Sansui SMX5819USM User Manual

User Manual

58

” LED SMART U

HD TV

SMX5819USM

147.32cm

THE OPERATION OF THIS EQUIPMENT IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:

1) IT IS POSSIBLE THAT THIS DEVICE OR DEVICE WILL NOT CAUSE HARMFUL INTERFERENCE AND

2) THIS EQUIPMENT MUST ACCEPT ANY INTERFERENCE INCLUDING THE ONE THAT CAN CAUSE

YOUR OPERATION NOT DESIRED.

BEFORE USING THIS PRODUCT READ THE INSTRUCTION AND CONSERVE FOR FUTURE REFERENCE,

IF THE POWER CORD BECOMES A TOTAL OR PARTIAL DAMAGE, DO NOT TRY TO REPAIR IT

GO TO THE SERVICE CENTER MARKED IN YOUR GUARANTEE; WITH A SPECIALIST TECHNICIAN,

OR, WITH YOUR MANUFACTURER..

IMPORTED BY:

CTM DIGITAL S.A. de C.V.

Av. Lago Zurich No. 219, 12th floor, Plaza Carso Building, Col. Amplicon Granada, 11529
Mexico, Mexico City. Tel. [phone]

ELECTRICAL SPECIFICATIONS: 100-240 See 50/60 Hz 70W
THE REMOTE CONTROL USES 2 "AAA" TYPE BATTERIES OF 1.5 V DC each (3 Vcc)

1

Safety information

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

High voltages are used in the
operation of this product, to
avoid the risk of electric shock,
do not remove the back cover
of the TV. Please go to the
qualified personnel for service.

The use of controls, adjustments or carrying out procedures
other than those specified here, may cause dangerous
radiation levels.

The exclamation symbol within the
equilateral triangle is used to prevent the
user from the presence of important points
that must be observed in the operation and
maintenance of this product.

Caution
The lightning symbol enclosed in an
equilateral triangle is used to warn the user
about the presence of non-isolated "high
voltage" parts, sufficient to be considered a
danger factor by electric shock or
electrocution.

2

Important security

1. Read these instructions.

.

2. Keep this instruction manual.

3. Follow all warnings.

4. Follow all instructions.

5. Do not use this equipment near water.

6. Clean only with soft and dry cloth.

7. Do not block the ventilation slots. Install according to the manufacturer's
instructions.

8. Do not install the equipment near sources that emit heat, such as radiators, stoves,
stoves, or other appliances (including amplifiers) that emit heat.

9. Do not try to avoid the purpose of the polarized plug. This TV is equipped with a
polarized plug (one blade wider than the other). This plug must fit correctly in the
outlet. This is a safety feature.
If it is not possible to fully insert the plug, try inverting it. If this is still not possible,
consult an electrician to replace the plug with an appropriate one.

10. Protect the power cord from being stepped on or being bent, particularly at the
plug and at the part where it joins the equipment.

11. Use only the accessories specified by the manufacturer. 12. Use only furniture or
shelves recommended by the manufacturer or sold together with the equipment.
When an unstable piece of furniture or shelf is used, be very careful, the equipment
may fall and cause personal injury.

13. Disconnect the equipment during lightning storms or when it is not used for a long
time.

14. Refer all service to qualified personnel only. Service is required when the
appliance has been damaged in some way, if the power cord or plug is damaged,
liquid has been spilled or objects have fallen into the appliance, been exposed to rain
or moisture, does not operate normally, or has fallen.

15. The equipment must be disconnected from the main socket and place the On /
Standby switch in the Standby position and disconnect the power cord of the
appliance from the AC receiver.

16. The contact must be installed near the equipment and must have easy access.

17. This equipment should be placed in an environment where ventilation is not good,
such as a bookshelf or enclosed space, unless good ventilation is provided.

18. Do not expose the device to dripping or splashing liquids.

19. Do not place any source of danger on the device (e.g. objects filled with liquids,
candles).

20. Wall or ceiling mounting - The appliance must be installed on the wall or sky only
as recommended by the manufacturer.

