Switching the TV On/Off ......................................... 9

To Switch the TV On ........................................... 9

To Switch the TV Off ........................................... 9

Input Selection ........................................................ 9

Basic Operations .................................................... 9

Operation with the Buttons on the TV .................9

Initial Settings ....................................................... 10

General Operation ................................................ 10

Electronic Programme Guide (EPG) .....................11

Displaying Subtitles ...........................................11

Digital Teletext (** for UK only) ..........................11

Analogue Teletext ..............................................11

Widescreen ........................................................11

IDTV Menu System ..............................................12

Channel List ...................................................... 12

Timers ...............................................................13

Conditional Access ...........................................14

TV Setup ........................................................... 14

Setup ................................................................ 14

Media Browser .................................................. 18

Playing MP3 Files ............................................. 18

Viewing JPG Files .............................................18

English - 1 -

Slideshow Options ............................................ 18

Video Playback ................................................. 19

Analogue TV Menu System .................................. 19

Picture Menu.....................................................19

Sound Menu .....................................................20

Feature Menu ...................................................21

Install Menu ......................................................22

Source Menu ....................................................23

PC Mode Menu System........................................ 23

PC Position Menu ............................................. 23

Displaying TV Information .................................... 24

Mute Function ....................................................... 24

Picture Mode Selection......................................... 24

Freezing Picture ...................................................24

Zoom Modes......................................................... 24

Auto .................................................................. 24

16:9 ................................................................... 24

4:3 ..................................................................... 25

Panoramic.........................................................25

14:9 ................................................................... 25

Cinema ............................................................. 25

Subtitle .............................................................. 25

Zoom.................................................................25

T eletext ................................................................. 25

Tips .......................................................................26

Image Persistence ............................................ 26

No Power .......................................................... 26

Poor Picture ...................................................... 26

No Picture ......................................................... 26

Sound ............................................................... 26

Remote Control.................................................26

Input Sources....................................................26

Appendix A: PC Input Typical Display Modes .......27

Appendix B: AV and HDMI Signal Compatibility

(Input Signal Types) .............................................. 28

Appendix C: Supported File Formats for

USB Mode ............................................................ 29

Speciﬁ cations .......................................................30

Important Instruction ............................................. 31

Accessories

SELECT

INFO/

ABC

DEF GHI

JKL

MNO

PQR

VWX

STU

RETURN

PRESETS

P+

P-

SOURCE

DTV

SWAP

FAV

SLEEP

SUBTITLE

LANG

SCREEN

EPG

Instruction Book

Batteries: 2 X AAA

Remote

Controller

Features

• Remote controlled colour LCD TV.

• Fully integrated digital TV (DVB-T).

• HDMI connectors for digital video and audio. This connection is also designed to accept high deﬁ nition signals.

• USB input.

•

200 programmes from VHF, UHF(analogue).

• 500 programmes for digital mode (IDTV).

• OSD menu system.

• Scart socket for external devices (such as video, video games, audio set, etc.).

• Stereo sound syste

• Teletext, fastext, TOP text.

• Headphone connection.

• Automatic programming system.

• Forward or backward manual tuning.

• Sleep timer.

• Child lock.

• Automatic sound mute when no transmission.

• NTSC playback.

• AVL (Automatic Volume Limiting).

• When no valid signal is detected, after 5 minutes the TV switches automatically to standby mode.

• PLL (Frequency Search).

• PC input.

• Plug&Play for Windows 98,ME,2000,XP, V ista.

• Game Mode .

Introduction

Thank you for choosing this product. This manual will guide you for the proper operation of your TV. Before operating the TV, please read this manual thoroughly.

Please do keep this manual in a safe place for future references.

Preparation

For ventilation, leave a free space of at least 10 cm all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set.

Use this device in moderate climates.

10 cm

Safety Precautions

Please read the following recommended safety precautions carefully for your safety.

Power Source

The TV set should be operated only from a 220-240 V AC, 50 Hz outlet. Ensure that you select the correct voltage setting for your convenience.

Power Cord

Do not place the set, a piece of furniture, etc. on the power cord (mains lead) or pinch the cord. Handle the power cord by the plug. Do not unplug the appliance by pulling from the power cord and never touch the power cord with wet hands as this could cause a short circuit or electric shock. Never make a knot in the cord or tie it with other cords. The power cords should be placed in such a way that they are not likely to be stepped on. A damaged power cord can cause ﬁ re or give you an electric shock. When it is damaged and needs to be replaced, it should be done by qualiﬁ ed personnel.

Moisture and Water

Do not use this device in a humid and damp place (avoid the bathroom, the sink in the kitchen, and near the washing machine). Do not expose this device to rain or water, as this may be dangerous and do not place objects ﬁ lled with liquids, such as ﬂ ower vases, on top. Avoid from dripping or splashing.

