Sangean RS-332 User Manual

T H E W O R L D O F L I S T E N I N G

RS-332

.

Plugs into RS-330 for full Stereo System.

.

Controls all main unit clock functions.

.

Contains 4 watt amp with 5" full range speaker.

.

Turns into full range Stereo System

when plugged into RS-330.

DIGITAL ALARM

CLOCK EXTENSION UNIT

This Sangean RS-332 companion speaker unit is a stereo slave amplifier and
speaker for the Sangean RS-330 radio. Sangean's RS-332 is a powered speaker
and clock radio combo intended to complement Sangean's RS-330 clock radio.
When used with the Sangean RS-330, this unit offers stereo sound and complete,
dual - alarm, radio - wake - up freedom. The RS-332 is a model of clarity: its
fluorescent blue display is large and intuitively laid out, its two alarms are easy to
set, and its sound focuses though a single, natural - sounding speaker - identical
in size and timbre to the speaker in the RS-330. Audio feeds to the RS-332
through a supplied 18.5 - foot multipin cable, which also allows the RS-332 to
serve as alarm 2 for a second sleeper in this dual-alarm system. ( You can station
one clock on either side of the bed. ) Through the connection cable, the RS-332
can operate the RS-330, and vice versa. Conveniently, the RS-332's radio sets its
own presets ( 12 FM and 12 AM ) using Sangean's APS ( Auto - Program Setting ),
and reconfiguring those presets is a simple operation. Clock settings are a cinch,
as the RS-332 uses a single button ( just out of accidental reach) to toggle
through the main clock time and the settings for alarms 1 and 2. Using the
RS-330, you can set each alarm to wake with either radio or beeper, and the alarm
for the RS-332 gets its own volume knob on the unit's back panel. The alarm
level
functions independently of the master radio level, whether you've selected the
radio or the beeper for your alarm. This brings a certain freedom in listening - you
never have to worry about whether you've left the volume too loud or too quiet
for the next day's wake-up. For the alarm, the radio switches to mono reception,
rather than stereo, so that the first alarm to go off will not disturb the person
whose alarm is set to go off later. For radio listening, a large side knob handles
volume adjustments; you control bass and treble from the Sangean RS-330. The
RS-332 has a volume control switch on the back panel. When you switch this on,
the master volume knobs for the RS-332 and RS-330 operate independently of
one another - you must listen carefully to match the level for balanced stereo
sound. When you switch the volume control off, however, the RS-330 controls the
master level for both radios, though the alarm levels are still set independently.
For nighttime lullabies, the RS-332 offers a Sleep function. The default setting is
one hour, but you can set it anywhere from one minute to six hours by hitting
Sleep and adjusting the duration with the tuning ( up / down ) buttons.
Conversely, you can set a countdown timer for up to six hours using a Timer
button. The beeper, but not the radio, sounds at the end of the
countdown.

.

Controls all main unit clock

radio functions.

.

Independent Volume Control.

.

Functions as independent alarm clock.

.

Dimensions ( W x H x D ) :

10 4/5” x 6” x 3 4/9”

.

Weight : 4 lb. 10.1 oz.

2651 Troy Avenue South El Monte, CA 91733, U.S.A. TEL : [phone] FAX : [phone] E-mail : [e-mail] Website : www.sangean.com