Samsung X650 Service Manual

8. Disassembly and Assembly instructions

8-1. Disassembly

1) Unscrew the REAR at the

1

four points.

2) Disassemble the IF COVER

3) Disassemble the EAR COVER

2

1) Disassemble the Rear from the bottom side
to the upper side.

1) Be careful not to make scratch and molding damage! 1) Be careful not to make scratch and molding damage!

1) Disassemble the LCD CONNECTOR/IRDA WINDOW

3

2) Disassemble the PBA from the FRONT ASS'Y

3) Remove the FRONT TAPE

4) Disassemble the Keypad.

4

1) Push the hinge between Folder Upper and lower,

And Disassemble Front from Folder.

1) When PBA is separated from LCD Connector,
Be careful not to damage!

2) Be careful not to damage LCD FPCB!

SAMSUNG Proprietary-Contents may change without notice

This Document can not be used without Samsung's authorization

1) Be careful not to make scratch and molding damage!

2) Be careful not to damage LCD FPCB!

8-1

Disassembly and Assembly instructions

1) Remove screw caps.

5 6

2) Unscrew the FOLDER Upper.

SCREW CAP POINTS

1) Be careful not to make scratch and molding damage!

2) Be careful not to damage LCD FPCB!

1) By using an assembly stick, Disassemble
Folder Upper from Folder lower
(Right and Left are the same process)

1) Be careful not to make scratch and molding damage!

1) Disassemble the MOTOR and the SPEAKER

7 8

from FOLDER LOWER by using a pincette.

1) Be careful not to make scratch and molding damage!

1) Disassemble the Camera module and the

LCD FPCB when LCD module is disjointed.

1) Be careful not to damage the LCD FPCB and the

Camera module.

8-2

SAMSUNG Proprietary-Contents may change without notice

This Document can not be used without Samsung's authorization