Samsung WS-32Z31HE User Manual

COLOR

TELEVISION

Owner’s Instructions

Before operating the unit, please read this manual thoroughly,

and retain it for future reference.

ON-SCREEN MENUS

PICTURE IN PICTURE (OPTION)

TELETEXT

	Contents
CONNECTING AND PREPARING YOUR TELEVISION
■ View of Your Television (depending on the model) .......................................		5
■ Infrared Remote Control (depending on the model) ......................................		7
■ Inserting the Batteries in the Remote Control................................................		9
■ Connecting to an Aerial or Cable Television Network ...................................		9
■ Switching Your Television On and Off...........................................................		10
■ Placing Your Television in Standby Mode .....................................................		10
■ Becoming Familiar with the Remote Control .................................................		11
■ Plug & Play Feature.......................................................................................		12
■	Viewing the Demonstration............................................................................	13
■	Choosing Your Language..............................................................................	13
SETTING THE CHANNELS
■	Storing Channels Automatically.....................................................................	14
■ Sorting the Stored Channels .........................................................................		15
■	Storing Channels Manually............................................................................	16
■	Skipping Unwanted Channels .......................................................................	18
■ Assigning Names to Channels ......................................................................		19
■ Fine Tuning Channel Reception ....................................................................		20
USING YOUR TELEVISION
■ Using the LNA (Low Noise Amplifier) Feature (depending on the model).....		21
■ Changing the Picture Standard .....................................................................		21
■ Customizing the Picture Settings...................................................................		22
■ Selecting the Picture Size (depending on the model)....................................		23
■	Extra Picture Settings ....................................................................................	24
■ Setting the Blue Screen.................................................................................		25
■ Using the Tilt Control Feature........................................................................		25
■ Freezing the Current Picture .........................................................................		26
■ Changing the Sound Standard ......................................................................		26
■ Adjusting the Sound Settings ........................................................................		27
■ Extra Sound Settings (depending on the model)...........................................		28
■	Selecting the Melody .....................................................................................	29
■ Selecting the Sound Mode (depending on the model) ..................................		30
■ Setting and Displaying the Current Time.......................................................		31
■ Setting the Sleep Timer .................................................................................		32
■ Switching the Television On and Off Automatically .......................................		33
■ Setting the Preferred Volume Level/Channel ................................................		34
■ Viewing an External Signal Source/Edit Name (depending on the model)....		35
■ Viewing the Picture In Picture (PIP) (depending on the model) ....................		36

English - 3

	Contents (continued)
USING THE TELETEXT FEATURE
■	Teletext Feature ............................................................................................	38
■ Displaying the Teletext Information ...............................................................		38
■ Selecting a Page by Number.........................................................................		39
■ Using FLOF to Select a Page........................................................................		40
■	Storing Teletext Pages ..................................................................................	40
ADDITIONAL INFORMATION ON CONNECTIONS
■ Connecting to the External Input/Outputs......................................................		41
■ Connecting to the DVD Player or DTV receiver ............................................		42
■ Connecting to the Audio Output ....................................................................		43
■ Connecting to the RCA Input.........................................................................		43
■ Connecting to the S-Video Input....................................................................		44
■ Viewing Pictures From External Sources ......................................................		44
RECOMMENDATIONS FOR USE
■ Automatic Degaussing to Remove Color Patches.........................................		45
■ Troubleshooting: Before Contacting Service Personnel................................		45

Symbols
Press	Important	Note

English - 4

View of Your Television (depending on the model)

The actual configuration on your TV may be different, depending on your model.

Control Panels

Front of the TV

1

2

3

4

5

6

7

1) Input Source Selection

5) Power On/Off

2) Menu Display

6) Standby Indicator

3) Volume Adjustment

7) Remote Control Sensor

4)Channel Selection

You can use the CH buttons to switch on the TV when it is in standby mode.

The - VOL + and CH buttons have the same function as the …/†/œ/√ buttons on the remote control.

If the remote control no longer works or you have misplaced it, you can use the controls on the panel of the TV.

If you turn the TV off by pressing the POWER button on the front of the TV, you will not be able to turn the TV on using the POWER button on the remote control. (For more detailed information, refer to page 10.)

English - 5

View of Your Television (depending on the model) (continued)

Please be sure to match the color coded input terminals and cable jacks.

Connection Panels

Side of the TV (depending on the model)

S-Video Input

Video Input

S-Video Input

Video Input

Audio Input (L, R)

Audio Input (R, L)

Rear of the TV (depending on the model)

ŒMONITOR OUT (VIDEO / L-AUDIO-R)

Outputs for external devices.

´AV-1 INPUT (VCR) -VIDEO/AUDIO(L/R) AV-2 INPUT(VCR) -VIDEO/AUDIO(L/R)

Inputs for external devices, such as VCR, DVD, video game device, or video disc players.

