Samsung WS-32M066V, CW-29M166V User Manual

COLOUR TELEVISION
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
TELETEXT
Register your product at www.samsung.com/global/register
(OPTION)
Contents
CONNECTING AND PREPARING YOUR TELEVISION
View of Your Television (depending on the model) ....................................... 5
Infrared Remote Control ................................................................................ 6
Inserting the Batteries in the Remote Control................................................ 8
Connecting to an Aerial or Cable Television Network ................................... 8
Switching Your Television On and Off........................................................... 9
Placing Your Television in Standby Mode..................................................... 9
Becoming Familiar with the Remote Control ................................................. 10
Plug & Play Feature....................................................................................... 11
Viewing the Demonstration............................................................................ 12
Choosing Your Language.............................................................................. 12
SETTING THE CHANNELS
Storing Channels Automatically..................................................................... 13
Sorting the Stored Channels ......................................................................... 14
Storing Channels Manually............................................................................ 15
Skipping Unwanted Channels ....................................................................... 17
Assigning Names to Channels ...................................................................... 18
Fine Tuning Channel Reception.................................................................... 19
USING YOUR TELEVISION
Using the LNA (Low Noise Amplifier) Feature (depending on the model)..... 20
Changing the Picture Standard ..................................................................... 21
Customizing the Picture Settings................................................................... 22
Selecting the Picture Size (depending on the model).................................... 23
Selecting the Digital NR................................................................................. 24
Using the Tilt Control Feature........................................................................ 25
Setting the Blue Screen................................................................................. 25
Freezing the Current Picture ......................................................................... 26
Changing the Sound Standard ...................................................................... 26
Adjusting the Sound Settings ........................................................................ 27
Extra Sound Settings (depending on the model)........................................... 28
Selecting the Sound Mode (depending on the model) .................................. 29
Selecting the Melody ..................................................................................... 30
Setting and Displaying the Current Time....................................................... 31
English - 3
Contents (continued)
USING YOUR TELEVISION (continued)
Setting the Sleep Timer ................................................................................. 32
Switching the Television On and Off Automatically ....................................... 33
Setting the Preferred Volume Level/Channel ................................................ 34
Viewing an External Signal Source/Edit Name (depending on the model).... 35
Viewing the Picture In Picture (PIP) (depending on the model) .................... 36
USING THE TELETEXT FEATURE
Teletext Feature ............................................................................................ 39
Displaying the Teletext Information ............................................................... 39
Selecting a Page by Number......................................................................... 40
Using FLOF to Select a Page........................................................................ 41
Storing Teletext Pages .................................................................................. 41
ADDITIONAL INFORMATION ON CONNECTIONS
Connecting to the External Input/Outputs (depending on the model)............ 42
Connecting to the RCA Input (depending on the model)............................... 43
Connecting to the S-Video Input (depending on the model).......................... 43
Viewing Pictures From External Sources ...................................................... 44
RECOMMENDATIONS FOR USE
Automatic Degaussing to Remove Colour Patches....................................... 45
Troubleshooting: Before Contacting Service Personnel................................ 45
English - 4
Symbols
Press Important Note

View of Your Television (depending on the model)

4
5
6 2
1
3
4
5
67 3
1
2
4
5
6312
6
2
1
4
5
3
7
5
6
7
4
1
2
3
The actual configuration on your TV may be different, depending on
your model.
Control Panels
1) Power On/Off
2) Standby Indicator
3) Remote Control Sensor
4) Channel Selection
Connection Panels
Side of the TV
S-Video Input
Video Input
Audio Input (R, L)
5) Volume Adjustment
6) Menu Display
7) Input source selection
Rear of the TV
SCART Audio/
Video Input/Output
75Coaxial Connector for Aerial/Cable Network
English - 5