If any solid object or liquid falls into the cabinet, unplug the TV and have it checked by qualiﬁ ed personnel before operating it any further.

English - 2 -

Cleaning

Before cleaning, unplug the TV set from the wall outlet. Do not use liquid or aerosol cleaners. Use soft and dry cloth.

Ventilation

The slots and openings on the TV set are intended for ventilation and to ensure reliable operation. T o prevent overheating, these openings must not be blocked or covered in anyway.

Heat and Flames

The set should not be placed near to open ﬂ ames and sources of intense heat such as an electric heater. Ensure that no open ﬂ ame sources, such as lighted candles, are placed on top of the TV. Batteries should not be exposed to excessive heat such as sunshine, ﬁ re or the like.

Lightning

In case of storm and lightning or when going on holiday, disconnect the power cord from the wall outlet.

Replacement Parts

When replacement parts are required, make sure that the service technician has used replacement parts, which are speciﬁ ed by the manufacturer or have the same speciﬁ cations as the original one. Unauthorized substitutions may result in ﬁ re, electrical shock or other hazards.

Servicing

Please refer all servicing to qualified personnel. Do not remove the cover yourself as this may result in an electric shock.

Waste Disposal

Instructions for waste disposal:

• Packaging and packaging aids are recyclable and

should principally be recycled. Packaging materials, such as foil bag, must be kept away from children.

• Batteries, including those which are heavy metal-

free, should not be disposed of with household waste. Please dispose of used battery in an environment friendly manner. Find out about the legal regulations which apply in your area.

• Cold cathode fluorescent lamp in LCD PANEL

contains a small amount of mercury; please follow the local laws or regulations for disposal.

FOR EU USERS

The symbol mark and recycling systems described below apply to EU countries and do not apply to countries in other areas of the world.

English - 3 -

Your SANYO product is designed and manufactured with high quality materials and components which can be recycled and/or reused.

The symbol mark means that electrical and electronic equipment, batteries and accumulators, at their endof-life, should be disposed of separately from your household waste.

Note: If a chemical symbol is printed beneath the symbol

mark, this chemical symbol means that the battery or accumulator contains a heavy metal at a certain concentration. This will be indicated as follows: Hg: mercury, Cd: cadmium, Pb: lead

In the European Union there are separate collection systems for used electrical and electronic equipment, batteries and accumulators.

Please, dispose of them correctly at your local community waste collection/recycling centre.

Please, help us to conserve the environment we live in!

Disconnecting the Device

The mains plug is used to disconnect TV set from the mains and therefore it must remain readily operable.

Headphone Volume

Excessive sound pressure from earphones and headphones can cause hearing loss.

Installation

To prevent injury, this device must be securely attached to the wall in accordance with the installation instructions when mounted to the wall (if the option is available).

LCD Screen

The LCD panel is a very high technology product with about a million thin ﬁ lm transistors, giving you ﬁ ne picture details. Occasionally, a few non-active pixels may appear on the screen as a ﬁ xed blue, green or red point. Please note that this does not affect the performance of your product.

Warning

Do not leave your TV in standby or operating mode when you leave your house.

Overview of the Remote Control

Standby1. Cursor up / Page up (in TXT mode)2. Cursor right / Subpage (in TXT mode)3. Info / Reveal (in TXT mode)4. Numeric buttons5. Return / Exit (in DTV mode) / Index page 6.

(in TXT mode) Programme up / Page down (in DTV 7.

mode) Volume up8. Favourite mode (in DTV mode)9. AV / Source selection10. Yellow / Feature menu / Current language 11.

(*)(in DTV mode) Blue / Install menu / Favourite mode (*) (in 12.

DTV mode) Subtitle on-off / TXT subtitle13. Sleep timer14. No function15. Guide (in DTV mode)16. Update (in TXT mode)17. Teletext / Mix / Pat18. Image size / Expand (in TXT mode)19. Mono-Stereo / Dual I-II / Current language 20.

(in DTV mode) (*) Red / Sound menu / Channel list (in DTV 21.

mode) Green / Picture menu / Subtitle on-off (in 22.

DTV mode) (*) Previous Programme / Swap23. TV – Digital TV mode24. Programme down / Page up (in DTV 25.

mode) Volume down26. Picture mode selection27. Menu on-off28. Cursor down / Page down (in TXT mode)29. Cursor left 30. OK / Select / Freeze picture / Hold (in TXT 31.

mode) Mute32.

ABC

JKL

STU

SELECT

DEF GHI

MNO

VWX

PRESETS

P+

P-

23 22

SWAP

DTV

FAV

20 19 18

SCREEN

LANG

SUBTITLE

EPG

(*) Only for EU country options.