ˇCOMPONENT 1 INPUT (DVD)/ COMPONENT 2 INPUT (DVD)

VIDEO (Y/PB/PR) and AUDIO (L/R) inputs for Component.

Available format for Component inputs ; 480i, 480p, 576i, 576p, 1080i - 50Hz

¨VHF/UHF (75Ω)

75Ω Coaxial connector for Aerial/Cable Network.

English - 6

Infrared Remote Control (depending on the model)

	TELEVISION STAND-BY
	PICTURE SIZE SELECTION
	SOUND MODE SELECTION	AUTOMATIC SWITCH-OFF
	DIRECT CHANNEL SELECTION
	ONE/TWO-DIGIT	SWITCH REPEATEDLY
	CHANNEL SELECTION
		BETWEEN THE LAST TWO
		CHANNELS DISPLAYED
	VOLUME INCREASE	NEXT CHANNEL
	TEMPORARY SOUND SWITCH-OFF	EXTERNAL INPUT SELECTION
	VOLUME DECREASE	PREVIOUS CHANNEL
		INFORMATION DISPLAY
	MENU DISPLAY	EXIT FROM ANY DISPLAY
	MOVE TO THE REQUIRED
	MENU OPTION/
	ADJUST AN OPTION VALUE
	RESPECTIVELY
	SOUND MENU DISPLAY	CONFIRM YOUR CHOICE
	TURBO SOUND	SOUND EFFECT SELECTION
		PICTURE EFFECT SELECTION
	STILL PICTURE
	DNIe DEMO

The performance of the remote control may be affected by bright light.

English - 7

Infrared Remote Control (depending on the model) (continued)

TELETEXT SIZE SELECTION

TELETEXT SUB-PAGE

TELETEXT PAGE HOLD

SUB PICTURE(PIP)

NEXT CHANNEL

PIP ON/OFF

PROGRAMME SELECTION BY NAME

SUB PICTURE(PIP) LOCATION SELECTION

SUB PICTURE(PIP) SOURCE SELECTION

TELETEXT DISPLAY/

MIX BOTH TELETEXT INFORMATION

AND THE NORMAL BROADCAST

TELETEXT STORE

TELETEXT NEXT PAGE

TELETEXT MODE SELECTION

(LIST/FLOF)

TELETEXT PREVIOUS PAGE

TELETEXT REVEAL/

SETUP MENU DISPLAY(W.LINK)

(depending on the model)

EXIT FROM ANY DISPLAY/

RETURN TO PREVIOUS MENU(W.LINK)

(depending on the model)

SUB PICTURE(PIP) SIZE SELECTION

SUB PICTURE(PIP) PREVIOUS

CHANNEL

FASTEXT TOPIC SELECTION

INTERCHANGE THE MAIN AND SUB

PICTURE (PIP)

W.LINK FUNCTION:(depending on the model)

- ROTATE - ZOOM

- REWIND - STOP

- PLAY/PAUSE

- FASR FORWARD

- W.LINK: TOGGLES BETWEEN WISE LINK AND TV MODE.

English - 8

Inserting the Batteries in the Remote Control

You must insert or replace the batteries in the remote control when you:

Purchase the television

Find that the remote control is no longer operating correctly

1Remove the cover on the rear of the remote control by pressing the symbol () downwards and then pulling firmly to remove it.

2 Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking care to respect the polarities:

- on the battery against - on the remote control+ on the battery against + on the remote control

3Replace the cover by aligning it with the base of the remote control and pressing it back into place.

Do not mix battery types, i.e. alkaline and manganese.

Connecting to an Aerial or Cable Television Network

To view television channels correctly, a signal must be received by the set from one of the following sources:

	An outdoor aerial
	A cable television network
	A satellite network
1	In the first three cases, connect the aerial or network input cable to	Rear of the TV
	the 75Ω coaxial socket on the rear of the television.
2	If you are using an indoor aerial, you may need to turn it when
	tuning your television until you obtain a picture that is both sharp	or
	and clear.
	For further details, refer to:	Cable Television
	“Storing Channels Automatically” on page 14
		Network
	“Storing Channels Manually” on page 16

English - 9

Switching Your Television On and Off

The mains lead is attached to the rear of your television.

1

Plug the mains lead into an appropriate socket.

The main voltage is indicated on the rear of the television

and the frequency is 50 or 60Hz.

2

Press the “ ” button (On/Off) on the front of the television.

Result:

The Standby indicator on the front of the television

lights up.

3Press the POWER () button on the remote control to switch the television on.

Result: The programme that you were watching last is reselected automatically.

If you have not yet stored any channels, No clear picture appears. Refer to “Storing Channels Automatically” on page 14 or “Storing Channels Manually” on page 16.