21. Never place the TV, remote control or batteries near flames or other sources of
heat, including direct sunlight. To prevent the spread of fire, keep candles or other
flames removed from the TV, remote control and batteries all the time.

22. The USB terminal must be charged with 0.5 A under normal operation.

3

LED Television

147.32 40

cm x40cm M6*L10 4

Important security instructions

D

Installing the TV on the wall

1. First, put the TV on a flat table, on which you must put something soft to prevent the panel
from being scratched or damaged.

2. Use the screwdriver to remove the 4 screws that hold the base of the TV (the direction of
the arrows, reference image 1) and, remove the base (guard the screws and the base carefully).

3. Make or buy support with which the TV can be mounted on the wall, according to the size
of the part marked with the arrows in image 2 and 3.

4. Make 4 holes in the wall in the right place (the size is only for reference) and put the part of
the bracket that goes on the wall with the 4 screws (optional parts).

5. According to step 4, use a screwdriver to put the screws to the part of the bracket that goes
on the TV, for wall mounting.

B

Product family Centimeters VESA Specification (A*B) Standard Screw

Wall installation

A

C

<co>

Quantity

NOTE: "D" is the effective length of the thyme in the mounting hole.
The figures and illustrations in this manual are provided for reference only
and may different from your actual appearance. Product design and
specifications may change without prior notice.

Note:

1. Wall mounting bracket is an optional part.

2. When installing the TV, there should be no other items around or in front, please keep a
distance from other items.

3. When installing the TV, please ask qualified personnel about safety to avoid risks.

4. Installation images are for reference only.

5. Please follow the instructions in the manual about the installation of the TV.

6. The VESA wall mount kit is compatible with this TV.

4

AV Audio Inputs External AV

Headphone output(Earephone)

Video Inputs Y / VIDEO Pb Pr

U

SB input

HDMI input

Digital audio output(COAXIAL)

Connection for antenna ANT 75

O

ptical

Entrada VGA

P

C audio input

TV buttons and connection

TV buttons

Note: The following is a functional diagram only, the arrangement and
position of the buttons between the different models, may vary.

: To turn on / off the TV.

SOURCE: To select the external input signal.
MENU: To show the main MENU and confirm the selected menu option.
CH+/-: For the selection of channels.
VOL+/-: To perform the volume adjustment.

Connection terminals

Note: The following drawings show various connection terminals, the position,
the accommodation and the number between the different models may vary.

signal inputs and related sound
Right / Left,

Connections for video input from
your DVD / VCP
*Video input AV Y/VIDEO
* Composite video Y/VIDEO Pb
Pr

Digitel line input from an HDMI
video corrector.

When the headphones are
connected, the speakers are
deactivated

Connection for usb

digital audio output connection
to connect to the audio input of
an amplifier

Input connection of TV antenna
or cache (75WHF / UHF).

Entrada de sensl analoga ds PC.

Digital audio output

Audio input when you have the
VGA connection

5

Installation and Connection of the TV

TV installation

Put the TV in a firm place, which must support the
weight of the TV.
To avoid risks, please do not expose the TV to hot or
humid places (as well as near lights, candles
heaters), and do not block the ventilation on the
back of the TV.

Connection of antenna and power cord

1. Connect the antenna cable to the antenna input
terminal of the TV.

2. Connect the TV power cord
(100-240V ~ 50/60Hz)

Ignition of the TV

3. Press the power button of the TV and the
indicator light will turn green. If the indicator light is
in standby mode (the light is red), press the power
button on the remote control or TV panel.

Note:

Reference image only.

Installation instructions of the base

1. Open the box and remove the TV, accessories and base (some models do not contain a
base).

2. To avoid damaging the TV, place the unit upside down on a table covered with some soft
material, the base of the neck is assembled on the TV with screws.

3. Assemble the base to the TV.

4. The installation is complete.

6

Remote Control

Operation of the remote control

POWER

SLEEP

will automatically turn off

Buttons

EXIT

FAV

DEL

NUMERIC BUTTONS

MENU

CH+/-:

MOUSE

Without function.

