Sanus VM100200 User Manual

Assembly Instructions for Vision Mount™ VM100/200 Adapter

Parts:

1VM100/200 Adapter - a

4M5 Flat Head Machine Screws - b

4Nuts - c

6M4 x 10mm Phillips Pan Head Machine Screws (not shown) - For use with televisions not compatible with the wall mounts supplied hardware.

VM1Assembly:

1] Attach the VM100/200 Adapter to the four outer holes on the star shaped Monitor Mount using the M5 Flat Head Machine Screws (b) and the Nuts (c) as shown in diagram 1.

NOTE:MakesuretheM5FlatHeadMachineScrews(b)sitinsidethecountersunkholesontheVM100/200 Adapter (a) so the head of the screw is flush with the flat side of the plate and that the nuts are very tight.

2] Attach the television to the adapter and follow the instructions provided with your LCD wall mount.

VMFAssembly:

1]Attach the VM100/200Adapter (a) to the four outer holes on the VMF Monitor Mount using the M5 Flat Head Machine Screws (b) and the Nuts (c) as shown in diagram 2.

NOTE:MakesuretheM5FlatHeadMachineScrews(b)sitinsidethecountersunkholesontheVM100/200 Adapter (a) so the head of the screw is flush with the flat side of the plate and that the nuts are very tight.

3] Attach the television to the adapter and follow the instructions provided with your LCD wall mount.

b	c	Diagram 1
	a

b	c	Diagram 2
	a

Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113	062404
800.359.5520 www.sanus.com