4To switch your television off, press the “” button (On/Off) again.

Placing Your Television in Standby Mode

English - 10

Your television can be placed in Standby mode, in order to reduce:

Power consumption

Wear of the cathode ray tube

The Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

1Press the POWER () button on the remote control.

Result: The screen is turned off and the Standby indicator on the front of the television lights up in red.

2To switch the television back on, simply press the POWER () button again.

You can also switch on by pressing the TV (), P/ , or numeric buttons.

Do not leave your television in Standby mode for long periods of time (when you are away on holiday, for example). Turn your television off by pressing the “” button (On/Off) on the front of the television. It is best to unplug the set from the mains and aerial.

Becoming Familiar with the Remote Control

The remote control is used mainly to:

Change channels and adjust the volume

Set up the television using the on-screen menu system

The following table presents the most frequently used buttons and their functions.

Button					Viewing Function					Menu Function
					Used to display the next				-
					stored channel.
					Used to display the previous -
					stored channel.
		to			Used to display the corresponding channels.
-/--					Used to select a channel numbered ten or over.
					Press this button, and the “--” symbol is displayed.
					Enter the two-digit channel number.
PRE-CH					Press the PRE-CH button. The TV will switch to the last
					channel viewed.
					To quickly switch between two channels that are far apart,
					tune to one channel, then use the number button to select
					second channel. Then, use the PRE-CH button to quickly
					alternate between them.
					Used to increase the				-
					volume.
					Used to decrease the				-
					volume.
MUTE					Used to switch the sound off temporarily.
					To turn the sound back on, press this button again, or
					press the	or				button.
MENU					Used to display the					Used to return to the previous
					on-screen menu system.					menu or normal viewing.
					-					Used to:
										Display a submenu
										containing selections for
										the current menu option
										Increase/decrease a
										menu option value
					-					Used to confirm your choice.
EXIT					-					Used to exit from the menu
										system and return to normal
										viewing directly.
	TV				Used to switch the					Used to exit from the menu
					television on when it is					system and return to normal
					in Standby mode.					viewing directly

English - 11

Plug & Play Feature

Plug & Play

	TV				Setup
			Plug & Play					√
			Language		œ English			√
			Time					√
			Blue Screen		: Off
			Melody		: 0n
			Demonstration					√
				œ √ Adjust		Skip
			Check antenna input.
		œ √ Move			Skip
	TV				Auto Store
			Area	œ ASIA/W.EUROPE				√
			Search	: -/+

Move

œ √ Adjust

Skip

TV

Time

Clock

-- : -- am

Sleep Timer

: Off

On Timer

-- : -- am Off

Off Timer

-- : -- am Off

On Timer Volume

: 10

On Timer Channel

: P 1

Move

œ √ Adjust

Skip

Enjoy your watching.

TV

Setup

Plug & Play

√

Language

: English

Time

√

Blue Screen

: Off

Melody

: 0n

Demonstration

√

Move

Enter

Return

When the television is initially powered on, three basic customer settings proceed automatically and subsequently: setting the language, channel and clock.

1If the television is in Standby mode, press the POWER () button on the remote control.

Result: The message Plug & Play is displayed. It flickers for a little while and then Language menu is automatically displayed.

2Select the appropriate language by pressing the œ or √ button. Press the MENU () button to enter the language.

Result: The message Check antenna input. is displayed.

If any language is not selected on the Language menu, the Language menu will disappear about 30 seconds later.

3Make sure that the antenna is connected to the TV. Press the œ or √ button.

Result: The Auto Store menu is displayed with Area selected.

4Select your area by pressing the œ or √ button. To search the channels, select Search by pressing the ▲ or ▼ button, then press the œ or √ button. Press the MENU () button to stop the search.

Result: The Time menu is displayed with Clock selected.

Refer to “Storing Channels Automatically” on page 14.

5Press the œ or √ button to move to the hour or minute. Set the hour or minute by pressing the ▲ or ▼ button.

Refer to “Setting and Displaying the Current Time” on page 31.

6When you have finished, press the MENU () button.

Result: The message Enjoy your watching. is displayed, and then the channel which has been stored will be activated.

7If you want to reset this feature...

1 Press the MENU () button.

2Press the ▲ or ▼ button to select Setup, then press the ENTER () button.

Result: The Plug & Play is selected.

3Press the ENTER () button again.

Result: This feature starts with the message Plug & Play is displayed.

When you wish to exit from the Plug & Play, press the EXIT () button on the remote control.

English - 12

Viewing the Demonstration

To become familiar with the various menus provided by your television, you can view the inbuilt demonstration.

1Press the MENU () button.

Result: The main menu is displayed.

2Press the ▲ or ▼ button to select Setup.

