Samsung WEP180 User Manual

Features and
Functions Guide

SAMSUNG
Bluetooth

WEP180

Important:

Be sure to first follow the
Quick Start Guide on
the reverse side of this guide
to complete initial setup
of your headset.

®

Headset

Turn the headset on/off

To turn the headset on,

Press and hold the Multi-Function button for
4 seconds until you see 4 blue flashes on the
indicator light, then release.
You will hear a tone and see the indicator light
flashes while the power is on
(see Meaning of the indicator light of this guide).

To turn the headset off,
Press and hold the Multi-Function button for

4 seconds until you see blue flashes on the indicator
light, then release.
You will hear series of 2 tones and see the indicator
light stops flashing.

Wear the headset Use the ear hook

Wear the headset on your ear.
In general, you will get better performance
when there are no obstructions
(including parts of your body)
between the headset
and the phone.

Attach the supplied hook to the headset to make
wearing the earpiece more comfortable.

Depending on which ear you are going to wear the
headset, simply adjust the hook accordingly.

Left Right

Troubleshooting

My phone does not find my headset.

Make sure the blue indicator light on your
headset turns on when your phone is
searching for devices.

My headsest worked before but now it is
not working.

Make sure your phone is on and the Bluetooth
feature is turned on in your phone.
If the Bluetooth feature has been turnned off
or was turned on only temporarily, you may
need to restart the Bluetooth feature.
If you have confirmed the Bluetooth feature is
on in your phone, pair your phone and
headset again.

Headquarters:

1301 East Lookout Drive Suite 150
Richardson, TX 75082

Internet Address:

http://www.samsungmobileusa.com/
accessories

Customer Care Center:

1-888-987-4357

Make calls

Make a voice activated call

If the phone’s voice recognition feature is on, you can
make a voice activated call.

1

Press the Multi-Function button once. You will hear the

voice-activation tone.

2

Say the name of the person you wish to call.

Depending on your phone, this feature may not be
supported.

Redial the last number

When the headset is connected with the phone via the
Hands-free profile, press and hold the Multi-Function
button.

When the headset is connected with the phone via the
Headset profile:

1

Press the Multi-Function button to access the recent

call list.

2

If necessary, press [] or [] to scroll to the number

you want.

3

Press the Multi-Function button to dial the selected

number.

End a call

Press the Multi-Function button.

Answer a call

When a call comes in, the headset sounds the ring tone
and flashes the blue indicator twice. Press the Multi­Function button.

Adjust the volume

Press [] on the side of the headset to increase the volume
level and press [] to decrease the volume level.

Use enhanced features

Enhanced features are available for phones that support the
hands-free Bluetooth profile and enhanced features.

• Reject a call
When you receive a call, press and hold the Multi-Function
button to reject the call. Depending on your
phone's setting or type, this feature may not be
supported.

• Answer a second call

When your phone notifies you of another incoming call while
you are on a call, press and hold the Multi-Function button.
You can switch between calls by pressing and holding it again.
Depending on your phone, this feature may not be supported.

• Place a call on hold

While you are on a call, press and hold the Multi-Function
button.
To retrieve the call, press and hold the Multi-Function button
again.
Depending on your phone, this feature may not be supported.

Meaning of the indicator light

Light

Flashes in
blue every
8 seconds.

Flashes in
blue every 3
seconds.

Flashes in
red instead
of blue.

*Depending on the phone type and usage, the actual time

may vary.

Tone

Quick series
of 2 tones.
(Active mode
starts.)

Quick series
of 2 tones.
(Standby
mode starts.)

5 tones every
20 seconds.

The headset is in Active mode.

• The headset has an active
call in progress.

• You can talk up to 6 hours.

The headset is in Standby mode.

• The headset is waiting
for a call.

• The headset can be in
Standby mode up to 110
hours.*

The battery of the headset is
low.

• There is less than 10% of
battery power left. Recharge
the battery.

Status