Infrared Remote Control

TELEVISION STAND-BY
DIRECT CHANNEL SELECTION
ONE/TWO-DIGIT
CHANNEL SELECTION
VOLUME INCREASE
TEMPORARY SOUND SWITCH-OFF
VOLUME DECREASE
MENU DISPLAY
MOVE TO THE REQUIRED
ADJUST AN OPTION VALUE
SOUND MODE SELECTION
MENU OPTION/
RESPECTIVELY
SOUND MENU DISPLAY
TURBO SOUND
PICTURE SIZE
SWITCH REPEATEDLY BETWEEN THE LAST TWO CHANNELS DISPLAYED
NEXT CHANNEL
EXTERNAL INPUT SELECTION
PREVIOUS CHANNEL
INFORMATION DISPLAY
EXIT FROM ANY DISPLAY
CONFIRM YOUR CHOICE
SOUND EFFECT SELECTION
PICTURE EFFECT SELECTION
STILL PICTURE
AUTOMATIC SWITCH-OFF
English - 6
The performance of the remote control may be affected by bright light.
Infrared Remote Control (continued)
TELETEXT PAGE HOLD
SUB PICTURE(PIP)
NEXT CHANNEL
MIX BOTH TELETEXT INFORMATION
AND THE NORMAL BROADCAST
TELETEXT DISPLAY/
TELETEXT NEXT PAGE
TELETEXT MODE SELECTION (LIST/FLOF)
TELETEXT PREVIOUS PAGE
TELETEXT REVEAL
PROGRAMME
SELECTION BY NAME
SUB PICTURE(PIP)
LOCATION SELECTION
FASTEXT TOPIC SELECTION
TELETEXT SUB-PAGE
PIP ON/OFF
TELETEXT SIZE SELECTION
SUB PICTURE(PIP)
SOURCE SELECTION
SUB PICTURE(PIP) SIZE SELECTION
SUB PICTURE(PIP) PREVIOUS CHANNEL
TELETEXT STORE
INTERCHANGE THE MAIN AND SUB PICTURE (PIP)
English - 7

Inserting the Batteries in the Remote Control

You must insert or replace the batteries in the remote control when you:
Purchase the television
Find that the remote control is no longer operating
correctly
1 Remove the cover on the rear of the remote control by pressing
the symbol ( ) downwards and then pulling firmly to remove it.
2 Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking
care to respect the polarities:
◆-on the battery against -on the remote control
+ on the battery against + on the remote control
3 Replace the cover by aligning it with the base of the remote
control and pressing it back into place.
Rear of the TV

Connecting to an Aerial or Cable Television Network

To view television channels correctly, a signal must be received by the set from one of the following sources:
An outdoor aerial
A cable television network
A satellite network
1 In the first three cases, connect the aerial or network input cable to
the 75coaxial socket on the rear of the television.
or
Cable Television
Network
2 If you are using an indoor aerial, you may need to turn it when
tuning your television until you obtain a picture that is both sharp and clear. For further details, refer to:
“Storing Channels Automatically ” on page 13
“Storing Channels Manually” on page 15
English - 8

Switching Your Television On and Off

The mains lead is attached to the rear of your television.
1 Plug the mains lead into an appropriate socket.
The main voltage is indicated on the rear of the television
and the frequency is 50 or 60Hz.
2 Press the “ ” button (On/Off) on the front of the television.
Result
: The Standby indicator on the front of the television
lights up.
3 Press the POWER () button on the remote control to switch the
television on.
Result
: The programme that you were watching last is
re-selected automatically.
If you have not yet stored any channels, No clear picture
appears. Refer to “Storing Channels Automatically” on page 13 or “Storing Channels Manually” on page 15.
4 To switch your television off, press the “ ” button (On/Off) again.

Placing Your Television in Standby Mode

Your television can be placed in Standby mode, in order to reduce:
Power consumption
Wear of the cathode ray tube
The Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1 Press the POWER () button on the remote control.
Result
: The screen is turned off and the Standby indicator on
the front of the television lights up in red.
2 To switch the television back on, simply press the POWER ()
button again.
You can also switch on by pressing the TV ( ), P or
, or numeric buttons.
Do not leave your television in Standby mode for long
periods of time (when you are away on holiday, for example). Turn your television off by pressing the “ ” button (On/Off) on the front of the television. It is best to unplug the set from the mains and aerial.
English - 9

Becoming Familiar with the Remote Control

The remote control is used mainly to:
Change channels and adjust the volume
Set up the television using the on-screen menu system
The following table presents the most frequently used buttons and their functions.
Button Viewing Function Menu Function
Used to display the next stored channel.
Used to display the previous stored channel.
to Used to display the corresponding channels.
-/--
PRE-CH Press the PRE-CH button. The TV will switch to the last
MUTE Used to switch the sound off temporarily.
Used to select a channel numbered ten or over. Press this button, and the “ Enter the two-digit channel number.
channel viewed. To quickly switch between two channels that are far apart,
tune to one channel, then use the number button to select second channel. Then, use the PRE-CH button to quickly alternate between them.
Used to increase the volume.
Used to decrease the volume.
To turn the sound back on, press this button again, or
press the or button.
-
-
--
” symbol is displayed.
-
-
English - 10
MENU Used to display the Used to return to the previous
EXIT
TV Used to switch the
on-screen menu system. menu or normal viewing.
-
-
-
television on when it is in Standby mode.
Used to:
Display a submenu containing selections for the current menu option
Increase/decrease a menu option value
Used to confirm your choice.
Used to exit from the menu system and return to normal viewing directly.