Result: The options available in the Setup group are displayed.

3Press the ENTER () button.

4Press the ▲ or ▼ button to select Demonstration.

5Press the ENTER () button.

Result: Each of the menu options is displayed in turn.

When you wish to exit from the demonstration, press the EXIT () button on the remote control.

TV	Setup
Plug & Play	√
Language	: English
Time	√
Blue Screen	: Off
Melody	: 0n
Demonstration	√

Move

Enter

Return

Choosing Your Language

When you start using your television for the first time, you must select the language which will be used for displaying menus and indications.

1Press the MENU () button.

Result: The main menu is displayed.

2Press the ▲ or ▼ button to select Setup.

Result: The options available in the Setup group are displayed.

3Press the ENTER () button.

4Press the ▲ or ▼ button to select Language.

5Select the appropriate language by pressing the œ or √ button repeatedly.

	TV					Setup
			Plug & Play			√
			Language		œ English √
			Time			√
			Blue Screen		: Off
			Melody		: 0n
			Demonstration			√
	Move			œ √ Adjust		Return

English - 13

Storing Channels Automatically

	TV					Channel
			Auto Store				√
			Manual Store				√
			Add/Delete				√
			Sort				√
			Name				√
			† More
	Move				Enter	Return
	TV					Auto Store
			Area		œ ASIA/W.EUROPE		√
			Search	: -/+

Move	œ √ Adjust	Return
TV	Auto Store
Area	: ASIA/W.EUROPE
Search	œ -/+	√

Move

œ √ Search

Return

P 1

106 MHz

7 %

Return

TV

Sort

From

œ P 1

√

To

: P--

Store

: ?

Move

œ √ Adjust

Return

You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch.

1Press the MENU () button.

Result: The main menu is displayed.

2Press the or button to select Channel.

Result: The options available in the Channel group are displayed.

3Press the ENTER () button.

Result: The Auto Store is selected.

4Press the ENTER () button again.

Result: The options available in the Auto Store group are displayed with Area selected.

5Select your area by pressing the œ or √ button. The areas are displayed in the following order:

ASIA/W.EUROPE - CIS/E.EUROPE - CHINA - HONG KONG/UK - AUSTRALIA - NZL/INDONESIA - SOUTH AFRICA - AMERICA

6Press the or button to select Search.

7Press the œ or √ button to start the search.

Result: The horizontal bar is displayed, and then channels are stored in an order which reflects their positions in the frequency range. Finally, the search will end automatically.

To stop the search before it has finished, press the MENU () button.

8When searching and storing are complete, the Sort menu is displayed.

To sort the stored channels into the desired numerical order, go to Step 6 of the “Sorting the Stored Channels” procedure on page 15.

To exit from the channel store function without sorting the

channels, press the MENU () button repeatedly until the menus disappear.

9When the channels have been stored, you can:

Sort them in the order required (refer to page 15)

Clear a channel (refer to page 18)

Assign a name to the stored channels (refer to page 19)

Fine tune channel reception if necessary (refer to page 20)

Activate the Digital Noise Reduction feature (refer to page 24)

English - 14

Sorting the Stored Channels

This operation allows you to change the programme numbers of stored channels. This operation may be necessary after using auto store. You can delete the channels you do not want to keep.

1Press the MENU () button.

Result: The main menu is displayed.

2Press the ▲ or ▼ button to select Channel.

Result: The options available in the Channel group are displayed.

3Press the ENTER () button.

4Press the ▲ or ▼ button to select Sort.

5Press the ENTER () button.

Result: The options available in the Sort group are displayed with From selected.

6Select the channel number that you wish to change by pressing the œ or √ button repeatedly.

7Press the ▲ or ▼ button to select To. Select the new channel number which you wish to identify by pressing the œ or √ button repeatedly.

You can also select the channel number directly by pressing the numeric buttons (0~9).

8Press the ▲ or ▼ button to select Store. Select OK to confirm the exchange of channel numbers by pressing the œ or √ button.

Result: The selected channel is exchanged with the one previously stored to the chosen number.

9For all the channels to move to the required channel numbers, repeat steps 6 to 8 after selecting the From by pressing the ▲ or ▼ button.

	TV						Channel
			Auto Store					√
			Manual Store					√
			Add/Delete					√
			Sort					√
			Name					√
			† More
	Move					Enter		Return
	TV							Sort
			From				œ P 1	√
			To				: P--
			Store				: ?
	Move			œ √ Adjust				Return
	TV							Sort
			From				: P 1
			To				œ P 3	√
			Store				: ?
	Move			œ √ Adjust				Return
	TV							Sort
			From				: P 3
			To				: P 1
			Store				œ OK	√

Move

œ √ Adjust

Return

English - 15