Turn on or off (standby) the TV

Mute

Press to suspend the sound,

press again or press VOL + to
reset the sound

Select the time in which the TV

S.SMODE

Press repeatedly to cycle
through the available sound
modes.

P.MODE

Press repeatedly to go through
the modalities available image.

Allows you to navigate through the
menus on screen and adjust the
system according to your preference.

Press to exit the menu or sub­menu and cancel the function in
progress (if applicable).

DISPLAY

Press to see the source and
channel information.

: Select or cancel the

current channel as favorite.
HOME: A buttons to return to
the home page of android

E P G:

Electronic program guides.

: Delete.

CHLIST: Press in TV mode, to
display the channel list.
SET: Open the Configuration
menu of network.
ASPECT: Aspect function.

.

Press 0-9 to select a channel
directly when it is watching TV.
The channel changes after 2
seconds.

Press “-“to enter a multiple
channel number, as well as 2-

1.etc.

Return to the channel previously
Tuned.

Allow you to navigate in the
system of menus.

SOURCE

Press to change cyclically the
signal source of entry as follows:
TV->AV->YPBPR->HDMI->PC

->MEDIA

Press to change channel.

VOL+/-: Press to increase or
reduce the volume level.

MTS

Press to select the audio mode,
you can select Stereo. Mono or
SAP.

CC

Activate or deactivate the subtitle
menu.

Fast rewind in USB mode)
Fast forward (in USB mode)
Previous (in USB mode)
Next (in USB mode)
Stop (in USB mode)
Play / Pause (in USB mode)

: Start the Mouse of the

remote control.

EXPLORER: To open the browser.

RED / GREEN / YELLOW / CYAN:

7

I

nstallation of the batteries in the remote control

from the control

remote when it is not going to be used for a long period

.

1. Open the back cover.

2. Use AAA batteries. When inserting the batteries, make sure that the polarity is correct,
that is, that the "+" marks are oriented as indicated in the compartment.

3. Position the back cover.

To prevent battery leakage that may cause damage to the remote control.

1. Install the batteries correctly according to what is i ndicated on the remote control.

2. Do not mix the batteries, (old and new, carbon and alkaline, etc.) Remove the batteries

8

Main Screen

ENTER to enter the file browser, and select the file

wanted.

On the main screen, press the navigation arrows to select the icon memory and press

9

On the main screen, press the navigation arrows to select the icon search, press
ENTER to enter and perform the desired search.

On the main screen, press the navigation arrows to select the icon weather
information, and press ENTER to display the weather information page.
Press ENTER, to search and set the desired city.

10

Press the navigation arrows to select the information bar WHAT YOU NEED NEW, with the
navigation arrows select the desired video and press ENTER to reproduce it

Press the navigation arrows to select OUTSTANDING APPLICATION, with the navigation
arrows select the desired app and press ENTER to view or to install.

11

Press the navigation arrows to select APPLICATIONS, with the arrows of navigation
select the desired app that you have previously installed and press ENTER to start it

Press the navigation arrows to select MUSICA, with the navigation arrows select the
desired Music Video and press ENTER to play it.

Press the navigation arrows to select SPORTS, with the arrows of Navigation select the
desired Sports Video and press ENTER to play it.

12

Press the navigation arrows to select SOURCE, with the navigation arrows select the desired

characteristics to configure; as a network, language, among others.

Video Input Signal Source, Press ENTER to change the Source.

Press the navigation arrows to select the SETTINGS option, press ENTER to visualize the

Settings

13

Press the navigation arrows to select SETTINGS, with the navigation arrows select the features to
configure and press ENTER to adjust the values.

1) About:
Local system update: press ENTER to enter the interface of local update of the system.
System network update: press ENTER to enter the interface of system network update.

