Sandisk MOBILEMATE MEMORY STICK PLUS READER, MOBILE PREMIER MICROSD, MOBILEMATE MICRO MEMORY CARD READER, MOBILEMATE SD PLUS READER User Manual
SanDisk MobileMate™ Memory Stick™ Plus
English
You may register your product online at http://www.sandisk.com/registration
Failure to register your product will not diminish the rights you have under the
product warranty
SYSTEM REQUIREMENTS
Connection
• USB 2.0 port for Hi-Speed data transfer
Minimum Operating System Support
• Windows ME, 2000, XP, Vista
• Mac OS 9.2+, 10.1.2+
UNPACKING PACKAGE CONTENTS
• MobileMate Reader/Writer USB 2.0 (storage media not included)
CONNECTING
Connecting the MobileMate™ Memory Stick™ Plus Reader/Writer to the USB port
is simple. Plug the MobileMate Reader/Writer into the computer directly.
Windows Disk Icons:
Reader/ Writer on a Windows operating system, a newly assigned removable disk
icon drive letter representing the MobileMate Reader/Writer will be shown in My
Compu
ter.
Macintosh Disk Icons:
Macintosh operating system, a removable disk icon labeled “untitled” representing
the MobileMate Reader/Writer will show on the desktop when a card is inserted.
USING
The MobileMate™ Memory Stick™ Plus has two slots. The larger slot is used for
Memory Stick, Memory Stick Duo, and Memory Stick PRO Duo (no adapters
required). The smaller slot is used for Memory Stick Micro (M2) (no adapters required).
Inserting Cards
All cards are inserted with their label facing in the same direction as the reader/
writer side with the MobileMate
card into the slot.
LED Activity
The LED indicator turns on after a card is inserted correctly AND the MobileMate™
Memory Stick™ Plus Reader/Writer is connected correctly to the USB port on the
PC. The LED indicator is blinking when data is being transferred from or to the
card. To avoid losing data or corrupting the card, NEVER remove the card or
disconnect the MobileMate
ACTIVITY LED is FLASHING or BLINKING.
Removing Card
To remove the card in Windows:
• Ensure no data is being transferred and remove the card.
To remove the card on a Macintosh:
• Ensure no data is being transferred and remove the card.
Disconnecting
TO AVOID LOSING DATA OR CORRUPTING THE CARD YOU SHOULD NEVER
REMOVE THE DEVICE FROM THE USB PORT WITHOUT FIRST READING THE
STEPS BELOW.
Windows:
hotplug icon in the notification area of the taskbar to safely stop
Use the
the device.
These steps are not required for XP.
1. In the notification area, right-click on the hotplug icon
2. Select the device you want to unplug then click STOP
3. When Windows notifies that it is safe to do so, unplug the MobileMate
Reader/Writer from the computer
Macintosh:
1. Drag the MobileMate Reader/Writer “untitled” icon into the Trash.
2. Unplug the device.
Troubleshooting
For Frequently Asked Questions on error messages please go to our website at
http://www.sandisk.com/retail/support.asp
For assistance by phone please call toll free 866-SANDISK (866-726-3475),
7 days a week.
When you connect the MobileMate™ Memory Stick™Plus
When you connect the MobileMate Reader/Writer on a
™ Memory Stick™ Plus name. DO NOT force the
™ Memory Stick™ Plus USB 2.0 Reader/Writer when the
Loading...