Samsung WDF210M User Manual

User Manual

WDF210M

802.11b/g/n WLAN Module

Version 1.0

Samsung Electronics

page 1 of 9

Revision History

0.12013-10-18 Created

1.General Descriptions

WDF210M is a Wi-Fi module compliant with IEEE802.11 b.g.n MAC/baseband/radio optimized for lowpower applications. The core chipset is from Mediatek, part number MT7601U.

The MT7601U is a highly integrated Wi-Fi single chip which supports 150 Mbps PHY rate. It fully complies with IEEE 802.11n and IEEE 802.11 b/g standards, offering feature-rich wireless connectivity at high standards, and delivering reliable, cost-effective throughput from an extended distance. Optimized RF architecture and baseband algorithms provide superb performance and low power consumption. Intelligent MAC design deploys a high efficient DMA engine and hardware data processing accelerators which offloads the host processor.

The WDF210M is designed to support standard based features in the areas of security, quality of service and international regulations, giving end users the greatest performance any time and in any

circumstance.

2. Features

_ IEEE 802.11 b/g/n client

_ Embedded high-performance 32-bit RISC microprocessor _ Highly integrated RF with 55nm CMOS technology

_ 1T1R mode with support of 150Mbps PHY rate _ Integrate high efficiency switching regulator

_ Best-in-class power consumption performance _ Compact 5mm x 5mm QFN40L package

_ 1/2/3/4-wire PTA Wi-Fi / Bluetooth coexistence support _ 802.11 d/h/k compliant

_ Security support for WFA WPA/WPA2 personal, WPS2.0, WAPI _ Supports 802.11w protected managed frames

_ QoS support of WFA WMM, WMM PS _ Supports Wi-Fi Direct

_ Fully compliance with USB v2.0 High-speed mode _ Per packet transmit power control

_ Antenna diversity

Version 1.0

Samsung Electronics

page 2 of 9

3. Applications

4 Dimension and Pin Assignments

4.1 Mechanical Dimension

Version 1.0

Samsung Electronics

page 3 of 9