RETURN

INFO /

PQR

SOURCE

SLEEP

2 3

12 13 14

English - 4 -

LCD TV and Operating Buttons

FRONT and REAR VIEW SIDE VIEW Control Buttons

Up button1. Down button2. Programme/Volume / AV 3.

selection button Standby button4.

Note:You can use “+/-” buttons to change volume. If you want to change channels, press P/V/AV button once and then use “+/-” buttons. If you hold the P/V/AV button about a few seconds, source OSD will be displayed. Main menu OSD cannot be displayed via control buttons.

Note2: In source menu, + button functions as cursor down, - button functions as cursor up.

Viewing the Connections- Back Connectors

SCART socket inputs or outputs for external devices.1. Connect the SCART cable between SCART socket on TV and SCART socket on your external device (such as a decoder, a VCR or a DVD player).

Note: If an external device is connected via the SCART socket, the TV will automatically switch to AV mode.

PC Input is for connecting a personal computer to the TV set. 2. Connect the PC cable between the PC INPUT on the TV and the PC output on your PC. Component Video Inputs (YPbPr) are used for connecting component video. You can use PC input to enable YPbPr signal sonnection with a device that has component output. Connect the YPbPr to PC cable between the PC INPUT on the TV and the component video outputs of your device. (YPbPr cable is not supplied)

HDMI3. : HDMI input HDMI Input is for connecting a device that has an HDMI socket. Your LCD Television is capable of displaying High Deﬁ nition pictures from devices such as a High Deﬁ nition Satellite Receiver or DVD Player. These devices must be connected via the HDMI sockets or Component Socket. These sockets can accept either 480i, 480p, 576p, 576i, 720p, 1080i, 1080p signals. No sound connection is needed for an HDMI to HDMI connection.

RF Input connects to an antenna or a cable.4. Note that if you use a decoder or a media recorder, you should connect the aerial cable through the device to the television with an appropriate antenna cable, as shown in the illustration in the following pages.

HDMI

When you use the wall mount kit (optional) with the LCD TV, we would deﬁ nitely recommend to plug all your cables into the back of the LCD before mounting to the wall.

English - 5 -

Viewing the Connections - Side Connectors

CI Slot is used for inserting a CI card. A CI card allows you to view all the 1. channels that you subscribe to. For more information, see “Conditional Access” section.

USB Input (functional in DTV mode only).2.

Video Input is used for connecting video signals of external devices.Connect 3. the video cable between the VIDEO IN socket on the TV and the VIDEO OUT jack on your device.

Audio Inputs are used for connecting audio signals of external devices. 4. Connect the audio cable between the AUDIO INPUTS on the TV and the AUDIO OUTPUT jacks on your device. Also to enable PC/YPbPr sound connection in such a case, use an appropriate audio cable between the connected device’s audio outputs and the TV’s audio inputs Note: If you connect a device to the TV via the VIDEO or PC/YPbPr cable (YPbPr cable is not supplied) you should also connect your device with an audio cable to the AUDIO INPUTS of the TV to enable audio.

Headphone jack is used for connecting an external headphone to the system. 5. Connect to the HEADPHONE jack to listen to the TV from headphones.

Power Connection

IMPORTANT : The TV set is designed to operate on 220-240V AC, 50 Hz.

• After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains.

• Plug the power cable to the mains socket outlet.

Aerial Connection

• Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV.

HDMI

English - 6 -

Using Side USB Input

• You can connect USB devices to your TV by using

the USB input of the TV. This feature allows you to display/play music,photo or video ﬁ les stored in a USB stick.

• It is possible that certain types of USB devices (e.g.

MP3 Players) may not be compatible with this TV.

• You may back up your ﬁ les before making any

connections to the TV set in order to avoid any possible data loss. Note that manufacturer will not be responsible for any ﬁ le damage or data loss.

• The TV supports only FAT32 disk formatting. NTFS

format is not supported. If you connect a USB disk with NTFS format, “usb is unformatted” osd will be displayed.

• Do not pull out USB module while playing a ﬁ le.

CAUTION: Quickly plugging and unplugging USB devices, is a very hazardous operation. Especially, do not repeatedly quickly plug and unplug the drive. This may cause physical damage to the USB player and especially the USB device

itself .

SIDE VIEW USB MEMORY

USB Memory Connection

• Plug your USB device to the USB input of the TV.

Note: USB hard disk drives are not supported.

Connecting the LCD TV to a PC

For displaying your computer ’s screen image on your LCD TV, you can connect your computer to the TV set.

• Power off both computer and display before making any connections.

• Use 15-pin D-sub display cable to connect a PC to the LCD TV.Use an audio cable between audio inputs of the TV (side) and audio output of your PC to enable sound connection.