Plug & Play Feature

When the television is initially powered on, three basic customer settings proceed automatically and subsequently: setting the language, channel and clock.
Plug & Play
1 If the television is in Standby mode, press the POWER () button
on the remote control.
Result
: The message Plug & Play is displayed. It flickers for
a little while and then
Language menu is automatically
displayed.
2 Select the appropriate language by pressing the ▲ or button.
Press the
Result
: The message
If any language is not selected on the Language menu, the
Language menu will disappear about 30 seconds later.
MENU
()
button to enter the language.
Check antenna input. is displayed.
3 Make sure that the antenna is connected to the TV.
Press the
Result
œ or button.
: The
selected.
Auto Store menu is displayed with Country is
4 Select your country by pressing the œ or button. To search the
channels, select press the search.
Result
: The Time menu is displayed with Clock selected.
Refer to “Storing Channels Automatically” on page 13.
Search by pressing the ▲ or button, and then
œ or button. Press the MENU
()
button to stop the
5 Press the œ or button to move to the hour or minute. Set the
hour or minute by pressing the
Refer to “Setting and Displaying the Current Time” on page
31.
6 When you have finished, press the MENU
Result
: The message Enjoy your watching. is displayed,
and then the channel which has been stored will be activated.
or button.
()
button.
TV
English
Deutsch Français Nederland Español Italiano Svenska Português
∂ППЛУИО¿
âe‰tina
Move Skip
Check antenna input.
œœ
Move Skip
TV
Country
Search : -/+
Move
TV
Clock -- : --
Sleep Timer : Off On Timer -- : -- Off Off Timer -- : -- Off On Timer Volume : 10 On Timer Channel : 1
Move
Srpski Hrvatski
Român™
Magyar Polski
кЫТТНЛИ Е˙О„‡ТНЛ
Türkçe Norsk Dansk Suomi
Auto Store
œœ
Belgium
œœ
Adjust Skip
œœ
Adjust Skip
Language
Time
7 If you want to reset this feature...
1 Press the MENU
2 Press the or button to select Setup, and then press the
ENTER () button.
Result
: The Plug & Play is selected.
3 Press the ENTER () button again.
Result
: This feature starts with the message Plug & Play
()
button.
is displayed.
Enjoy your watching.
TV
Plug & Play
Language : English Time Blue Screen : Off Melody : On Demonstration
Move Enter Return
English - 11
Setup

Viewing the Demonstration

To become familiar with the various menus provided by your television, you can view the inbuilt demonstration.
TV
Plug & Play Language : English Time Blue Screen : Off Melody : On
Demonstration
Move Enter Return
Setup

Choosing Your Language

1 Press the MENU
Result
: The main menu is displayed.
()
button.
2 Press the ▲ or button to select Setup.
Result
: The options available in the Setup group are
displayed.
3 Press the ENTER () button.
4 Press the or button to select Demonstration.
5 Press the ENTER () button.
Result
: Each of the menu options is displayed in turn.
When you wish to exit from the demonstration, press the
EXIT () button on the remote control.
TV
Plug & Play
LanguageœœEnglish
Time Blue Screen : Off Melody : On Demonstration
Move Enter Return
TV
English
Deutsch Français Nederland Español Italiano Svenska Português
∂ППЛУИО¿
âe‰tina
Move Return
Srpski Hrvatski
Român™
Magyar Polski
кЫТТНЛИ Е˙О„‡ТНЛ
Türkçe Norsk Dansk Suomi
Setup
Language
English - 12
When you start using your television for the first time, you must select the language which will be used for displaying menus and indications.
1 Press the MENU
Result
: The main menu is displayed.
()
button.
2 Press the ▲ or button to select Setup.
Result
: The options available in the Setup group are
displayed.
3 Press the ENTER () button.
4 Press the or button to select Language.
5 Press the ENTER () button.
Result
: The options available in the Language group are
displayed.
6 Select the appropriate language by pressing the ▲ or button
repeatedly.