Model: Shows the model of the system

Version: Shows the current version of the Android System

14

TV Menu

Functions:

(1) Power: ENC / OFF (On: ON / OFF)
(2) Menu: Press the MENU button to display the TV menu. Press <EX1T>, to return to the
previous menu or to exit.
Source: You can change the font by pressing up / down buttons.
Submenu: You can modify some features by pressing left / right.
ENTER: Allows you to select the desired option such as changing the video input signal source
or menu characteristics by pressing the <ENTER> button.

Source

Press <SOURCE> to display the SOURCE menu.
Press ▲ / ▼ to select the desired Source and the <ENTER> button to confirm.

Image Settings

Press <MENU> to display the main menu, press ◄ / ► to select IMAGE, press ▲ / ▼
to select the desired option, press <MENU> to return, or <EXIT> to exit the menu.

15

Image mode: includes standard mode, soft, user, game, lived, natural, sports, bright,
where in user mode you can customize brightness, contrast, tint, and sharpness,
between others.

Color Temperature: Allows you to adjust the temperature of the color you feel
comfortable, such as standard, warm, cold.

16

Aspect ratio: Adjusts the image's viewing scale. Includes 16: 9, 4: 3, Auto, Zoom 1,
Zoom 2 mode.

Noise reduction: It allows to improve the image quality by reducing the noise in the
image.
The available modes are: auto, off, weak, medium and strong.

17

MPEG NR: Allows softening the video on the screen to reduce noise and improve the
image quality. The available modes are: weak, medium, strong.

Audio Configuration

Press <MENU> to display the main menu, press ◄ / ► to select AUDIO, press ▲ / ▼
to select the desired option, press <MENU> to return or press <EXIT> to exit the menu.

Sound mode: Select the Audio mode of your choice. In User mode, you can adjust bass

and treble in levels of your preference.

18

Equalizer setting (EQ): Select the equalizer setting to adjust the gain of the corresponding
frequencies, the adjustment range is from 0 to 100.

Balance: Adjust the speaker audio output balance (left / right), the adjustment range is
0-100.

Automatic volume: On / Off, when the volume exceeds the set value, it will automatically
reduce the volume to protect the amplifier.

19

Surround Sound: Select to activate / deactivate.

SPDIF Mode: Select Coaxial Output Mode (PCM / Off / Auto).

Channel Configuration

20

Press <MENU> to display the main menu, press ◄ / ► to select the menu CHANNEL,
press ▲ / ▼ to select and set the desired option, press <MENU> to return or press
<EXIT> to exit the menu.

Antenna: Select the type of antenna (Air / Cable).

Automatic Tuning: Select Auto Tuning, in the submenu, you can select the type of
search. Select Search to start the search automatically.

21

Edit program: Select to enter the submenu, press ▲ / ▼ to select the channel you want
to adjust with the following options: Skip, allows you to skip the selected channel. Edit,
rename the channel.1; AV, allows you to add or delete channels to the list of favorite
channels.

Signal Information: Shows information of the signal. Antenna Type, Channel, Intensity
of Signal and Signal Quality.

Adjustment

22

Press <MKNU> to display the main menu, press ◄ / ► to select the menu SETTINGS,
press ▲ / ▼ to select and adjust the desired option, press <MENU> to return or press
<EXIT> to exit the menu.

OSD language: Sets the menu language.

Audio Language: Sets the Audio language.

23

Subtitles: Activate / Deactivate subtitles.

CC Mode: Sets the CC Mode (Subtitles).

Start Mode: Sets the mode of use of the TV. Home Mode (Home), Shop Mode (Store).

24

Purchase Mode: Show / Hide EPOP (Electronic Tag)

HDMI_CEC: On / Off CEC.

HDMI_ARC: On / Off CEC.

25

Standby system: On / Off system in standby mode, (If activated, the TV will turn off
automatically when the Standby mode is started)

Device list: Select to show the list of devices.

Blue screen: On / Off blue screen.

26

Reset: Resets all settings to the default values. When this option is selected, it will show
a box to confirm the action.

Hour

Press <MENU> to display the main menu, press ◄ / ► to select the TIME menu, press
▲ / ▼ to select and set the desired option, press <MENU> to return or press <EXIT> to
exit the menu.