• When the connection is made, switch to PC source. See “Input selection” section.

• Set the resolution that suits your viewing requirements. Resolution information can be found in the appendix

parts.

HDMI

PC audio cable

(not supplied)

to AUDIO INPUTS

on the TV

Audio Inputs

PC Input

PC RGB cable (not supplied) to PC input

English - 7 -

Connecting to a DVD Player

If you want to connect a DVD player to your LCD TV, you can use connectors of the TV set. DVD players may have different connectors. Please refer to your DVD player’s instruction book for additional information. Power off both the TV and the device before making any connections.

Note: Cables shown in the illustration are not supplied.

• If your DVD player has an HDMI socket, you can connect via HDMI. When you connect to DVD player as illustrated below, switch to HDMI source. See, “Input Selection” section.

• Most DVD players are connected through COMPONENT SOCKETS. when you connect a device that has a YPbPr output through the PC input with YPbPr to PC cable. To enable sound connection, use AUDIO IN located side of the TV (YPbPr cable is not supplied).

. When the connection is made, switch to YPbPr

source. See, “Input selection” section.

• You may also connect through the SCART socket. Use a SCART cable as shown below.

Component

Scart socket

video

inputs

YPbPr can be use only

Component

audio inputs

HDMI

input

Using Side AV Connectors

You can connect a range of optional equipment to your LCD TV. Possible connections are shown below. Note that cables shown in the illustration are not supplied.

• For connecting a camcorder, connect to the VIDEO IN socket and the AUDIO SOCKETS. For selecting the related source, see the section “Input selection” in the following parts.

• To listen the TV sound from headphones, connect to the HEADPHONE jack of theTV

Camcorder

Headphone

Connecting Other Equipment via Scart

Most devices support SCART connection. You can connect a; DVD recorder, a VCR or a decoder to your LCD TV by using the SCART socket. Note that cables shown in the illustration are not supplied. Power off both the TV and the devices before making any connections.

For more information, refer to your device’s own instruction book.

DVD Player

Note : These methods of connection perform the same function but in different levels of quality. It is not necessary

to connect by all three methods.

English - 8 -

DVD Recorder

Scart socket

Video Recorder

Decoder

Inserting Batteries into the Remote Control Handset

• Remove the battery cover located on the back of the handset by gently pulling backwards from the indicated part.

• Insert two AAA/R3 or equivalent type batteries inside. Place the batteries in the right directions and replace the battery cover.

Note : Remove the battery from remote control handset when it is not to be used for a long period. Otherwise it can be

damaged due to any leakage of batteries.

Switching the TV On/Off

To Switch the TV On

• Connect the power cord to the 220-240V AC , 50 Hz. Then the standby LED lights up.

• To switch on the TV from standby mode either:

• Press the “ on the remote control.

• Press the “ the TV. The TV will then switch on.

Note : If you switch on your TV via PROGRAMME UP/DOWN buttons on the remote control or on the TV set, the programme that you were watching last will be reselected.

By either method the TV will switch on.

To Switch the TV Off

• Press the “ ” button on the remote control or press the “

standby mode.

• To power down the TV completely, unplug the power cord from the mains socket.

Note: When the TV is switched to standby mode, standby LED can blink to indicate that features such as Standby Search, Over Air Download or Timer is active.

” button, P+ / P- or a numeric button

” button, -P/CH or P/CH+ button on

” switch on the TV, so the TV will switch to

English - 9 -

Input Selection

Once you have connected external systems to your TV, you can switch to different input sources.

• Press SOURCE button on your remote control for directly changing sources.

• Select “Source” option from the main menu by using “ “ ” button to highlight an input and press “ ” button to select.

Note : You can mark desired source options by pressing the OK button. Therefore, when

only the marked source options will be available (except for the TV source).

” or “ ” button. Use then “ ” or

SOURCE button is pressed,

Note : YPbPr mode can be use only when you connect a device that has a YPbPr output through the PC input with YPbPr to PC cable (YPbPr cable is not supplied).

Basic Operations

You can operate your TV using both the remote control and onset buttons.

Operation with the Buttons on the TV

Main menu OSD cannot be displayed via control buttons. “+/-” buttons will function as volume up/down as default. Even if you set other functions for these buttons, “+/-” buttons will perform as default after a short while.

Volume Setting

• Press “P/V/AV ” button once and then use “+/-” buttons to increase or decrease volume, so a volume level scale (slider) will be displayed on the screen.

Programme Selection

• Press “+/-” to select the next or previous programme.

AV Mode

• Hold the “P/V/AV ” button, source OSD will be displayed.

Operation with the Remote Control

• The remote control of your TV is designed to control all the functions of the model you selected. The functions will be described in accordance with the menu system of your TV.

+ 23 hidden pages