Storing Channels Automatically

You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch.
1 Press the MENU
Result
: The main menu is displayed.
2 Press the ▲ or button to select Channel.
Result
: The options available in the Channel group are
3 Press the ENTER () button.
Result
: The Auto Store is selected.
4 Press the ENTER () button again.
Result
: The options available in the Auto Store group are
()
button.
displayed.
displayed with
Country is selected.
TV
Auto Store
Manual Store Add/Delete Sort Name
More
Move Enter Return
TV
Country
Search : -/+
Move
œœ
œœ
Adjust Return
Channel
Auto Store
Belgium
5 Select your country by pressing the œ or button. The areas are
displayed in the following order:
France - Italy - Netherlands - Sweden - Switzerland - United Kingdom
- Others - Eastern Europe
Belgium - Germany - Spain -
6 Press the or button to select Search.
7 Press the œ or button to start the search.
Result
: The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the frequency range. Finally, the search will end automatically.
To stop the search before it has finished, press the MENU
()
button.
8 When searching and storing are complete, the Sort menu is
displayed.
To sort the stored channels into the desired numerical order, go to Step on page 14.
To exit from the channel store function without sorting the channels, press the menus disappear.
9 When the channels have been stored, you can:
Sort them in the order required (refer to page 14)
Skip Unwanted Channels (refer to page 17)
Assign a name to the stored channels (refer to page 18)
Fine tune channel reception if necessary (refer to page 19)
Activate the Digital Noise Reduction feature (refer to page 24)
6 of the “Sorting the Stored Channels” procedure
()
MENU
button repeatedly until the
TV
Country : Belgium
Search
Move
P 1 C-- ----­106 MHz 7 %
Return
TV
Move
œœ
From
To : P-- ----­Store : ?
œœ
Auto Store
œœ
-/+
Search Return
œœ
P 1 -----
Adjust Return
Sort
English - 13

Sorting the Stored Channels

TV
Auto Store Manual Store Add/Delete
Sort
Name
More
Move Enter Return
TV
From
To : P-- ----­Store : ?
Move
TV
œœ
Adjust Return
From : P 1 -----
To
Store : ?
Channel
œœ
P 1 -----
œœ
P 2 -----
Sort
Sort
This operation allows you to change the programme numbers of stored channels. This operation may be necessary after using auto store. You can delete the channels you do not want to keep.
1 Press the MENU
Result
: The main menu is displayed.
()
button.
2 Press the ▲ or button to select Channel.
Result
: The options available in the Channel group are
displayed.
3 Press the ENTER () button.
4 Press the or button to select Sort.
5 Press the ENTER () button.
Result
: The options available in the
with
From is selected.
Sort group are displayed
6 Select the channel number that you wish to change by pressing
the
œ or button repeatedly.
7 Press the ▲ or button to select To. Select the new channel
number which you wish to identify by pressing the repeatedly.
You can also select the channel number directly by pressing
the numeric buttons (0~9).
œ or button
Move
TV
Move
œœ
Adjust Return
From : P 2 ----­To : P 1 -----
Store
œœ
œœ
Adjust Return
OK
Sort
8 Press the ▲ or button to select Store. Select OK to confirm the
exchange of channel numbers by pressing the
Result
: The selected channel is exchanged with the one
previously stored to the chosen number.
œ or button.
9 For all the channels to move to the required channel numbers,
repeat steps button.
6 to 8 after selecting the From by pressing the or
English - 14

Storing Channels Manually

You can store up to 100 television channels, including those received via cable networks.
When storing channels manually, you can choose:
Whether or not to store each of the channels found
The programme number of each stored channel which
you wish to identify
1 Press the MENU
Result
: The main menu is displayed.
2 Press the ▲ or button to select Channel.
Result
: The options available in the Channel group are
3 Press the ENTER () button.
()
displayed.
button.
TV
Auto Store
Manual Store
Add/Delete Sort Name
More
Move Enter Return
TV
Programme
Colour System : AUTO Sound System : DK Search : 0MHz Channel : C-­Store : ?
Channel
Manual Store
œœ
P 1 -----
4 Press the or button to select Manual Store.
5 Press the ENTER () button.
Result
: The options available in the Manual Store group are
displayed with
Programme is selected.
6 To assign a programme number to a channel, press the œ or
button.
7 Press the ▲ or button to select Colour System. Indicate the
broadcasting standard required by pressing the repeatedly.
Result
: The colour standards are displayed in the following
order: AUTO - PAL - SECAM - NT4.43
œ or button
8 Press the ▲ or button to select Sound System. Select the
sound standard required by pressing the repeatedly.
Result
: The sound standards are displayed in the following
order: BG - DK - I - L
œ or button
Move
TV
Move
TV
Move
œœ
Adjust Return
Manual Store
Programme : P 1 -----
Colour System
Sound System : DK Search : 0MHz Channel : C-­Store : ?
œœ
Adjust Return
Manual Store
Programme : P 1 ----­Colour System : AUTO
Sound System
Search : 0MHz Channel : C-­Store : ?
œœ
Adjust Return
œœ
œœ
AUTO
DK
English - 15
Loading...
+ 33 hidden pages