Time Menu: In this menu, the following options are included: System Date and Time,
Off Time and On-Screen Menu Time.

27

Bedtime: Set the sleep time, you can select from 10 minutes to 240 or cancel the action.

Menu time: The time to display the on-screen menu can be adjusted, in 5s / 10s / 15s /
20s / 30s / and always (always display).

To block

28

Press <MENU> to display the main menu, press * / ► to select the LOCK menu, press
▼ / A to select and set the desired option, press <MENU> to return or press <EXIT> to
exit the menu.

Blocking system: activate / deactivate system lock. It allows to enter the blocked system,
change lock password, and block channel and parental control.

Change the password: Select Change password and in the dialog box set the
New Password.

29

Block unrated TV: Block or unblock unrated TV shows.
USA Parental control: Restriction of movies and TV shows by US parental control
classification.
Canadian Parental Control: Restriction of movies and TV shows by Canadian parental
control rating.
RRT5 Configuration: Shows advanced classification table of V-Chip for digital channels.
This function is available only when the transmission has downloadable classification
data.
Reset RRT5: Reset RRT to the default values.
This function is available only when the transmission has downloadable classification
data.

30

Hotel Mode: Select to enter Hotel Mode.

31

OTA Local Update

It can be useful in several situations:

1) Depuration of the engineer

2) Customers to update

NOTE: This method is applied to the card to start the program with an Android system,
as follows.

1) The update file is placed in the root directory of U and then changes the name of
the file to "update_LDM538.zip".

2) Under "About," select "Local System Update," then click the "update" key to
enter the update.

As it's shown in the following:

Wait for the installation to complete.

32

Check that the AC power cord of the TV is connected. If the continuous

problem, disconnect the TV and connect it again after 60 seconds and

TV

The sound is fine

but there is no

The image has

It may be that the location of the antenna is not good. Put

No video input (PC

Vertical

It does not turn on

The received
signal is not
appropriate

There is no image

The image is fine
but there is no
sound

color

snow and noise
Lines on the
Image

Double image

TV does not
respond with
remote control

mode)

interference lines
(PC mode)
Horizontal
interference lines
(PC mode)

Faults Guide

try to turn on the TV again.

The cause of double image or ghosts is caused by tall
buildings or mountains that are around. You can adjust
the effect of the image manually: see the instructions or
change the address of the external antenna. If you use
an internal antenna, under certain circumstances,
reception will be more difficult. So you can change the
direction of the antenna to adjust the effect of the image.
If you can not change the effect of the received image,
you can use external antenna.
Check if the antenna is connected correctly in the part
later. Tune to another channel and check if the problem
continuous or not.
Increase the volume. Monitor if the TV is not in Silent
mode
(Mute)
Increase the contrast and brightness.

Check if the antenna connection is good or not.

Maybe an electrical device interferes, such as a hair
dryer, vacuum cleaner, cleaner or something similar,
please turn off that type of electrical device.

the antenna in a high place, to obtain a better image
quality.
Operate the remote control directly to the TV sensor. If
the TV is still not responding, check if the battery
placement is correct. It will change new batteries.
Check if the VGA video cable connection is correct.
Check if the VGA video cable is not damaged.
Enter the main menu, use the Clock controller to
eliminate the noise of vertical lines in the video.

Adjust the horizontal Audio sound in the main menu to
clean the horizontal lines.

33

The image is very

again. If the problem continues with your TV, do not try to

light or very dark
(PC mode)
The PC function
does not respond
Interference lines
in the RCA
connection source
If the problem
continues

Adjust the contrast or brightness level in the main menu.

Check the computer settings if the resolution is
compatible.
Make sure the good quality of the cables.

Unplug the power cord and wait 30 seconds, connect

repair it, please contact the service center.

Note: There will be full images that the brightness will be reduced if
the TV is with a static image for a long time. So please do not keep
the TV too long in a same menu or image whose brightness and
contrast are high.

34

User Manual

35